Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KenTIP

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (16)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(16)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(16)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(16)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
    • M Stainless Steel (3)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
    • K Cast Iron (16)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(16)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(16)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(16)
    • N Non-Ferrous Materials (3)
      • N1
        Wrought Aluminum (3)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(3)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
      • N6
        Carbon, Graphite Composites, CFRP (3)
    Cutting Diameter
    Cutting Diameter
    • 0.313 in(1)
    • 0.315 in(1)
    • 0.319 in(1)
    • 0.322 in(1)
    • 0.323 in(1)
    • 0.327 in(1)
    • 0.328 in(1)
    • 0.331 in(1)
    • 0.332 in(1)
    • 0.335 in(2)
    • 0.336 in(2)
    • 0.339 in(2)
    • 0.343 in(2)
    • 0.345 in(2)
    • 0.347 in(2)
    • 0.349 in(2)
    • 0.351 in(2)
    • 0.374 in(1)
    • 0.375 in(1)
    • 0.376 in(1)
    • 0.377 in(1)
    • 0.378 in(1)
    • 0.382 in(1)
    • 0.386 in(1)
    • 0.387 in(1)
    • 0.39 in(1)
    • 0.391 in(1)
    • 0.394 in(2)
    • 0.395 in(2)
    • 0.397 in(2)
    • 0.398 in(2)
    • 0.402 in(2)
    • 0.404 in(2)
    • 0.406 in(2)
    • 0.408 in(2)
    • 0.41 in(2)
    • 0.414 in(2)
    • 0.453 in(1)
    • 0.457 in(1)
    • 0.461 in(1)
    • 0.465 in(1)
    • 0.47 in(1)
    • 0.473 in(1)
    • 0.477 in(1)
    • 0.48 in(1)
    • 0.484 in(1)
    • 0.488 in(1)
    • 0.491 in(1)
    • 0.551 in(3)
    • 0.555 in(3)
    • 0.559 in(3)
    • 0.564 in(3)
    • 0.568 in(3)
    • 0.572 in(1)
    • 0.576 in(1)
    • 0.578 in(1)
    • 0.579 in(1)
    • 0.583 in(1)
    • 0.587 in(1)
    • 0.591 in(2)
    • 0.594 in(2)
    • 0.595 in(2)
    • 0.598 in(2)
    • 0.602 in(2)
    • 0.605 in(2)
    • 0.606 in(2)
    • 0.609 in(2)
    • 0.61 in(2)
    • 0.614 in(2)
    • 0.618 in(2)
    • 0.622 in(2)
    • 0.625 in(2)
    • 0.628 in(2)
    • 0.63 in(2)
    • 0.631 in(2)
    • 0.633 in(2)
    • 0.634 in(2)
    • 0.638 in(2)
    • 0.641 in(2)
    • 0.642 in(2)
    • 0.646 in(2)
    • 0.65 in(2)
    • 0.654 in(2)
    • 0.656 in(2)
    • 0.657 in(2)
    • 0.661 in(2)
    • 0.664 in(2)
    • 0.665 in(2)
    • 0.709 in(1)
    • 0.713 in(1)
    • 0.717 in(1)
    • 0.719 in(1)
    • 0.72 in(1)
    • 0.724 in(1)
    • 0.728 in(1)
    • 0.732 in(1)
    • 0.734 in(1)
    • 0.736 in(1)
    • 0.74 in(1)
    • 0.744 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 7.95 mm(1)
    • 8.0 mm(1)
    • 8.1 mm(1)
    • 8.175 mm(1)
    • 8.201 mm(1)
    • 8.3 mm(1)
    • 8.326 mm(1)
    • 8.4 mm(1)
    • 8.425 mm(1)
    • 8.5 mm(2)
    • 8.525 mm(2)
    • 8.6 mm(2)
    • 8.701 mm(2)
    • 8.725 mm(2)
    • 8.8 mm(2)
    • 8.85 mm(2)
    • 8.9 mm(2)
    • 9.5 mm(1)
    • 9.525 mm(1)
    • 9.55 mm(1)
    • 9.576 mm(1)
    • 9.601 mm(1)
    • 9.701 mm(1)
    • 9.8 mm(1)
    • 9.826 mm(1)
    • 9.9 mm(1)
    • 9.925 mm(1)
    • 10.0 mm(2)
    • 10.025 mm(2)
    • 10.076 mm(2)
    • 10.101 mm(2)
    • 10.201 mm(2)
    • 10.25 mm(2)
    • 10.3 mm(2)
    • 10.326 mm(2)
    • 10.4 mm(2)
    • 10.5 mm(2)
    • 11.5 mm(1)
    • 11.601 mm(1)
    • 11.701 mm(1)
    • 11.8 mm(1)
    • 11.9 mm(1)
    • 12.0 mm(1)
    • 12.101 mm(1)
    • 12.201 mm(1)
    • 12.3 mm(1)
    • 12.4 mm(1)
    • 12.476 mm(1)
    • 14.0 mm(3)
    • 14.101 mm(3)
    • 14.201 mm(3)
    • 14.3 mm(3)
    • 14.4 mm(3)
    • 14.5 mm(1)
