Produkt podobný k:
KenCut™ AQ • ALSB • Radiused • 4-5 Flutes • Internal Coolant • Plain Shank • Inch
PCD End Mill for Roughing and Finishing of Aluminum
Objednací číslo6752767
ISO katalogové IDALSB5RA2000N063HAR015IANSI katalogové IDALSB5RA2000N063HAR015I
- N Non-Ferrous
- Trochoidal Milling
- Slotting: Square End
- Face Milling
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
- Side Milling/Shoulder Milling: Roughing
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Objednací číslo | 6752767 |
ISO katalogové ID | ALSB5RA2000N063HAR015I |
ANSI katalogové ID | ALSB5RA2000N063HAR015I |
Grade | KD1410 |
[L] Overall Length | 101.6 mm |
[L] Overall Length | 4 in |
[LS] Shank Length | 56.5 mm |
[LS] Shank Length | 2.224 in |
[Re] Corner Radius | 0.381 mm |
[Re] Corner Radius | .015 in |
[Z] Number of Flutes | 5 |
[D1] Effective Cutting Diameter | 50.8 mm |
[D1] Effective Cutting Diameter | 2 in |
[D] Adapter / Shank / Bore Diameter | 31.75 mm |
[D] Adapter / Shank / Bore Diameter | 1.25 in |
[AP1MAX] 1st Maximum Cutting Depth | 15.875 mm |
[AP1MAX] 1st Maximum Cutting Depth | .625 in |
Materiály obrobků
- Non-Ferrous
Použití
- Trochoidal Milling
- Slotting: Square End
- Face Milling
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
- Side Milling/Shoulder Milling: Roughing
Karbidy
KD1410
A PCD-tip brazed to carbide for machining aluminum with a very high silicon content, abrasive non-ferrous materials, and fiber-reinforced plastics. KD1410 can be used at very high cutting speeds, even where good surface finishes are required. This grade can be used both wet or dry but is suggested to use coolant where good surface finishes are required.
Vlastnosti a výhody
- End mills with polycrystalline diamond (PCD) for high-speed aluminum machining, reducing maching time drastically.
- PCD end mills provide up to ten times higher productivity compared to solid carbide end mills.
- Minimum quantity lubrication ready (MQL Ready).
- Sharp cutting edges and low friction rake surfaces guarantee high quality surface finishes.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use