Face Milling
Helical Milling
Plunge Milling
Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Shank - Cylindrical Plain
Milling - Through Coolant
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 4109594 |
| ISO katalogové ID | KF2X150W0903C125L600 |
| ANSI katalogové ID | KF2X150W0903C125L600 |
| [D1MAX] Maximum Cutting Diameter | 38.1 mm |
| [D1MAX] Maximum Cutting Diameter | 1.5 in |
| [D1] Effective Cutting Diameter | 22.06 mm |
| [D1] Effective Cutting Diameter | .869 in |
| [D] Adapter / Shank / Bore Diameter | 31.75 mm |
| [D] Adapter / Shank / Bore Diameter | 1.25 in |
| [L] Overall Length | 152.4 mm |
| [L] Overall Length | 6 in |
| [LBX] Body Length Maximum | 42.9 mm |
| [LBX] Body Length Maximum | 1.691 in |
| [AP1MAX] 1st Maximum Cutting Depth | 1.5 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .059 in |
| Number of Inserts | 3 |
| Max RPM | 27400 |
| Gage Insert | WOEJ090512__ |
| Weight Pounds | 1.94 |
Face MillingHelical MillingPlunge MillingRamping: BlankSlotting: Ball NoseSide Milling/Shoulder Milling: Ball Nose3D ProfilingShank - Cylindrical PlainMilling - Through CoolantPocketingVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| (Lehká geometrie) | (Silná geometrie) | |||||
| Odolnost proti opotřebení |  | Houževnatost | ||||
| Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta | |
| P1–P2 | .S..GD | KCPK30 | .S..GD | KCPM40 | .S..HD | KCPM40 |
| P3–P4 | .S..GD | KCPK30 | .S..GD | KCPM40 | .S..HD | KCPM40 |
| P5–P6 | .S..GD | KCPK30 | .S..GD | KC725M | .S..HD | KC725M |
| M1–M2 | .S..GD | KC522M | .S..GD | KC725M | .S..HD | KC725M |
| M3 | .S..GD | KCPK30 | .S..GD | KCPM40 | .S..HD | KCPM40 |
| K1–K2 | .S..HD | KCK15 | .S..HD | KCK15 | .S..HD | KCK15 |
| K3 | .S..GD | KCPK30 | .S..HD | KCK15 | .S..HD | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .S..GD | KC522M | .S..GD | KC725M | .S..HD | KC725M |
| S3 | .S..GD | KC725M | .S..GD | KCPM40 | .S..HD | KCPM40 |
| S4 | .S..GD | KC522M | .S..HD | KC522M | .S..HD | KC725M |
| H1 | – | – | – | – | – | – |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..GD | .045 | .089 | .141 | .032 | .063 | .098 | .024 | .047 | .072 | .021 | .040 | .063 | .019 | .037 | .057 | .S..GD |
| .S..HD | .045 | .109 | .168 | .032 | .077 | .116 | .024 | .057 | .085 | .021 | .049 | .074 | .019 | .045 | .067 | .S..HD |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Materiálová skupina | KC522M | KC725M | KCK15 | KCPK30 | |||||||||
| P | 1 | 1300 | 1130 | 1060 | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
| 2 | 1080 | 950 | 790 | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
| 3 | 1000 | 840 | 700 | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
| 4 | 890 | 730 | 590 | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
| 5 | 730 | 660 | 590 | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
| 6 | 650 | 490 | 400 | 520 | 400 | 310 | – | – | – | 620 | 540 | – | |
| M | 1 | 800 | 710 | 650 | 670 | 590 | 540 | – | – | – | 820 | 720 | 620 |
| 2 | 730 | 620 | 520 | 610 | 520 | 430 | – | – | – | 730 | 640 | 550 | |
| 3 | 550 | 480 | 370 | 460 | 400 | 310 | – | – | – | 570 | 520 | 460 | |
| K | 1 | 900 | 820 | 720 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
| 2 | 710 | 640 | 590 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
| 3 | 590 | 530 | 480 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | 470 | 360 | 280 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| typ frézy | Katalogové číslo | doporučený úhel sestupu (pro plynulé sestupování) | max úhel sestupu při Ap max (nelze pro plynulé sestupování) | max úhel sestupu pro 360° helikální interpolaci | Minimální průměr otvoru (DH min) | Maximální průměr otvoru při plochém dně (DH1 max) | Maximální průměr otvoru (není ploché dno) |
| Adaptéry pro šroubem | KF2X100W0902M12L138 | 3,5° | 5,2° | 3,1° | 1.291 | 1,35 | 2,0 |
| KF2X125W0902M16L169 | 1,9° | 2,8° | 1,7° | 1,813 | 1,87 | 2,5 | |
| KF2X125W0903M16L169 | 1,9° | 2,8° | 1,7° | 1,813 | 1,87 | 2,5 | |
| KF2X150W0903M16L169 | 1,4° | 2.1° | 1,2° | 2,310 | 2,37 | 3,0 | |
| KF2X150W0904M16L169 | 1,4° | 2.1° | 1,2° | 2,310 | 2,37 | 3,0 | |
| Stopkové frézy | KF2X100W0902C100L600 | 3,5° | 5,2° | 3,1° | 1.291 | 1,35 | 2,0 |
| KF2X100W0902C100L800 | 3,5° | 5,2° | 3,1° | 1.291 | 1,35 | 2,0 | |
| KF2X125W0903C125L600 | 1,9° | 2,8° | 1,7° | 1,813 | 1,87 | 2,5 | |
| KF2X125W0903C125L800 | 1,9° | 2,8° | 1,7° | 1,813 | 1,87 | 2,5 | |
| KF2X150W0903C125L600 | 1,4° | 2.1° | 1,2° | 2,310 | 2,37 | 3,0 | |
| KF2X150W0903C125L800 | 1,4° | 2.1° | 1,2° | 2,310 | 2,37 | 3,0 | |
| Čelní frézy | KF2X150W0904S050L157 | 1,4° | 2.1° | 1,2° | 2,310 | 2,37 | 3,0 |
| KF2X200W0905S075L157 | 1,0° | 1,4° | 0,8° | 3,307 | 3,37 | 4,0 | |
| KF2X200W0906S075L157 | 1,0° | 1,4° | 0,8° | 3,307 | 3,37 | 4,0 | |
| KF2X250W0906S075L175 | 0,7° | 1,1° | 0,6° | 4,305 | 4,36 | 5,0 | |
| KF2X300W0907S100L175 | 0,6° | 1,0° | 0,5° | 5,303 | 5.36 | 6,0 | |
| KF2X300W0907S125L200 | 0,6° | 1,0° | 0,5° | 5,303 | 5.36 | 6,0 |
| Rt | Wt | t |
| 0,110 | 0,312 | 0,045 |
| typ frézy | Katalogové číslo | doporučený úhel sestupu (pro plynulé sestupování) | max úhel sestupu při Ap max (nelze pro plynulé sestupování) | max úhel sestupu pro 360° helikální interpolaci | Minimální průměr otvoru (DH min) | Maximální průměr otvoru při plochém dně (DH1 max) | Maximální průměr otvoru (není ploché dno) |
| Screw-On | KF2X2X25Z02M12WO09 | 3.6° | 5.4° | 3.1° | 26,5 | 33,7 | 50 |
| KF2X32Z03M16WO09 | 1.8° | 2.7° | 1.7° | 41,2 | 48,4 | 64 | |
| KF2X35Z03M16WO09 | 1.6° | 2.4° | 1.4° | 46,8 | 54,0 | 70 | |
| KF2X42Z04M16WO09 | 1.2° | 1.9° | 0.8° | 68,7 | 75,9 | 84 | |
| End Mills | KF2X25Z02A25WO09L140 | 3.6° | 5.4° | 3.1° | 26,5 | 33,7 | 50 |
| KF2X25Z02A25WO09L200 | 3.6° | 5.4° | 3.1° | 26,5 | 33,7 | 50 | |
| KF2X25Z02A25WO09L300 | 3.6° | 5.4° | 3.1° | 26,5 | 33,7 | 50 | |
| KF2X28Z02A25WO09L200 | 3.1° | 4.6° | 2.5° | 31,6 | 38,8 | 56 | |
| KF2X32Z03A32WO09L150 | 1.8° | 2.7° | 1.7° | 41,2 | 48,4 | 64 | |
| KF2X32Z03A32WO09L200 | 1.8° | 2.7° | 1.7° | 41,2 | 48,4 | 64 | |
| KF2X32Z03A32WO09L300 | 1.8° | 2.7° | 1.7° | 41,2 | 48,4 | 64 | |
| KF2X35Z03A32WO09L200 | 1.6° | 2.4° | 1.4° | 46,8 | 54,0 | 70 | |
| Face Mills | KF2X40Z04WO09 | 1.3° | 2.0° | 1.2° | 56,4 | 63,6 | 80 |
| KF2X50Z05WO09 | 1.0° | 1.5° | 0.8° | 76,7 | 83,9 | 100 | |
| KF2X52Z05WO09 | 1.0° | 1.4° | 0.8° | 80,7 | 87,9 | 104 | |
| KF2X63Z05S22WO09 | 0.8° | 1.2° | 0.6° | 102,7 | 109,9 | 126 | |
| KF2X63Z05WO09 | 0.8° | 1.2° | 0.6° | 102,7 | 109,9 | 126 | |
| KF2X66Z06S22WO09 | 0.7° | 1.1° | 0.5° | 108,7 | 115,9 | 132 | |
| KF2X66Z06WO09 | 0.7° | 1.1° | 0.5° | 108,7 | 115,9 | 132 | |
| KF2X80Z07WO09 | 0.6° | 0.9° | 0.4° | 136,6 | 143,8 | 160 |
| Průměr | max. sestupný úhel | max úhel sestupu pro 360° helikální interpolaci | max hloubka zapichování | Minimální průměr otvoru (DH min) | Maximální průměr otvoru při plochém dně (DH1 max) | Maximální průměr otvoru (není ploché dno) |
| 1.50 | 5.5° | 1.93° | 0.076 | 1.90 | 2.22 | 3.00 |
| 2.00 | 4.4° | 1.18° | 0.076 | 2.86 | 3.22 | 4.00 |
| 2.50 | 3.0° | 0.85° | 0.076 | 3.85 | 4.22 | 5.00 |
| 3.00 | 2.3° | 0.67° | 0.076 | 4.84 | 5.21 | 6.00 |
| 4.00 | 1.6° | 0.47° | 0.076 | 6.84 | 7.21 | 8.00 |
| 5.00 | 1.2° | 0.36° | 0.076 | 8.84 | 9.21 | 10.00 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?