    • 14.601 mm(1)
    • 14.675 mm(1)
    • 14.701 mm(1)
    • 14.8 mm(1)
    • 14.9 mm(1)
    • 15.0 mm(2)
    • 15.076 mm(2)
    • 15.101 mm(2)
    • 15.201 mm(2)
    • 15.3 mm(2)
    • 15.375 mm(2)
    • 15.4 mm(2)
    • 15.476 mm(2)
    • 15.5 mm(2)
    • 15.601 mm(2)
    • 15.701 mm(2)
    • 15.8 mm(2)
    • 15.875 mm(2)
    • 15.951 mm(2)
    • 16.0 mm(2)
    • 16.026 mm(2)
    • 16.075 mm(2)
    • 16.1 mm(2)
    • 16.2 mm(2)
    • 16.276 mm(2)
    • 16.3 mm(2)
    • 16.401 mm(2)
    • 16.5 mm(2)
    • 16.6 mm(2)
    • 16.675 mm(2)
    • 16.7 mm(2)
    • 16.8 mm(2)
    • 16.875 mm(2)
    • 16.901 mm(2)
    • 18.0 mm(1)
    • 18.1 mm(1)
    • 18.2 mm(1)
    • 18.25 mm(1)
    • 18.3 mm(1)
    • 18.401 mm(1)
    • 18.5 mm(1)
    • 18.6 mm(1)
    • 18.651 mm(1)
    • 18.7 mm(1)
    • 18.8 mm(1)
    • 18.901 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 25.5 mm(1)
    • 27.0 mm(1)
    • 30.0 mm(1)
    • 31.5 mm(1)
    • 36.0 mm(2)
    • 42.0 mm(1)
    • 43.5 mm(2)
    • 45.0 mm(1)
    • 48.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 57.0 mm(1)
    • 58.0 mm(1)
    • 68.0 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.004 in(1)
    • 1.063 in(1)
    • 1.181 in(1)
    • 1.24 in(1)
    • 1.417 in(2)
    • 1.655 in(1)
    • 1.713 in(2)
    • 1.772 in(1)
    • 1.891 in(2)
    • 1.969 in(1)
    • 2.008 in(1)
    • 2.244 in(1)
    • 2.283 in(1)
    • 2.677 in(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 1.606 in(1)
    • 1.693 in(1)
    • 1.862 in(1)
    • 1.945 in(1)
    • 2.193 in(1)
    • 2.606 in(2)
    • 2.618 in(1)
    • 2.685 in(1)
    • 2.85 in(2)
    • 3.012 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.801 mm(1)
    • 43.0 mm(1)
    • 47.301 mm(1)
    • 49.401 mm(1)
    • 55.7 mm(1)
    • 66.2 mm(2)
    • 66.5 mm(1)
    • 68.2 mm(1)
    • 72.4 mm(2)
    • 76.5 mm(1)
    Reach MinkomuReach Max
    Over All Length [L]
    Over All Length [L]
    • 3.15 in(1)
    • 3.228 in(1)
    • 3.583 in(1)
    • 3.622 in(1)
    • 3.701 in(1)
    • 4.114 in(1)
    • 4.213 in(1)
    • 4.449 in(1)
    • 4.646 in(2)
    • 4.744 in(1)
    • 4.764 in(2)
    • 4.843 in(1)
    • 5.118 in(1)
    • 5.218 in(1)
    • 5.551 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(1)
    • 82.0 mm(1)
    • 91.0 mm(1)
    • 92.0 mm(1)
    • 94.0 mm(1)
    • 104.5 mm(1)
    • 107.0 mm(1)
    • 113.0 mm(1)
    • 118.0 mm(2)
    • 120.5 mm(1)
    • 121.0 mm(2)
    • 123.0 mm(1)
    • 130.0 mm(1)
    • 132.5 mm(1)
    • 141.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7315 (17)
    • KC7320 (2)
    • KC7410 (17)
    • KCP15 (17)
    • KCPM45 (17)
    frontEnd
    Point Angle
    Point Angle
    • 140.0 (17)
    • 180.0 (17)
    Point Angle MinkomuPoint Angle Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 8.0 mm(1)
    • 9.0 mm(2)
    • 10.0 mm(1)
    • 11.0 mm(2)
    • 12.0 mm(1)
    • 13.0 mm(1)
    • 14.0 mm(1)
    • 15.0 mm(4)
    • 16.0 mm(2)
    • 17.0 mm(1)
    • 18.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.315 in(1)
    • 0.354 in(2)
    • 0.394 in(1)
    • 0.433 in(2)
    • 0.473 in(1)
    • 0.512 in(1)
    • 0.551 in(1)
    • 0.591 in(4)
    • 0.63 in(2)
    • 0.669 in(1)
    • 0.709 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 4 x D • Metrické
    (5)

    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 4 x D • Metrické

    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 3 x D • Metrické
    (12)

    Systém BF s vrtacími tělesy KenTIP™ BF • Vysoce výkonné kombinované nástroje • 3 x D • Metrické

    Máte na nás otázky?

    Náš kvalifikovaný personál je připraven pomoci.

    Kontaktujte Prodejce
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk