Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Chamfer Mill

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (35)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(35)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(35)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(35)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(35)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(35)
    • M Stainless Steel (35)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(35)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(34)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(34)
    • K Cast Iron (25)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
    • N Non-Ferrous Materials (4)
      • N1
        Wrought Aluminum (4)
    • S High-Temp Alloys (33)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(28)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(28)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(28)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(33)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (18)
    • Face MillingFace Milling (8)
    Cutting Diameter
    Cutting Diameter
    • 0.394 in(2)
    • 0.46 in(3)
    • 0.473 in(1)
    • 0.63 in(1)
    • 0.701 in(1)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.951 in(1)
    • 1.2 in(1)
    • 1.26 in(4)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 10.0 mm(2)
    • 11.675 mm(3)
    • 12.0 mm(1)
    • 16.0 mm(1)
    • 17.776 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 24.125 mm(1)
    • 30.475 mm(1)
    • 32.0 mm(4)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 20.0 mm(1)
    • 22.0 mm(1)
    • 22.151 mm(1)
    • 22.776 mm(1)
    • 24.0 mm(1)
    • 24.901 mm(1)
    • 27.35 mm(1)
    • 28.0 mm(1)
    • 28.875 mm(1)
    • 32.0 mm(1)
    • 32.15 mm(1)
    • 32.275 mm(1)
    • 35.225 mm(1)
    • 42.151 mm(1)
    • 44.0 mm(1)
    • 49.0 mm(2)
    • 52.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.787 in(1)
    • 0.866 in(1)
    • 0.872 in(1)
    • 0.897 in(1)
    • 0.946 in(1)
    • 0.98 in(1)
    • 1.077 in(1)
    • 1.102 in(1)
    • 1.137 in(1)
    • 1.26 in(1)
    • 1.266 in(1)
    • 1.272 in(1)
    • 1.387 in(1)
    • 1.659 in(1)
    • 1.732 in(1)
    • 1.929 in(2)
    • 2.047 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.45 mm(1)
    • 3.475 mm(1)
    • 4.95 mm(2)
    • 5.0 mm(2)
    • 5.851 mm(2)
    • 6.2 mm(2)
    • 6.5 mm(5)
    • 9.0 mm(2)
    • 10.0 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.136 in(1)
    • 0.137 in(1)
    • 0.195 in(2)
    • 0.197 in(2)
    • 0.23 in(2)
    • 0.244 in(2)
    • 0.256 in(5)
    • 0.354 in(2)
    • 0.394 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.063 in(1)
    • 1.17 in(1)
    • 1.219 in(1)
    • 1.22 in(4)
    • 1.26 in(2)
    • 1.327 in(3)
    • 1.575 in(4)
    Reach MinkomuReach Max
    Reach
    Reach
    • 27.0 mm(1)
    • 29.725 mm(1)
    • 30.975 mm(1)
    • 31.0 mm(4)
    • 32.0 mm(2)
    • 33.7 mm(3)
    • 40.0 mm(4)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 30.0 (2)
    • 45.0 (12)
    • 60.0 (4)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (3)
    • Weldon (15)
    Number of Flutes
    Number of Flutes
    • 1 (7)
    • 2 (7)
    • 3 (4)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (8)
    • 4.0 (56)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.992 in(1)
    • 3.0 in(3)
    • 3.25 in(5)
    • 3.257 in(3)
    • 3.269 in(2)
    • 3.976 in(3)
    • 7.875 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 76.0 mm(1)
    • 76.2 mm(3)
    • 82.551 mm(5)
    • 82.7 mm(3)
    • 83.0 mm(2)
    • 101.0 mm(3)
    • 200.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.004 in(9)
    • 0.016 in(10)
    • 0.031 in(36)
    • 0.039 in(16)
    • 0.063 in(7)
    • 0.125 in(6)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.1 mm(9)
    • 0.4 mm(10)
    • 0.8 mm(36)
    • 1.0 mm(16)
    • 1.6 mm(7)
    • 3.176 mm(6)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (4)
    • K313 (18)
    • K68 (2)
    • K8735 (18)
    • KC510M (2)
    • KC520M (9)
    • KC525M (1)
    • KC710 (14)
    • KC715M (20)
    • KC725M (32)
    • KC730 (21)
    • KC735M (20)
    • KC792M (6)
    • KC850 (13)
    • KC920M (10)
    • KC925M (18)
    • KCK15 (12)
    • KCPK30 (26)
    • KT175 (14)
    Hand Of Tool
    Hand Of Tool
    • R (18)
    Wiper Insert
    Wiper Insert
    • N (38)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.39 in(1)
    • 0.759 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 9.9 mm(1)
    • 19.276 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (38)
    Insert IC Size
    Insert IC Size
    • 8.3 mm(8)
    • 9.525 mm(6)
    • 12.701 mm(24)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.327 in(8)
    • 0.375 in(6)
    • 0.5 in(24)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 8.3 mm(8)
    • 9.525 mm(6)
    • 12.701 mm(24)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.327 in(8)
    • 0.375 in(6)
    • 0.5 in(24)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • T (2)
    Cutting Tool Material
    Cutting Tool Material
    • H W (38)
    Tolerance Class
    Tolerance Class
    • C (8)
    • E (8)
    • H (16)
    • M (6)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (18)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(3)
    • 16.0 mm(4)
    • 19.05 mm(5)
    • 20.0 mm(2)
    • 32.0 mm(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(3)
    • 0.63 in(4)
    • 0.75 in(5)
    • 0.787 in(2)
    • 1.26 in(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Frézy pro srážení hran • Stopkové frézy 45° • SD09 • Metrické
    (4)

    Frézy pro srážení hran • Stopkové frézy 45° • SD09 • Metrické

    Chamfer Mills 30° Lead • Inch
    (2)

    Chamfer Mills 30° Lead • Inch

    Chamfer End Mills • 45°• Cylindrical Shank • Long Version • SD09 • Metric
    (2)

    Chamfer End Mills • 45°• Cylindrical Shank • Long Version • SD09 • Metric

    Chamfer Mills 60° Lead • Inch
    (2)

    Chamfer Mills 60° Lead • Inch

    Chamfer Mills 45° Lead • Inch
    (4)

    Chamfer Mills 45° Lead • Inch

    Chamfer Mill • End Mills 60° • Metric
    (1)

    Chamfer Mill • End Mills 60° • Metric

    Chamfer Mill • End Mills 30° • Metric
    (1)

    Chamfer Mill • End Mills 30° • Metric

    Stopkové frézy pro srážení hran • 45° • Válcová stopka • Dlouhé provedení • SD12 • Metrické
    (1)

    Stopkové frézy pro srážení hran • 45° • Válcová stopka • Dlouhé provedení • SD12 • Metrické

    Frézy pro srážení hran • Stopkové frézy 45° • SD12 • Metrické
    (1)

    Frézy pro srážení hran • Stopkové frézy 45° • SD12 • Metrické

    Inserts for Chamfer Mill • SDEB KIPR
    (8)

    Inserts for Chamfer Mill • SDEB KIPR

    Inserts for Chamfer Mills • SP..12..
    (4)

    Inserts for Chamfer Mills • SP..12..

    Inserts for Chamfer Mills • SDMT09..
    (2)

    Inserts for Chamfer Mills • SDMT09..

    Inserts for Chamfer Mills • SPCW12..-T
    (2)

    Inserts for Chamfer Mills • SPCW12..-T

    Břitové destičky pro frézy pro srážení hran • SDCW09..
    (3)

    Břitové destičky pro frézy pro srážení hran • SDCW09..

    Břitové destičky pro frézy pro srážení hran • SPCW12..
    (2)

    Břitové destičky pro frézy pro srážení hran • SPCW12..

    Inserts for Chamfer Mill • SEHW-T
    (3)

    Inserts for Chamfer Mill • SEHW-T

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?