Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip daha az ödeyerek, üretim hacminizi yukarıda tutun! Şimdi Satın Alın

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Exit Search Back to Solution

Editing Solution

Adding Solution

Solution Name:{{SolutionName}}

    Benzer Ürün:

    Geri Dön | Benzer Değişiklik

    DFT 2.5xD Flanşlı Şaft (Sağ)

    Matkap FIX DFT Cisimleri

    Ürün Numarası100002279

    DFT 2.5xD Flanşlı Şaft (Sağ)
    DFT 2.5xD Flanşlı Şaft (Sağ)
    DFT 2.5xD Flanşlı Şaft (Sağ)
    Open expanded view
    DFT 2.5xD Flanşlı Şaft (Sağ)
    DFT 2.5xD Flanşlı Şaft (Sağ)
    Genel gösterim
    Tüm fiyatlandırma seçeneklerinizi keşfetmek için satış ekibimizle iletişime geçin

    Özellikler ve avantajlar

    • Drill Fix DFT is one of the most versatile and reliable tool solutions covering a large diameter range and offers portfolio of insert geometries and grades
    • Trigon shaped inserts are used for both inboard and outboard inserts and offer the highest centering capabilities and three cutting edges each
    • Drill shipped with insert screws, side pipe plug and Torx wrench
    • DrillingDrilling
    • Drilling: Inclined EntryDrilling: Inclined Entry
    • Drilling: Inclined ExitDrilling: Inclined Exit
    • Drilling: X-OffsetDrilling: X-Offset
    • Drilling: ConvexDrilling: Convex
    • Shank - Cylindrical with Flat and FlangeShank - Cylindrical with Flat and Flange
    • Through Coolant: Radial: Indexable DrillingThrough Coolant: Radial: Indexable Drilling
    • Drilling: BlindDrilling: Blind
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    UYARI • Drill Fix DFR

