Helix Angle: 37°/39°
Ramping: 3°
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 5
Corner Style: Corner RadiusDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 6072260 |
| ISO Catalog ID | UDDV1000Y5CQC |
| ANSI Catalog ID | UDDV1000Y5CQC |
| Grade | KC643M |
| Adapter Style Machine Side | DUO-LOCK |
| [D] Adapter / Shank / Bore Diameter | 24.4 mm |
| [D] Adapter / Shank / Bore Diameter | .9606 in |
| [AP1MAX] 1st Maximum Cutting Depth | 38.1 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 1.5 in |
| [L1] Gage Length | 57.2 mm |
| [L1] Gage Length | 2.252 in |
| [CSMS] System Size Machine Side | DL25 |
| [WF] Width of Flat | 21 mm |
| [WF] Width of Flat | .8268 in |
| [Re] Corner Radius | 1.524 mm |
| [Re] Corner Radius | .06 in |
| [Z] Number of Flutes | 5 |
| [D1] Effective Cutting Diameter | 25.4 mm |
| [D1] Effective Cutting Diameter | 1 in |
Helix Angle: 37°/39°Ramping: 3°Slotting: Square EndSide Milling/Shoulder Milling: Square EndTool Dimensions: Flute Configuration: 5Corner Style: Corner RadiusGrades
KC643M
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| End Mill Tolerances | |
| D1 | tolerance e8 |
| 13/32 | -0,00126"/-0,00232" |
| 23/32 | -0,00157"/-0,00287" |
| -0,00197''/-0,00350'' | |
 |  |  | ||||||||||||||||||
| Side Milling (A) and Slotting (B) | short | medium | long | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||
| A | B | adapter reach | D1 | |||||||||||||||||
| KC643M | KC643M | KC643M | ||||||||||||||||||
| Cutting Speed | Cutting Speed | Cutting Speed | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |||||||||||
| Material | ap | ae | ap | Min | Max | Min | Max | Min | Max | dec. | .3750 | .5000 | .6250 | .7500 | 1.2500 | 1.2500 | ||||
| P | 5 | 1.5 x D | 0.4 x D | 1 x D | 200 | – | 330 | 170 | – | 280.5 | 160 | – | 264 | IPT | .0016 | .0020 | .0023 | .0026 | .0033 | .0033 |
| 6 | 1.5 x D | 0.4 x D | 0.75 x D | 160 | – | 250 | 136 | – | 212.5 | 128 | – | 200 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | 128 | – | 240 | 96 | – | 180 | IPT | .0019 | .0025 | .0029 | .0033 | .0041 | .0041 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
| 3 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | 64 | – | 104 | 48 | – | 78 | IPT | .0010 | .0013 | .0015 | .0018 | .0022 | .0022 | |
| 4 | 1.5 x D | 0.4 x D | 1 x D | 160 | – | 200 | 128 | – | 160 | 96 | – | 120 | IPT | .0014 | .0018 | .0021 | .0024 | .0030 | .0030 | |
| H | 1 | 1.5 x D | 0.4 x D | 0.75 x D | 260 | – | 460 | 208 | – | 368 | 156 | – | 276 | IPT | .0017 | .0022 | .0026 | .0029 | .0034 | .0034 |
| 2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | 184 | – | 312 | 138 | – | 234 | IPT | .0013 | .0016 | .0019 | .0021 | .0024 | .0024 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?