Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Závitování

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (2631)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2602)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2603)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2561)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2461)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1573)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1752)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1572)
    • M Stainless Steel (2571)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2571)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1754)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2431)
    • K Cast Iron (2262)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1569)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2261)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1568)
    • N Non-Ferrous Materials (930)
      • N1
        Wrought Aluminum (823)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(819)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(115)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (826)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (587)
      • N6
        Carbon, Graphite Composites, CFRP (588)
      • N7
        MMC's (16)
    • S High-Temp Alloys (1855)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1614)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1592)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1592)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1508)
    • H Hardened Materials (624)
      • H1
        Hardened Materials 44-48 HRC(617)
      • H2
        Hardened Materials 48-55 HRC(265)
      • H3
        Hardened Materials 56-60 HRC(122)
      • H4
        Hardened Materials >60 HRC(122)
    Vybrat první volbu
    • BR (23)
    • CN (100)
    • DE (241)
    • GB (116)
    • IN (20)
    • SG (90)
    • US (352)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (4)
    • CountersinkingCountersinking (2)
    • Cut-OffCut-Off (4)
    • Deep GroovingDeep Grooving (4)
    • DrillingDrilling (1)
    • Face GroovingFace Grooving (191)
    • FacingFacing (4)
    • GroovingGrooving (134)
    • ID GroovingID Grooving (69)
    • ID Thread TurningID Thread Turning (897)
    • Multiple Direction CuttingMultiple Direction Cutting (4)
    • OD Thread TurningOD Thread Turning (990)
    • Pipe ThreadPipe Thread (87)
    • Plunge TurningPlunge Turning (4)
    • ProfilingProfiling (4)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (33)
    • Shoulder RoughingShoulder Roughing (33)
    • Shoulder Square EndShoulder Square End (33)
    • Tapping Blind HoleTapping Blind Hole (1019)
    • Tapping Through HoleTapping Through Hole (752)
    • Thread MillingThread Milling (160)
    • ThreadingThreading (2087)
    • TurningTurning (4)
    Cutting Diameter
    Cutting Diameter
    • 0.095 in(1)
    • 0.124 in(1)
    • 0.157 in(1)
    • 0.189 in(1)
    • 0.232 in(1)
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.323 in(1)
    • 0.354 in(4)
    • 0.39 in(1)
    • 0.394 in(4)
    • 0.399 in(1)
    • 0.449 in(1)
    • 0.45 in(2)
    • 0.453 in(3)
    • 0.457 in(1)
    • 0.473 in(2)
    • 0.477 in(1)
    • 0.531 in(1)
    • 0.535 in(1)
    • 0.551 in(3)
    • 0.579 in(1)
    • 0.58 in(1)
    • 0.581 in(1)
    • 0.591 in(2)
    • 0.595 in(1)
    • 0.608 in(2)
    • 0.61 in(3)
    • 0.63 in(4)
    • 0.669 in(5)
    • 0.67 in(2)
    • 0.677 in(1)
    • 0.681 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.787 in(3)
    • 0.79 in(1)
    • 0.799 in(1)
    • 0.802 in(1)
    • 0.807 in(2)
    • 0.811 in(4)
    • 0.835 in(2)
    • 0.866 in(5)
    • 0.87 in(5)
    • 0.906 in(1)
    • 0.909 in(2)
    • 0.917 in(1)
    • 0.965 in(1)
    • 0.969 in(1)
    • 0.984 in(1)
    • 1.02 in(2)
    • 1.024 in(4)
    • 1.039 in(2)
    • 1.18 in(3)
    • 1.181 in(13)
    • 1.22 in(4)
    • 1.358 in(1)
    • 1.379 in(1)
    • 1.417 in(4)
    • 1.421 in(2)
    • 1.437 in(1)
    • 1.441 in(2)
    • 1.457 in(2)
    • 1.46 in(1)
    • 1.478 in(1)
    • 1.539 in(1)
    • 1.651 in(1)
    • 1.655 in(4)
    • 1.69 in(1)
    • 1.732 in(2)
    • 1.811 in(1)
    • 1.891 in(2)
    • 1.929 in(2)
    • 2.047 in(2)
    • 2.09 in(1)
    • 2.091 in(1)
    • 2.205 in(1)
    • 2.283 in(1)
    • 2.319 in(2)
    • 2.48 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.401 mm(1)
    • 3.151 mm(1)
    • 4.0 mm(1)
    • 4.801 mm(1)
    • 5.9 mm(1)
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 8.201 mm(1)
    • 9.0 mm(4)
    • 9.9 mm(1)
    • 10.0 mm(4)
    • 10.125 mm(1)
    • 11.4 mm(1)
    • 11.425 mm(2)
    • 11.5 mm(3)
    • 11.601 mm(1)
    • 12.0 mm(2)
    • 12.101 mm(1)
    • 13.5 mm(1)
    • 13.601 mm(1)
    • 14.0 mm(3)
    • 14.701 mm(1)
    • 14.726 mm(1)
    • 14.75 mm(1)
    • 15.0 mm(2)
    • 15.101 mm(1)
    • 15.451 mm(2)
    • 15.5 mm(3)
    • 16.0 mm(4)
    • 17.0 mm(5)
    • 17.026 mm(2)
    • 17.2 mm(1)
    • 17.3 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(3)
    • 20.076 mm(1)
    • 20.3 mm(1)
    • 20.375 mm(1)
    • 20.5 mm(2)
    • 20.6 mm(4)
    • 21.201 mm(2)
    • 22.0 mm(5)
    • 22.1 mm(5)
    • 23.0 mm(1)
    • 23.1 mm(2)
    • 23.3 mm(1)
    • 24.5 mm(1)
    • 24.6 mm(1)
    • 25.0 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(4)
    • 26.401 mm(2)
    • 29.975 mm(3)
    • 30.0 mm(13)
    • 31.0 mm(4)
    • 34.5 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(4)
    • 36.1 mm(2)
    • 36.5 mm(1)
    • 36.6 mm(2)
    • 37.0 mm(2)
    • 37.075 mm(1)
    • 37.551 mm(1)
    • 39.1 mm(1)
    • 41.901 mm(1)
    • 42.0 mm(4)
    • 42.926 mm(1)
    • 44.0 mm(2)
    • 46.0 mm(1)
    • 48.0 mm(2)
    • 49.0 mm(2)
    • 52.0 mm(2)
    • 53.075 mm(1)
    • 53.1 mm(1)
    • 56.0 mm(1)
    • 58.0 mm(1)
    • 58.901 mm(2)
    • 63.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 13.9 mm(1)
    • 14.0 mm(1)
    • 17.0 mm(1)
    • 17.026 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 27.951 mm(1)
    • 28.0 mm(1)
    • 36.1 mm(1)
    • 39.075 mm(1)
    • 45.0 mm(1)
    • 49.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.547 in(1)
    • 0.551 in(1)
    • 0.669 in(1)
    • 0.67 in(1)
    • 0.866 in(1)
    • 0.87 in(1)
    • 1.1 in(1)
    • 1.102 in(1)
    • 1.421 in(1)
    • 1.538 in(1)
    • 1.772 in(1)
    • 1.929 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 5.0 mm(4)
    • 6.0 mm(7)
    • 6.25 mm(1)
    • 7.0 mm(28)
    • 7.9 mm(21)
    • 8.0 mm(40)
    • 8.1 mm(9)
    • 8.201 mm(1)
    • 8.725 mm(1)
    • 9.0 mm(12)
    • 9.1 mm(20)
    • 9.5 mm(1)
    • 9.701 mm(44)
    • 9.9 mm(8)
    • 10.0 mm(113)
    • 10.101 mm(1)
    • 10.4 mm(4)
    • 10.5 mm(2)
    • 10.775 mm(1)
    • 10.9 mm(1)
    • 10.925 mm(4)
    • 11.0 mm(19)
    • 11.101 mm(43)
    • 11.201 mm(6)
    • 11.5 mm(2)
    • 11.601 mm(11)
    • 11.701 mm(1)
    • 11.8 mm(9)
    • 11.9 mm(3)
    • 12.0 mm(73)
    • 12.101 mm(10)
    • 12.201 mm(5)
    • 12.351 mm(1)
    • 12.4 mm(41)
    • 12.5 mm(3)
    • 12.701 mm(45)
    • 13.0 mm(94)
    • 13.101 mm(2)
    • 13.201 mm(5)
    • 13.4 mm(13)
    • 14.0 mm(20)
    • 14.201 mm(19)
    • 14.8 mm(10)
    • 14.9 mm(3)
    • 15.0 mm(168)
    • 15.101 mm(31)
    • 15.201 mm(8)
    • 15.8 mm(2)
    • 16.0 mm(98)
    • 16.45 mm(1)
    • 16.825 mm(2)
    • 17.0 mm(10)
    • 17.3 mm(2)
    • 17.475 mm(3)
    • 17.5 mm(38)
    • 18.0 mm(84)
    • 18.7 mm(3)
    • 18.901 mm(2)
    • 19.0 mm(13)
    • 19.05 mm(9)
    • 19.1 mm(33)
    • 19.6 mm(34)
    • 20.0 mm(68)
    • 20.201 mm(1)
    • 20.451 mm(1)
    • 21.0 mm(33)
    • 21.1 mm(1)
    • 22.0 mm(19)
    • 22.1 mm(1)
    • 22.3 mm(8)
    • 22.401 mm(14)
    • 23.0 mm(9)
    • 23.1 mm(12)
    • 23.875 mm(1)
    • 23.901 mm(40)
    • 24.0 mm(33)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(34)
    • 25.35 mm(1)
    • 25.401 mm(25)
    • 26.0 mm(1)
    • 26.201 mm(8)
    • 26.925 mm(5)
    • 27.0 mm(7)
    • 27.701 mm(39)
    • 28.0 mm(3)
    • 29.151 mm(1)
    • 30.0 mm(28)
    • 31.0 mm(14)
    • 31.8 mm(2)
    • 32.0 mm(1)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 33.0 mm(1)
    • 34.0 mm(5)
    • 34.926 mm(7)
    • 35.0 mm(15)
    • 36.0 mm(4)
    • 36.7 mm(1)
    • 38.0 mm(1)
    • 38.1 mm(6)
    • 38.5 mm(2)
    • 40.0 mm(13)
    • 41.151 mm(2)
    • 42.0 mm(4)
    • 43.5 mm(4)
    • 44.45 mm(2)
    • 45.0 mm(2)
    • 48.0 mm(2)
    • 50.0 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.197 in(4)
    • 0.237 in(7)
    • 0.246 in(1)
    • 0.276 in(28)
    • 0.311 in(21)
    • 0.315 in(40)
    • 0.319 in(9)
    • 0.323 in(1)
    • 0.345 in(1)
    • 0.354 in(12)
    • 0.358 in(20)
    • 0.374 in(1)
    • 0.382 in(44)
    • 0.39 in(8)
    • 0.394 in(113)
    • 0.398 in(1)
    • 0.41 in(4)
    • 0.414 in(2)
    • 0.424 in(1)
    • 0.429 in(1)
    • 0.43 in(4)
    • 0.433 in(19)
    • 0.437 in(43)
    • 0.441 in(6)
    • 0.453 in(2)
    • 0.457 in(11)
    • 0.461 in(1)
    • 0.465 in(9)
    • 0.47 in(3)
    • 0.473 in(73)
    • 0.477 in(10)
    • 0.48 in(5)
    • 0.486 in(1)
    • 0.488 in(41)
    • 0.492 in(3)
    • 0.5 in(45)
    • 0.512 in(94)
    • 0.516 in(2)
    • 0.52 in(5)
    • 0.528 in(13)
    • 0.551 in(20)
    • 0.559 in(19)
    • 0.583 in(10)
    • 0.587 in(3)
    • 0.591 in(168)
    • 0.595 in(31)
    • 0.598 in(8)
    • 0.622 in(2)
    • 0.63 in(98)
    • 0.648 in(1)
    • 0.662 in(2)
    • 0.669 in(10)
    • 0.681 in(2)
    • 0.689 in(3)
    • 0.69 in(38)
    • 0.709 in(84)
    • 0.736 in(3)
    • 0.744 in(2)
    • 0.748 in(13)
    • 0.75 in(9)
    • 0.752 in(33)
    • 0.772 in(34)
    • 0.787 in(68)
    • 0.795 in(1)
    • 0.805 in(1)
    • 0.828 in(33)
    • 0.832 in(1)
    • 0.866 in(19)
    • 0.87 in(1)
    • 0.878 in(8)
    • 0.882 in(14)
    • 0.906 in(9)
    • 0.909 in(12)
    • 0.941 in(1)
    • 0.942 in(40)
    • 0.946 in(33)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.984 in(34)
    • 0.998 in(1)
    • 1.0 in(25)
    • 1.024 in(1)
    • 1.032 in(8)
    • 1.06 in(5)
    • 1.063 in(7)
    • 1.091 in(39)
    • 1.102 in(3)
    • 1.149 in(1)
    • 1.181 in(28)
    • 1.22 in(14)
    • 1.252 in(2)
    • 1.26 in(1)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.299 in(1)
    • 1.339 in(5)
    • 1.375 in(7)
    • 1.379 in(15)
    • 1.417 in(4)
    • 1.445 in(1)
    • 1.496 in(1)
    • 1.5 in(6)
    • 1.516 in(2)
    • 1.575 in(13)
    • 1.62 in(2)
    • 1.655 in(4)
    • 1.713 in(4)
    • 1.75 in(2)
    • 1.772 in(2)
    • 1.891 in(2)
    • 1.969 in(1)
    Cutting Length MinkomuCutting Length Max
    Type of Thread
    Type of Thread
    • 55 (136)
    • 60 (458)
    • ACME (316)
    • API (163)
    • API BUTTRESS (38)
    • API RD (162)
    • BSPT (113)
    • BSW (330)
    • BUTTRESS (208)
    • G (14)
    • M (1311)
    • MF (10)
    • NPS (15)
    • NPT (247)
    • NPTF (139)
    • RD DIN 405 (116)
    • STUB ACME (226)
    • TR DIN 103 (120)
    • UN (664)
    • UNC (529)
    • UNF (324)
    • UNJ (288)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (191)
    • Lightly Interrupted Cut (191)
    • Smooth Cut (192)
    • Varying Depth of Cut (192)
    Thread Size
    Thread Size
    • 1 - 11 (2)
    • 1 - 11 1/2 (2)
    • 1 - 12 (2)
    • 1 - 8 (9)
    • 1 1/2 - 6 (2)
    • 1 1/4 - 7 (3)
    • 1 1/8 - 12 (2)
    • 1 1/8 - 7 (4)
    • 1 3/4 - 5 (1)
    • 1 3/8 - 6 (1)
    • 1/16 - 27 (3)
    • 1/2 - 13 (50)
    • 1/2 - 14 (6)
    • 1/2 - 20 (34)
    • 1/4 - 18 (4)
    • 1/4 - 19 (2)
    • 1/4 - 20 (62)
    • 1/4 - 28 (55)
    • 1/8 - 27 (8)
    • 1/8 - 28 (3)
    • 10 - 24 (40)
    • 10 - 32 (57)
    • 12 - 24 (2)
    • 12 - 28 (2)
    • 2 - 56 (13)
    • 3 - 48 (2)
    • 3/4 - 10 (17)
    • 3/4 - 14 (5)
    • 3/4 - 16 (12)
    • 3/8 - 16 (58)
    • 3/8 - 18 (4)
    • 3/8 - 19 (2)
    • 3/8 - 24 (43)
    • 4 - 40 (41)
    • 4 - 48 (4)
    • 5 - 40 (5)
    • 5/16 - 18 (56)
    • 5/16 - 24 (44)
    • 5/16- 24 (4)
    • 5/8 - 11 (30)
    • 5/8 - 18 (16)
    • 6 - 32 (46)
    • 6 - 40 (10)
    • 7/16 - 14 (26)
    • 7/16 - 20 (34)
    • 7/8 - 14 (4)
    • 7/8 - 9 (5)
    • 8 - 32 (55)
    • 8 - 36 (4)
    • 9/16 - 12 (8)
    • 9/16 - 18 (9)
    • M10 X 0,75 (2)
    • M10 X 1 (19)
    • M10 X 1,25 (20)
    • M10 X 1,5 (71)
    • M10 X 1,50 (2)
    • M10 X 1.0 (1)
    • M10 X 1.5 (1)
    • M10X1.5 (1)
    • M12 X 1 (3)
    • M12 X 1,25 (16)
    • M12 X 1,5 (24)
    • M12 X 1,75 (63)
    • M12 X 1.0 (1)
    • M12 X 1.5 (1)
    • M12 X 1.75 (1)
    • M14 X 1 (3)
    • M14 X 1,25 (6)
    • M14 X 1,5 (26)
    • M14 X 1.5 (1)
    • M14 X 2 (34)
    • M14 X 2,0 (1)
    • M14 X 2.0 (1)
    • M14X1.5 (1)
    • M16 X 1 (1)
    • M16 X 1,5 (23)
    • M16 X 1.5 (1)
    • M16 X 2 (37)
    • M16 X 2,0 (3)
    • M16 X 2.0 (1)
    • M18 X 1,5 (12)
    • M18 X 1.5 (1)
    • M18 X 2 (3)
    • M18 X 2,5 (13)
    • M2 X 0,4 (7)
    • M2,5 X 0,45 (8)
    • M20 X 1,5 (3)
    • M20 X 1.5 (1)
    • M20 X 2 (3)
    • M20 X 2,5 (15)
    • M20 X 2.5 (1)
    • M22 X 1,5 (3)
    • M22 X 2 (2)
    • M22 X 2,5 (5)
    • M24 X 1,5 (3)
    • M24 X 2 (2)
    • M24 X 3 (13)
    • M27 X 1,5 (1)
    • M27 X 3 (3)
    • M3 X 0,5 (41)
    • M3 X 0.5 (1)
    • M3,5 X 0,6 (5)
    • M30 X 1,5 (2)
    • M30 X 2 (1)
    • M30 X 3,5 (12)
    • M33 X 3,5 (3)
    • M36 X 4 (9)
    • M39 X 4 (1)
    • M4 X 0,5 (1)
    • M4 X 0,7 (45)
    • M4 X 0.7 (1)
    • M42 X 4,5 (4)
    • M5 X 0,5 (1)
    • M5 X 0,8 (59)
    • M5 X 0.8 (1)
    • M6 X 0,5 (1)
    • M6 X 0,75 (3)
    • M6 X 1 (75)
    • M7 X 1 (11)
    • M8 X 0,75 (1)
    • M8 X 0.75 (1)
    • M8 X 1 (17)
    • M8 X 1,0 (1)
    • M8 X 1,25 (76)
    • M8 X 1.0 (1)
    • M8 X 1.25 (1)
    • M9 X 1,25 (1)
    Reach
    Reach
    • 0.472 in(1)
    • 0.473 in(3)
    • 0.61 in(2)
    • 0.648 in(1)
    • 0.662 in(1)
    • 0.669 in(2)
    • 0.787 in(1)
    • 0.79 in(1)
    • 0.797 in(1)
    • 0.805 in(1)
    • 0.807 in(1)
    • 0.866 in(2)
    • 0.87 in(2)
    • 0.906 in(1)
    • 0.909 in(1)
    • 0.931 in(1)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.984 in(1)
    • 0.998 in(1)
    • 1.0 in(1)
    • 1.02 in(2)
    • 1.024 in(4)
    • 1.098 in(1)
    • 1.102 in(3)
    • 1.149 in(1)
    • 1.181 in(2)
    • 1.191 in(1)
    • 1.26 in(2)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.319 in(2)
    • 1.341 in(1)
    • 1.379 in(1)
    • 1.417 in(2)
    • 1.421 in(1)
    • 1.445 in(1)
    • 1.449 in(1)
    • 1.457 in(1)
    • 1.496 in(1)
    • 1.5 in(1)
    • 1.567 in(1)
    • 1.575 in(4)
    • 1.579 in(3)
    • 1.62 in(2)
    • 1.68 in(1)
    • 1.689 in(2)
    • 1.69 in(1)
    • 1.693 in(10)
    • 1.701 in(3)
    • 1.732 in(1)
    • 1.752 in(1)
    • 1.77 in(1)
    • 1.772 in(3)
    • 1.78 in(1)
    • 1.788 in(1)
    • 1.891 in(2)
    • 1.969 in(5)
    • 2.0 in(3)
    • 2.031 in(2)
    • 2.047 in(1)
    • 2.15 in(1)
    • 2.165 in(4)
    • 2.201 in(2)
    • 2.283 in(1)
    • 2.559 in(7)
    • 2.561 in(1)
    • 2.567 in(1)
    • 2.575 in(2)
    • 2.693 in(1)
    • 2.961 in(1)
    • 2.969 in(1)
    • 3.15 in(4)
    • 3.209 in(1)
    • 3.358 in(2)
    • 3.362 in(2)
    • 3.531 in(1)
    • 3.598 in(1)
    • 3.622 in(1)
    • 3.858 in(1)
    • 3.938 in(1)
    • 3.95 in(1)
    • 3.954 in(1)
    • 4.0 in(1)
    • 4.055 in(1)
    • 4.059 in(1)
    • 4.346 in(1)
    • 4.358 in(1)
    • 4.728 in(1)
    • 4.74 in(1)
    • 5.039 in(2)
    • 5.428 in(1)
    • 5.984 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 11.951 mm(1)
    • 12.0 mm(3)
    • 15.5 mm(2)
    • 16.45 mm(1)
    • 16.825 mm(1)
    • 17.0 mm(2)
    • 20.0 mm(1)
    • 20.076 mm(1)
    • 20.25 mm(1)
    • 20.451 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(2)
    • 22.1 mm(2)
    • 23.0 mm(1)
    • 23.1 mm(1)
    • 23.651 mm(1)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(1)
    • 25.35 mm(1)
    • 25.401 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(4)
    • 27.901 mm(1)
    • 28.0 mm(3)
    • 29.151 mm(1)
    • 30.0 mm(2)
    • 30.25 mm(1)
    • 32.0 mm(2)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 33.5 mm(2)
    • 34.051 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(2)
    • 36.1 mm(1)
    • 36.7 mm(1)
    • 36.801 mm(1)
    • 37.0 mm(1)
    • 38.0 mm(1)
    • 38.1 mm(1)
    • 39.801 mm(1)
    • 40.0 mm(4)
    • 40.1 mm(3)
    • 41.151 mm(2)
    • 42.676 mm(1)
    • 42.901 mm(2)
    • 42.926 mm(1)
    • 43.0 mm(10)
    • 43.2 mm(3)
    • 44.0 mm(1)
    • 44.5 mm(1)
    • 44.95 mm(1)
    • 45.0 mm(3)
    • 45.2 mm(1)
    • 45.401 mm(1)
    • 48.0 mm(2)
    • 50.0 mm(5)
    • 50.801 mm(3)
    • 51.551 mm(2)
    • 52.0 mm(1)
    • 54.6 mm(1)
    • 55.0 mm(4)
    • 55.901 mm(2)
    • 58.0 mm(1)
    • 65.0 mm(7)
    • 65.05 mm(1)
    • 65.2 mm(1)
    • 65.4 mm(2)
    • 68.4 mm(1)
    • 75.2 mm(1)
    • 75.4 mm(1)
    • 80.0 mm(4)
    • 81.5 mm(1)
    • 85.301 mm(2)
    • 85.4 mm(2)
    • 89.65 mm(1)
    • 91.4 mm(1)
    • 92.0 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 100.301 mm(1)
    • 100.4 mm(1)
    • 101.601 mm(1)
    • 103.0 mm(1)
    • 103.101 mm(1)
    • 110.4 mm(1)
    • 110.7 mm(1)
    • 120.101 mm(1)
    • 120.4 mm(1)
    • 128.0 mm(2)
    • 137.875 mm(1)
    • 152.0 mm(1)
    Reach MinkomuReach Max
    Thread Tolerance Class ANSI
    Thread Tolerance Class ANSI
    • 2B (96)
    • 2BX (44)
    • 3B (34)
    • 3BX (140)
    Thread Tolerance Class ISO
    Thread Tolerance Class ISO
    • 6G-I (22)
    • 6H-I (271)
    • 6HX-I (362)
    Tap PD Class
    Tap PD Class
    • 0 (36)
    • 3B (9)
    • 6G (8)
    • 6H (32)
    • D10 (3)
    • D11 (5)
    • D12 (5)
    • D3 (17)
    • D4 (28)
    • D5 (46)
    • D6 (37)
    • D7 (11)
    • D8 (4)
    • D9 (8)
    • H10 (2)
    • H2 (59)
    • H3 (269)
    • H4 (42)
    • H5 (106)
    • H6 (32)
    • H7 (47)
    Tap Tolerance Class
    Tap Tolerance Class
    • ISO 2 (217)
    • ISO 3 (23)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 88.217 (10)
    • 90.0 (455)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (23)
    • Bolt-On Head (7)
    • Boring Bar Shank (115)
    • Cylindrical with Drive Square (1647)
    • KM (17)
    • Straight-Cylindrical (115)
    • Toolholder (147)
    • Weldon (102)
    Number of Flutes
    Number of Flutes
    • 0 (3)
    • 1 (46)
    • 2 (263)
    • 3 (1019)
    • 4 (417)
    • 5 (71)
    • 6 (66)
    • 7 (3)
    • 8 (2)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (294)
    • 2.0 (946)
    • 3.0 (552)
    • 4.0 (5)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.181 in(17)
    • 1.26 in(2)
    • 1.319 in(2)
    • 1.379 in(1)
    • 1.496 in(1)
    • 1.567 in(1)
    • 1.575 in(3)
    • 1.579 in(3)
    • 1.625 in(7)
    • 1.655 in(1)
    • 1.75 in(1)
    • 1.752 in(8)
    • 1.756 in(2)
    • 1.772 in(10)
    • 1.811 in(1)
    • 1.815 in(6)
    • 1.819 in(1)
    • 1.874 in(7)
    • 1.879 in(23)
    • 1.883 in(8)
    • 1.891 in(2)
    • 1.937 in(4)
    • 1.941 in(14)
    • 1.945 in(1)
    • 1.969 in(8)
    • 1.988 in(15)
    • 1.992 in(9)
    • 1.996 in(4)
    • 2.0 in(16)
    • 2.028 in(2)
    • 2.047 in(1)
    • 2.114 in(1)
    • 2.118 in(33)
    • 2.122 in(9)
    • 2.125 in(11)
    • 2.126 in(11)
    • 2.13 in(5)
    • 2.165 in(4)
    • 2.192 in(1)
    • 2.205 in(44)
    • 2.209 in(1)
    • 2.213 in(1)
    • 2.224 in(2)
    • 2.362 in(23)
    • 2.366 in(6)
    • 2.37 in(21)
    • 2.374 in(17)
    • 2.378 in(19)
    • 2.382 in(6)
    • 2.418 in(3)
    • 2.43 in(2)
    • 2.437 in(4)
    • 2.48 in(45)
    • 2.488 in(2)
    • 2.492 in(2)
    • 2.496 in(29)
    • 2.5 in(50)
    • 2.508 in(2)
    • 2.512 in(10)
    • 2.563 in(4)
    • 2.705 in(10)
    • 2.709 in(2)
    • 2.713 in(5)
    • 2.717 in(36)
    • 2.721 in(22)
    • 2.724 in(7)
    • 2.728 in(10)
    • 2.75 in(1)
    • 2.757 in(77)
    • 2.761 in(1)
    • 2.765 in(3)
    • 2.769 in(1)
    • 2.773 in(1)
    • 2.783 in(2)
    • 2.918 in(2)
    • 2.926 in(18)
    • 2.934 in(19)
    • 2.938 in(26)
    • 2.942 in(12)
    • 2.949 in(7)
    • 2.953 in(2)
    • 3.031 in(1)
    • 3.11 in(1)
    • 3.12 in(1)
    • 3.125 in(4)
    • 3.142 in(1)
    • 3.15 in(105)
    • 3.157 in(1)
    • 3.161 in(36)
    • 3.185 in(2)
    • 3.189 in(1)
    • 3.228 in(2)
    • 3.25 in(5)
    • 3.269 in(1)
    • 3.273 in(1)
    • 3.301 in(1)
    • 3.307 in(1)
    • 3.311 in(1)
    • 3.346 in(7)
    • 3.378 in(6)
    • 3.38 in(1)
    • 3.382 in(64)
    • 3.39 in(1)
    • 3.42 in(1)
    • 3.5 in(6)
    • 3.504 in(1)
    • 3.539 in(1)
    • 3.543 in(141)
    • 3.56 in(2)
    • 3.563 in(1)
    • 3.579 in(1)
    • 3.583 in(3)
    • 3.591 in(18)
    • 3.622 in(1)
    • 3.74 in(3)
    • 3.75 in(3)
    • 3.761 in(1)
    • 3.811 in(48)
    • 3.858 in(2)
    • 3.902 in(1)
    • 3.926 in(1)
    • 3.938 in(213)
    • 3.94 in(2)
    • 3.942 in(7)
    • 3.98 in(2)
    • 4.0 in(5)
    • 4.016 in(3)
    • 4.021 in(1)
    • 4.031 in(2)
    • 4.055 in(2)
    • 4.059 in(1)
    • 4.091 in(2)
    • 4.094 in(1)
    • 4.13 in(3)
    • 4.134 in(1)
    • 4.15 in(1)
    • 4.173 in(1)
    • 4.194 in(1)
    • 4.252 in(22)
    • 4.331 in(164)
    • 4.38 in(2)
    • 4.488 in(1)
    • 4.5 in(14)
    • 4.529 in(3)
    • 4.532 in(1)
    • 4.551 in(1)
    • 4.602 in(1)
    • 4.606 in(1)
    • 4.65 in(1)
    • 4.689 in(4)
    • 4.72 in(1)
    • 4.724 in(3)
    • 4.843 in(1)
    • 4.87 in(1)
    • 4.882 in(1)
    • 4.921 in(44)
    • 4.98 in(1)
    • 5.0 in(27)
    • 5.039 in(1)
    • 5.059 in(1)
    • 5.13 in(8)
    • 5.197 in(1)
    • 5.299 in(1)
    • 5.315 in(2)
    • 5.351 in(2)
    • 5.382 in(1)
    • 5.441 in(3)
    • 5.513 in(40)
    • 5.591 in(1)
    • 5.598 in(1)
    • 5.748 in(1)
    • 5.787 in(1)
    • 5.791 in(1)
    • 5.88 in(1)
    • 5.906 in(38)
    • 5.984 in(2)
    • 5.996 in(1)
    • 6.0 in(73)
    • 6.024 in(1)
    • 6.063 in(2)
    • 6.102 in(3)
    • 6.299 in(19)
    • 6.33 in(1)
    • 6.37 in(1)
    • 6.449 in(1)
    • 6.457 in(1)
    • 6.535 in(2)
    • 6.694 in(16)
    • 6.891 in(4)
    • 7.0 in(11)
    • 7.008 in(2)
    • 7.079 in(2)
    • 7.087 in(27)
    • 7.202 in(1)
    • 7.323 in(1)
    • 7.702 in(1)
    • 7.718 in(1)
    • 7.819 in(1)
    • 7.875 in(28)
    • 7.913 in(1)
    • 7.931 in(1)
    • 7.976 in(1)
    • 8.0 in(7)
    • 8.058 in(2)
    • 8.082 in(1)
    • 8.35 in(1)
    • 8.661 in(1)
    • 8.74 in(1)
    • 9.843 in(11)
    • 9.879 in(1)
    • 10.0 in(18)
    • 11.811 in(7)
    • 12.0 in(8)
    • 13.781 in(1)
    • 14.0 in(7)
    • 16.0 in(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 30.0 mm(17)
    • 32.0 mm(2)
    • 33.5 mm(2)
    • 35.0 mm(1)
    • 38.0 mm(1)
    • 39.801 mm(1)
    • 40.0 mm(3)
    • 40.1 mm(3)
    • 41.276 mm(7)
    • 42.0 mm(1)
    • 44.45 mm(1)
    • 44.5 mm(8)
    • 44.6 mm(2)
    • 45.0 mm(10)
    • 46.0 mm(1)
    • 46.1 mm(6)
    • 46.2 mm(1)
    • 47.6 mm(7)
    • 47.7 mm(23)
    • 47.801 mm(8)
    • 48.0 mm(2)
    • 49.2 mm(4)
    • 49.301 mm(14)
    • 49.401 mm(1)
    • 50.0 mm(8)
    • 50.5 mm(15)
    • 50.6 mm(9)
    • 50.7 mm(4)
    • 50.801 mm(16)
    • 51.5 mm(2)
    • 52.0 mm(1)
    • 53.7 mm(1)
    • 53.801 mm(33)
    • 53.901 mm(9)
    • 53.975 mm(11)
    • 54.0 mm(11)
    • 54.1 mm(5)
    • 55.0 mm(4)
    • 55.676 mm(1)
    • 56.0 mm(44)
    • 56.1 mm(1)
    • 56.2 mm(1)
    • 56.5 mm(2)
    • 60.0 mm(23)
    • 60.1 mm(6)
    • 60.2 mm(21)
    • 60.301 mm(17)
    • 60.401 mm(19)
    • 60.5 mm(6)
    • 61.401 mm(3)
    • 61.7 mm(2)
    • 61.901 mm(4)
    • 63.0 mm(45)
    • 63.2 mm(2)
    • 63.301 mm(2)
    • 63.401 mm(29)
    • 63.5 mm(50)
    • 63.7 mm(2)
    • 63.801 mm(10)
    • 65.101 mm(4)
    • 68.7 mm(10)
    • 68.8 mm(2)
    • 68.9 mm(5)
    • 69.0 mm(36)
    • 69.101 mm(22)
    • 69.2 mm(7)
    • 69.3 mm(10)
    • 69.851 mm(1)
    • 70.0 mm(77)
    • 70.101 mm(1)
    • 70.2 mm(3)
    • 70.3 mm(1)
    • 70.4 mm(1)
    • 70.7 mm(2)
    • 74.101 mm(2)
    • 74.3 mm(18)
    • 74.5 mm(19)
    • 74.601 mm(26)
    • 74.7 mm(12)
    • 74.9 mm(7)
    • 75.0 mm(2)
    • 77.0 mm(1)
    • 79.0 mm(1)
    • 79.25 mm(1)
    • 79.375 mm(4)
    • 79.801 mm(1)
    • 80.0 mm(105)
    • 80.2 mm(1)
    • 80.301 mm(36)
    • 80.9 mm(2)
    • 81.0 mm(1)
    • 82.0 mm(2)
    • 82.551 mm(5)
    • 83.0 mm(1)
    • 83.101 mm(1)
    • 83.825 mm(1)
    • 84.0 mm(1)
    • 84.101 mm(1)
    • 85.0 mm(7)
    • 85.801 mm(6)
    • 85.851 mm(1)
    • 85.9 mm(64)
    • 86.101 mm(1)
    • 86.875 mm(1)
    • 88.9 mm(6)
    • 89.0 mm(1)
    • 89.9 mm(1)
    • 90.0 mm(141)
    • 90.426 mm(2)
    • 90.5 mm(1)
    • 90.9 mm(1)
    • 91.0 mm(3)
    • 91.2 mm(18)
    • 92.0 mm(1)
    • 95.0 mm(3)
    • 95.25 mm(3)
    • 95.5 mm(1)
    • 96.801 mm(48)
    • 98.0 mm(2)
    • 99.101 mm(1)
    • 99.7 mm(1)
    • 100.0 mm(213)
    • 100.075 mm(2)
    • 100.101 mm(7)
    • 101.101 mm(2)
    • 101.601 mm(5)
    • 102.0 mm(3)
    • 102.101 mm(1)
    • 102.4 mm(2)
    • 103.0 mm(2)
    • 103.101 mm(1)
    • 103.9 mm(2)
    • 104.0 mm(1)
    • 104.9 mm(3)
    • 105.0 mm(1)
    • 105.4 mm(1)
    • 106.0 mm(1)
    • 106.5 mm(1)
    • 108.0 mm(22)
    • 110.0 mm(164)
    • 111.25 mm(2)
    • 114.0 mm(1)
    • 114.301 mm(14)
    • 115.0 mm(3)
    • 115.101 mm(1)
    • 115.601 mm(1)
    • 116.9 mm(1)
    • 117.0 mm(1)
    • 118.101 mm(1)
    • 119.101 mm(4)
    • 119.9 mm(1)
    • 120.0 mm(3)
    • 123.0 mm(1)
    • 123.7 mm(1)
    • 124.0 mm(1)
    • 125.0 mm(44)
    • 126.5 mm(1)
    • 127.0 mm(27)
    • 128.0 mm(1)
    • 128.5 mm(1)
    • 130.3 mm(8)
    • 132.0 mm(1)
    • 134.6 mm(1)
    • 135.0 mm(2)
    • 135.9 mm(2)
    • 136.701 mm(1)
    • 138.201 mm(3)
    • 140.0 mm(40)
    • 142.0 mm(1)
    • 142.201 mm(1)
    • 146.0 mm(1)
    • 147.0 mm(1)
    • 147.1 mm(1)
    • 149.35 mm(1)
    • 150.0 mm(38)
    • 152.0 mm(2)
    • 152.3 mm(1)
    • 152.4 mm(73)
    • 153.0 mm(1)
    • 154.0 mm(2)
    • 155.0 mm(3)
    • 160.0 mm(19)
    • 160.775 mm(1)
    • 161.8 mm(1)
    • 163.8 mm(1)
    • 164.0 mm(1)
    • 166.0 mm(2)
    • 170.0 mm(16)
    • 175.0 mm(4)
    • 177.8 mm(11)
    • 178.0 mm(2)
    • 179.8 mm(2)
    • 180.0 mm(27)
    • 182.9 mm(1)
    • 186.0 mm(1)
    • 195.601 mm(1)
    • 196.0 mm(1)
    • 198.601 mm(1)
    • 200.0 mm(28)
    • 201.0 mm(1)
    • 201.425 mm(1)
    • 202.601 mm(1)
    • 203.201 mm(7)
    • 204.675 mm(2)
    • 205.275 mm(1)
    • 212.101 mm(1)
    • 220.0 mm(1)
    • 222.0 mm(1)
    • 250.0 mm(11)
    • 250.925 mm(1)
    • 254.0 mm(18)
    • 300.0 mm(7)
    • 304.8 mm(8)
    • 350.0 mm(1)
    • 355.6 mm(7)
    • 406.401 mm(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(21)
    • 0.001 in(25)
    • 0.002 in(212)
    • 0.003 in(382)
    • 0.004 in(271)
    • 0.005 in(116)
    • 0.006 in(224)
    • 0.007 in(276)
    • 0.008 in(281)
    • 0.01 in(265)
    • 0.011 in(139)
    • 0.012 in(83)
    • 0.014 in(177)
    • 0.015 in(30)
    • 0.016 in(82)
    • 0.017 in(37)
    • 0.019 in(108)
    • 0.02 in(149)
    • 0.021 in(25)
    • 0.023 in(109)
    • 0.027 in(3)
    • 0.028 in(17)
    • 0.03 in(107)
    • 0.031 in(139)
    • 0.033 in(11)
    • 0.035 in(106)
    • 0.037 in(9)
    • 0.038 in(1)
    • 0.039 in(155)
    • 0.047 in(139)
    • 0.049 in(139)
    • 0.06 in(140)
    • 0.062 in(63)
    • 0.063 in(178)
    • 0.069 in(139)
    • 0.078 in(63)
    • 0.079 in(102)
    • 0.089 in(102)
    • 0.095 in(102)
    • 0.098 in(39)
    • 0.125 in(39)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(21)
    • 0.025 mm(25)
    • 0.05 mm(212)
    • 0.076 mm(382)
    • 0.1 mm(271)
    • 0.125 mm(116)
    • 0.151 mm(224)
    • 0.176 mm(276)
    • 0.2 mm(281)
    • 0.225 mm(114)
    • 0.25 mm(216)
    • 0.275 mm(139)
    • 0.301 mm(83)
    • 0.325 mm(156)
    • 0.351 mm(123)
    • 0.375 mm(30)
    • 0.4 mm(82)
    • 0.426 mm(37)
    • 0.45 mm(107)
    • 0.476 mm(33)
    • 0.5 mm(149)
    • 0.525 mm(25)
    • 0.576 mm(109)
    • 0.65 mm(3)
    • 0.701 mm(17)
    • 0.75 mm(107)
    • 0.775 mm(139)
    • 0.826 mm(11)
    • 0.9 mm(106)
    • 0.925 mm(9)
    • 0.976 mm(1)
    • 1.0 mm(155)
    • 1.201 mm(139)
    • 1.25 mm(139)
    • 1.5 mm(139)
    • 1.526 mm(1)
    • 1.576 mm(63)
    • 1.6 mm(178)
    • 1.75 mm(139)
    • 1.975 mm(63)
    • 2.0 mm(102)
    • 2.25 mm(102)
    • 2.401 mm(102)
    • 2.5 mm(39)
    • 3.176 mm(39)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(1301)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(1301)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Coating
    Coating
    • AlCrTiN (52)
    • CrC/C (15)
    • Oxide (37)
    • TiAlN (30)
    • TiN (182)
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00331 (46)
    • K1 (8)
    • K2885 (139)
    • K313 (185)
    • K420 (202)
    • K4H (100)
    • K68 (277)
    • KB1345 (102)
    • KB1630 (102)
    • KB5625 (63)
    • KBH20 (32)
    • KC250 (147)
    • KC5010 (455)
    • KC5025 (758)
    • KC5410 (179)
    • KC610M (233)
    • KC620M (37)
    • KC635M (254)
    • KC710 (245)
    • KC720 (300)
    • KC722 (231)
    • KC730 (388)
    • KC732 (63)
    • KC7512 (6)
    • KC7542 (29)
    • KC810 (197)
    • KC850 (234)
    • KC910 (100)
    • KC9105 (1)
    • KC9110 (178)
    • KC9120 (63)
    • KC9320 (178)
    • KC935 (178)
    • KC950 (178)
    • KCK17 (53)
    • KCK20 (139)
    • KCK20B (178)
    • KCN14 (15)
    • KCP10B (178)
    • KCP25B (178)
    • KCU10 (268)
    • KCU10B (203)
    • KCU25 (270)
    • KCU25B (178)
    • KCU32 (2)
    • KCU33 (19)
    • KCU36 (7)
    • KD050 (32)
    • KD081 (63)
    • KD100 (84)
    • KD120 (102)
    • KD1425 (63)
    • KM6515 (121)
    • KP6525 (260)
    • KSH26 (15)
    • KSMN34 (85)
    • KSN28 (17)
    • KSN38 (15)
    • KSP21 (39)
    • KSP27 (133)
    • KSP32 (82)
    • KSP39 (550)
    • KSS20 (54)
    • KSS29 (108)
    • KSSM24 (25)
    • KSU30 (1)
    • KSU31 (117)
    • KT175 (139)
    • KT315 (178)
    • KU10T (178)
    • KU25T (231)
    • KU30T (178)
    • KY3000 (102)
    • PN120 (2)
    • SP4066 (10)
    • THM (8)
    • TN10P (8)
    • TN6010 (11)
    • TN6025 (17)
    • TN7110 (11)
    • TTS (2)
    • WU10HT (2)
    • WU10PT (5)
    • WU25PT (2)
    Hand Of Tool
    Hand Of Tool
    • L (116)
    • R (2062)
    Wiper Insert
    Wiper Insert
    • N (1435)
    Tap Standard
    Tap Standard
    • ANSI (767)
    • DIN 2174 (41)
    • DIN 371 (272)
    • DIN 374 (162)
    • DIN 376 (224)
    • DIN-ANSI (137)
    • JIS (6)
    Tap Type
    Tap Type
    • 10 (13)
    • 11 (302)
    • 13 (143)
    • 3 (132)
    • 8 (1142)
    F Dimension
    F Dimension
    • 6.551 mm(3)
    • 6.726 mm(1)
    • 7.0 mm(2)
    • 7.101 mm(4)
    • 7.301 mm(4)
    • 8.25 mm(1)
    • 8.9 mm(5)
    • 9.525 mm(2)
    • 10.0 mm(1)
    • 10.3 mm(2)
    • 10.775 mm(1)
    • 10.976 mm(4)
    • 11.0 mm(4)
    • 11.101 mm(2)
    • 11.3 mm(2)
    • 11.5 mm(2)
    • 11.675 mm(4)
    • 11.701 mm(1)
    • 12.0 mm(1)
    • 12.576 mm(3)
    • 12.701 mm(8)
    • 12.951 mm(4)
    • 13.0 mm(2)
    • 13.4 mm(3)
    • 14.0 mm(2)
    • 14.15 mm(3)
    • 14.275 mm(4)
    • 15.601 mm(2)
    • 15.8 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(21)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.5 mm(3)
    • 17.0 mm(4)
    • 17.2 mm(2)
    • 17.35 mm(2)
    • 17.401 mm(1)
    • 17.475 mm(4)
    • 18.026 mm(3)
    • 19.05 mm(6)
    • 19.55 mm(1)
    • 20.0 mm(6)
    • 21.5 mm(2)
    • 21.6 mm(1)
    • 22.0 mm(8)
    • 22.225 mm(4)
    • 24.0 mm(2)
    • 25.0 mm(15)
    • 25.401 mm(20)
    • 25.8 mm(2)
    • 27.0 mm(4)
    • 28.576 mm(2)
    • 31.75 mm(27)
    • 32.0 mm(22)
    • 34.926 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(16)
    • 38.875 mm(1)
    • 40.0 mm(7)
    • 41.276 mm(4)
    • 50.801 mm(4)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(3)
    • 0.265 in(1)
    • 0.276 in(2)
    • 0.28 in(4)
    • 0.288 in(4)
    • 0.325 in(1)
    • 0.351 in(5)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.406 in(2)
    • 0.424 in(1)
    • 0.432 in(4)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.445 in(2)
    • 0.453 in(2)
    • 0.46 in(4)
    • 0.461 in(1)
    • 0.473 in(1)
    • 0.495 in(3)
    • 0.5 in(8)
    • 0.51 in(4)
    • 0.512 in(2)
    • 0.528 in(3)
    • 0.551 in(2)
    • 0.557 in(3)
    • 0.562 in(4)
    • 0.614 in(2)
    • 0.622 in(1)
    • 0.625 in(5)
    • 0.63 in(21)
    • 0.634 in(2)
    • 0.642 in(2)
    • 0.65 in(3)
    • 0.669 in(4)
    • 0.677 in(2)
    • 0.683 in(2)
    • 0.685 in(1)
    • 0.689 in(4)
    • 0.71 in(3)
    • 0.75 in(6)
    • 0.77 in(1)
    • 0.787 in(6)
    • 0.846 in(2)
    • 0.85 in(1)
    • 0.866 in(8)
    • 0.875 in(4)
    • 0.946 in(2)
    • 0.984 in(15)
    • 1.0 in(20)
    • 1.016 in(2)
    • 1.063 in(4)
    • 1.125 in(2)
    • 1.25 in(27)
    • 1.26 in(22)
    • 1.375 in(4)
    • 1.379 in(1)
    • 1.5 in(16)
    • 1.532 in(1)
    • 1.575 in(7)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(87)
    • 11.175 mm(3)
    • 11.5 mm(2)
    • 12.201 mm(1)
    • 12.701 mm(4)
    • 13.0 mm(4)
    • 15.25 mm(1)
    • 16.0 mm(2)
    • 16.5 mm(3)
    • 17.0 mm(1)
    • 18.5 mm(2)
    • 18.55 mm(6)
    • 20.0 mm(5)
    • 20.326 mm(5)
    • 22.0 mm(3)
    • 22.85 mm(4)
    • 24.0 mm(3)
    • 25.401 mm(5)
    • 26.0 mm(2)
    • 27.0 mm(2)
    • 28.576 mm(5)
    • 29.0 mm(5)
    • 30.475 mm(3)
    • 31.75 mm(3)
    • 32.0 mm(3)
    • 34.0 mm(4)
    • 34.926 mm(6)
    • 36.825 mm(1)
    • 38.1 mm(5)
    • 39.0 mm(2)
    • 41.301 mm(31)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.0 mm(2)
    • 47.6 mm(31)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 54.0 mm(4)
    • 55.875 mm(3)
    • 56.625 mm(33)
    • 57.151 mm(1)
    • 57.2 mm(18)
    • 60.325 mm(2)
    • 63.5 mm(22)
    • 69.851 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(8)
    • 76.95 mm(1)
    • 82.551 mm(4)
    • 88.9 mm(66)
    • 127.0 mm(1)
    • 139.701 mm(31)
    • 146.05 mm(3)
    • 174.601 mm(31)
    • 209.601 mm(20)
    • 222.3 mm(18)
    • 333.0 mm(3)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(87)
    • 0.44 in(3)
    • 0.453 in(2)
    • 0.48 in(1)
    • 0.5 in(4)
    • 0.512 in(4)
    • 0.6 in(1)
    • 0.63 in(2)
    • 0.65 in(3)
    • 0.669 in(1)
    • 0.728 in(2)
    • 0.73 in(6)
    • 0.787 in(5)
    • 0.8 in(5)
    • 0.866 in(3)
    • 0.9 in(4)
    • 0.946 in(3)
    • 1.0 in(5)
    • 1.024 in(2)
    • 1.063 in(2)
    • 1.125 in(5)
    • 1.143 in(5)
    • 1.2 in(3)
    • 1.25 in(3)
    • 1.26 in(3)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.45 in(1)
    • 1.5 in(5)
    • 1.536 in(2)
    • 1.627 in(31)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.85 in(2)
    • 1.874 in(31)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(33)
    • 2.25 in(1)
    • 2.253 in(18)
    • 2.375 in(2)
    • 2.5 in(22)
    • 2.75 in(4)
    • 2.757 in(1)
    • 3.0 in(8)
    • 3.031 in(1)
    • 3.25 in(4)
    • 3.5 in(66)
    • 5.0 in(1)
    • 5.5 in(31)
    • 5.75 in(3)
    • 6.875 in(31)
    • 8.252 in(20)
    • 8.752 in(18)
    • 13.11 in(3)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(192)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(192)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 7.0 (12)
    • 10.0 (3)
    • 14.5 (145)
    • 15.0 (12)
    • 27.0 (8)
    • 27.5 (76)
    • 30.0 (716)
    • 33.0 (8)
    • 45.0 (18)
    Countersunk Angle MinkomuCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (156)
    • S (130)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (105)
    • NEGATIVE-ZERO (23)
    • NEUTRAL (ZERO) (158)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.984 in(2)
    • 1.0 in(12)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.25 in(2)
    • 1.26 in(3)
    • 1.291 in(1)
    • 1.415 in(1)
    • 1.5 in(3)
    • 1.555 in(1)
    • 1.57 in(1)
    • 1.575 in(3)
    • 1.87 in(1)
    • 1.891 in(2)
    • 2.0 in(26)
    • 2.25 in(2)
    • 2.362 in(2)
    • 2.499 in(1)
    • 2.5 in(8)
    • 2.52 in(4)
    • 3.0 in(6)
    • 3.125 in(1)
    • 3.15 in(6)
    • 3.75 in(5)
    • 3.781 in(2)
    • 3.938 in(8)
    • 4.0 in(4)
    • 4.5 in(4)
    • 4.724 in(1)
    • 5.0 in(4)
    • 5.039 in(5)
    • 5.906 in(1)
    • 6.0 in(6)
    • 6.299 in(6)
    • 7.0 in(3)
    • 7.875 in(1)
    • 8.0 in(6)
    • 9.0 in(1)
    • 10.0 in(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(2)
    • 25.401 mm(12)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 32.801 mm(1)
    • 35.95 mm(1)
    • 38.1 mm(3)
    • 39.5 mm(1)
    • 39.875 mm(1)
    • 40.0 mm(3)
    • 47.5 mm(1)
    • 48.0 mm(2)
    • 50.801 mm(26)
    • 57.151 mm(2)
    • 60.0 mm(2)
    • 63.475 mm(1)
    • 63.5 mm(8)
    • 64.0 mm(4)
    • 76.2 mm(6)
    • 79.375 mm(1)
    • 80.0 mm(6)
    • 95.25 mm(5)
    • 96.0 mm(2)
    • 100.0 mm(8)
    • 101.601 mm(4)
    • 114.301 mm(4)
    • 120.0 mm(1)
    • 127.0 mm(4)
    • 128.0 mm(5)
    • 150.0 mm(1)
    • 152.4 mm(6)
    • 160.0 mm(6)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.201 mm(6)
    • 228.601 mm(1)
    • 254.0 mm(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (21)
    • H (6)
    • S (95)
    frontEnd
    Clamp Style
    Clamp Style
    • C (60)
    • M (24)
    • N (198)
    • S (21)
    • Y (21)
    Cutting Width
    Cutting Width
    • 0.02 in(76)
    • 0.031 in(84)
    • 0.035 in(76)
    • 0.039 in(139)
    • 0.041 in(76)
    • 0.047 in(147)
    • 0.055 in(76)
    • 0.058 in(76)
    • 0.06 in(139)
    • 0.062 in(147)
    • 0.067 in(76)
    • 0.069 in(139)
    • 0.073 in(63)
    • 0.077 in(76)
    • 0.078 in(63)
    • 0.079 in(139)
    • 0.088 in(139)
    • 0.089 in(107)
    • 0.094 in(32)
    • 0.095 in(147)
    • 0.097 in(63)
    • 0.098 in(139)
    • 0.105 in(63)
    • 0.108 in(139)
    • 0.11 in(63)
    • 0.119 in(178)
    • 0.122 in(63)
    • 0.125 in(178)
    • 0.126 in(178)
    • 0.128 in(139)
    • 0.129 in(76)
    • 0.131 in(32)
    • 0.138 in(178)
    • 0.143 in(63)
    • 0.147 in(39)
    • 0.15 in(37)
    • 0.151 in(39)
    • 0.152 in(76)
    • 0.156 in(63)
    • 0.157 in(102)
    • 0.167 in(102)
    • 0.169 in(63)
    • 0.177 in(102)
    • 0.178 in(63)
    • 0.185 in(81)
    • 0.188 in(102)
    • 0.189 in(102)
    • 0.192 in(32)
    • 0.193 in(32)
    • 0.195 in(63)
    • 0.196 in(63)
    • 0.197 in(42)
    • 0.202 in(39)
    • 0.213 in(39)
    • 0.217 in(39)
    • 0.218 in(8)
    • 0.219 in(39)
    • 0.237 in(42)
    • 0.25 in(50)
    • 0.256 in(39)
    • 0.276 in(3)
    • 0.281 in(11)
    • 0.312 in(11)
    • 0.315 in(2)
    • 0.33 in(1)
    • 0.34 in(1)
    • 0.345 in(3)
    • 0.351 in(3)
    • 0.354 in(3)
    • 0.36 in(1)
    • 0.37 in(1)
    • 0.375 in(11)
    • 0.38 in(3)
    • 0.381 in(3)
    • 0.384 in(8)
    • 0.39 in(5)
    • 0.4 in(1)
    • 0.411 in(1)
    • 0.52 in(3)
    • 0.55 in(5)
    • 0.56 in(3)
    • 0.571 in(7)
    • 0.58 in(4)
    • 0.59 in(4)
    • 0.709 in(1)
    • 0.866 in(2)
    • 0.889 in(2)
    • 0.9 in(4)
    • 0.909 in(3)
    • 0.91 in(1)
    • 0.916 in(4)
    • 0.928 in(7)
    • 0.929 in(4)
    • 0.937 in(4)
    • 0.941 in(1)
    • 0.946 in(21)
    • 0.948 in(4)
    • 0.951 in(4)
    • 0.958 in(2)
    • 0.96 in(2)
    • 0.965 in(7)
    • 0.969 in(2)
    • 0.974 in(2)
    • 0.984 in(4)
    • 0.988 in(2)
    • 1.401 in(2)
    • 1.417 in(2)
    • 1.476 in(1)
    • 1.478 in(2)
    • 1.496 in(2)
    • 1.5 in(18)
    • 1.516 in(4)
    • 1.536 in(8)
    • 1.545 in(4)
    • 1.55 in(2)
    • 1.555 in(4)
    • 1.563 in(3)
    • 1.571 in(4)
    • 1.575 in(4)
    • 1.594 in(2)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(76)
    • 0.775 mm(84)
    • 0.8 mm(76)
    • 0.9 mm(76)
    • 1.0 mm(139)
    • 1.05 mm(76)
    • 1.201 mm(147)
    • 1.401 mm(76)
    • 1.475 mm(76)
    • 1.5 mm(139)
    • 1.576 mm(147)
    • 1.701 mm(76)
    • 1.75 mm(139)
    • 1.826 mm(63)
    • 1.951 mm(76)
    • 1.975 mm(63)
    • 2.0 mm(139)
    • 2.2 mm(139)
    • 2.225 mm(139)
    • 2.25 mm(107)
    • 2.375 mm(32)
    • 2.401 mm(147)
    • 2.475 mm(63)
    • 2.5 mm(139)
    • 2.676 mm(63)
    • 2.75 mm(139)
    • 2.801 mm(63)
    • 3.0 mm(178)
    • 3.1 mm(63)
    • 3.176 mm(178)
    • 3.2 mm(178)
    • 3.25 mm(139)
    • 3.276 mm(76)
    • 3.325 mm(32)
    • 3.5 mm(178)
    • 3.6 mm(63)
    • 3.725 mm(39)
    • 3.801 mm(37)
    • 3.825 mm(39)
    • 3.85 mm(76)
    • 3.95 mm(63)
    • 3.975 mm(32)
    • 4.0 mm(102)
    • 4.25 mm(102)
    • 4.3 mm(63)
    • 4.5 mm(102)
    • 4.525 mm(63)
    • 4.7 mm(81)
    • 4.775 mm(102)
    • 4.801 mm(102)
    • 4.875 mm(32)
    • 4.9 mm(32)
    • 4.95 mm(63)
    • 4.976 mm(63)
    • 5.0 mm(42)
    • 5.125 mm(39)
    • 5.4 mm(39)
    • 5.5 mm(39)
    • 5.525 mm(8)
    • 5.575 mm(39)
    • 6.0 mm(42)
    • 6.351 mm(50)
    • 6.5 mm(39)
    • 7.0 mm(3)
    • 7.125 mm(11)
    • 7.926 mm(11)
    • 8.0 mm(2)
    • 8.375 mm(1)
    • 8.625 mm(1)
    • 8.75 mm(3)
    • 8.9 mm(3)
    • 9.0 mm(3)
    • 9.15 mm(1)
    • 9.4 mm(1)
    • 9.525 mm(11)
    • 9.65 mm(3)
    • 9.675 mm(3)
    • 9.75 mm(8)
    • 9.9 mm(5)
    • 10.15 mm(1)
    • 10.425 mm(1)
    • 13.201 mm(3)
    • 13.976 mm(5)
    • 14.226 mm(3)
    • 14.476 mm(7)
    • 14.726 mm(4)
    • 14.976 mm(4)
    • 18.0 mm(1)
    • 22.0 mm(2)
    • 22.576 mm(2)
    • 22.85 mm(4)
    • 23.1 mm(3)
    • 23.125 mm(1)
    • 23.276 mm(4)
    • 23.576 mm(7)
    • 23.6 mm(4)
    • 23.8 mm(4)
    • 23.875 mm(1)
    • 24.0 mm(21)
    • 24.05 mm(4)
    • 24.125 mm(4)
    • 24.3 mm(2)
    • 24.35 mm(2)
    • 24.5 mm(7)
    • 24.6 mm(2)
    • 24.75 mm(2)
    • 25.0 mm(4)
    • 25.1 mm(2)
    • 35.551 mm(2)
    • 36.0 mm(2)
    • 37.5 mm(1)
    • 37.551 mm(2)
    • 38.0 mm(2)
    • 38.1 mm(18)
    • 38.5 mm(4)
    • 39.0 mm(8)
    • 39.25 mm(4)
    • 39.375 mm(2)
    • 39.5 mm(4)
    • 39.7 mm(3)
    • 39.901 mm(4)
    • 40.0 mm(4)
    • 40.5 mm(2)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (552)
    • TM-RECTANGLE THREAD MILL 90 (210)
    • TM-TRIANGLE THREAD MILL 60 (84)
    • TN-TOP NOTCH (757)
    Insert Size
    Insert Size
    • 1 (8)
    • 2 (49)
    • 3 (36)
    • 4 (19)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(11)
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(40)
    • 0.21 in(39)
    • 0.24 in(2)
    • 0.25 in(2)
    • 0.293 in(8)
    • 0.294 in(15)
    • 0.3 in(1)
    • 0.334 in(4)
    • 0.416 in(3)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(11)
    • 1.026 mm(1)
    • 1.6 mm(2)
    • 1.701 mm(1)
    • 1.776 mm(2)
    • 1.901 mm(1)
    • 3.301 mm(1)
    • 3.5 mm(40)
    • 5.325 mm(39)
    • 6.101 mm(2)
    • 6.351 mm(2)
    • 7.45 mm(8)
    • 7.476 mm(15)
    • 7.625 mm(1)
    • 8.475 mm(4)
    • 10.55 mm(3)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Thread TPI
    Thread TPI
    • 2.0 (7)
    • 2.5 (2)
    • 3.0 (4)
    • 4.0 (56)
    • 4.5 (19)
    • 5.0 (48)
    • 6.0 (82)
    • 7.0 (44)
    • 8.0 (152)
    • 9.0 (55)
    • 10.0 (146)
    • 11.0 (160)
    • 11.5 (44)
    • 12.0 (144)
    • 13.0 (52)
    • 14.0 (197)
    • 16.0 (261)
    • 18.0 (200)
    • 19.0 (48)
    • 20.0 (241)
    • 24.0 (194)
    • 27.0 (27)
    • 28.0 (95)
    • 32.0 (200)
    • 36.0 (5)
    • 40.0 (58)
    • 48.0 (59)
    • 56.0 (13)
    Thread TPI MinkomuThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.351 mm(1)
    • 0.4 mm(8)
    • 0.45 mm(7)
    • 0.5 mm(71)
    • 0.601 mm(5)
    • 0.701 mm(46)
    • 0.75 mm(42)
    • 0.8 mm(59)
    • 1.0 mm(221)
    • 1.25 mm(162)
    • 1.5 mm(318)
    • 1.75 mm(95)
    • 2.0 mm(216)
    • 2.5 mm(106)
    • 3.0 mm(115)
    • 3.5 mm(60)
    • 4.0 mm(64)
    • 4.5 mm(34)
    • 5.0 mm(29)
    • 5.5 mm(17)
    • 6.0 mm(30)
    • 6.25 mm(3)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.014 in(1)
    • 0.016 in(8)
    • 0.019 in(7)
    • 0.02 in(71)
    • 0.024 in(5)
    • 0.028 in(46)
    • 0.03 in(42)
    • 0.031 in(59)
    • 0.039 in(221)
    • 0.049 in(162)
    • 0.06 in(318)
    • 0.069 in(95)
    • 0.079 in(216)
    • 0.098 in(106)
    • 0.119 in(115)
    • 0.138 in(60)
    • 0.157 in(64)
    • 0.177 in(34)
    • 0.197 in(29)
    • 0.217 in(17)
    • 0.237 in(30)
    • 0.246 in(3)
    Thread Pitch MinkomuThread Pitch Max
    Neck Diameter
    Neck Diameter
    • 0.268 in(2)
    • 0.29 in(1)
    • 0.291 in(1)
    • 0.351 in(2)
    • 0.48 in(1)
    • 0.49 in(1)
    • 0.492 in(1)
    • 0.535 in(1)
    • 0.59 in(1)
    • 0.591 in(1)
    • 0.654 in(1)
    • 0.732 in(1)
    • 0.748 in(1)
    • 0.886 in(1)
    • 0.941 in(1)
    • 0.946 in(2)
    • 1.063 in(1)
    • 1.22 in(2)
    • 1.417 in(1)
    • 1.496 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 6.801 mm(2)
    • 7.375 mm(1)
    • 7.4 mm(1)
    • 8.9 mm(2)
    • 12.201 mm(1)
    • 12.451 mm(1)
    • 12.5 mm(1)
    • 13.601 mm(1)
    • 14.976 mm(1)
    • 15.0 mm(1)
    • 16.6 mm(1)
    • 18.6 mm(1)
    • 19.0 mm(1)
    • 22.5 mm(1)
    • 23.875 mm(1)
    • 24.0 mm(2)
    • 27.0 mm(1)
    • 31.0 mm(2)
    • 36.0 mm(1)
    • 38.0 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    Chamfer Form
    Chamfer Form
    • FB (272)
    • PC (689)
    • PP (41)
    • SB (729)
    • TC (1)
    insertGeometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (393)
    • TM-RECTANGLE THREAD MILL 90 (141)
    • TM-TRIANGLE THREAD MILL 60 (47)
    • TN-TOP NOTCH (558)
    Insert IC Size
    Insert IC Size
    • 4.0 mm(1)
    • 4.75 mm(3)
    • 5.0 mm(7)
    • 6.0 mm(6)
    • 6.351 mm(71)
    • 9.525 mm(306)
    • 12.701 mm(42)
    • 15.875 mm(7)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.157 in(1)
    • 0.187 in(3)
    • 0.197 in(7)
    • 0.237 in(6)
    • 0.25 in(71)
    • 0.375 in(306)
    • 0.5 in(42)
    • 0.625 in(7)
    Insert IC Size MinkomuInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 1 (6)
    • 11 (17)
    • 16 (14)
    • 2 (80)
    • 3 (383)
    • 4 (68)
    • 4U (3)
    • 6 (15)
    • 8 (11)
    Cutting Edge Length
    Cutting Edge Length
    • 6.926 mm(1)
    • 8.65 mm(7)
    • 11.0 mm(17)
    • 16.0 mm(11)
    • 16.5 mm(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.273 in(1)
    • 0.341 in(7)
    • 0.433 in(17)
    • 0.63 in(11)
    • 0.65 in(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • B H (102)
    • B L (63)
    • C N (102)
    • D P (84)
    • H T (178)
    • H W (1464)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (115)
    • BORING BAR HEAD (7)
    • CYLINDRICAL (1868)
    • SHELL MILL (23)
    • SQUARE SHANK (147)
    • TAPER SHANK (17)
    System Size
    System Size
    • KM25 (17)
    Back-End Diameter
    Back-End Diameter
    • 2.801 mm(11)
    • 3.5 mm(26)
    • 3.575 mm(136)
    • 4.0 mm(12)
    • 4.275 mm(70)
    • 4.5 mm(41)
    • 4.926 mm(100)
    • 5.0 mm(1)
    • 5.5 mm(1)
    • 5.601 mm(3)
    • 6.0 mm(124)
    • 6.075 mm(1)
    • 6.2 mm(1)
    • 6.351 mm(11)
    • 6.476 mm(115)
    • 7.0 mm(62)
    • 7.9 mm(1)
    • 7.95 mm(10)
    • 8.0 mm(82)
    • 8.076 mm(116)
    • 8.201 mm(42)
    • 9.0 mm(84)
    • 9.326 mm(92)
    • 9.5 mm(1)
    • 9.525 mm(8)
    • 9.675 mm(104)
    • 10.0 mm(77)
    • 10.701 mm(1)
    • 10.9 mm(20)
    • 11.0 mm(62)
    • 11.101 mm(1)
    • 11.125 mm(7)
    • 12.0 mm(77)
    • 12.201 mm(57)
    • 12.701 mm(18)
    • 13.775 mm(2)
    • 14.0 mm(37)
    • 14.3 mm(6)
    • 14.976 mm(24)
    • 15.875 mm(10)
    • 15.9 mm(3)
    • 16.0 mm(39)
    • 17.475 mm(4)
    • 17.675 mm(1)
    • 17.7 mm(3)
    • 17.776 mm(4)
    • 18.0 mm(37)
    • 19.0 mm(9)
    • 19.05 mm(22)
    • 19.1 mm(1)
    • 20.0 mm(31)
    • 20.326 mm(8)
    • 22.0 mm(27)
    • 22.725 mm(2)
    • 22.75 mm(1)
    • 23.026 mm(3)
    • 25.0 mm(55)
    • 25.401 mm(36)
    • 25.925 mm(1)
    • 27.0 mm(3)
    • 28.0 mm(13)
    • 28.576 mm(2)
    • 31.75 mm(10)
    • 31.8 mm(7)
    • 32.0 mm(24)
    • 36.0 mm(1)
    • 38.1 mm(3)
    • 40.0 mm(8)
    • 44.45 mm(3)
    • 50.0 mm(1)
    • 50.801 mm(6)
    • 57.151 mm(1)
    • 63.5 mm(8)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.11 in(11)
    • 0.138 in(26)
    • 0.142 in(136)
    • 0.157 in(12)
    • 0.168 in(70)
    • 0.177 in(41)
    • 0.194 in(100)
    • 0.197 in(1)
    • 0.217 in(1)
    • 0.221 in(3)
    • 0.237 in(124)
    • 0.24 in(1)
    • 0.244 in(1)
    • 0.25 in(11)
    • 0.255 in(115)
    • 0.276 in(62)
    • 0.311 in(1)
    • 0.313 in(10)
    • 0.315 in(82)
    • 0.318 in(116)
    • 0.323 in(42)
    • 0.354 in(84)
    • 0.367 in(92)
    • 0.374 in(1)
    • 0.375 in(8)
    • 0.381 in(104)
    • 0.394 in(77)
    • 0.421 in(1)
    • 0.429 in(20)
    • 0.433 in(62)
    • 0.437 in(1)
    • 0.438 in(7)
    • 0.473 in(77)
    • 0.48 in(57)
    • 0.5 in(18)
    • 0.542 in(2)
    • 0.551 in(37)
    • 0.564 in(6)
    • 0.59 in(24)
    • 0.625 in(10)
    • 0.626 in(3)
    • 0.63 in(39)
    • 0.689 in(4)
    • 0.697 in(1)
    • 0.698 in(3)
    • 0.701 in(4)
    • 0.709 in(37)
    • 0.748 in(9)
    • 0.75 in(22)
    • 0.752 in(1)
    • 0.787 in(31)
    • 0.8 in(8)
    • 0.866 in(27)
    • 0.895 in(2)
    • 0.896 in(1)
    • 0.907 in(3)
    • 0.984 in(55)
    • 1.0 in(36)
    • 1.022 in(1)
    • 1.063 in(3)
    • 1.102 in(13)
    • 1.125 in(2)
    • 1.25 in(10)
    • 1.252 in(7)
    • 1.26 in(24)
    • 1.417 in(1)
    • 1.5 in(3)
    • 1.575 in(8)
    • 1.75 in(3)
    • 1.969 in(1)
    • 2.0 in(6)
    • 2.25 in(1)
    • 2.5 in(8)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(5)
    • 0.5 in(8)
    • 0.584 in(2)
    • 0.606 in(2)
    • 0.625 in(8)
    • 0.63 in(8)
    • 0.741 in(11)
    • 0.75 in(16)
    • 0.764 in(1)
    • 0.787 in(11)
    • 0.939 in(5)
    • 0.961 in(1)
    • 0.984 in(21)
    • 1.0 in(28)
    • 1.214 in(7)
    • 1.25 in(15)
    • 1.26 in(16)
    • 1.5 in(4)
    • 1.53 in(6)
    • 1.848 in(1)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 12.701 mm(8)
    • 14.826 mm(2)
    • 15.4 mm(2)
    • 15.875 mm(8)
    • 16.0 mm(8)
    • 18.825 mm(11)
    • 19.05 mm(16)
    • 19.401 mm(1)
    • 20.0 mm(11)
    • 23.826 mm(5)
    • 24.401 mm(1)
    • 25.0 mm(21)
    • 25.401 mm(28)
    • 30.826 mm(7)
    • 31.75 mm(15)
    • 32.0 mm(16)
    • 38.1 mm(4)
    • 38.825 mm(6)
    • 46.95 mm(1)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(5)
    • 0.5 in(8)
    • 0.625 in(8)
    • 0.63 in(8)
    • 0.75 in(16)
    • 0.787 in(12)
    • 0.864 in(5)
    • 0.984 in(23)
    • 1.0 in(28)
    • 1.141 in(7)
    • 1.25 in(15)
    • 1.26 in(13)
    • 1.455 in(6)
    • 1.5 in(4)
    • 1.848 in(1)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(5)
    • 12.701 mm(8)
    • 15.875 mm(8)
    • 16.0 mm(8)
    • 19.05 mm(16)
    • 20.0 mm(12)
    • 21.951 mm(5)
    • 25.0 mm(23)
    • 25.401 mm(28)
    • 28.951 mm(7)
    • 31.75 mm(15)
    • 32.0 mm(13)
    • 36.95 mm(6)
    • 38.1 mm(4)
    • 46.95 mm(1)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Soustružení závitů

    Soustružení závitů

    View Categories
    Frézování závitů

    Frézování závitů

    View Categories
    HSS Závitování

    HSS Závitování

    View Categories
    Karbidové závitování

    Karbidové závitování

    View Categories
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?