    UYARI Delme işlemleri sırasında, matkap iş parçasını delip geçtiğinde işlenmemiş bir metal parçası veya delik sonunda pul oluşur. Matkap sabitken ve iş parçası dönerken bu parçalar merkezkaç kuvvetiyle takım tutucudan fırlayabilir. Çevredeki kişileri korumak üzere yeterli önlemlerin alınması gereklidir.
    product data image 42415
    DLSCFCSboru tıpası
    0.7502.001/8-27 NPTR 1/8-27 NPT1025612
    1.0003.001/8-27 NPTR 1/4-18 NPT1025612
    1.2503.251/8-27 NPTR 1/4-18 NPT1025612
    1.5003.751/8-27 NPTR 1/4-18 NPT1025612
    2.0004.001/8-27 NPTR 1/4-18 NPT1025612
    İnç
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteKesme hızı vcÇap başına önerilen ilerleme oranı (f)
    Aralık SFM
    Min.Başlangıç değeriMaks.ØDFT03... .625" – .969"DFT05... .984" – 1.250"DFT06... 1.313" – 1.563"DFT07... 1.625" – 1.875"DFT09... 1.938" – 2.125"DFT011... 2.750" – 3.250"
    P1SOMDKCU25101710661181IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IMDKC7140
    UOMDKCU25656705754IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IMDKC7140
    IOMDKCU40426443492IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IMDKC7140
    2SOHPKCPK10101710661181IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    UOHPKCU25656705754IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    IOHPKCU40426443492IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    3SOHPKCPK108539351050IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    UOHPKCU25590640722IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    IOHPKCU40361394459IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    4SOHPKCU25722820984IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    UOHPKCU40492590722IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    IOHPKC7140295361459IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    5SOHPKCU25590656722IPR.002 – .004.003 – .005.004 – .006.004 – .007.005 – .009.005 – .009
    IHPKC7140
    UOHPKCU40394443492IPR.002 – .004.003 – .005.004 – .006.004 – .007.005 – .009.005 – .009
    IHPKC7140
    IOHPKC7140230279328IPR.002 – .004.003 – .005.004 – .006.004 – .007.005 – .009.005 – .009
    IHPKC7140
    6SOHPKCU25590656722IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    UOHPKCU40394443492IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    IOHPKC7140230279328IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .012
    IHPKC7140
    İnç
    Kesme hızı vc
    Aralık SFMÇap başına önerilen ilerleme oranı (f)
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteMin.Başlangıç değeriMaks.ØDFT03... .625"–.969"DFT05... .984"–1.250"DFT06... 1.313"–1.563"DFT07... 1.625"–1.875"DFT09... 1.938"–2.125"DFT011... 2.750"–3.250"
    P1SOMDKCU25101710661181IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    1SIMDKC7140101710661181IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    1UOMDKCU25656705754IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    1UIMDKC7140656705754IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    1IOMDKCU40426443492IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    1IIMDKC7140426443492IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    2SOHPKCPK10101710661181IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    2SIHPKC7140101710661181IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    2UOHPKCU25656705754IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    2UIHPKC7140656705754IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    2IOHPKCU40426443492IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    2IIHPKC7140426443492IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    3SOHPKCPK108539351050IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    3SIHPKC71408539351050IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    3UOHPKCU25590640722IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    3UIHPKC7140590640722IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    3IOHPKCU40361394459IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    3IIHPKC7140361394459IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    4SOHPKCU25722820984IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    4SIHPKC7140722820984IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    4UOHPKCU40492590722IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    4UIHPKC7140492590722IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    4IOHPKC7140295361459IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    4IIHPKC7140295361459IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    5SOHPKCU25590656722IPR.002–.004.003–.005.004–.006.004–.007.005–.009.005–.009
    5SIHPKC7140590656722IPR.002–.004.003–.005.004–.006.004–.007.005–.009.005–.009
    5UOHPKCU40394443492IPR.002–.004.003–.005.004–.006.004–.007.005–.009.005–.009
    5UIHPKC7140394443492IPR.002–.004.003–.005.004–.006.004–.007.005–.009.005–.009
    5IOHPKC7140230279328IPR.002–.004.003–.005.004–.006.004–.007.005–.009.005–.009
    5IIHPKC7140230279328IPR.002–.004.003–.005.004–.006.004–.007.005–.009.005–.009
    6SOHPKCU25590656722IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    6SIHPKC7140590656722IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    6UOHPKCU40394443492IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    6UIHPKC7140394443492IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    6IOHPKC7140230279328IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    6IIHPKC7140230279328IPR.002–.004.004–.006.004–.007.006–.010.007–.012.007–.012
    İnç
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteKesme hızı vcÇap başına önerilen ilerleme oranı (f)
    Aralık SFM
    Min.Başlangıç değeriMaks.Çapa Göre Tavsiye Edilen İlerleme Oranı (f)
    GrupKoşulmin.Başlama Değerimaks.ØDFT03... .625" – .969"DFT05... .984" – 1.250"DFT06... 1.313" – 1.563"DFT07... 1.625" – 1.875"DFT09... 1.938" – 2.125"
    SOMD
    1SIMDKC7140101710661181IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    UOMD
    1UIMDKC7140656705754IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    IOMD
    1IIMDKC7140426443492IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    SOHP
    2SIHPKC7140101710661181IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    UOHP
    2UIHPKC7140656705754IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    IOHP
    2IIHPKC7140426443492IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    SOHP
    3SIHPKC71408539351050IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    UOHP
    3UIHPKC7140590640722IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    IOHP
    İnç
    Kesme hızı vc
    Aralık SFMÇap başına önerilen ilerleme oranı (f)
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteMin.Başlangıç değeriMaks.ØDFT03... .625"–.969"DFT05... .984"–1.250"DFT06... 1.313"–1.563"DFT07... 1.625"–1.875"DFT09... 1.938"–2.125"DFT011... 2.750"–3.250"
    M1SOMDKC7140492623754IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    1SIMDKC7140492623754IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    1UOMDKC7140328426525IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    1UIMDKC7140328426525IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    1IOMDKC7140197262328IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    1IIMDKC7140197262328IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    2SOMDKC7140492590689IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    2SIMDKC7140492590689IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    2UOMDKC7140328426525IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    2UIMDKC7140328426525IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    2IOMDKC7140197262328IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    2IIMDKC7140197262328IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    3SOMDKC7140328426525IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    3SIMDKC7140328426525IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    3UOMDKC7140262361459IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    3UIMDKC7140262361459IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    3IOMDKC7140164230295IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    3IIMDKC7140164230295IPR.002–.004.003–.005.003–.006.004–.007.004–.008.004–.008
    İnç
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteKesme hızı vcÇap başına önerilen ilerleme oranı (f)
    Aralık SFM
    Min.Başlangıç değeriMaks.2UOHPKCU25656705
    754IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0122UIHPKC7140656705
    .004 – .006.004 – .007.006 – .010
    .002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0122IIHPKC7140426443
    .004 – .006.004 – .007.006 – .010
    .002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0123SIHPKC7140853935
    .004 – .006.004 – .007.006 – .010
    IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0123UIHPKC7140590640
    .004 – .006.004 – .007.006 – .010
    .002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0123IIHPKC7140361394
    .004 – .006.004 – .007.006 – .010
    .002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0124SIHPKC7140722820
    .004 – .006.004 – .007.006 – .010
    IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0124UIHPKC7140492590
    .004 – .006.004 – .007.006 – .010
    .002 – .004.004 – .006.004 – .007.006 – .010.007 – .012.007 – .0124IIHPKC7140295361
    .004 – .006.004 – .007.006 – .010
    .002 – .004.003 – .005.004 – .006.004 – .007.005 – .009.005 – .0095SIHPKC7140590656
    .003 – .005.004 – .006.004 – .007
    İnç
    Kesme hızı vc
    Aralık SFMÇap başına önerilen ilerleme oranı (f)
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteMin.Başlangıç değeriMaks.ØDFT03... .625"–.969"DFT05... .984"–1.250"DFT06... 1.313"–1.563"DFT07... 1.625"–1.875"DFT09... 1.938"–2.125"DFT011... 2.750"–3.250"
    K1SOHPKCPK10656787984IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    1SIHPKCU40656787984IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    1UOHPKCU25394508656IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    1UIHPKC7140394508656IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    1IOHPKCU40262328410IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    1IIHPKC7140262328410IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    2SOHPKCPK10590722853IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    2SIHPKCU40590722853IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    2UOHPKCU25361459558IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    2UIHPKC7140361459558IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    2IOHPKCU40262328394IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    2IIHPKC7140262328394IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    3SOHPKCPK10590722853IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    3SIHPKCU40590722853IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    3UOHPKCU25361459558IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    3UIHPKC7140361459558IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    3IOHPKCU40262328394IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    3IIHPKC7140262328394IPR.003–.005.004–.007.006–.010.007–.013.008–.015.008–.015
    İnç
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteKesme hızı vcÇap başına önerilen ilerleme oranı (f)
    Aralık SFM
    Min.Başlangıç değeriMaks.722IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    .007 – .0126SIHPKC7140590656722IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    UOHP
    6UIHPKC7140394443492IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    IOHP
    6IIHPKC7140230279328IPR.002 – .004.004 – .006.004 – .007.006 – .010.007 – .012
    İnç
    Kesme hızı vc
    Aralık SFMÇap başına önerilen ilerleme oranı (f)
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteMin.Başlangıç değeriMaks.ØDFT03... .625"–.969"DFT05... .984"–1.250"DFT06... 1.313"–1.563"DFT07... 1.625"–1.875"DFT09... 1.938"–2.125"DFT011... 2.750"–3.250"
    N1SOSTKD1425131219682624IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    1SISTKD1425131219682624IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    1UOHPKCU4098413121640IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    1UIHPKCU4098413121640IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    1IOHPKMF6569841312IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    1IIHPKMF6569841312IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    2SOSTKD1425123018042542IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    2SISTKD1425123018042542IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    2UOHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    2UIHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    2IOHPKMF5748201066IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    2IIHPKMF5748201066IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    3SOSTKD1425114816402132IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    3SISTKD1425114816402132IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    3UOHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    3UIHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    3IOHPKMF4928201148IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    3IIHPKMF4928201148IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    4SOSTKD1425131219682624IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    4SISTKD1425131219682624IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    4UOHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    4UIHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    4IOHPKMF6569841312IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    4IIHPKMF6569841312IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    5SOSTKD1425131219682624IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    5SISTKD1425131219682624IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    5UOHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    5UIHPKCU4082011481476IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    5IOHPKMF6569841312IPR.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    5IIHPKMF6569841312ipr.002–.003.003–.004.004–.006.005–.006.006–.007.006–.007
    İnç
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteKesme hızı vcÇap başına önerilen ilerleme oranı (f)
    Aralık SFM
    Min.Başlangıç değeriMaks.
    İnç
    Kesme hızı vc
    Aralık SFMÇap başına önerilen ilerleme oranı (f)
    Malzeme grubuKoşulUç yuvası yatağıGeometriKaliteMin.Başlangıç değeriMaks.ØDFT03... .625"–.969"DFT05... .984"–1.250"DFT06... 1.313"–1.563"DFT07... 1.625"–1.875"DFT09... 1.938"–2.125"DFT011... 2.750"–3.250"
    S1SOHPKCU40197230246IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    1SIHPKCU40197230246IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    1UOHPKCU40131164197IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    1UIHPKC7140131164197IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    1IOMDKC71408298131IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    1IIMDKC71408298131IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    2SOHPKCU40164197230IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    2SIHPKCU40164197230IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    2UOHPKCU4098131164IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    2UIHPKC714098131164IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    2IOMDKC71408298131IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    2IIMDKC71408298131IPR.001–.002.002–.002.002–.003.002–.004.003–.005.003–.005
    3SOHPKCU40230262295IPR.002–.002.002–.004.002–.003.002–.004.004–.006.004–.006
    3SIHPKCU40230262295IPR.002–.002.002–.004.002–.003.002–.004.004–.006.004–.006
    3UOHPKCU40164197230IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    3UIHPKC7140164197230IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    3IOMDKC714098131164IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    3IIMDKC714098131164IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    4SOHPKCU40230262295IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    4SIHPKCU40230262295IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    4UOHPKCU40164197230IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    4UIHPKC7140164197230IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    4IOMDKC714098131164IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    4IIMDKC714098131164IPR.002–.002.002–.003.002–.004.002–.004.004–.006.004–.006
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk