Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KM Systems

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1358)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1354)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1354)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1354)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1354)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1354)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1358)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1358)
    • M Stainless Steel (1343)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1343)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1343)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1343)
    • K Cast Iron (1383)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1383)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1383)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1383)
    • N Non-Ferrous Materials (1323)
      • N1
        Wrought Aluminum (1320)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1319)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(977)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1323)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1319)
      • N6
        Carbon, Graphite Composites, CFRP (1315)
      • N7
        MMC's (1177)
    • S High-Temp Alloys (1363)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1361)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1363)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1361)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1340)
    • H Hardened Materials (1205)
      • H1
        Hardened Materials 44-48 HRC(1205)
      • H2
        Hardened Materials 48-55 HRC(1205)
      • H3
        Hardened Materials 56-60 HRC(1188)
      • H4
        Hardened Materials >60 HRC(1012)
    • C CFRP Materials (1068)
      • C1
        CFRP, CFRP / CFRP (1064)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (949)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (44)
    • Convex DrillingConvex Drilling (7)
    • Cut-OffCut-Off (41)
    • Deep GroovingDeep Grooving (41)
    • DrillingDrilling (7)
    • Face GroovingFace Grooving (41)
    • FacingFacing (752)
    • GroovingGrooving (163)
    • ID FacingID Facing (6)
    • ID GroovingID Grooving (74)
    • ID Thread TurningID Thread Turning (128)
    • Inclined Entry DrillingInclined Entry Drilling (7)
    • Inclined Exit DrillingInclined Exit Drilling (7)
    • Multiple Direction CuttingMultiple Direction Cutting (899)
    • OD Thread TurningOD Thread Turning (158)
    • Plunge TurningPlunge Turning (50)
    • ProfilingProfiling (746)
    • TRN BoringTRN Boring (712)
    • ThreadingThreading (179)
    • TurningTurning (994)
    • X-Offset DrillingX-Offset Drilling (7)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(1)
    • 0.687 in(1)
    • 0.75 in(1)
    • 0.814 in(1)
    • 0.875 in(1)
    • 0.937 in(1)
    • 1.0 in(1)
    • 1.063 in(1)
    • 1.125 in(1)
    • 1.143 in(1)
    • 1.22 in(1)
    • 1.25 in(1)
    • 1.375 in(1)
    • 1.5 in(1)
    • 1.625 in(1)
    • 1.75 in(1)
    • 1.875 in(1)
    • 2.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(1)
    • 17.45 mm(1)
    • 19.05 mm(1)
    • 20.651 mm(1)
    • 22.225 mm(1)
    • 23.8 mm(1)
    • 25.401 mm(1)
    • 27.0 mm(1)
    • 28.576 mm(1)
    • 29.0 mm(1)
    • 31.0 mm(1)
    • 31.75 mm(1)
    • 34.926 mm(1)
    • 38.1 mm(1)
    • 41.276 mm(1)
    • 44.45 mm(1)
    • 47.625 mm(1)
    • 50.801 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Type of Thread
    Type of Thread
    • 55 (71)
    • 60 (196)
    • ACME (148)
    • API (99)
    • API BUTTRESS (16)
    • API RD (106)
    • BSPT (55)
    • BSW (125)
    • BUTTRESS (125)
    • M (147)
    • NPT (109)
    • NPTF (55)
    • RD DIN 405 (66)
    • STUB ACME (120)
    • TR DIN 103 (66)
    • UN (180)
    • UNJ (109)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1267)
    • Lightly Interrupted Cut (1288)
    • Smooth Cut (1289)
    • Varying Depth of Cut (1287)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 47.625 mm(1)
    • 52.401 mm(1)
    • 57.151 mm(1)
    • 61.901 mm(1)
    • 66.675 mm(1)
    • 71.45 mm(1)
    • 76.2 mm(1)
    • 81.0 mm(1)
    • 85.726 mm(1)
    • 87.0 mm(1)
    • 93.0 mm(1)
    • 95.25 mm(1)
    • 104.775 mm(1)
    • 114.301 mm(1)
    • 123.825 mm(1)
    • 133.35 mm(1)
    • 142.875 mm(1)
    • 152.4 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.875 in(1)
    • 2.063 in(1)
    • 2.25 in(1)
    • 2.437 in(1)
    • 2.625 in(1)
    • 2.813 in(1)
    • 3.0 in(1)
    • 3.189 in(1)
    • 3.375 in(1)
    • 3.426 in(1)
    • 3.661 in(1)
    • 3.75 in(1)
    • 4.125 in(1)
    • 4.5 in(1)
    • 4.875 in(1)
    • 5.25 in(1)
    • 5.625 in(1)
    • 6.0 in(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 2.52 in(1)
    • 2.835 in(1)
    • 2.992 in(1)
    • 3.189 in(1)
    • 3.386 in(1)
    • 3.543 in(1)
    • 3.74 in(1)
    • 3.781 in(1)
    • 4.055 in(1)
    • 4.213 in(1)
    • 4.331 in(1)
    • 4.606 in(1)
    • 5.079 in(1)
    • 5.472 in(1)
    • 6.22 in(1)
    • 6.575 in(1)
    • 7.165 in(1)
    • 7.521 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 64.0 mm(1)
    • 72.0 mm(1)
    • 76.0 mm(1)
    • 81.0 mm(1)
    • 86.0 mm(1)
    • 90.0 mm(1)
    • 95.0 mm(1)
    • 96.0 mm(1)
    • 103.0 mm(1)
    • 107.0 mm(1)
    • 110.0 mm(1)
    • 117.0 mm(1)
    • 129.0 mm(1)
    • 139.0 mm(1)
    • 158.0 mm(1)
    • 167.0 mm(1)
    • 182.0 mm(1)
    • 191.0 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (65)
    • 48.0 (14)
    • 49.783 (3)
    • 50.0 (3)
    • 61.0 (2)
    • 62.5 (20)
    • 63.0 (8)
    • 72.5 (3)
    • 75.0 (143)
    • 85.0 (4)
    • 90.0 (359)
    • 93.0 (354)
    • 95.0 (338)
    • 107.5 (82)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Cutoff Support Blade A1-A3 (3)
    • KM (973)
    Number of Flutes
    Number of Flutes
    • 2 (18)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (29)
    • 1.0 (875)
    • 2.0 (917)
    • 3.0 (263)
    • 4.0 (757)
    • 6.0 (130)
    • 8.0 (429)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.046 in(1)
    • 0.591 in(7)
    • 0.787 in(88)
    • 0.797 in(1)
    • 0.984 in(35)
    • 0.992 in(2)
    • 1.181 in(143)
    • 1.379 in(50)
    • 1.575 in(137)
    • 1.772 in(40)
    • 1.811 in(6)
    • 1.85 in(8)
    • 1.969 in(194)
    • 2.165 in(1)
    • 2.283 in(3)
    • 2.362 in(252)
    • 2.757 in(162)
    • 3.15 in(32)
    • 3.516 in(1)
    • 3.543 in(51)
    • 3.819 in(2)
    • 3.938 in(39)
    • 4.0 in(5)
    • 4.331 in(43)
    • 4.529 in(17)
    • 4.724 in(1)
    • 4.819 in(2)
    • 4.906 in(1)
    • 4.921 in(27)
    • 5.094 in(1)
    • 5.281 in(1)
    • 5.469 in(1)
    • 5.513 in(56)
    • 5.656 in(1)
    • 5.844 in(1)
    • 5.944 in(1)
    • 6.008 in(1)
    • 6.219 in(1)
    • 6.494 in(1)
    • 6.508 in(1)
    • 6.694 in(9)
    • 6.883 in(1)
    • 7.37 in(1)
    • 7.758 in(1)
    • 8.496 in(1)
    • 8.871 in(1)
    • 9.443 in(1)
    • 9.818 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 1.175 mm(1)
    • 15.0 mm(7)
    • 20.0 mm(88)
    • 20.25 mm(1)
    • 25.0 mm(35)
    • 25.201 mm(2)
    • 30.0 mm(143)
    • 35.0 mm(50)
    • 40.0 mm(137)
    • 45.0 mm(40)
    • 46.0 mm(6)
    • 47.0 mm(8)
    • 50.0 mm(194)
    • 55.0 mm(1)
    • 58.0 mm(3)
    • 60.0 mm(252)
    • 70.0 mm(162)
    • 80.0 mm(32)
    • 89.301 mm(1)
    • 90.0 mm(51)
    • 97.0 mm(2)
    • 100.0 mm(39)
    • 101.601 mm(5)
    • 110.0 mm(43)
    • 115.0 mm(17)
    • 120.0 mm(1)
    • 122.4 mm(2)
    • 124.625 mm(1)
    • 125.0 mm(27)
    • 129.4 mm(1)
    • 134.15 mm(1)
    • 138.925 mm(1)
    • 140.0 mm(56)
    • 143.675 mm(1)
    • 148.425 mm(1)
    • 150.951 mm(1)
    • 152.6 mm(1)
    • 157.951 mm(1)
    • 164.951 mm(1)
    • 165.3 mm(1)
    • 170.0 mm(9)
    • 174.826 mm(1)
    • 187.201 mm(1)
    • 197.05 mm(1)
    • 215.8 mm(1)
    • 225.326 mm(1)
    • 239.851 mm(1)
    • 249.375 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(35)
    • 0.001 in(88)
    • 0.002 in(227)
    • 0.003 in(175)
    • 0.004 in(846)
    • 0.005 in(71)
    • 0.006 in(128)
    • 0.007 in(121)
    • 0.008 in(887)
    • 0.01 in(118)
    • 0.011 in(79)
    • 0.012 in(77)
    • 0.014 in(204)
    • 0.015 in(19)
    • 0.016 in(1042)
    • 0.017 in(16)
    • 0.019 in(80)
    • 0.02 in(106)
    • 0.021 in(7)
    • 0.023 in(83)
    • 0.024 in(58)
    • 0.027 in(3)
    • 0.028 in(14)
    • 0.03 in(58)
    • 0.031 in(1177)
    • 0.033 in(5)
    • 0.034 in(4)
    • 0.035 in(80)
    • 0.037 in(19)
    • 0.038 in(3)
    • 0.039 in(115)
    • -0.039 in(29)
    • 0.041 in(8)
    • 0.047 in(1082)
    • 0.049 in(99)
    • 0.055 in(5)
    • 0.06 in(112)
    • 0.062 in(195)
    • 0.063 in(901)
    • 0.069 in(99)
    • 0.078 in(54)
    • 0.079 in(84)
    • 0.08 in(4)
    • 0.089 in(80)
    • 0.094 in(179)
    • 0.095 in(352)
    • 0.098 in(28)
    • 0.099 in(2)
    • 0.125 in(55)
    • 0.126 in(117)
    • 0.157 in(29)
    • 0.188 in(2)
    • 0.197 in(3)
    • 0.237 in(4)
    • 0.25 in(11)
    • 0.315 in(1)
    • 0.394 in(3)
    • 0.492 in(5)
    • 0.63 in(4)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(35)
    • 0.025 mm(88)
    • 0.05 mm(227)
    • 0.076 mm(175)
    • 0.1 mm(846)
    • 0.125 mm(71)
    • 0.151 mm(128)
    • 0.176 mm(121)
    • 0.2 mm(887)
    • 0.225 mm(70)
    • 0.25 mm(115)
    • 0.275 mm(79)
    • 0.301 mm(77)
    • 0.325 mm(96)
    • 0.351 mm(188)
    • 0.375 mm(19)
    • 0.4 mm(1042)
    • 0.426 mm(16)
    • 0.45 mm(80)
    • 0.476 mm(26)
    • 0.5 mm(106)
    • 0.525 mm(7)
    • 0.576 mm(83)
    • 0.601 mm(58)
    • 0.65 mm(3)
    • 0.701 mm(14)
    • 0.75 mm(58)
    • 0.775 mm(99)
    • 0.8 mm(1078)
    • 0.826 mm(5)
    • 0.851 mm(4)
    • 0.9 mm(80)
    • 0.925 mm(19)
    • 0.976 mm(3)
    • 1.0 mm(115)
    • -1.0 mm(29)
    • 1.05 mm(8)
    • 1.201 mm(1082)
    • 1.25 mm(99)
    • 1.401 mm(5)
    • 1.5 mm(108)
    • 1.526 mm(13)
    • 1.576 mm(195)
    • 1.6 mm(901)
    • 1.75 mm(99)
    • 1.975 mm(54)
    • 2.0 mm(84)
    • 2.025 mm(4)
    • 2.25 mm(80)
    • 2.375 mm(179)
    • 2.401 mm(352)
    • 2.5 mm(28)
    • 2.526 mm(2)
    • 3.176 mm(55)
    • 3.2 mm(117)
    • 4.0 mm(29)
    • 4.775 mm(2)
    • 5.0 mm(3)
    • 6.0 mm(4)
    • 6.351 mm(11)
    • 8.0 mm(1)
    • 10.0 mm(3)
    • 12.5 mm(5)
    • 16.0 mm(4)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (605)
    • 241 (141)
    • AC5 (7)
    • ALO (6)
    • C2 (6)
    • C3 (6)
    • CBN6 (6)
    • CG4 (3)
    • CG5 (53)
    • CG6 (18)
    • CL4 (406)
    • CM1 (53)
    • CM2 (603)
    • CM3 (440)
    • CM4 (283)
    • CM5 (7)
    • CPD1 (6)
    • CPX (590)
    • CS5 (18)
    • CW2 (278)
    • CW2015 (534)
    • CW3020 (15)
    • CW5025 (599)
    • GH1 (36)
    • GX (298)
    • HCK10 (63)
    • HCK20 (14)
    • HCM15 (3)
    • HK1500 (477)
    • HK35 (57)
    • HT2 (410)
    • HTX (290)
    • HWK10 (5)
    • HWK15 (66)
    • K00326 (29)
    • K00331 (27)
    • K060 (363)
    • K090 (681)
    • K1 (235)
    • K1010P (36)
    • K1025 (4)
    • K10M (805)
    • K10P (737)
    • K10U (712)
    • K15 (35)
    • K15U (703)
    • K20K (813)
    • K21 (326)
    • K25M (731)
    • K25P (721)
    • K2885 (99)
    • K313 (1184)
    • K35P (474)
    • K420 (734)
    • K45 (425)
    • K4H (77)
    • K6 (9)
    • K68 (1093)
    • K8735 (29)
    • KB1340 (262)
    • KB1345 (449)
    • KB1610 (604)
    • KB1625 (486)
    • KB1630 (501)
    • KB5610 (509)
    • KB5625 (606)
    • KB5630 (409)
    • KB9610 (731)
    • KB9640 (327)
    • KBH10 (657)
    • KBH10B (433)
    • KBH20 (789)
    • KBH20B (433)
    • KBK35 (149)
    • KBK45 (11)
    • KC210 (512)
    • KC250 (611)
    • KC5010 (1286)
    • KC5020P (70)
    • KC5025 (1277)
    • KC5035 (2)
    • KC5410 (1066)
    • KC5510 (759)
    • KC5525 (496)
    • KC710 (328)
    • KC7140 (18)
    • KC720 (1014)
    • KC7215 (18)
    • KC722 (296)
    • KC7225 (18)
    • KC730 (1111)
    • KC7310 (816)
    • KC732 (840)
    • KC7815 (18)
    • KC7820 (12)
    • KC7845 (6)
    • KC7935 (18)
    • KC8050 (1076)
    • KC810 (1169)
    • KC850 (1206)
    • KC9010 (916)
    • KC9025 (1055)
    • KC910 (1072)
    • KC9105 (967)
    • KC9110 (1229)
    • KC9120 (1032)
    • KC9125 (1104)
    • KC9125RR (71)
    • KC9140 (798)
    • KC9145 (708)
    • KC9210 (108)
    • KC9215 (768)
    • KC9225 (1033)
    • KC9240 (1030)
    • KC9240NEW (1020)
    • KC9245 (767)
    • KC9315 (1046)
    • KC9320 (1108)
    • KC9325 (938)
    • KC935 (1177)
    • KC950 (1068)
    • KC990 (982)
    • KCD25 (356)
    • KCK05 (1029)
    • KCK05B (857)
    • KCK15 (958)
    • KCK15B (1002)
    • KCK20 (1123)
    • KCK20B (1138)
    • KCM15 (985)
    • KCM15B (905)
    • KCM25 (1053)
    • KCM25B (979)
    • KCM25S (55)
    • KCM35 (877)
    • KCM35B (613)
    • KCMS35 (15)
    • KCP05 (947)
    • KCP05B (689)
    • KCP10 (1098)
    • KCP10B (1182)
    • KCP15 (18)
    • KCP20S (55)
    • KCP25 (1112)
    • KCP25B (1196)
    • KCP25C (1216)
    • KCP30 (1015)
    • KCP30B (730)
    • KCP40 (685)
    • KCP40B (775)
    • KCPK05 (775)
    • KCPK10 (18)
    • KCS10 (383)
    • KCS10B (967)
    • KCS25S (55)
    • KCU10 (1228)
    • KCU10B (1217)
    • KCU25 (1210)
    • KCU25B (1205)
    • KCU40 (18)
    • KD050 (584)
    • KD081 (551)
    • KD100 (490)
    • KD105 (61)
    • KD120 (598)
    • KD1400 (587)
    • KD1405 (402)
    • KD1425 (688)
    • KM1 (301)
    • KMF (162)
    • KMS (11)
    • KN10S (71)
    • KS15 (170)
    • KT1120 (161)
    • KT125 (631)
    • KT150 (460)
    • KT175 (812)
    • KT315 (1075)
    • KT325 (443)
    • KT5020 (75)
    • KTP10 (818)
    • KTP25S (610)
    • KU10 (177)
    • KU10T (991)
    • KU25T (155)
    • KU30T (1119)
    • KU40D (18)
    • KY1310 (500)
    • KY1320 (709)
    • KY1525 (15)
    • KY1540 (406)
    • KY1615 (651)
    • KY2000 (437)
    • KY2100 (336)
    • KY2200 (3)
    • KY3000 (748)
    • KY3400 (583)
    • KY3500 (754)
    • KY4000 (303)
    • KY4300 (333)
    • KY4400 (683)
    • KYHK15B (693)
    • KYK10 (433)
    • KYK25 (555)
    • KYK35 (737)
    • KYS25 (374)
    • KYS30 (434)
    • MC2 (14)
    • MC3 (4)
    • NL200 (249)
    • NL250 (748)
    • NL300 (531)
    • NL400 (278)
    • NL920 (609)
    • P25 (271)
    • PB100 (186)
    • PB170 (160)
    • PB250 (196)
    • PB300 (133)
    • PD100 (62)
    • PD50 (46)
    • PN120 (13)
    • PS5 (288)
    • SP0819 (482)
    • SP0A00 (60)
    • SP0G00 (8)
    • SP0NTA (2)
    • SP0PW3 (10)
    • SP3019 (424)
    • SP4019 (504)
    • SP4036 (46)
    • SP4066 (11)
    • SP4093 (46)
    • SP61EJ (71)
    • SPADAP (75)
    • SPB400 (10)
    • SPMQMA (12)
    • SPN3W1 (16)
    • SPN4W2 (28)
    • SPSREJ (21)
    • THM (509)
    • THM-X (329)
    • THMF-X (215)
    • TN10P (845)
    • TN10U (635)
    • TN15M (734)
    • TN15U (612)
    • TN2000 (516)
    • TN20K (764)
    • TN20P (811)
    • TN30M (773)
    • TN30P (585)
    • TN4000 (474)
    • TN5015 (689)
    • TN5020 (612)
    • TN5105 (597)
    • TN5120 (711)
    • TN6010 (559)
    • TN6025 (624)
    • TN7 (6)
    • TN7005 (489)
    • TN7010 (744)
    • TN7015 (770)
    • TN7025 (763)
    • TN7035 (601)
    • TN7105 (454)
    • TN7110 (815)
    • TN7115 (737)
    • TN7125 (666)
    • TN7135 (605)
    • TN8025 (714)
    • TTI15 (329)
    • TTM (38)
    • TTM09 (176)
    • TTR (308)
    • TTR-X (28)
    • TTS (378)
    • TTX (333)
    • W00160 (7)
    • W00162 (19)
    • W00342 (82)
    • WBH10C (556)
    • WBH10P (396)
    • WBH10U (540)
    • WBH20P (571)
    • WBH25P (500)
    • WBH25U (458)
    • WBH30P (396)
    • WBK40U (236)
    • WBK45U (414)
    • WDN00U (311)
    • WDN10U (6)
    • WDN25U (545)
    • WK05CT (773)
    • WK15CT (485)
    • WK20CT (882)
    • WM15CT (860)
    • WM25CT (874)
    • WM35CT (671)
    • WP05CT (183)
    • WP15CT (903)
    • WP20TT (79)
    • WP25CT (929)
    • WP35CT (799)
    • WS10PT (737)
    • WS25PT (747)
    • WU05PT (84)
    • WU10HT (773)
    • WU10PT (610)
    • WU25PT (577)
    • X00511 (141)
    • X00580 (141)
    • X00581 (141)
    • X00582 (141)
    • X00583 (141)
    • X00584 (141)
    • X00585 (141)
    • X00586 (141)
    • X00591 (141)
    • X00592 (141)
    • X00593 (141)
    • X00594 (141)
    • X00596 (141)
    • X00597 (141)
    • X00599 (141)
    • YY3A00 (6)
    • YY72VD (2)
    Hand Of Tool
    Hand Of Tool
    • L (438)
    • N (52)
    • N - Neutral (3)
    • R (483)
    Wiper Insert
    Wiper Insert
    • N (1373)
    • Y (550)
    Drill Type
    Drill Type
    • 86-01 (18)
    F Dimension
    F Dimension
    • 0.0 mm(54)
    • 1.701 mm(1)
    • 2.0 mm(2)
    • 4.0 mm(1)
    • 5.0 mm(1)
    • 5.75 mm(3)
    • 5.801 mm(3)
    • 7.0 mm(15)
    • 7.351 mm(3)
    • 7.525 mm(3)
    • 8.0 mm(34)
    • 9.0 mm(19)
    • 10.0 mm(68)
    • 11.0 mm(31)
    • 12.5 mm(36)
    • 13.0 mm(32)
    • 16.0 mm(38)
    • 17.0 mm(92)
    • 22.0 mm(128)
    • 24.0 mm(13)
    • 25.3 mm(1)
    • 27.0 mm(129)
    • 28.5 mm(2)
    • 30.0 mm(18)
    • 32.0 mm(2)
    • 35.0 mm(66)
    • 38.0 mm(18)
    • 43.0 mm(62)
    • 48.0 mm(17)
    • 53.0 mm(49)
    • 59.0 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(54)
    • 0.067 in(1)
    • 0.079 in(2)
    • 0.157 in(1)
    • 0.197 in(1)
    • 0.226 in(3)
    • 0.228 in(3)
    • 0.276 in(15)
    • 0.289 in(3)
    • 0.296 in(3)
    • 0.315 in(34)
    • 0.354 in(19)
    • 0.394 in(68)
    • 0.433 in(31)
    • 0.492 in(36)
    • 0.512 in(32)
    • 0.63 in(38)
    • 0.669 in(92)
    • 0.866 in(128)
    • 0.946 in(13)
    • 0.996 in(1)
    • 1.063 in(129)
    • 1.122 in(2)
    • 1.181 in(18)
    • 1.26 in(2)
    • 1.379 in(66)
    • 1.496 in(18)
    • 1.693 in(62)
    • 1.891 in(17)
    • 2.087 in(49)
    • 2.323 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(51)
    • -1.0 mm(19)
    • 11.101 mm(3)
    • 11.15 mm(3)
    • 13.0 mm(15)
    • 14.25 mm(3)
    • 16.0 mm(19)
    • 18.5 mm(5)
    • 20.0 mm(26)
    • 25.0 mm(37)
    • 32.0 mm(87)
    • 34.0 mm(6)
    • 40.0 mm(89)
    • 41.301 mm(20)
    • 44.0 mm(18)
    • 47.6 mm(20)
    • 50.0 mm(87)
    • 54.0 mm(51)
    • 56.625 mm(20)
    • 57.2 mm(11)
    • 60.0 mm(2)
    • 63.0 mm(32)
    • 64.0 mm(2)
    • 70.0 mm(54)
    • 74.0 mm(4)
    • 80.0 mm(59)
    • 86.0 mm(91)
    • 88.9 mm(40)
    • 90.0 mm(6)
    • 94.0 mm(2)
    • 100.0 mm(46)
    • 104.0 mm(2)
    • 106.0 mm(71)
    • 118.0 mm(2)
    • 120.0 mm(3)
    • 139.701 mm(20)
    • 150.0 mm(1)
    • 174.601 mm(20)
    • 209.601 mm(11)
    • 222.3 mm(11)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(51)
    • -0.039 in(19)
    • 0.437 in(3)
    • 0.439 in(3)
    • 0.512 in(15)
    • 0.561 in(3)
    • 0.63 in(19)
    • 0.728 in(5)
    • 0.787 in(26)
    • 0.984 in(37)
    • 1.26 in(87)
    • 1.339 in(6)
    • 1.575 in(89)
    • 1.627 in(20)
    • 1.732 in(18)
    • 1.874 in(20)
    • 1.969 in(87)
    • 2.126 in(51)
    • 2.229 in(20)
    • 2.253 in(11)
    • 2.362 in(2)
    • 2.48 in(32)
    • 2.52 in(2)
    • 2.757 in(54)
    • 2.914 in(4)
    • 3.15 in(59)
    • 3.386 in(91)
    • 3.5 in(40)
    • 3.543 in(6)
    • 3.701 in(2)
    • 3.938 in(46)
    • 4.094 in(2)
    • 4.173 in(71)
    • 4.646 in(2)
    • 4.724 in(3)
    • 5.5 in(20)
    • 5.906 in(1)
    • 6.875 in(20)
    • 8.252 in(11)
    • 8.752 in(11)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -0.039 in(29)
    • 1.024 in(2)
    • 1.063 in(2)
    • 1.26 in(10)
    • 393.661 in(129)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(29)
    • 26.0 mm(2)
    • 27.0 mm(2)
    • 32.0 mm(10)
    • 9999.0 mm(129)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (233)
    • E (250)
    • P (2)
    • S (472)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (522)
    • DOUBLE POSITIVE (4)
    • NEGATIVE-ZERO (74)
    • NEUTRAL (ZERO) (305)
    • POSITIVE-NEGATIVE (1)
    • POSITIVE-ZERO (40)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.379 in(30)
    • 1.385 in(5)
    • 1.387 in(2)
    • 1.43 in(1)
    • 1.508 in(3)
    • 1.575 in(82)
    • 1.614 in(6)
    • 1.655 in(7)
    • 1.661 in(7)
    • 1.665 in(2)
    • 1.701 in(2)
    • 1.772 in(19)
    • 1.938 in(2)
    • 1.969 in(112)
    • 1.986 in(2)
    • 2.039 in(3)
    • 2.165 in(1)
    • 2.169 in(15)
    • 2.205 in(2)
    • 2.209 in(11)
    • 2.211 in(2)
    • 2.283 in(4)
    • 2.362 in(146)
    • 2.382 in(4)
    • 2.444 in(3)
    • 2.757 in(92)
    • 2.761 in(2)
    • 2.769 in(4)
    • 2.77 in(1)
    • 2.775 in(6)
    • 2.953 in(3)
    • 2.955 in(17)
    • 2.993 in(8)
    • 3.037 in(4)
    • 3.044 in(8)
    • 3.132 in(1)
    • 3.15 in(13)
    • 3.152 in(2)
    • 3.2 in(4)
    • 3.434 in(8)
    • 3.446 in(4)
    • 3.469 in(2)
    • 3.473 in(8)
    • 3.476 in(4)
    • 3.485 in(2)
    • 3.593 in(4)
    • 3.594 in(2)
    • 3.781 in(12)
    • 3.789 in(8)
    • 3.907 in(1)
    • 3.938 in(8)
    • 4.11 in(4)
    • 4.412 in(12)
    • 4.418 in(2)
    • 4.464 in(1)
    • 4.529 in(17)
    • 4.612 in(10)
    • 4.621 in(1)
    • 4.724 in(2)
    • 4.726 in(4)
    • 4.738 in(13)
    • 5.513 in(4)
    • 5.883 in(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 35.0 mm(30)
    • 35.15 mm(5)
    • 35.2 mm(2)
    • 36.325 mm(1)
    • 38.301 mm(3)
    • 40.0 mm(82)
    • 41.0 mm(6)
    • 42.0 mm(5)
    • 42.026 mm(2)
    • 42.2 mm(7)
    • 42.276 mm(2)
    • 43.2 mm(2)
    • 45.0 mm(19)
    • 49.225 mm(2)
    • 50.0 mm(112)
    • 50.45 mm(2)
    • 51.801 mm(3)
    • 55.0 mm(1)
    • 55.1 mm(15)
    • 56.0 mm(2)
    • 56.1 mm(11)
    • 56.151 mm(2)
    • 58.0 mm(4)
    • 60.0 mm(146)
    • 60.475 mm(4)
    • 62.075 mm(3)
    • 70.0 mm(80)
    • 70.025 mm(12)
    • 70.101 mm(2)
    • 70.325 mm(4)
    • 70.351 mm(1)
    • 70.476 mm(6)
    • 75.0 mm(3)
    • 75.05 mm(17)
    • 76.025 mm(8)
    • 77.15 mm(4)
    • 77.325 mm(8)
    • 79.551 mm(1)
    • 80.0 mm(13)
    • 80.051 mm(2)
    • 81.25 mm(4)
    • 87.226 mm(8)
    • 87.5 mm(4)
    • 88.101 mm(2)
    • 88.226 mm(8)
    • 88.301 mm(4)
    • 88.525 mm(2)
    • 91.25 mm(4)
    • 91.275 mm(2)
    • 96.025 mm(12)
    • 96.25 mm(8)
    • 99.25 mm(1)
    • 100.0 mm(8)
    • 104.4 mm(4)
    • 112.075 mm(12)
    • 112.226 mm(2)
    • 113.375 mm(1)
    • 115.0 mm(17)
    • 117.15 mm(10)
    • 117.375 mm(1)
    • 120.0 mm(2)
    • 120.025 mm(4)
    • 120.351 mm(13)
    • 140.0 mm(4)
    • 149.4 mm(8)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (7)
    • S (361)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • BORING BAR ADAPTER (89)
    • CARTRIDGE MOUNT (47)
    • COMBI SHELL ADAPTER (19)
    • CUTOFF SUPPORT BLADE (22)
    • DRILL CHUCK ADAPTER (4)
    • DRILL SHANK 2 FLATS (8)
    • END MILL ADAPTER (81)
    • ER COLLET CHUCK (42)
    • EXTENSION (15)
    • HYDRAULIC CHUCK (33)
    • HYDRAULIC CHUCK-HIGH TORQUE (4)
    • HYDRAULIC CHUCK-SLIM LINE (15)
    • KM MODULAR ADAPTER (67)
    • KM MODULAR ADAPTER-4 UNITS (2)
    • RC TAP CHUCK ADAPTER-T & C (2)
    • REDUCER (41)
    • SCREW-ON ADAPTER (16)
    • SHELL MILL ADAPTER (65)
    • SHRINK FIT ADAPTER (48)
    • SQUARE SHANK ADAPTER (48)
    • SQUARE SHANK ADAPTER-2 SLOTS (2)
    • SQUARE SHANK ADAPTER-4 SLOTS (1)
    • TAP CHUCK ADAPTER (4)
    • WHISTLE DRIVE ADAPTER (3)
    • WHISTLE NOTCH ADAPTER (39)
    Clamp Style
    Clamp Style
    • C (28)
    • D (119)
    • M (470)
    • N (180)
    • P (242)
    • S (319)
    • W (2)
    • Y (36)
    Cutting Width
    Cutting Width
    • 0.02 in(45)
    • 0.031 in(45)
    • 0.035 in(45)
    • 0.039 in(99)
    • 0.041 in(45)
    • 0.047 in(99)
    • 0.055 in(45)
    • 0.058 in(45)
    • 0.06 in(106)
    • 0.061 in(1)
    • 0.062 in(99)
    • 0.063 in(1)
    • 0.067 in(45)
    • 0.069 in(99)
    • 0.073 in(54)
    • 0.077 in(45)
    • 0.078 in(54)
    • 0.079 in(107)
    • 0.084 in(8)
    • 0.088 in(101)
    • 0.089 in(73)
    • 0.094 in(29)
    • 0.095 in(102)
    • 0.097 in(57)
    • 0.098 in(102)
    • 0.104 in(3)
    • 0.105 in(54)
    • 0.108 in(99)
    • 0.11 in(54)
    • 0.119 in(134)
    • 0.12 in(9)
    • 0.122 in(63)
    • 0.123 in(9)
    • 0.125 in(134)
    • 0.126 in(125)
    • 0.128 in(99)
    • 0.129 in(45)
    • 0.13 in(9)
    • 0.131 in(26)
    • 0.138 in(125)
    • 0.143 in(54)
    • 0.147 in(22)
    • 0.15 in(23)
    • 0.151 in(22)
    • 0.152 in(45)
    • 0.156 in(54)
    • 0.157 in(84)
    • 0.161 in(4)
    • 0.162 in(4)
    • 0.167 in(80)
    • 0.169 in(54)
    • 0.177 in(80)
    • 0.178 in(54)
    • 0.185 in(67)
    • 0.187 in(4)
    • 0.188 in(80)
    • 0.189 in(80)
    • 0.192 in(26)
    • 0.193 in(30)
    • 0.195 in(54)
    • 0.196 in(54)
    • 0.197 in(31)
    • 0.199 in(2)
    • 0.201 in(2)
    • 0.202 in(28)
    • 0.213 in(26)
    • 0.217 in(26)
    • 0.218 in(2)
    • 0.219 in(26)
    • 0.237 in(29)
    • 0.25 in(31)
    • 0.256 in(26)
    • 0.276 in(3)
    • 0.281 in(5)
    • 0.312 in(5)
    • 0.315 in(2)
    • 0.345 in(3)
    • 0.354 in(3)
    • 0.375 in(5)
    • 0.381 in(3)
    • 0.384 in(2)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(45)
    • 0.775 mm(45)
    • 0.8 mm(45)
    • 0.9 mm(45)
    • 1.0 mm(99)
    • 1.05 mm(45)
    • 1.201 mm(99)
    • 1.401 mm(45)
    • 1.475 mm(45)
    • 1.5 mm(106)
    • 1.55 mm(1)
    • 1.576 mm(99)
    • 1.6 mm(1)
    • 1.701 mm(45)
    • 1.75 mm(99)
    • 1.826 mm(54)
    • 1.951 mm(45)
    • 1.975 mm(54)
    • 2.0 mm(107)
    • 2.125 mm(8)
    • 2.2 mm(101)
    • 2.225 mm(99)
    • 2.25 mm(73)
    • 2.375 mm(29)
    • 2.401 mm(102)
    • 2.475 mm(57)
    • 2.5 mm(102)
    • 2.625 mm(3)
    • 2.676 mm(54)
    • 2.75 mm(99)
    • 2.801 mm(54)
    • 3.0 mm(134)
    • 3.051 mm(9)
    • 3.1 mm(63)
    • 3.125 mm(9)
    • 3.176 mm(134)
    • 3.2 mm(125)
    • 3.25 mm(99)
    • 3.276 mm(45)
    • 3.301 mm(9)
    • 3.325 mm(26)
    • 3.5 mm(125)
    • 3.6 mm(54)
    • 3.725 mm(22)
    • 3.801 mm(23)
    • 3.825 mm(22)
    • 3.85 mm(45)
    • 3.95 mm(54)
    • 3.975 mm(26)
    • 4.0 mm(84)
    • 4.101 mm(4)
    • 4.125 mm(4)
    • 4.25 mm(80)
    • 4.3 mm(54)
    • 4.5 mm(80)
    • 4.525 mm(54)
    • 4.7 mm(67)
    • 4.75 mm(4)
    • 4.775 mm(80)
    • 4.801 mm(80)
    • 4.875 mm(26)
    • 4.9 mm(30)
    • 4.95 mm(54)
    • 4.976 mm(54)
    • 5.0 mm(31)
    • 5.051 mm(2)
    • 5.101 mm(2)
    • 5.125 mm(28)
    • 5.4 mm(26)
    • 5.5 mm(26)
    • 5.525 mm(2)
    • 5.575 mm(26)
    • 6.0 mm(29)
    • 6.351 mm(31)
    • 6.5 mm(26)
    • 7.0 mm(3)
    • 7.125 mm(5)
    • 7.926 mm(5)
    • 8.0 mm(2)
    • 8.75 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(5)
    • 9.675 mm(3)
    • 9.75 mm(2)
    Cutting Width MinkomuCutting Width Max
    Front End Type
    Front End Type
    • BKA - Boring Head Adapter (7)
    • FDA - Milling Cutter Arbor (77)
    • KMM - KM Micro System (38)
    • KMS - KM TBD System (21)
    • KMT - KM Adapter (51)
    • MCS - Modular Cartridge System (47)
    • PMK - Prismatic Adapter Kenna (22)
    • SPK-Holding Arbor-Spindle Head (7)
    • SWB - Tap Chuck Adapter (6)
    • SZK - Collet Taper (42)
    • VKT - Square Shank (51)
    • ZYL - Cylindrical Adapter (348)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (320)
    • D-DIAMOND/RHOMBIC 55 (330)
    • LT-TRIANGLE LAY DOWN THREAD 60 (84)
    • N/K-PARALLELOGRAM 55 (4)
    • ON EDGE MISC (2)
    • PRISMATIC (36)
    • R-ROUND (34)
    • S-SQUARE 90 (153)
    • T-TRIANGLE 60 (115)
    • TN-TOP NOTCH (130)
    • V-DIAMOND/RHOMBIC 35 (115)
    • W-TRIGON 80 (75)
    • X-TRIGON 84 (18)
    Front End Style
    Front End Style
    • BKA01 Intchg Heads (H) Pilot (7)
    • FDA03 Longit &Transver Drive (2)
    • FDA12 Transv Drive&CutRetScr (10)
    • FDA13 Long&TranDrv&CutRetScr (10)
    • FDA22 Transv Drive & SHCS (44)
    • FDA23 Longit&Transv Drv&SHCS (7)
    • FDA42TranDrvw/CtrScrwORBoltCir (4)
    • KMM01 Std Km-Micro Size (16)
    • KMM02 Enlarged Flange (22)
    • KMS-01 Std KM-TBD NotOnCntr (8)
    • KMS-02 Englarged Flange OnCntr (13)
    • KMT00 All KM, except 02,05,09 (51)
    • MCS01 Modular Deep Grooving (47)
    • PMK02 Cutoff Sup Bld A1-A3 (14)
    • PMK03 CutOffBld A1-A3 Hlfw/Pin (8)
    • SPK02 Bolt Circ Dia 101.6 mm (7)
    • SWB-01 WFL#...WES#(Bilz) (6)
    • SZK02 Collets 8 Degree Taper (42)
    • VKT01 Std Design (51)
    • ZYL01 Straight Shank (105)
    • ZYL03 Attachment Thread (16)
    • ZYL10 Weldon Shank (71)
    • ZYL13 2Deg-Whistle Notch (39)
    • ZYL14 Weldon+Whistle Notch (10)
    • ZYL22 Boring Bar Shank (96)
    • ZYL56 2Plain Clamp Surf w/Pcs (8)
    • ZYL63 2Deg Surf w/Cyl.w/drive (3)
    Insert Size
    Insert Size
    • 1 (7)
    • 2 (53)
    • 2B (3)
    • 3 (63)
    • 4 (30)
    • 5 (5)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(13)
    • 0.119 in(3)
    • 0.125 in(1)
    • 0.138 in(18)
    • 0.177 in(3)
    • 0.21 in(27)
    • 0.294 in(8)
    • 0.299 in(2)
    • 0.354 in(1)
    • 0.404 in(3)
    • 0.416 in(2)
    • 0.433 in(1)
    • 0.531 in(5)
    • 0.551 in(11)
    • 0.572 in(2)
    • 0.63 in(13)
    • 0.748 in(1)
    • 0.787 in(1)
    • 1.299 in(1)
    • 1.581 in(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(13)
    • 3.0 mm(3)
    • 3.176 mm(1)
    • 3.5 mm(18)
    • 4.5 mm(3)
    • 5.325 mm(27)
    • 7.476 mm(8)
    • 7.601 mm(2)
    • 9.0 mm(1)
    • 10.25 mm(3)
    • 10.55 mm(2)
    • 11.0 mm(1)
    • 13.5 mm(5)
    • 14.0 mm(11)
    • 14.5 mm(2)
    • 16.0 mm(13)
    • 19.0 mm(1)
    • 20.0 mm(1)
    • 33.0 mm(1)
    • 40.151 mm(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 4 in(6)
    • 3 in(3)
    • 5 in(1)
    • 0.189 in(6)
    • 0.551 in(9)
    • 0.63 in(9)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.787 in(2)
    • 0.906 in(4)
    • 0.921 in(2)
    • 0.984 in(12)
    • 1.024 in(11)
    • 1.102 in(9)
    • 1.113 in(2)
    • 1.181 in(21)
    • 1.238 in(1)
    • 1.26 in(20)
    • 1.379 in(4)
    • 1.385 in(2)
    • 1.389 in(4)
    • 1.417 in(2)
    • 1.48 in(4)
    • 1.496 in(4)
    • 1.5 in(1)
    • 1.532 in(2)
    • 1.575 in(24)
    • 1.655 in(1)
    • 1.693 in(3)
    • 1.77 in(1)
    • 1.772 in(21)
    • 1.774 in(1)
    • 1.846 in(4)
    • 1.85 in(7)
    • 1.891 in(6)
    • 1.901 in(1)
    • 1.937 in(2)
    • 1.969 in(15)
    • 1.971 in(1)
    • 1.98 in(2)
    • 2.008 in(1)
    • 2.106 in(4)
    • 2.165 in(18)
    • 2.177 in(4)
    • 2.244 in(4)
    • 2.25 in(2)
    • 2.283 in(4)
    • 2.299 in(1)
    • 2.303 in(7)
    • 2.323 in(4)
    • 2.362 in(38)
    • 2.48 in(4)
    • 2.5 in(10)
    • 2.559 in(29)
    • 2.618 in(4)
    • 2.757 in(36)
    • 2.758 in(1)
    • 2.953 in(14)
    • 2.955 in(1)
    • 3.055 in(1)
    • 3.071 in(2)
    • 3.098 in(1)
    • 3.15 in(52)
    • 3.25 in(2)
    • 3.307 in(3)
    • 3.346 in(20)
    • 3.375 in(1)
    • 3.5 in(3)
    • 3.516 in(1)
    • 3.543 in(30)
    • 3.74 in(14)
    • 3.75 in(1)
    • 3.819 in(4)
    • 3.919 in(1)
    • 3.93 in(1)
    • 3.934 in(1)
    • 3.938 in(36)
    • 4.083 in(1)
    • 4.118 in(2)
    • 4.134 in(16)
    • 4.291 in(5)
    • 4.331 in(5)
    • 4.366 in(1)
    • 4.488 in(2)
    • 4.5 in(4)
    • 4.529 in(4)
    • 4.532 in(1)
    • 4.724 in(18)
    • 4.819 in(2)
    • 4.874 in(2)
    • 4.921 in(3)
    • 5.118 in(5)
    • 5.276 in(2)
    • 5.287 in(1)
    • 5.297 in(2)
    • 5.394 in(1)
    • 5.5 in(2)
    • 5.513 in(2)
    • 5.787 in(1)
    • 5.906 in(1)
    • 6.016 in(1)
    • 6.299 in(9)
    • 6.5 in(1)
    • 6.694 in(9)
    • 7.362 in(1)
    • 8.162 in(1)
    • 8.5 in(1)
    • 9.055 in(1)
    • 9.214 in(1)
    • 9.234 in(2)
    • 9.589 in(1)
    • 11.161 in(1)
    • 12.233 in(2)
    • 13.161 in(1)
    • 14.162 in(1)
    • 14.233 in(2)
    • 15.161 in(1)
    • 15.233 in(2)
    • 16.233 in(2)
    • 19.162 in(1)
    • 20.233 in(2)
    Gage Length
    Gage Length
    • 80 mm(52)
    • 60 mm(38)
    • 100 mm(36)
    • 70 mm(36)
    • 90 mm(30)
    • 65 mm(29)
    • 40 mm(24)
    • 30 mm(21)
    • 45 mm(21)
    • 32 mm(20)
    • 85 mm(20)
    • 120 mm(18)
    • 55 mm(18)
    • 105 mm(16)
    • 50 mm(15)
    • 75 mm(14)
    • 95 mm(14)
    • 25 mm(12)
    • 26 mm(11)
    • 14 mm(9)
    • 16 mm(9)
    • 160 mm(9)
    • 170 mm(9)
    • 28 mm(9)
    • 47 mm(7)
    • 48 mm(6)
    • 109 mm(5)
    • 110 mm(5)
    • 130 mm(5)
    • 115 mm(4)
    • 23 mm(4)
    • 35 mm(4)
    • 38 mm(4)
    • 57 mm(4)
    • 58 mm(4)
    • 59 mm(4)
    • 63 mm(4)
    • 97 mm(4)
    • 125 mm(3)
    • 43 mm(3)
    • 84 mm(3)
    • 114 mm(2)
    • 134 mm(2)
    • 140 mm(2)
    • 20 mm(2)
    • 36 mm(2)
    • 78 mm(2)
    • 127 mm(1)
    • 137 mm(1)
    • 147 mm(1)
    • 150 mm(1)
    • 17 mm(1)
    • 18 mm(1)
    • 187 mm(1)
    • 230 mm(1)
    • 234 mm(1)
    • 42 mm(1)
    • 51 mm(1)
    • 4.801 mm(6)
    • 23.401 mm(2)
    • 28.276 mm(2)
    • 31.451 mm(1)
    • 35.176 mm(2)
    • 35.25 mm(4)
    • 37.6 mm(4)
    • 38.1 mm(1)
    • 38.901 mm(2)
    • 44.95 mm(1)
    • 45.051 mm(1)
    • 46.901 mm(4)
    • 48.25 mm(1)
    • 49.2 mm(2)
    • 50.051 mm(1)
    • 50.301 mm(2)
    • 53.5 mm(4)
    • 55.301 mm(4)
    • 57.151 mm(2)
    • 58.401 mm(1)
    • 58.5 mm(7)
    • 63.5 mm(10)
    • 66.5 mm(4)
    • 70.05 mm(1)
    • 75.05 mm(1)
    • 76.2 mm(3)
    • 77.601 mm(1)
    • 78.7 mm(1)
    • 82.551 mm(2)
    • 85.726 mm(1)
    • 88.9 mm(3)
    • 89.301 mm(1)
    • 95.25 mm(1)
    • 99.551 mm(1)
    • 99.801 mm(1)
    • 99.9 mm(1)
    • 101.601 mm(6)
    • 103.7 mm(1)
    • 104.601 mm(2)
    • 110.9 mm(1)
    • 114.301 mm(4)
    • 115.101 mm(1)
    • 122.4 mm(2)
    • 123.801 mm(2)
    • 134.3 mm(1)
    • 134.55 mm(2)
    • 139.701 mm(2)
    • 152.8 mm(1)
    • 165.101 mm(1)
    • 207.326 mm(1)
    • 215.9 mm(1)
    • 234.55 mm(2)
    • 243.55 mm(1)
    • 283.5 mm(1)
    • 310.701 mm(2)
    • 334.3 mm(1)
    • 359.725 mm(1)
    • 361.526 mm(2)
    • 385.1 mm(1)
    • 386.925 mm(2)
    • 412.326 mm(2)
    • 486.725 mm(1)
    • 513.926 mm(2)
    Front End Size
    Front End Size
    • 0.02 in(1)
    • 0.039 in(1)
    • 0.098 in(1)
    • 0.119 in(1)
    • 0.237 in(18)
    • 0.25 in(3)
    • 0.313 in(3)
    • 0.315 in(18)
    • 0.375 in(12)
    • 0.376 in(1)
    • 0.394 in(20)
    • 0.438 in(1)
    • 0.473 in(29)
    • 0.5 in(19)
    • 0.551 in(10)
    • 0.564 in(1)
    • 0.625 in(15)
    • 0.63 in(36)
    • 0.709 in(9)
    • 0.749 in(2)
    • 0.75 in(27)
    • 0.787 in(40)
    • 0.794 in(1)
    • 0.866 in(9)
    • 0.875 in(1)
    • 0.984 in(28)
    • 1.0 in(28)
    • 1.063 in(11)
    • 1.22 in(1)
    • 1.221 in(2)
    • 1.248 in(2)
    • 1.25 in(23)
    • 1.26 in(48)
    • 1.5 in(17)
    • 1.575 in(36)
    • 1.75 in(1)
    • 1.891 in(1)
    • 1.969 in(15)
    • 2.0 in(13)
    • 2.362 in(2)
    • 2.48 in(10)
    • 2.5 in(6)
    • 3.15 in(4)
    Front End Size MinkomuFront End Size Max
    Front End Size
    Front End Size
    • 0.5 mm(1)
    • 1.0 mm(1)
    • 2.5 mm(1)
    • 3.0 mm(1)
    • 6.0 mm(18)
    • 6.351 mm(3)
    • 7.95 mm(3)
    • 8.0 mm(18)
    • 9.525 mm(12)
    • 9.55 mm(1)
    • 10.0 mm(20)
    • 11.125 mm(1)
    • 12.0 mm(29)
    • 12.701 mm(19)
    • 14.0 mm(10)
    • 14.3 mm(1)
    • 15.875 mm(15)
    • 16.0 mm(36)
    • 18.0 mm(9)
    • 19.026 mm(2)
    • 19.05 mm(27)
    • 20.0 mm(40)
    • 20.175 mm(1)
    • 22.0 mm(9)
    • 22.225 mm(1)
    • 25.0 mm(28)
    • 25.401 mm(28)
    • 27.0 mm(11)
    • 31.0 mm(1)
    • 31.026 mm(2)
    • 31.701 mm(2)
    • 31.75 mm(23)
    • 32.0 mm(48)
    • 38.1 mm(17)
    • 40.0 mm(36)
    • 44.45 mm(1)
    • 48.0 mm(1)
    • 50.0 mm(15)
    • 50.801 mm(13)
    • 60.0 mm(2)
    • 63.0 mm(10)
    • 63.5 mm(6)
    • 80.0 mm(4)
    Front End Size MinkomuFront End Size Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (933)
    • B L (911)
    • C A (758)
    • C N (865)
    • D P (829)
    • H T (1088)
    • H W (1356)
    backEnd
    Connection Type
    Connection Type
    • Cutoff Blade (3)
    • TAPER SHANK (973)
    System Size
    System Size
    • KM12 (36)
    • KM16 (73)
    • KM1612 (1)
    • KM20 (52)
    • KM2016 (17)
    • KM25 (76)
    • KM32 (57)
    • KM3225 (47)
    • KM32TS (24)
    • KM40TS (276)
    • KM50 (11)
    • KM50TS (264)
    • KM63TS (304)
    • KM63UT (1)
    • KM63XMZ (159)
    • KM80 (5)
    • KM80ATC (108)
    • KM80TS (113)
    Back-End Diameter
    Back-End Diameter
    • 10.0 mm(1)
    • 12.0 mm(33)
    • 12.701 mm(2)
    • 14.0 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(72)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(5)
    • 20.0 mm(85)
    • 22.0 mm(1)
    • 24.0 mm(1)
    • 25.0 mm(79)
    • 25.401 mm(3)
    • 31.75 mm(2)
    • 32.0 mm(155)
    • 38.1 mm(8)
    • 40.0 mm(381)
    • 50.0 mm(380)
    • 63.0 mm(611)
    • 80.0 mm(279)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.394 in(1)
    • 0.473 in(33)
    • 0.5 in(2)
    • 0.551 in(1)
    • 0.625 in(2)
    • 0.63 in(72)
    • 0.669 in(1)
    • 0.709 in(1)
    • 0.748 in(1)
    • 0.75 in(5)
    • 0.787 in(85)
    • 0.866 in(1)
    • 0.946 in(1)
    • 0.984 in(79)
    • 1.0 in(3)
    • 1.25 in(2)
    • 1.26 in(155)
    • 1.5 in(8)
    • 1.575 in(381)
    • 1.969 in(380)
    • 2.48 in(611)
    • 3.15 in(279)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.0 in(4)
    • 0.748 in(3)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 0.0 mm(4)
    • 19.0 mm(3)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.072 in(3)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 1.8 mm(3)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    KM63TS™
    (450)

    KM63TS™

    KM50TS™
    (380)

    KM50TS™

    KM40TS™
    (376)

    KM40TS™

    KM™ Mini
    (203)

    KM™ Mini

    KM63XMZ™
    (194)

    KM63XMZ™

    KM Micro™
    (183)

    KM Micro™

    KM80TS™
    (172)

    KM80TS™

    KM80ATC™
    (126)

    KM80ATC™

    KM32TS™
    (112)

    KM32TS™

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk