Produkt podobný k:
DUO-LOCK™ • HARVI™ II • Chamfered • 5 Flutes • Inch
HARVI II • UCDV • Unequal Flute Spacing
Objednací číslo6072207
ISO katalogové IDUCDV0625Y5CVANSI katalogové IDUCDV0625Y5CV
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
- H Hardened Materials
- Corner Style: Corner Chamfer
- Helix Angle: 37°/39°
- Plunge Milling
- Ramping: Blank
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
- Tool Dimensions: Flute Configuration: 5
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Objednací číslo | 6072207 |
ISO katalogové ID | UCDV0625Y5CV |
ANSI katalogové ID | UCDV0625Y5CV |
Grade | KCPM15 |
Adapter Style Machine Side | DUO-LOCK |
[D] Adapter / Shank / Bore Diameter | 15.875 mm |
[D] Adapter / Shank / Bore Diameter | .625 in |
[AP1MAX] 1st Maximum Cutting Depth | 23.813 mm |
[AP1MAX] 1st Maximum Cutting Depth | .9375 in |
[L1] Gage Length | 35.7 mm |
[L1] Gage Length | 1.405 in |
[CSMS] System Size Machine Side | DL16 |
[WF] Width of Flat | 13 mm |
[WF] Width of Flat | .5118 in |
[BCH] Corner Chamfer Width | 0.508 mm |
[BCH] Corner Chamfer Width | .02 in |
[Z] Number of Flutes | 5 |
[D1] Effective Cutting Diameter | 15.875 mm |
[D1] Effective Cutting Diameter | .625 in |
Materiály obrobků
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
- Hardened Materials
Použití
- Corner Style: Corner Chamfer
- Helix Angle: 37°/39°
- Plunge Milling
- Ramping: Blank
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
- Tool Dimensions: Flute Configuration: 5
Karbidy
KCPM15
Coated carbide grade with thick PVD coating and optimized chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
Vlastnosti a výhody
- Unequal flute spacing and variable helix configuration minimize chatter and harmonics for smoother machining.
- Non-center cutting.
- Ramping up to 3°.
- Five-flute geometry able to slot up to 1 x D.
- Single tool for both roughing and finishing, reducing setups.
- Standard items listed. Additional styles and coatings made-to-order.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
Tolerance
Tolerance stopkových fréz | |
D1 | tolerance e8 |
13/32 | -0,00126"/-0,00232" |
23/32 | -0,00157"/-0,00287" |
-0,00197''/-0,00350'' |
Řezné podmínky
HARVI II • UCDV • Unequal Flute Spacing
Boční frézování (A) | krátké | střední | dlouhé | Doporučený posuv na zub (IPT = palce/zub) při bočním frézování (A). Při drážkování (B) snižte posuv na zub IPT o 20%. | ||||||||||||||||
A | B | s adaptérem | Průměr D1 | |||||||||||||||||
KCPM15 | KCPM15 | KCPM15 | ||||||||||||||||||
Řezná rychlost | Řezná rychlost | Řezná rychlost | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
Materiálová skupina | ap | ae | ap | Min | Max | Min | Max | Min | Max | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | 1.2500 | ||||
P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | 441 | – | 594 | 441 | – | 594 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | 414 | – | 558 | 414 | – | 558 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | 351 | – | 468 | 351 | – | 468 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 | |
4 | 1.5 x D | 0.4 x D | 0.75 x D | 300 | – | 490 | 270 | – | 441 | 270 | – | 441 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 | |
5 | 1.5 x D | 0.4 x D | 1 x D | 200 | – | 330 | 170 | – | 280.5 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
6 | 1.5 x D | 0.4 x D | 0.75 x D | 160 | – | 250 | 136 | – | 212.5 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
M | 1 | 1.5 x D | 0.4 x D | 1 x D | 300 | – | 380 | 240 | – | 304 | 210 | – | 266 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
2 | 1.5 x D | 0.4 x D | 1 x D | 200 | – | 260 | 160 | – | 208 | 140 | – | 182 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
3 | 1.5 x D | 0.4 x D | 1 x D | 200 | – | 230 | 160 | – | 184 | 140 | – | 161 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 490 | 351 | – | 441 | 351 | – | 441 | IPT | .0023 | .0029 | .0034 | .0037 | .0042 | .0042 |
2 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 460 | 324 | – | 414 | 324 | – | 414 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 430 | 324 | – | 387 | 324 | – | 387 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 | |
S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
3 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
4 | 1.5 x D | 0.4 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0030 | .0030 | |
H | 1 | 1.5 x D | 0.4 x D | 0.75 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 |
2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use