Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip daha az ödeyerek, üretim hacminizi yukarıda tutun! Şimdi Satın Alın

HTS Sistemi

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (159)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(159)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(159)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(159)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(159)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(159)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(159)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(159)
    • M Stainless Steel (158)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(158)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(158)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(158)
    • K Cast Iron (172)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(172)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(172)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(172)
    • N Non-Ferrous Materials (123)
      • N1
        Wrought Aluminum (123)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(123)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(119)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (123)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (123)
      • N6
        Carbon, Graphite Composites, CFRP (123)
      • N7
        MMC's (118)
    • S High-Temp Alloys (148)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(148)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(148)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(148)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(148)
    • H Hardened Materials (31)
      • H1
        Hardened Materials 44-48 HRC(31)
      • H2
        Hardened Materials 48-55 HRC(31)
      • H3
        Hardened Materials 56-60 HRC(31)
      • H4
        Hardened Materials >60 HRC(31)
    First Choicei Seçin
    • BR (21)
    • CN (69)
    • DE (69)
    • GB (53)
    • IN (29)
    • SG (52)
    • US (69)
    Applications
    Applications
    • DrillingDrilling (4)
    Cutting Diameter
    Cutting Diameter
    • 0.197 in(1)
    • 0.237 in(1)
    • 0.315 in(1)
    • 0.394 in(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.0 mm(1)
    • 6.0 mm(1)
    • 8.0 mm(1)
    • 10.0 mm(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Interrupted (50)
    • Stable (124)
    • Unstable (72)
    Connection Style
    Connection Style
    • HTS-C Pilot Drill Shank (4)
    Number of Flutes
    Number of Flutes
    • 2 (4)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (76)
    • 4.0 (113)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.201 in(1)
    • 1.457 in(1)
    • 1.752 in(1)
    • 2.146 in(1)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 30.5 mm(1)
    • 37.0 mm(1)
    • 44.5 mm(1)
    • 54.5 mm(1)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(3)
    • 0.012 in(1)
    • 0.016 in(67)
    • 0.024 in(4)
    • 0.031 in(61)
    • 0.039 in(17)
    • 0.047 in(28)
    • 0.063 in(5)
    • 0.079 in(3)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(3)
    • 0.301 mm(1)
    • 0.4 mm(67)
    • 0.601 mm(4)
    • 0.8 mm(61)
    • 1.0 mm(17)
    • 1.201 mm(28)
    • 1.6 mm(5)
    • 2.0 mm(3)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(189)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(189)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Coating
    Coating
    • Uncoated (4)
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • AS3 (4)
    • CS5 (1)
    • KC7140 (20)
    • KC720 (4)
    • KC7215 (32)
    • KCMS35 (8)
    • KCPK10 (25)
    • KCU25 (46)
    • KCU40 (47)
    • KM1 (6)
    Hand Of Tool
    Hand Of Tool
    • R (4)
    Wiper Insert
    Wiper Insert
    • N (189)
    Drill Type
    Drill Type
    • 81-06 (4)
    frontEnd
    Insert Shape
    Insert Shape
    • S-SQUARE 90 (189)
    Point Angle
    Point Angle
    • 118.0 (4)
    Point Angle Min-Point Angle Max
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (189)
    Insert IC Size
    Insert IC Size
    • 5.551 mm(6)
    • 6.351 mm(27)
    • 7.75 mm(1)
    • 7.926 mm(16)
    • 7.95 mm(24)
    • 9.525 mm(44)
    • 12.701 mm(42)
    • 15.726 mm(20)
    • 15.875 mm(9)
    Insert IC Size Min-Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.219 in(6)
    • 0.25 in(27)
    • 0.305 in(1)
    • 0.312 in(16)
    • 0.313 in(24)
    • 0.375 in(44)
    • 0.5 in(42)
    • 0.619 in(20)
    • 0.625 in(9)
    Insert IC Size Min-Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 5.426 mm(6)
    • 6.2 mm(10)
    • 6.351 mm(17)
    • 7.75 mm(1)
    • 7.801 mm(15)
    • 7.926 mm(25)
    • 9.375 mm(20)
    • 9.525 mm(24)
    • 12.55 mm(14)
    • 12.701 mm(37)
    • 15.726 mm(20)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.214 in(6)
    • 0.244 in(10)
    • 0.25 in(17)
    • 0.305 in(1)
    • 0.307 in(15)
    • 0.312 in(25)
    • 0.369 in(20)
    • 0.375 in(24)
    • 0.494 in(14)
    • 0.5 in(37)
    • 0.619 in(20)
    Cutting Edge Length Min-Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 20 (33)
    • 21 (30)
    • 22 (4)
    • 31 (12)
    • FP (27)
    • HP (34)
    • MD (37)
    • MDT (3)
    Cutting Tool Material
    Cutting Tool Material
    • H W (189)
    Tolerance Class
    Tolerance Class
    • G (51)
    • H (12)
    • P (60)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (4)
    Back-End Diameter
    Back-End Diameter
    • 5.0 mm(1)
    • 6.0 mm(1)
    • 8.0 mm(1)
    • 10.0 mm(1)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.197 in(1)
    • 0.237 in(1)
    • 0.315 in(1)
    • 0.394 in(1)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    Drill Fix™ DFSP™ • HP Inserts
    (34)

    Drill Fix™ DFSP™ • HP Inserts

    Drill Fix™ DFSP™ • FP Inserts
    (27)

    Drill Fix™ DFSP™ • FP Inserts

    Drill Fix™ DFSP™ • MD Inserts
    (36)

    Drill Fix™ DFSP™ • MD Inserts

    SPHX-R20
    (40)

    SPHX-R20

    HTS-C Pilot matkaplar • Yüksek hız çeliği • Karbür
    (4)

    HTS-C Pilot matkaplar • Yüksek hız çeliği • Karbür

    SPHX-R21
    (31)

    SPHX-R21

    SPHX-R22
    (5)

    SPHX-R22

    SPGX...-31(ISO) • SPGT...MD/MDT (ANSI)
    (16)

    SPGX...-31(ISO) • SPGT...MD/MDT (ANSI)

    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Katalog NumarasıKalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?