Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Čelní frézování s 12 skutečnými řeznými hranami na břitovou destičku

  • Čelní frézovací platformy Dodeka Mini, Dodeka a Dodeka MAX™ představují nejucelenější vylepšení čelního frézování na současném trhu.
  • Dvanáct skutečných řezných hran na břitovou destičku zajišťuje nízkou cenu na břit a vysokou produktivitu.
  • S prémiovými frézovacími sortami Beyond™ dosáhnete až o 30 % vyššího úběru kovu (MRR), o 25 % nižších řezných sil díky měkkému řeznému účinku a až o 35 % vyšší životnosti nástroje při lehkém až těžkém obrábění.

Vlastnosti a výhody

  • Dvanáct skutečných řezných hran na břitovou destičku
  • Nízké řezné síly, měkký řezný účinek
  • Zlepšená tvorba a odvádění třísek
  • Nejlepší kombinace geometrie/sorty břitových destiček pro obrábění oceli, nerezové oceli a žáruvzdorných slitin
  • Vynikající kvalita povrchu
  • Vylepšené obráběcí schopnosti
  • Nové vysoce pozitivní geometrie

Nové vysoce pozitivní geometrické břitové destičky Pro Dodeka a Dodeka Mini

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (284)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(261)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(261)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(261)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(261)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(266)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(279)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(279)
    • M Stainless Steel (268)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(268)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(268)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(268)
    • K Cast Iron (260)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(260)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(259)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(259)
    • N Non-Ferrous Materials (166)
      • N1
        Wrought Aluminum (166)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(165)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(165)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (94)
    • S High-Temp Alloys (262)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(242)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(242)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(242)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(262)
    • H Hardened Materials (198)
      • H1
        Hardened Materials 44-48 HRC(198)
    Vybrat první volbu
    • BR (32)
    • CN (102)
    • DE (115)
    • GB (72)
    • IN (42)
    • SG (54)
    • US (114)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (141)
    • Face MillingFace Milling (168)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(7)
    • 1.0 in(7)
    • 1.25 in(7)
    • 1.26 in(8)
    • 1.5 in(5)
    • 1.575 in(10)
    • 1.969 in(9)
    • 2.0 in(9)
    • 2.48 in(10)
    • 2.5 in(9)
    • 3.0 in(11)
    • 3.15 in(11)
    • 3.938 in(10)
    • 4.0 in(9)
    • 4.921 in(10)
    • 5.0 in(10)
    • 6.0 in(5)
    • 6.299 in(5)
    • 7.875 in(3)
    • 8.0 in(2)
    • 9.843 in(3)
    • 10.0 in(3)
    • 12.0 in(2)
    • 12.403 in(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(7)
    • 25.401 mm(7)
    • 31.75 mm(7)
    • 32.0 mm(8)
    • 38.1 mm(5)
    • 40.0 mm(10)
    • 50.0 mm(9)
    • 50.801 mm(9)
    • 63.0 mm(10)
    • 63.5 mm(9)
    • 76.2 mm(11)
    • 80.0 mm(11)
    • 100.0 mm(10)
    • 101.601 mm(9)
    • 125.0 mm(10)
    • 127.0 mm(10)
    • 152.4 mm(5)
    • 160.0 mm(5)
    • 200.0 mm(3)
    • 203.201 mm(2)
    • 250.0 mm(3)
    • 254.0 mm(3)
    • 304.8 mm(2)
    • 315.0 mm(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 33.176 mm(5)
    • 33.575 mm(5)
    • 38.15 mm(2)
    • 38.551 mm(2)
    • 39.926 mm(6)
    • 40.176 mm(6)
    • 44.45 mm(2)
    • 44.901 mm(1)
    • 45.151 mm(2)
    • 46.276 mm(2)
    • 46.35 mm(2)
    • 48.176 mm(2)
    • 51.0 mm(5)
    • 51.25 mm(1)
    • 53.151 mm(1)
    • 56.35 mm(2)
    • 57.151 mm(2)
    • 58.151 mm(3)
    • 58.95 mm(3)
    • 61.0 mm(2)
    • 61.801 mm(2)
    • 63.151 mm(1)
    • 63.95 mm(1)
    • 67.9 mm(1)
    • 69.351 mm(2)
    • 69.75 mm(1)
    • 69.851 mm(1)
    • 71.15 mm(3)
    • 71.65 mm(3)
    • 74.0 mm(3)
    • 74.5 mm(3)
    • 76.15 mm(1)
    • 76.65 mm(1)
    • 80.875 mm(1)
    • 82.45 mm(1)
    • 82.551 mm(2)
    • 84.351 mm(3)
    • 86.325 mm(2)
    • 87.2 mm(3)
    • 88.15 mm(3)
    • 89.325 mm(1)
    • 91.0 mm(3)
    • 93.125 mm(1)
    • 93.525 mm(1)
    • 95.15 mm(1)
    • 97.325 mm(1)
    • 97.875 mm(1)
    • 106.325 mm(2)
    • 107.5 mm(1)
    • 107.926 mm(1)
    • 108.15 mm(3)
    • 109.75 mm(3)
    • 110.976 mm(3)
    • 112.575 mm(2)
    • 117.325 mm(1)
    • 117.851 mm(1)
    • 118.926 mm(1)
    • 120.525 mm(1)
    • 131.326 mm(2)
    • 133.15 mm(3)
    • 133.326 mm(2)
    • 135.15 mm(3)
    • 135.951 mm(2)
    • 135.975 mm(1)
    • 137.951 mm(3)
    • 142.326 mm(1)
    • 142.875 mm(1)
    • 144.326 mm(1)
    • 145.951 mm(1)
    • 163.375 mm(3)
    • 169.726 mm(1)
    • 170.976 mm(3)
    • 171.4 mm(1)
    • 177.326 mm(1)
    • 177.951 mm(1)
    • 211.0 mm(1)
    • 214.175 mm(1)
    • 217.326 mm(2)
    • 220.5 mm(1)
    • 261.0 mm(1)
    • 265.0 mm(1)
    • 267.3 mm(2)
    • 271.3 mm(2)
    • 315.8 mm(1)
    • 322.1 mm(1)
    • 326.0 mm(1)
    • 332.3 mm(2)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.306 in(5)
    • 1.322 in(5)
    • 1.502 in(2)
    • 1.518 in(2)
    • 1.572 in(6)
    • 1.582 in(6)
    • 1.75 in(2)
    • 1.768 in(1)
    • 1.778 in(2)
    • 1.822 in(2)
    • 1.825 in(2)
    • 1.897 in(2)
    • 2.008 in(5)
    • 2.019 in(1)
    • 2.093 in(1)
    • 2.219 in(2)
    • 2.25 in(2)
    • 2.289 in(3)
    • 2.321 in(3)
    • 2.402 in(2)
    • 2.433 in(2)
    • 2.486 in(1)
    • 2.519 in(1)
    • 2.673 in(1)
    • 2.73 in(2)
    • 2.746 in(1)
    • 2.75 in(1)
    • 2.801 in(3)
    • 2.821 in(3)
    • 2.914 in(3)
    • 2.934 in(3)
    • 2.998 in(1)
    • 3.019 in(1)
    • 3.184 in(1)
    • 3.246 in(1)
    • 3.25 in(2)
    • 3.321 in(3)
    • 3.399 in(2)
    • 3.434 in(3)
    • 3.47 in(3)
    • 3.517 in(1)
    • 3.583 in(3)
    • 3.666 in(1)
    • 3.682 in(1)
    • 3.746 in(1)
    • 3.833 in(1)
    • 3.853 in(1)
    • 4.186 in(2)
    • 4.232 in(1)
    • 4.249 in(1)
    • 4.258 in(3)
    • 4.321 in(3)
    • 4.369 in(3)
    • 4.432 in(2)
    • 4.619 in(1)
    • 4.64 in(1)
    • 4.682 in(1)
    • 4.745 in(1)
    • 5.17 in(2)
    • 5.242 in(3)
    • 5.249 in(2)
    • 5.321 in(3)
    • 5.352 in(2)
    • 5.353 in(1)
    • 5.431 in(3)
    • 5.603 in(1)
    • 5.625 in(1)
    • 5.682 in(1)
    • 5.746 in(1)
    • 6.432 in(3)
    • 6.682 in(1)
    • 6.731 in(3)
    • 6.748 in(1)
    • 6.981 in(1)
    • 7.006 in(1)
    • 8.307 in(1)
    • 8.432 in(1)
    • 8.557 in(2)
    • 8.682 in(1)
    • 10.276 in(1)
    • 10.433 in(1)
    • 10.525 in(2)
    • 10.682 in(2)
    • 12.433 in(1)
    • 12.682 in(1)
    • 12.835 in(1)
    • 13.083 in(2)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.625 mm(10)
    • 1.651 mm(5)
    • 2.2 mm(12)
    • 3.2 mm(12)
    • 3.225 mm(44)
    • 4.3 mm(22)
    • 4.476 mm(2)
    • 4.5 mm(43)
    • 8.0 mm(18)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.064 in(10)
    • 0.065 in(5)
    • 0.088 in(12)
    • 0.126 in(12)
    • 0.127 in(44)
    • 0.169 in(22)
    • 0.176 in(2)
    • 0.177 in(43)
    • 0.315 in(18)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.25 in(7)
    • 1.26 in(7)
    • 1.5 in(7)
    • 1.57 in(5)
    • 1.575 in(49)
    • 1.594 in(2)
    • 1.75 in(18)
    • 1.77 in(2)
    • 1.969 in(25)
    • 2.375 in(5)
    • 2.38 in(13)
    • 2.402 in(2)
    • 2.48 in(21)
    • 3.15 in(5)
    Reach MinkomuReach Max
    Reach
    Reach
    • 31.75 mm(7)
    • 32.0 mm(7)
    • 38.1 mm(7)
    • 39.875 mm(5)
    • 40.0 mm(49)
    • 40.5 mm(2)
    • 44.45 mm(18)
    • 44.95 mm(2)
    • 50.0 mm(25)
    • 60.325 mm(5)
    • 60.45 mm(13)
    • 60.975 mm(2)
    • 63.0 mm(21)
    • 80.0 mm(5)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 15.0 (27)
    • 45.0 (119)
    • 58.0 (22)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (100)
    • B-Cutter Retention Screw (11)
    • C-Bolt Circle (16)
    • KL Screw (3)
    • SHCS or RetScrw Or BoltCircle (5)
    • Screw-On Connection (7)
    • Straight-Cylindrical (17)
    • Weldon (9)
    Number of Flutes
    Number of Flutes
    • 10 (7)
    • 11 (2)
    • 12 (14)
    • 14 (5)
    • 16 (6)
    • 18 (2)
    • 2 (4)
    • 20 (2)
    • 24 (2)
    • 3 (19)
    • 4 (28)
    • 5 (26)
    • 6 (22)
    • 7 (2)
    • 8 (18)
    • 9 (9)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 6.0 (112)
    • 12.0 (308)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.57 in(5)
    • 1.575 in(41)
    • 1.594 in(2)
    • 1.75 in(18)
    • 1.77 in(2)
    • 1.969 in(21)
    • 2.224 in(2)
    • 2.375 in(5)
    • 2.38 in(13)
    • 2.402 in(2)
    • 2.465 in(2)
    • 2.48 in(21)
    • 2.539 in(3)
    • 3.15 in(5)
    • 3.228 in(1)
    • 3.281 in(2)
    • 3.781 in(2)
    • 3.819 in(2)
    • 4.213 in(4)
    • 4.724 in(3)
    • 4.799 in(2)
    • 4.8 in(2)
    • 5.118 in(3)
    • 5.2 in(1)
    • 5.202 in(2)
    • 7.875 in(1)
    • 8.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.875 mm(5)
    • 40.0 mm(41)
    • 40.5 mm(2)
    • 44.45 mm(18)
    • 44.95 mm(2)
    • 50.0 mm(21)
    • 56.5 mm(2)
    • 60.325 mm(5)
    • 60.45 mm(13)
    • 60.975 mm(2)
    • 62.6 mm(2)
    • 63.0 mm(21)
    • 64.5 mm(3)
    • 80.0 mm(5)
    • 82.0 mm(1)
    • 83.301 mm(2)
    • 96.0 mm(2)
    • 97.0 mm(2)
    • 107.0 mm(4)
    • 120.0 mm(3)
    • 121.9 mm(2)
    • 121.926 mm(2)
    • 130.0 mm(3)
    • 132.076 mm(1)
    • 132.1 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.039 in(139)
    • 0.047 in(193)
    • 0.063 in(112)
    • 0.079 in(27)
    • 0.126 in(100)
    • 0.138 in(20)
    • 0.171 in(71)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 1.0 mm(139)
    • 1.201 mm(193)
    • 1.6 mm(112)
    • 2.0 mm(27)
    • 3.2 mm(100)
    • 3.5 mm(20)
    • 4.351 mm(71)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (94)
    • KC410M (142)
    • KC510M (95)
    • KC520M (176)
    • KC522M (168)
    • KC725M (185)
    • KCK15 (184)
    • KCK20B (184)
    • KCKP10 (114)
    • KCMP30 (93)
    • KCPK30 (188)
    • KCPM20 (156)
    • KCPM40 (187)
    • KCSM30 (151)
    • KCSM40 (186)
    • KTPK20 (57)
    • KY3500 (58)
    • KYS30 (57)
    Hand Of Tool
    Hand Of Tool
    • R (168)
    Wiper Insert
    Wiper Insert
    • N (123)
    • Y (28)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.76 in(3)
    • 0.946 in(1)
    • 0.958 in(3)
    • 0.965 in(1)
    • 1.006 in(6)
    • 1.059 in(1)
    • 1.256 in(11)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 19.3 mm(3)
    • 24.0 mm(1)
    • 24.3 mm(3)
    • 24.5 mm(1)
    • 25.55 mm(6)
    • 26.901 mm(1)
    • 31.901 mm(11)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (151)
    Insert IC Size
    Insert IC Size
    • 12.0 mm(59)
    • 15.875 mm(72)
    • 22.225 mm(20)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.473 in(59)
    • 0.625 in(72)
    • 0.875 in(20)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 4.101 mm(4)
    • 6.2 mm(7)
    • 6.4 mm(6)
    • 6.426 mm(7)
    • 6.45 mm(36)
    • 7.2 mm(6)
    • 8.5 mm(14)
    • 8.576 mm(18)
    • 8.6 mm(27)
    • 9.175 mm(1)
    • 9.55 mm(1)
    • 9.576 mm(4)
    • 12.101 mm(4)
    • 12.3 mm(2)
    • 12.826 mm(14)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.161 in(4)
    • 0.244 in(7)
    • 0.252 in(6)
    • 0.253 in(7)
    • 0.254 in(36)
    • 0.284 in(6)
    • 0.335 in(14)
    • 0.338 in(18)
    • 0.339 in(27)
    • 0.361 in(1)
    • 0.376 in(1)
    • 0.377 in(4)
    • 0.477 in(4)
    • 0.484 in(2)
    • 0.505 in(14)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (35)
    • GM (4)
    • GP (7)
    • HD (62)
    • LD (30)
    • LM (4)
    • LP (8)
    Cutting Tool Material
    Cutting Tool Material
    • C N (1)
    • H W (145)
    Tolerance Class
    Tolerance Class
    • D (4)
    • E (1)
    • G (72)
    • P (74)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (26)
    • SCREW-ON (7)
    • SHELL MILL (135)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(4)
    • 19.05 mm(25)
    • 20.0 mm(4)
    • 22.0 mm(25)
    • 25.0 mm(10)
    • 25.401 mm(17)
    • 27.0 mm(11)
    • 29.0 mm(7)
    • 31.75 mm(5)
    • 32.0 mm(10)
    • 38.1 mm(14)
    • 40.0 mm(15)
    • 50.801 mm(5)
    • 60.0 mm(9)
    • 63.5 mm(7)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(4)
    • 0.75 in(25)
    • 0.787 in(4)
    • 0.866 in(25)
    • 0.984 in(10)
    • 1.0 in(17)
    • 1.063 in(11)
    • 1.143 in(7)
    • 1.25 in(5)
    • 1.26 in(10)
    • 1.5 in(14)
    • 1.575 in(15)
    • 2.0 in(5)
    • 2.362 in(9)
    • 2.5 in(7)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Dodeka™ Mini
    (154)

    Dodeka™ Mini

    Dodeka™
    (127)

    Dodeka™

    Dodeka™ Max
    (38)

    Dodeka™ Max

    Máte na nás otázky?

    Náš kvalifikovaný personál je připraven pomoci.

    Kontaktujte Prodejce
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk