KM80ATC™
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrikİnç
Workpiece Material
Workpiece Material
- P Steel (52)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(52)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(52)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(52)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(52)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(52)
- M Stainless Steel (48)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(48)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(48)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(48)
- K Cast Iron (52)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(52)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(52)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(52)
- N Non-Ferrous Materials (38)
- N1Wrought Aluminum (38)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(38)
- N3High-Silicon Aluminum Alloys Si >12.2%(23)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (38)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (38)
- N6Carbon, Graphite Composites, CFRP (38)
- N7MMC's (38)
- S High-Temp Alloys (43)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(43)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(43)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(43)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(43)
- H Hardened Materials (36)
- H1Hardened Materials 44-48 HRC(36)
- H2Hardened Materials 48-55 HRC(36)
- H3Hardened Materials 56-60 HRC(36)
- H4Hardened Materials >60 HRC(24)
- C CFRP Materials (31)
- C1CFRP, CFRP / CFRP (31)
- C2CFRP / Aluminium CFRP / Non-Ferrous (31)
Applications
Applications
- Chamfer Turning (3)
- Cut-Off (3)
- Deep Grooving (3)
- Face Grooving (3)
- Facing (30)
- Grooving (7)
- ID Grooving (4)
- ID Thread Turning (4)
- Multiple Direction Cutting (33)
- OD Thread Turning (7)
- Plunge Turning (3)
- Profiling (17)
- TRN Boring (31)
- Threading (7)
- Turning (38)
Type of Thread
Type of Thread
- 60 (7)
- ACME (7)
- API (7)
- API RD (3)
- BSW (3)
- BUTTRESS (7)
- M (3)
- NPT (3)
- STUB ACME (3)
- UN (7)
- UNJ (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (50)
- Lightly Interrupted Cut (52)
- Smooth Cut (52)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 75.0 (15)
- 90.0 (13)
- 93.0 (10)
- 95.0 (8)
- 107.5 (4)
-
Connection Style
Connection Style
- KM (35)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (30)
- 2.0 (36)
- 4.0 (39)
- 8.0 (27)
-
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.757 in(50)
- 3.15 in(2)
-
Over All Length [L]
Over All Length [L]
- 70.0 mm(50)
- 80.0 mm(2)
-
Corner Radius
Corner Radius
- 0.002 in(3)
- 0.003 in(7)
- 0.004 in(19)
- 0.005 in(3)
- 0.006 in(7)
- 0.007 in(7)
- 0.008 in(17)
- 0.01 in(7)
- 0.011 in(3)
- 0.012 in(3)
- 0.014 in(13)
- 0.016 in(21)
- 0.019 in(7)
- 0.02 in(3)
- 0.023 in(7)
- 0.031 in(32)
- 0.035 in(7)
- 0.039 in(3)
- 0.047 in(32)
- 0.049 in(3)
- 0.06 in(3)
- 0.062 in(5)
- 0.063 in(44)
- 0.069 in(3)
- 0.078 in(3)
- 0.079 in(7)
- 0.089 in(7)
- 0.094 in(18)
- 0.095 in(30)
- 0.098 in(4)
- 0.125 in(4)
- 0.126 in(12)
- 0.157 in(5)
- 0.394 in(2)
- 0.492 in(2)
- 0.63 in(2)
-
Corner Radius
Corner Radius
- 0.05 mm(3)
- 0.076 mm(7)
- 0.1 mm(19)
- 0.125 mm(3)
- 0.151 mm(7)
- 0.176 mm(7)
- 0.2 mm(17)
- 0.225 mm(3)
- 0.25 mm(7)
- 0.275 mm(3)
- 0.301 mm(3)
- 0.325 mm(7)
- 0.351 mm(13)
- 0.4 mm(21)
- 0.45 mm(7)
- 0.476 mm(1)
- 0.5 mm(3)
- 0.576 mm(7)
- 0.775 mm(3)
- 0.8 mm(29)
- 0.9 mm(7)
- 1.0 mm(3)
- 1.201 mm(32)
- 1.25 mm(3)
- 1.5 mm(3)
- 1.576 mm(5)
- 1.6 mm(44)
- 1.75 mm(3)
- 1.975 mm(3)
- 2.0 mm(7)
- 2.25 mm(7)
- 2.375 mm(18)
- 2.401 mm(30)
- 2.5 mm(4)
- 3.176 mm(4)
- 3.2 mm(12)
- 4.0 mm(5)
- 10.0 mm(2)
- 12.5 mm(2)
- 16.0 mm(2)
-
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (24)
- 241 (2)
- CG4 (2)
- CL4 (21)
- CM2 (23)
- CM3 (21)
- CM4 (4)
- CM5 (2)
- CPX (29)
- CW2 (8)
- CW2015 (16)
- CW5025 (16)
- GX (15)
- HK1500 (9)
- HT2 (8)
- HTX (2)
- K060 (8)
- K090 (29)
- K1 (18)
- K10M (29)
- K10P (24)
- K10U (16)
- K15U (16)
- K20K (29)
- K21 (13)
- K25M (18)
- K25P (27)
- K2885 (3)
- K313 (38)
- K35P (19)
- K420 (39)
- K45 (10)
- K4H (3)
- K68 (38)
- KB1340 (2)
- KB1345 (15)
- KB1610 (10)
- KB1625 (10)
- KB1630 (17)
- KB5610 (10)
- KB5625 (13)
- KB5630 (10)
- KB9610 (16)
- KB9640 (2)
- KBH10 (16)
- KBH10B (16)
- KBH20 (17)
- KBH20B (16)
- KBK35 (2)
- KC210 (25)
- KC250 (24)
- KC5010 (48)
- KC5025 (36)
- KC5410 (36)
- KC5510 (29)
- KC5525 (14)
- KC710 (9)
- KC720 (24)
- KC722 (9)
- KC730 (32)
- KC7310 (29)
- KC732 (15)
- KC8050 (41)
- KC810 (36)
- KC850 (48)
- KC9010 (31)
- KC9025 (39)
- KC910 (32)
- KC9105 (24)
- KC9110 (52)
- KC9120 (42)
- KC9125 (45)
- KC9140 (39)
- KC9145 (39)
- KC9210 (6)
- KC9215 (29)
- KC9225 (29)
- KC9240 (43)
- KC9240NEW (38)
- KC9245 (29)
- KC9315 (31)
- KC9320 (36)
- KC9325 (29)
- KC935 (41)
- KC950 (41)
- KC990 (34)
- KCD25 (6)
- KCK05 (29)
- KCK05B (29)
- KCK15 (29)
- KCK15B (31)
- KCK20 (40)
- KCK20B (43)
- KCM15 (29)
- KCM15B (24)
- KCM25 (36)
- KCM25B (34)
- KCM35 (29)
- KCM35B (21)
- KCP05 (18)
- KCP05B (21)
- KCP10 (45)
- KCP10B (45)
- KCP25 (45)
- KCP25B (50)
- KCP25C (52)
- KCP30 (41)
- KCP30B (37)
- KCP40 (37)
- KCP40B (39)
- KCPK05 (33)
- KCS10 (4)
- KCS10B (29)
- KCU10 (48)
- KCU10B (38)
- KCU25 (38)
- KCU25B (36)
- KD050 (11)
- KD081 (13)
- KD100 (15)
- KD120 (17)
- KD1400 (10)
- KD1405 (10)
- KD1425 (13)
- KM1 (9)
- KMF (2)
- KS15 (2)
- KT1120 (4)
- KT125 (16)
- KT150 (10)
- KT175 (19)
- KT315 (23)
- KT325 (8)
- KT5020 (2)
- KTP10 (16)
- KTP25S (16)
- KU10T (23)
- KU25T (7)
- KU30T (36)
- KY1310 (10)
- KY1320 (24)
- KY1540 (14)
- KY1615 (26)
- KY2000 (16)
- KY2100 (8)
- KY3000 (36)
- KY3400 (21)
- KY3500 (29)
- KY4000 (6)
- KY4300 (16)
- KY4400 (24)
- KYHK15B (24)
- KYK10 (8)
- KYK25 (16)
- KYK35 (29)
- KYS25 (14)
- KYS30 (14)
- MC2 (2)
- NL200 (8)
- NL250 (29)
- NL300 (33)
- NL400 (15)
- NL920 (23)
- P25 (2)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (8)
- SP0819 (21)
- SP3019 (15)
- SP4019 (16)
- SP4036 (2)
- SP4093 (2)
- SPADAP (21)
- SPN4W2 (5)
- THM (16)
- THM-X (3)
- THMF-X (2)
- TN10P (21)
- TN10U (9)
- TN15M (21)
- TN15U (9)
- TN2000 (14)
- TN20K (21)
- TN20P (21)
- TN30M (21)
- TN30P (24)
- TN4000 (14)
- TN5015 (17)
- TN5020 (17)
- TN5105 (7)
- TN5120 (19)
- TN6010 (16)
- TN6025 (10)
- TN7005 (7)
- TN7010 (21)
- TN7015 (31)
- TN7025 (31)
- TN7035 (17)
- TN7105 (3)
- TN7110 (23)
- TN7115 (31)
- TN7125 (27)
- TN7135 (17)
- TN8025 (29)
- TTI15 (3)
- TTM09 (5)
- TTR (4)
- TTR-X (5)
- TTS (14)
- TTX (3)
- W00342 (5)
- WBH10C (9)
- WBH10P (8)
- WBH10U (8)
- WBH20P (9)
- WBH25P (8)
- WBH25U (7)
- WBH30P (8)
- WBK40U (2)
- WBK45U (7)
- WDN00U (6)
- WDN25U (8)
- WK05CT (21)
- WK15CT (3)
- WK20CT (23)
- WM15CT (21)
- WM25CT (26)
- WM35CT (21)
- WP05CT (2)
- WP15CT (33)
- WP25CT (33)
- WP35CT (33)
- WS10PT (21)
- WS25PT (21)
- WU10HT (17)
- WU10PT (9)
- WU25PT (7)
- X00511 (2)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
- YY72VD (2)
Hand Of Tool
Hand Of Tool
- L (17)
- N (2)
- R (16)
Wiper Insert
Wiper Insert
- N (52)
- Y (14)
F Dimension
F Dimension
- 0.0 mm(2)
- 48.0 mm(8)
- 53.0 mm(25)
-
F Dimension
F Dimension
- 0.0 in(2)
- 1.891 in(8)
- 2.087 in(25)
-
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(3)
- 41.301 mm(1)
- 47.6 mm(1)
- 57.2 mm(2)
- 88.9 mm(1)
- 106.0 mm(31)
- 139.701 mm(1)
- 174.601 mm(1)
- 209.601 mm(2)
- 222.3 mm(2)
-
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(3)
- 1.627 in(1)
- 1.874 in(1)
- 2.253 in(2)
- 3.5 in(1)
- 4.173 in(31)
- 5.5 in(1)
- 6.875 in(1)
- 8.252 in(2)
- 8.752 in(2)
-
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(7)
-
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(7)
-
Cutting Direction
Cutting Direction
- B (4)
- E (13)
- S (18)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (26)
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
- 2.757 in(31)
-
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(31)
-
frontEnd
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (5)
- CARTRIDGE MOUNT (4)
- DRILL SHANK 2 FLATS (5)
- END MILL ADAPTER (4)
- ER COLLET CHUCK (2)
- EXTENSION (2)
- REDUCER (5)
- SHELL MILL ADAPTER (12)
- SHRINK FIT ADAPTER (16)
- SQUARE SHANK ADAPTER (10)
- WHISTLE DRIVE ADAPTER (3)
- WHISTLE NOTCH ADAPTER (6)
Clamp Style
Clamp Style
- D (16)
- M (23)
- N (7)
- P (6)
Cutting Width
Cutting Width
- 0.039 in(3)
- 0.047 in(3)
- 0.06 in(3)
- 0.062 in(3)
- 0.069 in(3)
- 0.073 in(3)
- 0.078 in(3)
- 0.079 in(3)
- 0.088 in(3)
- 0.089 in(2)
- 0.094 in(1)
- 0.095 in(3)
- 0.097 in(3)
- 0.098 in(3)
- 0.105 in(3)
- 0.108 in(3)
- 0.11 in(3)
- 0.119 in(7)
- 0.122 in(3)
- 0.125 in(7)
- 0.126 in(7)
- 0.128 in(3)
- 0.131 in(1)
- 0.138 in(7)
- 0.143 in(3)
- 0.156 in(3)
- 0.157 in(7)
- 0.167 in(7)
- 0.169 in(3)
- 0.177 in(7)
- 0.178 in(3)
- 0.185 in(5)
- 0.188 in(7)
- 0.189 in(7)
- 0.192 in(1)
- 0.193 in(1)
- 0.195 in(3)
- 0.196 in(3)
- 0.197 in(4)
- 0.202 in(4)
- 0.213 in(4)
- 0.217 in(4)
- 0.219 in(4)
- 0.237 in(4)
- 0.25 in(4)
- 0.256 in(4)
-
Cutting Width
Cutting Width
- 1.0 mm(3)
- 1.201 mm(3)
- 1.5 mm(3)
- 1.576 mm(3)
- 1.75 mm(3)
- 1.826 mm(3)
- 1.975 mm(3)
- 2.0 mm(3)
- 2.2 mm(3)
- 2.225 mm(3)
- 2.25 mm(2)
- 2.375 mm(1)
- 2.401 mm(3)
- 2.475 mm(3)
- 2.5 mm(3)
- 2.676 mm(3)
- 2.75 mm(3)
- 2.801 mm(3)
- 3.0 mm(7)
- 3.1 mm(3)
- 3.176 mm(7)
- 3.2 mm(7)
- 3.25 mm(3)
- 3.325 mm(1)
- 3.5 mm(7)
- 3.6 mm(3)
- 3.95 mm(3)
- 3.975 mm(1)
- 4.0 mm(7)
- 4.25 mm(7)
- 4.3 mm(3)
- 4.5 mm(7)
- 4.525 mm(3)
- 4.7 mm(5)
- 4.775 mm(7)
- 4.801 mm(7)
- 4.875 mm(1)
- 4.9 mm(1)
- 4.95 mm(3)
- 4.976 mm(3)
- 5.0 mm(4)
- 5.125 mm(4)
- 5.4 mm(4)
- 5.5 mm(4)
- 5.575 mm(4)
- 6.0 mm(4)
- 6.351 mm(4)
- 6.5 mm(4)
-
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (9)
- KMT - KM Adapter (7)
- MCS - Modular Cartridge System (4)
- SPK-Holding Arbor-Spindle Head (3)
- SZK - Collet Taper (2)
- VKT - Square Shank (10)
- ZYL - Cylindrical Adapter (39)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (15)
- D-DIAMOND/RHOMBIC 55 (12)
- R-ROUND (6)
- S-SQUARE 90 (10)
- TN-TOP NOTCH (7)
- V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
- FDA12 Transv Drive&CutRetScr (1)
- FDA22 Transv Drive & SHCS (7)
- FDA42TranDrvw/CtrScrwORBoltCir (1)
- KMT00 All KM, except 02,05,09 (7)
- MCS01 Modular Deep Grooving (4)
- SPK02 Bolt Circ Dia 101.6 mm (3)
- SZK02 Collets 8 Degree Taper (2)
- VKT01 Std Design (10)
- ZYL01 Straight Shank (16)
- ZYL10 Weldon Shank (4)
- ZYL13 2Deg-Whistle Notch (6)
- ZYL22 Boring Bar Shank (5)
- ZYL56 2Plain Clamp Surf w/Pcs (5)
- ZYL63 2Deg Surf w/Cyl.w/drive (3)
Insert Size
Insert Size
- 3 (3)
- 4 (4)
Gage Length
Gage Length
- 5 in(1)
- 1.48 in(2)
- 1.575 in(5)
- 1.693 in(2)
- 1.772 in(5)
- 1.846 in(2)
- 2.165 in(2)
- 2.25 in(1)
- 2.362 in(2)
- 2.5 in(2)
- 2.559 in(1)
- 2.618 in(2)
- 2.757 in(1)
- 3.15 in(3)
- 3.346 in(4)
- 3.5 in(1)
- 3.543 in(4)
- 3.74 in(4)
- 3.819 in(1)
- 3.938 in(5)
- 4.134 in(6)
- 4.331 in(1)
- 4.5 in(2)
- 4.529 in(2)
- 4.724 in(3)
- 4.921 in(1)
- 5.118 in(3)
- 5.5 in(1)
- 5.513 in(1)
- 6.299 in(2)
- 6.5 in(1)
- 8.5 in(1)
Gage Length
Gage Length
- 105 mm(6)
- 100 mm(5)
- 40 mm(5)
- 45 mm(5)
- 85 mm(4)
- 90 mm(4)
- 95 mm(4)
- 120 mm(3)
- 130 mm(3)
- 80 mm(3)
- 115 mm(2)
- 160 mm(2)
- 43 mm(2)
- 55 mm(2)
- 60 mm(2)
- 110 mm(1)
- 125 mm(1)
- 127 mm(1)
- 140 mm(1)
- 65 mm(1)
- 70 mm(1)
- 97 mm(1)
- 37.6 mm(2)
- 46.901 mm(2)
- 57.151 mm(1)
- 63.5 mm(2)
- 66.5 mm(2)
- 88.9 mm(1)
- 114.301 mm(2)
- 139.701 mm(1)
- 165.101 mm(1)
- 215.9 mm(1)
Front End Size
Front End Size
- 0.313 in(1)
- 0.375 in(1)
- 0.438 in(1)
- 0.473 in(2)
- 0.5 in(1)
- 0.564 in(1)
- 0.625 in(2)
- 0.63 in(2)
- 0.709 in(1)
- 0.75 in(2)
- 0.787 in(2)
- 0.984 in(1)
- 1.0 in(5)
- 1.063 in(1)
- 1.248 in(2)
- 1.25 in(3)
- 1.26 in(3)
- 1.5 in(5)
- 1.575 in(5)
- 1.969 in(4)
- 2.0 in(5)
- 2.362 in(1)
- 2.48 in(3)
- 2.5 in(2)
- 3.15 in(2)
-
Front End Size
Front End Size
- 7.95 mm(1)
- 9.525 mm(1)
- 11.125 mm(1)
- 12.0 mm(2)
- 12.701 mm(1)
- 14.3 mm(1)
- 15.875 mm(2)
- 16.0 mm(2)
- 18.0 mm(1)
- 19.05 mm(2)
- 20.0 mm(2)
- 25.0 mm(1)
- 25.401 mm(5)
- 27.0 mm(1)
- 31.701 mm(2)
- 31.75 mm(3)
- 32.0 mm(3)
- 38.1 mm(5)
- 40.0 mm(5)
- 50.0 mm(4)
- 50.801 mm(5)
- 60.0 mm(1)
- 63.0 mm(3)
- 63.5 mm(2)
- 80.0 mm(2)
-
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (18)
- B L (19)
- C A (31)
- C N (36)
- D P (21)
- H T (25)
- H W (52)
backEnd
Connection Type
Connection Type
- TAPER SHANK (35)
System Size
System Size
- KM80 (5)
- KM80ATC (104)
No filters matching ""