Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

HP Solid-Carbide Deep Hole Drills

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (262)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(112)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(112)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(112)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(112)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(112)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(262)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(262)
    • M Stainless Steel (262)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(262)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(262)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(262)
    • K Cast Iron (112)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(112)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(112)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(112)
    • N Non-Ferrous Materials (148)
      • N1
        Wrought Aluminum (148)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(148)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(148)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (148)
    • S High-Temp Alloys (150)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(150)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(150)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(150)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(150)
    Applications
    Applications
    • Convex DrillingConvex Drilling (88)
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (1)
    • Cross Hole DrillingCross Hole Drilling (428)
    • DrillingDrilling (428)
    • Inclined Exit DrillingInclined Exit Drilling (428)
    • Stacked Plates DrillingStacked Plates Drilling (428)
    Cutting Diameter
    Cutting Diameter
    • 0.094 in(4)
    • 0.095 in(4)
    • 0.096 in(3)
    • 0.098 in(11)
    • 0.101 in(1)
    • 0.103 in(2)
    • 0.109 in(1)
    • 0.11 in(4)
    • 0.113 in(1)
    • 0.114 in(2)
    • 0.119 in(11)
    • 0.125 in(11)
    • 0.126 in(1)
    • 0.129 in(1)
    • 0.13 in(2)
    • 0.134 in(1)
    • 0.138 in(10)
    • 0.143 in(1)
    • 0.146 in(1)
    • 0.15 in(1)
    • 0.156 in(8)
    • 0.157 in(12)
    • 0.161 in(1)
    • 0.165 in(3)
    • 0.169 in(1)
    • 0.177 in(11)
    • 0.179 in(1)
    • 0.181 in(1)
    • 0.185 in(1)
    • 0.188 in(8)
    • 0.189 in(3)
    • 0.197 in(12)
    • 0.201 in(2)
    • 0.206 in(1)
    • 0.209 in(1)
    • 0.213 in(1)
    • 0.217 in(11)
    • 0.219 in(5)
    • 0.221 in(1)
    • 0.224 in(1)
    • 0.228 in(2)
    • 0.237 in(14)
    • 0.24 in(1)
    • 0.244 in(3)
    • 0.25 in(10)
    • 0.252 in(1)
    • 0.256 in(9)
    • 0.257 in(1)
    • 0.26 in(1)
    • 0.266 in(6)
    • 0.268 in(2)
    • 0.272 in(1)
    • 0.276 in(11)
    • 0.281 in(7)
    • 0.295 in(7)
    • 0.297 in(1)
    • 0.303 in(1)
    • 0.307 in(1)
    • 0.313 in(6)
    • 0.315 in(12)
    • 0.319 in(1)
    • 0.323 in(1)
    • 0.328 in(1)
    • 0.332 in(1)
    • 0.335 in(10)
    • 0.336 in(1)
    • 0.339 in(1)
    • 0.343 in(1)
    • 0.345 in(6)
    • 0.347 in(1)
    • 0.354 in(8)
    • 0.358 in(1)
    • 0.359 in(2)
    • 0.374 in(2)
    • 0.375 in(9)
    • 0.384 in(1)
    • 0.386 in(1)
    • 0.391 in(1)
    • 0.394 in(12)
    • 0.402 in(5)
    • 0.406 in(1)
    • 0.408 in(4)
    • 0.414 in(6)
    • 0.422 in(3)
    • 0.425 in(1)
    • 0.433 in(9)
    • 0.438 in(3)
    • 0.441 in(1)
    • 0.453 in(8)
    • 0.465 in(1)
    • 0.473 in(10)
    • 0.477 in(1)
    • 0.48 in(1)
    • 0.484 in(1)
    • 0.492 in(5)
    • 0.5 in(4)
    • 0.512 in(4)
    • 0.516 in(1)
    • 0.531 in(3)
    • 0.543 in(1)
    • 0.551 in(6)
    • 0.555 in(1)
    • 0.564 in(2)
    • 0.572 in(3)
    • 0.576 in(1)
    • 0.591 in(6)
    • 0.598 in(1)
    • 0.61 in(2)
    • 0.625 in(2)
    • 0.63 in(5)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.689 in(1)
    • 0.69 in(1)
    • 0.694 in(1)
    • 0.709 in(1)
    • 0.732 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.787 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.375 mm(4)
    • 2.401 mm(4)
    • 2.45 mm(3)
    • 2.5 mm(11)
    • 2.575 mm(1)
    • 2.6 mm(2)
    • 2.776 mm(1)
    • 2.801 mm(4)
    • 2.875 mm(1)
    • 2.901 mm(2)
    • 3.0 mm(11)
    • 3.176 mm(11)
    • 3.2 mm(1)
    • 3.276 mm(1)
    • 3.301 mm(2)
    • 3.401 mm(1)
    • 3.5 mm(10)
    • 3.6 mm(1)
    • 3.7 mm(1)
    • 3.801 mm(1)
    • 3.975 mm(8)
    • 4.0 mm(12)
    • 4.101 mm(1)
    • 4.2 mm(3)
    • 4.3 mm(1)
    • 4.5 mm(11)
    • 4.55 mm(1)
    • 4.601 mm(1)
    • 4.7 mm(1)
    • 4.775 mm(8)
    • 4.801 mm(3)
    • 5.0 mm(12)
    • 5.101 mm(2)
    • 5.2 mm(1)
    • 5.301 mm(1)
    • 5.4 mm(1)
    • 5.5 mm(11)
    • 5.551 mm(5)
    • 5.601 mm(1)
    • 5.7 mm(1)
    • 5.801 mm(2)
    • 6.0 mm(14)
    • 6.101 mm(1)
    • 6.2 mm(3)
    • 6.351 mm(10)
    • 6.4 mm(1)
    • 6.5 mm(9)
    • 6.525 mm(1)
    • 6.601 mm(1)
    • 6.75 mm(6)
    • 6.801 mm(2)
    • 6.9 mm(1)
    • 7.0 mm(11)
    • 7.15 mm(7)
    • 7.5 mm(7)
    • 7.551 mm(1)
    • 7.7 mm(1)
    • 7.801 mm(1)
    • 7.95 mm(6)
    • 8.0 mm(12)
    • 8.1 mm(1)
    • 8.201 mm(1)
    • 8.326 mm(1)
    • 8.425 mm(1)
    • 8.5 mm(10)
    • 8.525 mm(1)
    • 8.6 mm(1)
    • 8.701 mm(1)
    • 8.725 mm(6)
    • 8.8 mm(1)
    • 9.0 mm(8)
    • 9.1 mm(1)
    • 9.125 mm(2)
    • 9.5 mm(2)
    • 9.525 mm(9)
    • 9.75 mm(1)
    • 9.8 mm(1)
    • 9.925 mm(1)
    • 10.0 mm(12)
    • 10.201 mm(5)
    • 10.3 mm(1)
    • 10.326 mm(4)
    • 10.5 mm(6)
    • 10.726 mm(3)
    • 10.8 mm(1)
    • 11.0 mm(9)
    • 11.125 mm(3)
    • 11.201 mm(1)
    • 11.5 mm(8)
    • 11.8 mm(1)
    • 12.0 mm(10)
    • 12.101 mm(1)
    • 12.201 mm(1)
    • 12.3 mm(1)
    • 12.5 mm(5)
    • 12.701 mm(4)
    • 13.0 mm(4)
    • 13.101 mm(1)
    • 13.5 mm(3)
    • 13.8 mm(1)
    • 14.0 mm(6)
    • 14.101 mm(1)
    • 14.3 mm(2)
    • 14.5 mm(3)
    • 14.601 mm(1)
    • 15.0 mm(6)
    • 15.201 mm(1)
    • 15.5 mm(2)
    • 15.875 mm(2)
    • 16.0 mm(5)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 17.475 mm(1)
    • 17.5 mm(1)
    • 17.6 mm(1)
    • 18.0 mm(1)
    • 18.6 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 35.0 mm(3)
