Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSSM 45

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (50)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(50)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(50)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(50)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(50)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(50)
    • M Stainless Steel (50)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(50)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(50)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(50)
    • K Cast Iron (45)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(45)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(45)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(45)
    • N Non-Ferrous Materials (35)
      • N1
        Wrought Aluminum (35)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(35)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(35)
    • S High-Temp Alloys (48)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(48)
    • H Hardened Materials (36)
      • H1
        Hardened Materials 44-48 HRC(36)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (34)
    • Face MillingFace Milling (34)
    Cutting Diameter
    Cutting Diameter
    • 1.26 in(1)
    • 1.575 in(3)
    • 1.969 in(3)
    • 1.971 in(2)
    • 2.48 in(6)
    • 3.15 in(5)
    • 3.938 in(2)
    • 3.94 in(2)
    • 4.92 in(2)
    • 4.921 in(2)
    • 6.299 in(2)
    • 6.3 in(2)
    • 7.87 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 32.0 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(3)
    • 50.051 mm(2)
    • 63.0 mm(6)
    • 80.0 mm(5)
    • 100.0 mm(2)
    • 100.075 mm(2)
    • 124.976 mm(2)
    • 125.0 mm(2)
    • 160.0 mm(2)
    • 160.025 mm(2)
    • 199.9 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 46.026 mm(1)
    • 53.95 mm(3)
    • 63.875 mm(5)
    • 76.801 mm(6)
    • 93.75 mm(5)
    • 113.7 mm(4)
    • 138.675 mm(4)
    • 173.65 mm(4)
    • 213.601 mm(2)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.812 in(1)
    • 2.124 in(3)
    • 2.515 in(5)
    • 3.024 in(6)
    • 3.692 in(5)
    • 4.476 in(4)
    • 5.46 in(4)
    • 6.837 in(4)
    • 8.409 in(2)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.601 mm(34)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.26 in(34)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.575 in(13)
    • 1.929 in(3)
    • 1.969 in(4)
    • 1.97 in(4)
    • 2.48 in(10)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(13)
    • 49.0 mm(3)
    • 50.0 mm(4)
    • 50.026 mm(4)
    • 63.0 mm(10)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (34)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (19)
    • B-Cutter Retention Screw (4)
    • C-Bolt Circle (2)
    • SHCS or RetScrw Or BoltCircle (2)
    • Straight-Cylindrical (2)
    • Weldon (5)
    Number of Flutes
    Number of Flutes
    • 10 (2)
    • 12 (1)
    • 2 (1)
    • 3 (5)
    • 4 (6)
    • 5 (7)
    • 6 (5)
    • 7 (4)
    • 8 (3)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (35)
    • 4.0 (55)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(9)
    • 1.969 in(4)
    • 1.97 in(4)
    • 2.48 in(10)
    • 3.854 in(1)
    • 3.855 in(3)
    • 4.331 in(1)
    • 5.118 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(9)
    • 50.0 mm(4)
    • 50.026 mm(4)
    • 63.0 mm(10)
    • 97.9 mm(1)
    • 97.926 mm(3)
    • 110.0 mm(1)
    • 130.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.039 in(55)
    • 0.063 in(35)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 1.0 mm(55)
    • 1.6 mm(35)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (35)
    • KC520M (34)
    • KC715M (34)
    • KC725M (40)
    • KCK15 (38)
    • KCPK30 (38)
    • KCPM20 (36)
    • KCPM40 (38)
    • KTPK20 (34)
    • KY3500 (35)
    Hand Of Tool
    Hand Of Tool
    • R (34)
    Wiper Insert
    Wiper Insert
    • N (21)
    • Y (1)
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (22)
    Insert IC Size
    Insert IC Size
    • 14.0 mm(22)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.551 in(22)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 8.275 mm(1)
    • 14.0 mm(21)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.326 in(1)
    • 0.551 in(21)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GB2 (8)
    • GP (4)
    • GP2 (5)
    • LD2 (2)
    • LE (1)
    Cutting Tool Material
    Cutting Tool Material
    • C N (1)
    • H W (21)
    Tolerance Class
    Tolerance Class
    • C (5)
    • K (9)
    • P (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (7)
    • SHELL MILL (27)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.05 mm(2)
    • 22.0 mm(4)
    • 25.401 mm(4)
    • 27.0 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(5)
    • 38.1 mm(4)
    • 40.0 mm(4)
    • 63.5 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.75 in(2)
    • 0.866 in(4)
    • 1.0 in(4)
    • 1.063 in(2)
    • 1.25 in(6)
    • 1.26 in(5)
    • 1.5 in(4)
    • 1.575 in(4)
    • 2.5 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KSSM 45° • Shell Mills • Inch
    (14)

    KSSM 45° • Shell Mills • Inch

    KSSM 45° • Válcová stopka • Metrické
    (2)

    KSSM 45° • Válcová stopka • Metrické

    Břitové destičky pro KSSM 45 • SEPT-GB2
    (8)

    Břitové destičky pro KSSM 45 • SEPT-GB2

    KSSM 45° • Nástrčné frézy • Metrické
    (13)

    KSSM 45° • Nástrčné frézy • Metrické

    Výměnné břitové destičky pro KSSM 45° • SECT-LE
    (1)

    Výměnné břitové destičky pro KSSM 45° • SECT-LE

    Břitové destičky pro KSSM 45 • SEKT-GP2
    (9)

    Břitové destičky pro KSSM 45 • SEKT-GP2

    KSSM 45° • Stopka Weldon® • Metrické
    (1)

    KSSM 45° • Stopka Weldon® • Metrické

    Břitové destičky pro KSSM 45 • SECW-GNW
    (1)

    Břitové destičky pro KSSM 45 • SECW-GNW

    Výměnné břitové destičky pro KSSM 45° • SECT-LD2
    (2)

    Výměnné břitové destičky pro KSSM 45° • SECT-LD2

    KSSM 45° • End Mills • Inch
    (4)

    KSSM 45° • End Mills • Inch

    Břitové destičky pro KSSM 45 • SECW-GN
    (1)

    Břitové destičky pro KSSM 45 • SECW-GN

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk