Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSSM™ 12 • Slotting Cutters • IC 12

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (113)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(106)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(106)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(106)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(106)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(106)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(113)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(113)
    • M Stainless Steel (106)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(106)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(106)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(106)
    • K Cast Iron (99)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(99)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(99)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(99)
    • N Non-Ferrous Materials (60)
      • N1
        Wrought Aluminum (60)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(60)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(60)
    • S High-Temp Alloys (101)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(89)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(89)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(89)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(101)
    • H Hardened Materials (57)
      • H1
        Hardened Materials 44-48 HRC(57)
    Applications
    Applications
    • Face MillingFace Milling (2)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (19)
    • Shoulder MillingShoulder Milling (21)
    • Shoulder Square EndShoulder Square End (21)
    • Slot MillingSlot Milling (32)
    • Slot SideSlot Side (32)
    Cutting Diameter
    Cutting Diameter
    • 4.921 in(10)
    • 5.0 in(2)
    • 6.0 in(5)
    • 6.299 in(10)
    • 7.875 in(7)
    • 8.0 in(4)
    • 9.843 in(6)
    • 10.0 in(2)
    • 12.0 in(2)
    • 12.403 in(5)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 125.0 mm(10)
    • 127.0 mm(2)
    • 152.4 mm(5)
    • 160.0 mm(10)
    • 200.0 mm(7)
    • 203.201 mm(4)
    • 250.0 mm(6)
    • 254.0 mm(2)
    • 304.8 mm(2)
    • 315.0 mm(5)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 11.701 mm(21)
    • 18.0 mm(14)
    • 18.776 mm(2)
    • 18.901 mm(3)
    • 19.826 mm(1)
    • 19.85 mm(2)
    • 20.651 mm(10)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.461 in(21)
    • 0.709 in(14)
    • 0.739 in(2)
    • 0.744 in(3)
    • 0.781 in(3)
    • 0.814 in(10)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.969 in(4)
    • 2.0 in(2)
    • 2.011 in(11)
    • 2.093 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 50.0 mm(4)
    • 50.801 mm(2)
    • 51.051 mm(11)
    • 53.151 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (57)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (14)
    • 2 Key & Socket Head Cap Screw (20)
    • A-Socket Head Cap Screw (9)
    • B-Cutter Retention Screw (5)
    • C-Bolt Circle (5)
    Number of Flutes
    Number of Flutes
    • 10 (3)
    • 11 (2)
    • 12 (4)
    • 14 (5)
    • 16 (2)
    • 18 (1)
    • 4 (6)
    • 5 (5)
    • 7 (6)
    • 8 (10)
    • 9 (9)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (56)
    • 4.0 (139)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.742 in(3)
    • 0.787 in(3)
    • 0.951 in(4)
    • 1.969 in(4)
    • 2.0 in(2)
    • 2.011 in(11)
    • 2.093 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 18.85 mm(3)
    • 20.0 mm(3)
    • 24.125 mm(4)
    • 50.0 mm(4)
    • 50.801 mm(2)
    • 51.051 mm(11)
    • 53.151 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(57)
    • 0.031 in(93)
    • 0.047 in(67)
    • 0.063 in(61)
    • 0.078 in(60)
    • 0.094 in(54)
    • 0.095 in(56)
    • 0.125 in(62)
    • 0.126 in(53)
    • 0.187 in(53)
    • 0.249 in(55)
    • 0.25 in(54)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(57)
    • 0.8 mm(93)
    • 1.201 mm(67)
    • 1.6 mm(61)
    • 1.975 mm(60)
    • 2.375 mm(54)
    • 2.401 mm(56)
    • 3.176 mm(62)
    • 3.2 mm(53)
    • 4.75 mm(53)
    • 6.325 mm(55)
    • 6.351 mm(54)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(142)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(142)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (60)
    • KC510M (53)
    • KC520M (62)
    • KC522M (54)
    • KC525M (41)
    • KC715M (41)
    • KC725M (75)
    • KC735M (53)
    • KC792M (41)
    • KC915M (53)
    • KC920M (53)
    • KC925M (41)
    • KC935M (41)
    • KCK15 (64)
    • KCK20B (62)
    • KCPK30 (65)
    • KCPM20 (57)
    • KCPM40 (59)
    • KCSM30 (53)
    • KCSM40 (60)
    • KTPK20 (42)
    • KUC20M (41)
    • KUC30M (41)
    • KY1335 (41)
    • KY3500 (53)
    • X500 (53)
    Hand Of Tool
    Hand Of Tool
    • L (12)
    • N (32)
    • R (9)
    Wiper Insert
    Wiper Insert
    • N (89)
    frontEnd
    Clamp Style
    Clamp Style
    • S (4)
    Cutting Width
    Cutting Width
    • 0.709 in(14)
    • 0.739 in(4)
    • 0.744 in(1)
    • 0.781 in(3)
    • 0.814 in(10)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 18.0 mm(14)
    • 18.776 mm(4)
    • 18.901 mm(1)
    • 19.826 mm(3)
    • 20.651 mm(10)
    Cutting Width MinkomuCutting Width Max
    Cartridge Size
    Cartridge Size
    • 18N - KSSM Slotting (2)
    • 20W - KSSM Slotting (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.997 in(1)
    • 1.029 in(1)
    • 1.256 in(6)
    • 1.331 in(1)
    • 1.339 in(4)
    • 1.709 in(3)
    • 1.831 in(1)
    • 1.851 in(2)
    • 1.857 in(1)
    • 2.028 in(4)
    • 2.029 in(1)
    • 2.055 in(1)
    • 2.069 in(2)
    • 2.102 in(2)
    • 2.299 in(2)
    • 2.536 in(2)
    • 2.539 in(2)
    • 2.543 in(1)
    • 2.567 in(1)
    • 2.581 in(2)
    • 3.313 in(1)
    • 3.516 in(1)
    • 3.524 in(1)
    • 3.543 in(1)
    • 3.559 in(1)
    • 3.565 in(2)
    • 3.579 in(2)
    • 4.508 in(3)
    • 4.516 in(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 25.326 mm(1)
    • 26.125 mm(1)
    • 31.901 mm(6)
    • 33.801 mm(1)
    • 34.0 mm(4)
    • 43.401 mm(3)
    • 46.5 mm(1)
    • 47.026 mm(2)
    • 47.176 mm(1)
    • 51.5 mm(4)
    • 51.526 mm(1)
    • 52.2 mm(1)
    • 52.551 mm(2)
    • 53.401 mm(2)
    • 58.401 mm(2)
    • 64.425 mm(2)
    • 64.5 mm(2)
    • 64.575 mm(1)
    • 65.2 mm(1)
    • 65.55 mm(2)
    • 84.125 mm(1)
    • 89.301 mm(1)
    • 89.5 mm(1)
    • 89.976 mm(1)
    • 90.4 mm(1)
    • 90.551 mm(2)
    • 90.9 mm(2)
    • 114.5 mm(3)
    • 114.7 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (89)
    Insert IC Size
    Insert IC Size
    • 12.701 mm(89)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(89)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 12.701 mm(89)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.5 in(89)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GB2 (61)
    • LD (8)
    • LD2 (13)
    • LE (7)
    Cutting Tool Material
    Cutting Tool Material
    • H T (1)
    • H W (88)
    Tolerance Class
    Tolerance Class
    • C (28)
    • E (48)
    • P (13)
    backEnd
    Connection Type
    Connection Type
    • ARBOR (34)
    • SHELL MILL (19)
    Back-End Diameter
    Back-End Diameter
    • 31.75 mm(1)
    • 32.0 mm(6)
    • 38.1 mm(7)
    • 40.0 mm(16)
    • 50.0 mm(9)
    • 50.801 mm(6)
    • 60.0 mm(7)
    • 63.5 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.25 in(1)
    • 1.26 in(6)
    • 1.5 in(7)
    • 1.575 in(16)
    • 1.969 in(9)
    • 2.0 in(6)
    • 2.362 in(7)
    • 2.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Inserts KSSM™ 12
    (89)

    Inserts KSSM™ 12

    Cutters KSSM™ 12 • Metric
    (42)

    Cutters KSSM™ 12 • Metric

    Cutters KSSM™ 12 • Inch
    (19)

    Cutters KSSM™ 12 • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?