    • 36.0 mm(2)
    • 44.0 mm(14)
    • 45.0 mm(8)
    • 55.0 mm(2)
    • 56.0 mm(10)
    • 57.0 mm(3)
    • 58.0 mm(3)
    • 59.0 mm(3)
    • 60.0 mm(7)
    • 67.0 mm(1)
    • 69.0 mm(3)
    • 70.0 mm(3)
    • 71.0 mm(5)
    • 72.0 mm(3)
    • 73.0 mm(1)
    • 74.0 mm(4)
    • 75.0 mm(8)
    • 77.0 mm(2)
    • 79.0 mm(3)
    • 80.0 mm(4)
    • 81.0 mm(2)
    • 82.0 mm(2)
    • 83.0 mm(6)
    • 84.0 mm(3)
    • 89.0 mm(3)
    • 90.0 mm(7)
    • 94.0 mm(3)
    • 95.0 mm(3)
    • 96.0 mm(3)
    • 97.0 mm(2)
    • 99.0 mm(3)
    • 100.0 mm(4)
    • 103.0 mm(1)
    • 104.0 mm(6)
    • 105.0 mm(2)
    • 106.0 mm(4)
    • 112.0 mm(2)
    • 116.0 mm(2)
    • 117.0 mm(9)
    • 118.0 mm(8)
    • 119.0 mm(8)
    • 120.0 mm(12)
    • 125.0 mm(2)
    • 134.0 mm(5)
    • 135.0 mm(2)
    • 136.0 mm(2)
    • 137.0 mm(3)
    • 138.0 mm(2)
    • 140.0 mm(3)
    • 141.0 mm(5)
    • 142.0 mm(6)
    • 143.0 mm(2)
    • 144.0 mm(3)
    • 146.0 mm(1)
    • 147.0 mm(1)
    • 149.0 mm(3)
    • 150.0 mm(8)
    • 154.0 mm(2)
    • 157.0 mm(2)
    • 159.0 mm(3)
    • 160.0 mm(5)
    • 164.0 mm(5)
    • 165.0 mm(6)
    • 166.0 mm(3)
    • 167.0 mm(2)
    • 168.0 mm(2)
    • 169.0 mm(2)
    • 172.0 mm(2)
    • 173.0 mm(1)
    • 175.0 mm(2)
    • 177.0 mm(1)
    • 178.0 mm(5)
    • 179.0 mm(2)
    • 180.0 mm(8)
    • 187.0 mm(2)
    • 188.0 mm(2)
    • 189.0 mm(2)
    • 190.0 mm(2)
    • 191.0 mm(1)
    • 192.0 mm(2)
    • 194.0 mm(3)
    • 195.0 mm(2)
    • 197.0 mm(2)
    • 198.0 mm(1)
    • 199.0 mm(2)
    • 200.0 mm(6)
    • 202.0 mm(1)
    • 205.0 mm(1)
    • 209.0 mm(1)
    • 210.0 mm(5)
    • 213.0 mm(1)
    • 214.0 mm(2)
    • 215.0 mm(4)
    • 216.0 mm(1)
    • 217.0 mm(2)
    • 219.0 mm(3)
    • 220.0 mm(2)
    • 224.0 mm(2)
    • 225.0 mm(3)
    • 227.0 mm(2)
    • 228.0 mm(1)
    • 232.0 mm(1)
    • 234.0 mm(1)
    • 237.0 mm(3)
    • 238.0 mm(1)
    • 239.0 mm(2)
    • 240.0 mm(9)
    • 245.0 mm(1)
    • 250.0 mm(2)
    • 257.0 mm(2)
    • 258.0 mm(2)
    • 260.0 mm(2)
    • 262.0 mm(2)
    • 263.0 mm(2)
    • 267.0 mm(1)
    • 270.0 mm(1)
    • 274.0 mm(1)
    • 275.0 mm(1)
    • 280.0 mm(3)
    • 285.0 mm(1)
    • 292.0 mm(1)
    • 294.0 mm(1)
    • 297.0 mm(2)
    • 300.0 mm(6)
    • 307.0 mm(1)
    • 317.0 mm(1)
    • 318.0 mm(2)
    • 319.0 mm(1)
    • 320.0 mm(4)
    • 322.0 mm(1)
    • 330.0 mm(2)
    • 344.0 mm(1)
    • 347.0 mm(2)
    • 350.0 mm(1)
    • 352.0 mm(3)
    • 360.0 mm(3)
    • 375.0 mm(1)
    • 387.0 mm(2)
    • 400.0 mm(3)
    • 418.0 mm(3)
    • 422.0 mm(1)
    • 440.0 mm(1)
    • 450.0 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.379 in(3)
    • 1.417 in(2)
    • 1.732 in(14)
    • 1.772 in(8)
    • 2.165 in(2)
    • 2.205 in(10)
    • 2.244 in(3)
    • 2.283 in(3)
    • 2.323 in(3)
    • 2.362 in(7)
    • 2.638 in(1)
    • 2.717 in(3)
    • 2.757 in(3)
    • 2.795 in(5)
    • 2.835 in(3)
    • 2.874 in(1)
    • 2.914 in(4)
    • 2.953 in(8)
    • 3.031 in(2)
    • 3.11 in(3)
    • 3.15 in(4)
    • 3.189 in(2)
    • 3.228 in(2)
    • 3.269 in(6)
    • 3.307 in(3)
    • 3.504 in(3)
    • 3.543 in(7)
    • 3.701 in(3)
    • 3.74 in(3)
    • 3.781 in(3)
    • 3.819 in(2)
    • 3.898 in(3)
    • 3.938 in(4)
    • 4.055 in(1)
    • 4.094 in(6)
    • 4.134 in(2)
    • 4.173 in(4)
    • 4.409 in(2)
    • 4.567 in(2)
    • 4.606 in(9)
    • 4.646 in(8)
    • 4.686 in(8)
    • 4.724 in(12)
    • 4.921 in(2)
    • 5.276 in(5)
    • 5.315 in(2)
    • 5.354 in(2)
    • 5.394 in(3)
    • 5.433 in(2)
    • 5.513 in(3)
    • 5.551 in(5)
    • 5.591 in(6)
    • 5.63 in(2)
    • 5.67 in(3)
    • 5.748 in(1)
    • 5.787 in(1)
    • 5.867 in(3)
    • 5.906 in(8)
    • 6.063 in(2)
    • 6.181 in(2)
    • 6.26 in(3)
    • 6.299 in(5)
    • 6.457 in(5)
    • 6.496 in(6)
    • 6.535 in(3)
    • 6.575 in(2)
    • 6.614 in(2)
    • 6.654 in(2)
    • 6.772 in(2)
    • 6.811 in(1)
    • 6.891 in(2)
    • 6.969 in(1)
    • 7.008 in(5)
    • 7.047 in(2)
    • 7.087 in(8)
    • 7.362 in(2)
    • 7.402 in(2)
    • 7.441 in(2)
    • 7.48 in(2)
    • 7.521 in(1)
    • 7.559 in(2)
    • 7.638 in(3)
    • 7.678 in(2)
    • 7.756 in(2)
    • 7.795 in(1)
    • 7.835 in(2)
    • 7.875 in(6)
    • 7.953 in(1)
    • 8.071 in(1)
    • 8.228 in(1)
    • 8.268 in(5)
    • 8.387 in(1)
    • 8.425 in(2)
    • 8.465 in(4)
    • 8.504 in(1)
    • 8.544 in(2)
    • 8.622 in(3)
    • 8.661 in(2)
    • 8.819 in(2)
    • 8.858 in(3)
    • 8.937 in(2)
    • 8.976 in(1)
    • 9.134 in(1)
    • 9.214 in(1)
    • 9.331 in(3)
    • 9.371 in(1)
    • 9.409 in(2)
    • 9.449 in(9)
    • 9.646 in(1)
    • 9.843 in(2)
    • 10.118 in(2)
    • 10.157 in(2)
    • 10.236 in(2)
    • 10.315 in(2)
    • 10.355 in(2)
    • 10.512 in(1)
    • 10.63 in(1)
    • 10.787 in(1)
    • 10.827 in(1)
    • 11.025 in(3)
    • 11.22 in(1)
    • 11.496 in(1)
    • 11.576 in(1)
    • 11.693 in(2)
    • 11.811 in(6)
    • 12.087 in(1)
    • 12.48 in(1)
    • 12.52 in(2)
    • 12.56 in(1)
    • 12.598 in(4)
    • 12.677 in(1)
    • 12.992 in(2)
    • 13.544 in(1)
    • 13.661 in(2)
    • 13.781 in(1)
    • 13.858 in(3)
    • 14.173 in(3)
    • 14.765 in(1)
    • 15.236 in(2)
    • 15.749 in(3)
    • 16.457 in(3)
    • 16.614 in(1)
    • 17.323 in(1)
    • 17.717 in(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 1.655 in(3)
    • 1.693 in(2)
    • 2.008 in(8)
    • 2.047 in(8)
    • 2.087 in(4)
    • 2.126 in(2)
    • 2.48 in(5)
    • 2.559 in(1)
    • 2.598 in(4)
    • 2.638 in(8)
    • 2.677 in(5)
    • 2.757 in(5)
    • 2.914 in(1)
    • 2.992 in(1)
    • 3.15 in(1)
    • 3.228 in(4)
    • 3.269 in(5)
    • 3.307 in(5)
    • 3.346 in(5)
    • 3.386 in(7)
    • 3.426 in(4)
    • 3.465 in(2)
    • 3.504 in(2)
    • 3.543 in(2)
    • 3.819 in(4)
    • 3.858 in(4)
    • 3.898 in(5)
    • 3.938 in(2)
    • 4.016 in(3)
    • 4.055 in(2)
    • 4.094 in(3)
    • 4.252 in(2)
    • 4.331 in(5)
    • 4.37 in(1)
    • 4.409 in(4)
    • 4.449 in(4)
    • 4.488 in(2)
    • 4.529 in(2)
    • 4.646 in(1)
    • 4.686 in(4)
    • 4.724 in(2)
    • 4.764 in(4)
    • 5.0 in(2)
    • 5.079 in(1)
    • 5.118 in(7)
    • 5.197 in(1)
    • 5.276 in(3)
    • 5.315 in(2)
    • 5.354 in(4)
    • 5.394 in(6)
    • 5.433 in(7)
    • 5.472 in(3)
    • 5.513 in(2)
    • 5.551 in(1)
    • 5.591 in(2)
    • 5.748 in(2)
    • 5.867 in(1)
    • 5.945 in(2)
    • 5.984 in(2)
    • 6.024 in(4)
    • 6.063 in(4)
    • 6.102 in(2)
    • 6.142 in(3)
    • 6.181 in(3)
    • 6.378 in(3)
    • 6.457 in(3)
    • 6.496 in(3)
    • 6.535 in(2)
    • 6.575 in(3)
    • 6.614 in(1)
    • 6.654 in(3)
    • 6.694 in(6)
    • 6.732 in(2)
    • 6.772 in(3)
    • 6.851 in(2)
    • 6.969 in(1)
    • 7.008 in(4)
    • 7.165 in(1)
    • 7.244 in(2)
    • 7.283 in(2)
    • 7.323 in(1)
    • 7.362 in(3)
    • 7.402 in(1)
    • 7.441 in(4)
    • 7.521 in(2)
    • 7.559 in(2)
    • 7.598 in(2)
    • 7.638 in(4)
    • 7.678 in(2)
    • 7.718 in(2)
    • 7.756 in(1)
    • 7.795 in(5)
    • 7.875 in(2)
    • 7.992 in(1)
    • 8.031 in(2)
    • 8.071 in(2)
    • 8.11 in(3)
    • 8.346 in(2)
    • 8.425 in(2)
    • 8.544 in(1)
    • 8.583 in(4)
    • 8.661 in(3)
    • 8.701 in(4)
    • 8.74 in(3)
    • 8.78 in(3)
    • 8.819 in(1)
    • 8.858 in(1)
    • 8.898 in(3)
    • 9.331 in(1)
    • 9.371 in(4)
    • 9.449 in(7)
    • 9.488 in(1)
    • 9.528 in(2)
    • 9.606 in(2)
    • 9.646 in(1)
    • 9.803 in(2)
    • 9.843 in(1)
    • 9.921 in(3)
    • 9.961 in(1)
    • 10.0 in(2)
    • 10.039 in(2)
    • 10.118 in(2)
    • 10.157 in(2)
    • 10.198 in(1)
    • 10.315 in(2)
    • 10.472 in(3)
    • 10.709 in(2)
    • 10.787 in(2)
    • 10.906 in(1)
    • 10.945 in(3)
    • 10.984 in(1)
    • 11.063 in(3)
    • 11.102 in(1)
    • 11.182 in(2)
    • 11.22 in(2)
    • 11.339 in(2)
    • 11.417 in(2)
    • 11.654 in(2)
    • 11.772 in(1)
    • 12.047 in(1)
    • 12.205 in(1)
    • 12.323 in(1)
    • 12.362 in(1)
    • 12.56 in(1)
    • 12.677 in(2)
    • 12.756 in(1)
    • 12.835 in(2)
    • 12.913 in(1)
    • 13.071 in(2)
    • 13.228 in(2)
    • 13.307 in(2)
    • 13.583 in(1)
    • 13.622 in(1)
    • 13.781 in(1)
    • 13.898 in(1)
    • 13.938 in(3)
    • 14.409 in(2)
    • 14.646 in(1)
    • 14.685 in(1)
    • 14.843 in(2)
    • 14.961 in(2)
    • 15.198 in(2)
    • 16.024 in(1)
    • 16.063 in(2)
    • 16.614 in(2)
    • 17.087 in(1)
    • 17.363 in(3)
    • 17.52 in(1)
    • 18.268 in(1)
    • 18.976 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 42.0 mm(3)
    • 43.0 mm(2)
    • 51.0 mm(8)
    • 52.0 mm(8)
    • 53.0 mm(4)
    • 54.0 mm(2)
    • 63.0 mm(5)
    • 65.0 mm(1)
    • 66.0 mm(4)
    • 67.0 mm(8)
    • 68.0 mm(5)
    • 70.0 mm(5)
    • 74.0 mm(1)
    • 76.0 mm(1)
    • 80.0 mm(1)
    • 82.0 mm(4)
    • 83.0 mm(5)
    • 84.0 mm(5)
    • 85.0 mm(5)
    • 86.0 mm(7)
    • 87.0 mm(4)
    • 88.0 mm(2)
    • 89.0 mm(2)
    • 90.0 mm(2)
    • 97.0 mm(4)
    • 98.0 mm(4)
    • 99.0 mm(5)
    • 100.0 mm(2)
    • 102.0 mm(3)
    • 103.0 mm(2)
    • 104.0 mm(3)
    • 108.0 mm(2)
    • 110.0 mm(5)
    • 111.0 mm(1)
    • 112.0 mm(4)
    • 113.0 mm(4)
    • 114.0 mm(2)
    • 115.0 mm(2)
    • 118.0 mm(1)
    • 119.0 mm(4)
    • 120.0 mm(2)
    • 121.0 mm(4)
    • 127.0 mm(2)
    • 129.0 mm(1)
    • 130.0 mm(7)
    • 132.0 mm(1)
    • 134.0 mm(3)
    • 135.0 mm(2)
    • 136.0 mm(4)
    • 137.0 mm(6)
    • 138.0 mm(7)
    • 139.0 mm(3)
    • 140.0 mm(2)
    • 141.0 mm(1)
    • 142.0 mm(2)
    • 146.0 mm(2)
    • 149.0 mm(1)
    • 151.0 mm(2)
    • 152.0 mm(2)
    • 153.0 mm(4)
    • 154.0 mm(4)
    • 155.0 mm(2)
    • 156.0 mm(3)
    • 157.0 mm(3)
    • 162.0 mm(3)
    • 164.0 mm(3)
    • 165.0 mm(3)
    • 166.0 mm(2)
    • 167.0 mm(3)
    • 168.0 mm(1)
    • 169.0 mm(3)
    • 170.0 mm(6)
    • 171.0 mm(2)
    • 172.0 mm(3)
    • 174.0 mm(2)
    • 177.0 mm(1)
    • 178.0 mm(4)
    • 182.0 mm(1)
    • 184.0 mm(2)
    • 185.0 mm(2)
    • 186.0 mm(1)
    • 187.0 mm(3)
    • 188.0 mm(1)
    • 189.0 mm(4)
    • 191.0 mm(2)
    • 192.0 mm(2)
    • 193.0 mm(2)
    • 194.0 mm(4)
    • 195.0 mm(2)
    • 196.0 mm(2)
    • 197.0 mm(1)
    • 198.0 mm(5)
    • 200.0 mm(2)
    • 203.0 mm(1)
    • 204.0 mm(2)
    • 205.0 mm(2)
    • 206.0 mm(3)
    • 212.0 mm(2)
    • 214.0 mm(2)
    • 217.0 mm(1)
    • 218.0 mm(4)
    • 220.0 mm(3)
    • 221.0 mm(4)
    • 222.0 mm(3)
    • 223.0 mm(3)
    • 224.0 mm(1)
    • 225.0 mm(1)
    • 226.0 mm(3)
    • 237.0 mm(1)
    • 238.0 mm(4)
    • 240.0 mm(7)
    • 241.0 mm(1)
    • 242.0 mm(2)
    • 244.0 mm(2)
    • 245.0 mm(1)
    • 249.0 mm(2)
    • 250.0 mm(1)
    • 252.0 mm(3)
    • 253.0 mm(1)
    • 254.0 mm(2)
    • 255.0 mm(2)
    • 257.0 mm(2)
    • 258.0 mm(2)
    • 259.0 mm(1)
    • 262.0 mm(2)
    • 266.0 mm(3)
    • 272.0 mm(2)
    • 274.0 mm(2)
    • 277.0 mm(1)
    • 278.0 mm(3)
    • 279.0 mm(1)
    • 281.0 mm(3)
    • 282.0 mm(1)
    • 284.0 mm(2)
    • 285.0 mm(2)
    • 288.0 mm(2)
    • 290.0 mm(2)
    • 296.0 mm(2)
    • 299.0 mm(1)
    • 306.0 mm(1)
    • 310.0 mm(1)
    • 313.0 mm(1)
    • 314.0 mm(1)
    • 319.0 mm(1)
    • 322.0 mm(2)
    • 324.0 mm(1)
    • 326.0 mm(2)
    • 328.0 mm(1)
    • 332.0 mm(2)
    • 336.0 mm(2)
    • 338.0 mm(2)
    • 345.0 mm(1)
    • 346.0 mm(1)
    • 350.0 mm(1)
    • 353.0 mm(1)
    • 354.0 mm(3)
    • 366.0 mm(2)
    • 372.0 mm(1)
    • 373.0 mm(1)
    • 377.0 mm(2)
    • 380.0 mm(2)
    • 386.0 mm(2)
    • 407.0 mm(1)
    • 408.0 mm(2)
    • 422.0 mm(2)
    • 434.0 mm(1)
    • 441.0 mm(3)
    • 445.0 mm(1)
    • 464.0 mm(1)
    • 482.0 mm(1)
    Reach MinkomuReach Max
    Over All Length [L]
    Over All Length [L]
    • 2.953 in(5)
    • 3.386 in(14)
    • 3.661 in(8)
    • 3.976 in(8)
    • 4.134 in(10)
    • 4.213 in(10)
    • 4.567 in(5)
    • 4.882 in(7)
    • 4.921 in(22)
    • 5.157 in(7)
    • 5.472 in(11)
    • 5.63 in(6)
    • 5.71 in(6)
    • 5.867 in(7)
    • 6.024 in(7)
    • 6.339 in(4)
    • 6.378 in(9)
    • 6.496 in(7)
    • 6.811 in(7)
    • 6.851 in(4)
    • 7.126 in(7)
    • 7.283 in(18)
    • 7.756 in(9)
    • 7.835 in(6)
    • 7.875 in(6)
    • 7.992 in(4)
    • 8.071 in(6)
    • 8.583 in(12)
    • 8.622 in(6)
    • 8.701 in(8)
    • 8.858 in(1)
    • 9.134 in(5)
    • 9.173 in(7)
    • 9.371 in(6)
    • 9.646 in(5)
    • 9.685 in(10)
    • 9.803 in(8)
    • 10.118 in(6)
    • 10.276 in(2)
    • 10.512 in(6)
    • 10.592 in(5)
    • 10.866 in(3)
    • 10.906 in(9)
    • 11.417 in(3)
    • 11.535 in(12)
    • 11.614 in(4)
    • 11.85 in(5)
    • 12.009 in(6)
    • 12.362 in(3)
    • 12.48 in(5)
    • 12.56 in(3)
    • 13.11 in(2)
    • 13.15 in(4)
    • 13.189 in(3)
    • 13.268 in(6)
    • 13.425 in(6)
    • 13.701 in(1)
    • 14.371 in(1)
    • 14.528 in(4)
    • 14.843 in(3)
    • 15.0 in(6)
    • 15.315 in(3)
    • 15.866 in(3)
    • 15.984 in(1)
    • 16.26 in(3)
    • 16.732 in(4)
    • 17.126 in(2)
    • 17.206 in(4)
    • 18.268 in(1)
    • 18.465 in(4)
    • 19.409 in(1)
    • 20.197 in(5)
    • 21.22 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 75.0 mm(5)
    • 86.0 mm(14)
    • 93.0 mm(8)
    • 101.0 mm(8)
    • 105.0 mm(10)
    • 107.0 mm(10)
    • 116.0 mm(5)
    • 124.0 mm(7)
    • 125.0 mm(22)
    • 131.0 mm(7)
    • 139.0 mm(11)
    • 143.0 mm(6)
    • 145.0 mm(6)
    • 149.0 mm(7)
    • 153.0 mm(7)
    • 161.0 mm(4)
    • 162.0 mm(9)
    • 165.0 mm(7)
    • 173.0 mm(7)
    • 174.0 mm(4)
    • 181.0 mm(7)
    • 185.0 mm(18)
    • 197.0 mm(9)
    • 199.0 mm(6)
    • 200.0 mm(6)
    • 203.0 mm(4)
    • 205.0 mm(6)
    • 218.0 mm(12)
    • 219.0 mm(6)
    • 221.0 mm(8)
    • 225.0 mm(1)
    • 232.0 mm(5)
    • 233.0 mm(7)
    • 238.0 mm(6)
    • 245.0 mm(5)
    • 246.0 mm(10)
    • 249.0 mm(8)
    • 257.0 mm(6)
    • 261.0 mm(2)
    • 267.0 mm(6)
    • 269.0 mm(5)
    • 276.0 mm(3)
    • 277.0 mm(9)
    • 290.0 mm(3)
    • 293.0 mm(12)
    • 295.0 mm(4)
    • 301.0 mm(5)
    • 305.0 mm(6)
    • 314.0 mm(3)
    • 317.0 mm(5)
    • 319.0 mm(3)
    • 333.0 mm(2)
    • 334.0 mm(4)
    • 335.0 mm(3)
    • 337.0 mm(6)
    • 341.0 mm(6)
    • 348.0 mm(1)
    • 365.0 mm(1)
    • 369.0 mm(4)
    • 377.0 mm(3)
    • 381.0 mm(6)
    • 389.0 mm(3)
    • 403.0 mm(3)
    • 406.0 mm(1)
    • 413.0 mm(3)
    • 425.0 mm(4)
    • 435.0 mm(2)
    • 437.0 mm(4)
    • 464.0 mm(1)
    • 469.0 mm(4)
    • 493.0 mm(1)
    • 513.0 mm(5)
    • 539.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Coating
    Coating
    • AlCrN (11)
    • AlTiN (2)
    • TiAlN (113)
    • Uncoated (300)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCMS20 (154)
    • KCPK15 (114)
    • KCPK20 (11)
    • KN25 (149)
    frontEnd
    Point Angle
    Point Angle
    • 132.0 (28)
    • 135.0 (400)
    Point Angle MinkomuPoint Angle Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.0 mm(38)
    • 4.0 mm(44)
    • 5.0 mm(32)
    • 6.0 mm(60)
    • 7.0 mm(35)
    • 8.0 mm(46)
    • 9.0 mm(21)
    • 10.0 mm(40)
    • 11.0 mm(22)
    • 12.0 mm(30)
    • 13.0 mm(10)
    • 14.0 mm(17)
    • 15.0 mm(8)
    • 16.0 mm(15)
    • 18.0 mm(6)
    • 20.0 mm(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.119 in(38)
    • 0.157 in(44)
    • 0.197 in(32)
    • 0.237 in(60)
    • 0.276 in(35)
    • 0.315 in(46)
    • 0.354 in(21)
    • 0.394 in(40)
    • 0.433 in(22)
    • 0.473 in(30)
    • 0.512 in(10)
    • 0.551 in(17)
    • 0.591 in(8)
    • 0.63 in(15)
    • 0.709 in(6)
    • 0.787 in(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KenDrill™ HPS • 40 x D • Internal Coolant • Straight Shank • Metric
    (21)

    KenDrill™ HPS • 40 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ SGL • 40 x D • Internal Coolant • Straight Shank • Metric
    (27)

    KenDrill™ SGL • 40 x D • Internal Coolant • Straight Shank • Metric

    B271Z_HP (15 x D) • KN25 • Stopka Z • Vrtáky HP pro hluboké otvory
    (48)

    B271Z_HP (15 x D) • KN25 • Stopka Z • Vrtáky HP pro hluboké otvory

    B271Z_HP (15 x D) • KCMS20 • Stopka Z • Vrtáky HP pro hluboké otvory
    (35)

    B271Z_HP (15 x D) • KCMS20 • Stopka Z • Vrtáky HP pro hluboké otvory

    KenDrill™ HPS • 25 x D • Internal Coolant • Straight Shank • Metric
    (20)

    KenDrill™ HPS • 25 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ SGL • 25 x D • Internal Coolant • Straight Shank • Metric
    (21)

    KenDrill™ SGL • 25 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ HPS • 20 x D • Internal Coolant • Straight Shank • Metric
    (40)

    KenDrill™ HPS • 20 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ SGL • 20 x D • Internal Coolant • Straight Shank • Metric
    (41)

    KenDrill™ SGL • 20 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ HPS • 30 x D • Internal Coolant • Straight Shank • Metric
    (20)

    KenDrill™ HPS • 30 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ HPG • 30 x D • Internal Coolant • Straight Shank • Metric
    (3)

    KenDrill™ HPG • 30 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ SGL • 30 x D • Internal Coolant • Straight Shank • Metric
    (30)

    KenDrill™ SGL • 30 x D • Internal Coolant • Straight Shank • Metric

    B269 (~12 x D) • KCPK15 • Stopka A • Dlouhé provedení vrtáků HP Beyond
    (113)

    B269 (~12 x D) • KCPK15 • Stopka A • Dlouhé provedení vrtáků HP Beyond

    KenDrill™ HPG • 20 x D • Internal Coolant • Straight Shank • Metric
    (2)

    KenDrill™ HPG • 20 x D • Internal Coolant • Straight Shank • Metric

    B271Z_HP (15 x D) • KCPK20 • Stopka Z • Vrtáky HP pro hluboké otvory
    (6)

    B271Z_HP (15 x D) • KCPK20 • Stopka Z • Vrtáky HP pro hluboké otvory

    KenDrill™ HPG • 40 x D • Internal Coolant • Straight Shank • Metric
    (1)

    KenDrill™ HPG • 40 x D • Internal Coolant • Straight Shank • Metric

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk