Vítejte
Potvrďte své předvolby
Aktualizovat předvolby
Návrhy produktů
Product Family suggestions
Kennametal k vašim službám
Zakaznicke centrum
Vítejte, Přihlásit se
Vámi vybraný účet:
Vyskytl se problém s vaším účtem. Kontaktujte prosím zákaznickou podporu.
Účet kupujícího Změnit účet
Účet pro příjemce zásilky Změnit účet
- Spravovat objednávky
- Spravovat kanály
Oznámení
Označit vše jako přečtené- Změnit heslo
- Můj profil
- Odhlásit se
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.
Vnější obrábění
Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
- P Steel (1801)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1790)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1790)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1790)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1790)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1790)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1801)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1801)
- M Stainless Steel (1779)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1779)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1779)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1779)
- K Cast Iron (1895)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1895)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1890)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1853)
- N Non-Ferrous Materials (1772)
- N1Wrought Aluminum (1751)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1751)
- N3High-Silicon Aluminum Alloys Si >12.2%(904)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1772)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1751)
- N6Carbon, Graphite Composites, CFRP (1735)
- N7MMC's (1502)
- S High-Temp Alloys (1869)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1864)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1869)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1864)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1794)
- H Hardened Materials (1722)
- H1Hardened Materials 44-48 HRC(1722)
- H2Hardened Materials 48-55 HRC(1709)
- H3Hardened Materials 56-60 HRC(1495)
- H4Hardened Materials >60 HRC(1150)
- C CFRP Materials (1738)
- C1CFRP, CFRP / CFRP (1722)
- C2CFRP / Aluminium CFRP / Non-Ferrous (1502)
Vybrat první volbu
- CN (113)
- DE (111)
- GB (56)
- IN (2)
- SG (16)
- US (136)
Applications
Applications
Chamfer Turning (49)
Facing (1225)
ID Facing (2)
Multiple Direction Cutting (1288)
Plunge Turning (55)
Profiling (1170)
TRN Boring (339)
Turning (1783)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1846)
- Lightly Interrupted Cut (1889)
- Smooth Cut (1889)
- Varying Depth of Cut (1882)
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (198)
- 48.0 (8)
- 49.783 (2)
- 50.0 (24)
- 60.0 (16)
- 62.5 (27)
- 63.0 (19)
- 72.5 (25)
- 75.0 (293)
- 85.0 (7)
- 90.0 (351)
- 93.0 (448)
- 95.0 (392)
- 97.5 (1)
- 105.0 (1)
- 107.5 (90)
- 117.5 (14)
Tool Cutting Edge Angle MinZadejte hodnotukomuTool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- KM (264)
- Toolholder (1328)
=
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (994)
- 2.0 (1073)
- 3.0 (297)
- 4.0 (1153)
- 6.0 (269)
- 8.0 (643)
Cutting Edges Per Insert MinZadejte hodnotukomuCutting Edges Per Insert MaxCutting Edges Per Insert
=
Over All Length [L]
Over All Length [L]
- 1.379 in(36)
- 1.575 in(108)
- 1.772 in(34)
- 1.85 in(2)
- 1.969 in(150)
- 2.165 in(1)
- 2.362 in(182)
- 2.5 in(22)
- 2.757 in(65)
- 3.15 in(4)
- 3.25 in(1)
- 3.446 in(2)
- 3.5 in(34)
- 3.661 in(2)
- 3.681 in(2)
- 3.74 in(2)
- 3.781 in(2)
- 3.819 in(6)
- 3.858 in(2)
- 3.918 in(2)
- 3.938 in(49)
- 4.0 in(29)
- 4.055 in(2)
- 4.094 in(2)
- 4.134 in(2)
- 4.154 in(2)
- 4.213 in(2)
- 4.252 in(2)
- 4.291 in(8)
- 4.331 in(2)
- 4.5 in(117)
- 4.529 in(10)
- 4.567 in(2)
- 4.764 in(2)
- 4.921 in(107)
- 5.0 in(65)
- 5.571 in(2)
- 5.579 in(2)
- 5.906 in(229)
- 5.955 in(3)
- 6.0 in(393)
- 6.299 in(21)
- 6.367 in(4)
- 6.694 in(130)
- 6.732 in(1)
- 6.742 in(9)
- 6.791 in(2)
- 7.0 in(26)
- 7.875 in(5)
- 8.0 in(10)
- 9.843 in(16)
- 18.0 in(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 35.0 mm(36)
- 40.0 mm(108)
- 45.0 mm(34)
- 47.0 mm(2)
- 50.0 mm(150)
- 55.0 mm(1)
- 60.0 mm(182)
- 63.5 mm(22)
- 70.0 mm(65)
- 80.0 mm(4)
- 82.551 mm(1)
- 87.5 mm(2)
- 88.9 mm(34)
- 93.0 mm(2)
- 93.5 mm(2)
- 95.0 mm(2)
- 96.0 mm(2)
- 97.0 mm(6)
- 98.0 mm(2)
- 99.5 mm(2)
- 100.0 mm(49)
- 101.601 mm(29)
- 103.0 mm(2)
- 104.0 mm(2)
- 105.0 mm(2)
- 105.5 mm(2)
- 107.0 mm(2)
- 108.0 mm(2)
- 109.0 mm(8)
- 110.0 mm(2)
- 114.301 mm(117)
- 115.0 mm(10)
- 116.0 mm(2)
- 121.0 mm(2)
- 125.0 mm(107)
- 127.0 mm(65)
- 141.5 mm(2)
- 141.701 mm(2)
- 150.0 mm(229)
- 151.25 mm(3)
- 152.4 mm(393)
- 160.0 mm(21)
- 161.701 mm(4)
- 170.0 mm(128)
- 170.025 mm(2)
- 171.0 mm(1)
- 171.25 mm(9)
- 172.5 mm(2)
- 177.8 mm(26)
- 200.0 mm(5)
- 203.201 mm(10)
- 250.0 mm(16)
- 457.201 mm(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
cornerConfiguration
≈
Corner Radius
Corner Radius
- 0.0 in(198)
- 0.001 in(198)
- 0.002 in(236)
- 0.004 in(848)
- 0.008 in(880)
- 0.014 in(122)
- 0.016 in(1449)
- 0.024 in(63)
- 0.031 in(1715)
- 0.047 in(1556)
- 0.063 in(1171)
- 0.079 in(7)
- 0.094 in(101)
- 0.095 in(340)
- 0.119 in(1)
- 0.125 in(82)
- 0.126 in(107)
- 0.157 in(66)
- 0.188 in(21)
- 0.197 in(11)
- 0.237 in(11)
- 0.25 in(59)
- 0.313 in(3)
- 0.315 in(5)
- 0.375 in(7)
- 0.394 in(4)
- 0.492 in(6)
- 0.5 in(3)
- 0.63 in(2)
Corner Radius MinZadejte hodnotukomuCorner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.0 mm(198)
- 0.025 mm(198)
- 0.05 mm(236)
- 0.1 mm(848)
- 0.2 mm(880)
- 0.351 mm(122)
- 0.4 mm(1449)
- 0.601 mm(63)
- 0.8 mm(1715)
- 1.201 mm(1556)
- 1.6 mm(1171)
- 2.0 mm(7)
- 2.375 mm(101)
- 2.401 mm(340)
- 3.0 mm(1)
- 3.176 mm(82)
- 3.2 mm(107)
- 4.0 mm(66)
- 4.775 mm(21)
- 5.0 mm(11)
- 6.0 mm(11)
- 6.351 mm(59)
- 7.95 mm(3)
- 8.0 mm(5)
- 9.525 mm(7)
- 10.0 mm(4)
- 12.5 mm(6)
- 12.701 mm(3)
- 16.0 mm(2)
Corner Radius MinZadejte hodnotukomuCorner Radius MaxCorner Radius
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- AC5 (13)
- CW2015 (303)
- CW3020 (15)
- CW5025 (189)
- HCK10 (7)
- K060 (166)
- K090 (207)
- K1 (71)
- K313 (1503)
- K68 (1244)
- KB1340 (389)
- KB1345 (449)
- KB1610 (718)
- KB1630 (543)
- KB5610 (480)
- KB5630 (555)
- KB9640 (36)
- KBH10 (986)
- KBH10B (540)
- KBH20 (1037)
- KBH20B (540)
- KBK35 (78)
- KBK45 (31)
- KC5010 (1734)
- KC5020P (43)
- KC5025 (1488)
- KC5410 (1232)
- KC730 (1337)
- KC850 (1646)
- KC9125 (110)
- KCK05 (1225)
- KCK05B (572)
- KCK15 (1378)
- KCK15B (1452)
- KCK20 (1464)
- KCK20B (1385)
- KCM15 (1334)
- KCM15B (1359)
- KCM25 (1507)
- KCM25B (1518)
- KCM25S (155)
- KCM35 (1342)
- KCM35B (729)
- KCP05 (1060)
- KCP05B (974)
- KCP10 (1571)
- KCP10B (1637)
- KCP15 (38)
- KCP20S (155)
- KCP25 (1627)
- KCP25B (1698)
- KCP25C (1758)
- KCP30 (1515)
- KCP30B (932)
- KCP40 (1024)
- KCP40B (1148)
- KCPK05 (1087)
- KCS10 (579)
- KCS10B (1472)
- KCS25S (155)
- KCU10 (1706)
- KCU10B (1722)
- KCU25 (1542)
- KCU25B (1561)
- KD1400 (717)
- KD1405 (405)
- KD1425 (812)
- KMF (20)
- KN10S (198)
- KS15 (166)
- KT125 (20)
- KT315 (1172)
- KT325 (445)
- KTP10 (1133)
- KTP25S (893)
- KY1540 (241)
- KY1615 (202)
- KY3500 (1113)
- KY4300 (492)
- KY4400 (1068)
- KYHK15B (1142)
- KYK10 (489)
- KYK25 (715)
- KYS25 (364)
- KYS30 (534)
- PB100 (39)
- PB250 (7)
- THM (226)
- THM-X (175)
- THMF-X (112)
- TN10P (338)
- TN10U (246)
- TN15M (215)
- TN15U (189)
- TN2000 (285)
- TN20K (375)
- TN20P (418)
- TN30M (251)
- TN30P (283)
- TN4000 (269)
- TN6010 (116)
- TN6025 (15)
- TTM09 (3)
- TTR (13)
- TTR-X (23)
- TTS (133)
- WBH10P (129)
- WBH10U (41)
- WBH20P (291)
- WBH30P (129)
- WBK40U (51)
- WBK45U (44)
- WDN00U (78)
- WDN25U (177)
- WK05CT (410)
- WK15CT (258)
- WK20CT (455)
- WM15CT (404)
- WM25CT (448)
- WM35CT (361)
- WP05CT (58)
- WP15CT (467)
- WP20TT (13)
- WP25CT (467)
- WP35CT (405)
- WS10PT (410)
- WS25PT (425)
- WU05PT (30)
- WU10HT (414)
- WU10PT (291)
- WU25PT (291)
- X00580 (166)
- X00581 (166)
- X00582 (166)
- X00583 (166)
- X00584 (166)
- X00585 (166)
- X00586 (166)
- X00591 (166)
- X00592 (166)
- X00593 (166)
- X00594 (166)
- X00596 (166)
- X00597 (166)
- X00599 (166)
- YY87EL (20)
Hand Of Tool
Hand Of Tool
- L (639)
- N (209)
- R (744)
Wiper Insert
Wiper Insert
- N (1898)
- Y (601)
=
F Dimension
F Dimension
- 0.0 mm(42)
- 4.0 mm(1)
- 4.75 mm(3)
- 5.0 mm(2)
- 6.0 mm(5)
- 6.351 mm(7)
- 7.926 mm(2)
- 7.95 mm(3)
- 8.0 mm(8)
- 9.425 mm(1)
- 9.525 mm(25)
- 9.951 mm(1)
- 10.0 mm(22)
- 11.0 mm(1)
- 11.125 mm(1)
- 11.15 mm(2)
- 11.675 mm(1)
- 12.0 mm(23)
- 12.226 mm(1)
- 12.25 mm(1)
- 12.5 mm(23)
- 12.601 mm(5)
- 12.625 mm(1)
- 12.701 mm(65)
- 13.0 mm(5)
- 13.65 mm(2)
- 13.75 mm(1)
- 13.775 mm(2)
- 13.925 mm(1)
- 13.951 mm(1)
- 14.0 mm(1)
- 14.275 mm(1)
- 14.425 mm(1)
- 15.0 mm(1)
- 15.5 mm(2)
- 15.775 mm(2)
- 15.8 mm(1)
- 15.875 mm(48)
- 16.0 mm(32)
- 16.5 mm(2)
- 16.825 mm(1)
- 17.0 mm(5)
- 17.026 mm(2)
- 17.1 mm(1)
- 17.25 mm(1)
- 17.475 mm(1)
- 17.5 mm(2)
- 17.776 mm(1)
- 18.5 mm(2)
- 18.95 mm(2)
- 19.05 mm(29)
- 19.075 mm(2)
- 19.175 mm(1)
- 19.5 mm(1)
- 19.675 mm(1)
- 19.701 mm(1)
- 19.875 mm(3)
- 20.0 mm(41)
- 20.175 mm(1)
- 20.5 mm(3)
- 20.651 mm(1)
- 21.026 mm(2)
- 21.076 mm(2)
- 22.0 mm(31)
- 22.225 mm(7)
- 22.3 mm(1)
- 22.35 mm(2)
- 23.151 mm(2)
- 23.175 mm(5)
- 23.701 mm(1)
- 24.0 mm(11)
- 24.25 mm(2)
- 25.0 mm(93)
- 25.201 mm(2)
- 25.401 mm(83)
- 25.5 mm(1)
- 25.901 mm(5)
- 26.0 mm(1)
- 26.425 mm(1)
- 26.625 mm(2)
- 26.925 mm(2)
- 27.0 mm(69)
- 27.375 mm(2)
- 28.026 mm(2)
- 28.576 mm(6)
- 28.651 mm(2)
- 28.701 mm(3)
- 29.725 mm(4)
- 30.0 mm(19)
- 31.75 mm(181)
- 31.776 mm(6)
- 32.0 mm(254)
- 32.25 mm(6)
- 32.275 mm(1)
- 32.5 mm(1)
- 33.551 mm(2)
- 34.375 mm(2)
- 35.0 mm(38)
- 35.25 mm(1)
- 38.0 mm(18)
- 38.1 mm(81)
- 38.125 mm(4)
- 38.375 mm(2)
- 38.6 mm(2)
- 40.0 mm(37)
- 40.5 mm(8)
- 43.0 mm(39)
- 44.95 mm(1)
- 46.25 mm(3)
- 48.0 mm(9)
- 50.0 mm(9)
- 50.801 mm(43)
- 50.825 mm(1)
- 53.0 mm(23)
- 57.151 mm(1)
- 57.651 mm(1)
- 59.0 mm(2)
- 63.5 mm(2)
F Dimension MinZadejte hodnotukomuF Dimension MaxF Dimension
=
F Dimension
F Dimension
- 0.0 in(42)
- 0.157 in(1)
- 0.187 in(3)
- 0.197 in(2)
- 0.237 in(5)
- 0.25 in(7)
- 0.312 in(2)
- 0.313 in(3)
- 0.315 in(8)
- 0.371 in(1)
- 0.375 in(25)
- 0.392 in(1)
- 0.394 in(22)
- 0.433 in(1)
- 0.438 in(1)
- 0.439 in(2)
- 0.46 in(1)
- 0.473 in(23)
- 0.481 in(1)
- 0.482 in(1)
- 0.492 in(23)
- 0.496 in(5)
- 0.497 in(1)
- 0.5 in(65)
- 0.512 in(5)
- 0.537 in(2)
- 0.541 in(1)
- 0.542 in(2)
- 0.548 in(1)
- 0.549 in(1)
- 0.551 in(1)
- 0.562 in(1)
- 0.569 in(1)
- 0.591 in(1)
- 0.61 in(2)
- 0.621 in(2)
- 0.622 in(1)
- 0.625 in(48)
- 0.63 in(32)
- 0.65 in(2)
- 0.662 in(1)
- 0.669 in(5)
- 0.67 in(2)
- 0.673 in(1)
- 0.679 in(1)
- 0.689 in(1)
- 0.69 in(2)
- 0.701 in(1)
- 0.728 in(2)
- 0.746 in(2)
- 0.75 in(29)
- 0.751 in(2)
- 0.755 in(1)
- 0.768 in(1)
- 0.775 in(1)
- 0.776 in(1)
- 0.782 in(3)
- 0.787 in(41)
- 0.794 in(1)
- 0.807 in(3)
- 0.814 in(1)
- 0.829 in(2)
- 0.831 in(2)
- 0.866 in(31)
- 0.875 in(7)
- 0.878 in(1)
- 0.88 in(2)
- 0.911 in(2)
- 0.912 in(5)
- 0.933 in(1)
- 0.946 in(11)
- 0.956 in(2)
- 0.984 in(93)
- 0.992 in(2)
- 1.0 in(83)
- 1.004 in(1)
- 1.02 in(5)
- 1.024 in(1)
- 1.04 in(1)
- 1.048 in(2)
- 1.06 in(2)
- 1.063 in(69)
- 1.078 in(2)
- 1.103 in(2)
- 1.125 in(6)
- 1.129 in(2)
- 1.131 in(3)
- 1.17 in(4)
- 1.181 in(19)
- 1.25 in(181)
- 1.252 in(6)
- 1.26 in(254)
- 1.27 in(6)
- 1.272 in(1)
- 1.28 in(1)
- 1.321 in(2)
- 1.353 in(2)
- 1.379 in(38)
- 1.389 in(1)
- 1.496 in(18)
- 1.5 in(81)
- 1.502 in(4)
- 1.512 in(2)
- 1.52 in(2)
- 1.575 in(37)
- 1.594 in(8)
- 1.693 in(39)
- 1.77 in(1)
- 1.821 in(3)
- 1.891 in(9)
- 1.969 in(9)
- 2.0 in(43)
- 2.001 in(1)
- 2.087 in(23)
- 2.25 in(1)
- 2.27 in(1)
- 2.323 in(2)
- 2.5 in(2)
F Dimension MinZadejte hodnotukomuF Dimension MaxF Dimension
=
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(1)
- 40.0 mm(4)
- 44.0 mm(12)
- 50.0 mm(30)
- 54.0 mm(30)
- 60.0 mm(2)
- 63.0 mm(16)
- 70.0 mm(38)
- 74.0 mm(4)
- 80.0 mm(51)
- 86.0 mm(68)
- 90.0 mm(6)
- 94.0 mm(2)
- 100.0 mm(37)
- 104.0 mm(2)
- 106.0 mm(32)
- 118.0 mm(2)
- 120.0 mm(2)
- 150.0 mm(1)
Minimum Axial Groove Diameter MinZadejte hodnotukomuMinimum Axial Groove Diameter MaxMinimum Axial Groove Diameter
=
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.63 in(1)
- 1.575 in(4)
- 1.732 in(12)
- 1.969 in(30)
- 2.126 in(30)
- 2.362 in(2)
- 2.48 in(16)
- 2.757 in(38)
- 2.914 in(4)
- 3.15 in(51)
- 3.386 in(68)
- 3.543 in(6)
- 3.701 in(2)
- 3.938 in(37)
- 4.094 in(2)
- 4.173 in(32)
- 4.646 in(2)
- 4.724 in(2)
- 5.906 in(1)
Minimum Axial Groove Diameter MinZadejte hodnotukomuMinimum Axial Groove Diameter MaxMinimum Axial Groove Diameter
Cutting Direction
Cutting Direction
- B (378)
- E (203)
- S (1011)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (872)
- DOUBLE POSITIVE (36)
- NEGATIVE-ZERO (156)
- NEUTRAL (ZERO) (397)
- POSITIVE-ZERO (65)
=
Maximum Bore Depth
Maximum Bore Depth
- 1.379 in(20)
- 1.575 in(63)
- 1.772 in(16)
- 1.891 in(1)
- 1.969 in(88)
- 2.165 in(1)
- 2.362 in(103)
- 2.757 in(40)
- 4.529 in(8)
Maximum Bore Depth MinZadejte hodnotukomuMaximum Bore Depth MaxMaximum Bore Depth
=
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(20)
- 40.0 mm(63)
- 45.0 mm(16)
- 48.0 mm(1)
- 50.0 mm(88)
- 55.0 mm(1)
- 60.0 mm(103)
- 70.0 mm(40)
- 115.0 mm(8)
Maximum Bore Depth MinZadejte hodnotukomuMaximum Bore Depth MaxMaximum Bore Depth
Boring Bar Material
Boring Bar Material
- S (13)
frontEnd
Clamp Style
Clamp Style
- C (166)
- D (270)
- M (710)
- N (35)
- P (304)
- S (408)
- W (8)
- X (15)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (497)
- D-DIAMOND/RHOMBIC 55 (385)
- E-DIAMOND/RHOMBIC 75 (1)
- R-ROUND (161)
- S-SQUARE 90 (321)
- T-TRIANGLE 60 (260)
- V-DIAMOND/RHOMBIC 35 (192)
- W-TRIGON 80 (99)
=
Maximum Cutting Depth
Maximum Cutting Depth
- 0.25 in(3)
- 0.276 in(3)
- 0.309 in(2)
- 0.315 in(2)
- 0.4 in(2)
- 0.411 in(1)
- 0.43 in(2)
- 0.465 in(2)
- 0.473 in(1)
- 0.478 in(2)
- 0.501 in(2)
- 0.625 in(1)
- 0.63 in(5)
- 0.748 in(1)
- 0.75 in(4)
- 0.787 in(4)
- 0.81 in(3)
- 0.946 in(2)
- 0.984 in(4)
- 1.0 in(15)
- 1.02 in(4)
- 1.131 in(1)
- 1.143 in(1)
- 1.25 in(3)
- 1.26 in(1)
- 1.299 in(2)
- 1.381 in(5)
- 1.496 in(2)
- 1.5 in(4)
- 1.581 in(2)
- 1.863 in(1)
- 1.875 in(2)
- 2.323 in(1)
- 2.364 in(1)
- 2.374 in(1)
- 3.071 in(1)
Maximum Cutting Depth MinZadejte hodnotukomuMaximum Cutting Depth MaxMaximum Cutting Depth
=
Maximum Cutting Depth
Maximum Cutting Depth
- 6.351 mm(3)
- 7.0 mm(3)
- 7.851 mm(2)
- 8.0 mm(2)
- 10.15 mm(2)
- 10.425 mm(1)
- 10.925 mm(2)
- 11.8 mm(2)
- 12.0 mm(1)
- 12.125 mm(2)
- 12.726 mm(2)
- 15.875 mm(1)
- 16.0 mm(5)
- 19.0 mm(1)
- 19.05 mm(4)
- 20.0 mm(4)
- 20.576 mm(3)
- 24.0 mm(2)
- 25.0 mm(4)
- 25.401 mm(15)
- 25.901 mm(4)
- 28.701 mm(1)
- 29.0 mm(1)
- 31.75 mm(3)
- 32.0 mm(1)
- 33.0 mm(2)
- 35.051 mm(5)
- 38.0 mm(2)
- 38.1 mm(4)
- 40.151 mm(2)
- 47.325 mm(1)
- 47.625 mm(2)
- 59.0 mm(1)
- 60.051 mm(1)
- 60.301 mm(1)
- 78.0 mm(1)
Maximum Cutting Depth MinZadejte hodnotukomuMaximum Cutting Depth MaxMaximum Cutting Depth
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (1003)
- B L (1037)
- C A (1223)
- C N (1153)
- D P (954)
- H T (1192)
- H W (1842)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (1328)
- TAPER SHANK (264)
System Size
System Size
- KM32 (15)
- KM32TS (6)
- KM40TS (67)
- KM50TS (57)
- KM63TS (79)
- KM63UT (1)
- KM80TS (39)
=
Back-End Diameter
Back-End Diameter
- 12.0 mm(1)
- 32.0 mm(41)
- 40.0 mm(146)
- 50.0 mm(148)
- 63.0 mm(186)
- 80.0 mm(67)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.473 in(1)
- 1.26 in(41)
- 1.575 in(146)
- 1.969 in(148)
- 2.48 in(186)
- 3.15 in(67)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
=
Shank Height
Shank Height
- 0.313 in(2)
- 0.315 in(1)
- 0.375 in(34)
- 0.394 in(10)
- 0.473 in(36)
- 0.5 in(72)
- 0.625 in(43)
- 0.63 in(57)
- 0.75 in(99)
- 0.787 in(123)
- 0.984 in(236)
- 1.0 in(244)
- 1.25 in(140)
- 1.26 in(146)
- 1.5 in(61)
- 1.575 in(21)
- 2.0 in(3)
Shank Height MinZadejte hodnotukomuShank Height MaxShank Height
=
Shank Height
Shank Height
- 7.95 mm(2)
- 8.0 mm(1)
- 9.525 mm(34)
- 10.0 mm(10)
- 12.0 mm(36)
- 12.701 mm(72)
- 15.875 mm(43)
- 16.0 mm(57)
- 19.05 mm(99)
- 20.0 mm(123)
- 25.0 mm(236)
- 25.401 mm(244)
- 31.75 mm(140)
- 32.0 mm(146)
- 38.1 mm(61)
- 40.0 mm(21)
- 50.801 mm(3)
Shank Height MinZadejte hodnotukomuShank Height MaxShank Height
=
Shank Width
Shank Width
- 0.313 in(2)
- 0.315 in(1)
- 0.375 in(34)
- 0.394 in(11)
- 0.473 in(36)
- 0.5 in(73)
- 0.551 in(1)
- 0.625 in(44)
- 0.63 in(57)
- 0.709 in(1)
- 0.75 in(102)
- 0.787 in(122)
- 0.984 in(317)
- 1.0 in(260)
- 1.25 in(122)
- 1.26 in(65)
- 1.5 in(58)
- 1.575 in(19)
- 2.0 in(3)
Shank Width MinZadejte hodnotukomuShank Width MaxShank Width
=
Shank Width
Shank Width
- 7.95 mm(2)
- 8.0 mm(1)
- 9.525 mm(34)
- 10.0 mm(11)
- 12.0 mm(36)
- 12.701 mm(73)
- 14.0 mm(1)
- 15.875 mm(44)
- 16.0 mm(57)
- 18.0 mm(1)
- 19.05 mm(102)
- 20.0 mm(122)
- 25.0 mm(317)
- 25.401 mm(260)
- 31.75 mm(122)
- 32.0 mm(65)
- 38.1 mm(58)
- 40.0 mm(19)
- 50.801 mm(3)
Shank Width MinZadejte hodnotukomuShank Width MaxShank Width
No filters matching ""
