Paket olarak satılır 0
Downloaded file will be available after import in the SolidCAM tool library.
| SAP Material Number | 1522131 |
| ISO Catalog Number | DFT0875R4SSF125 |
| ANSI Catalog Number | DFT0875R4SSF125 |
| [D] Adapter / Shank / Bore Diameter | 31.75 mm |
| [D] Adapter / Shank / Bore Diameter | 1.25 in |
| [D1] Drill Diameter M | 22.225 mm |
| [D1] Drill Diameter M | .875 in |
| [D1MAX] Drill Diameter Maximum | 24.13 mm |
| [D1MAX] Drill Diameter Maximum | .95 in |
| [L1] Insert Gage Length | 127 mm |
| [L1] Insert Gage Length | 5 in |
| [L4] Maximum Drilling Depth | 88.9 mm |
| [L4] Maximum Drilling Depth | 3.5 in |
| [L5] Drill Point Length | 0.837 mm |
| [L5] Drill Point Length | .033 in |
| [LS] Shank Length | 82.55 mm |
| [LS] Shank Length | 3.25 in |
| Gage Insert | DFT0303. |
Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
Drilling: Convex
Shank - Cylindrical with Flat and Flange
Through Coolant: Radial: Indexable Drilling
Drilling: Blind
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
 |
||||
| D | LS | CF | CS | pipe plug |
| 0.750 | 2.00 | 1/8-27 NPT | R 1/8-27 NPT | 1025612 |
| 1.000 | 3.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.250 | 3.25 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.500 | 3.75 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 2.000 | 4.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| Inch | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU25 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | ||
| I | HP | KC7140 | |||||||||||||
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | ||
| I | HP | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed
|
|||||||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 |
| 1 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | U | O | MD | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | U | I | MD | KC7140 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | I | O | MD | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | I | I | MD | KC7140 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | S | O | HP | KCPK10 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | S | I | HP | KC7140 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | U | O | HP | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | U | I | HP | KC7140 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | I | O | HP | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | I | I | HP | KC7140 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | S | O | HP | KCPK10 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | S | I | HP | KC7140 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | U | O | HP | KCU25 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | U | I | HP | KC7140 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | I | I | HP | KC7140 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | S | O | HP | KCU25 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | S | I | HP | KC7140 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | U | O | HP | KCU40 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | U | I | HP | KC7140 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | I | O | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | I | I | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| Inch | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| M | 1 | S | O | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed
|
|||||||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| M | 1 | S | O | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 |
| 1 | S | I | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | U | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | I | I | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | S | O | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | S | I | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | U | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | I | I | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | S | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | S | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | U | O | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | U | I | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | I | O | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | I | I | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| Inch | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| K | 1 | S | O | HP | KCPK10 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | ||
| I | HP | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed
|
|||||||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| K | 1 | S | O | HP | KCPK10 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 |
| 1 | S | I | HP | KCU40 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | U | O | HP | KCU25 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | U | I | HP | KC7140 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | I | O | HP | KCU40 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | I | I | HP | KC7140 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | S | I | HP | KCU40 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | U | I | HP | KC7140 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | I | I | HP | KC7140 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | S | I | HP | KCU40 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | U | I | HP | KC7140 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | I | I | HP | KC7140 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| Inch | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| N | 1 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 2 | S | O | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 3 | S | O | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 4 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| 5 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST | KD1425 | |||||||||||||
| U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KCU40 | |||||||||||||
| I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | ||
| I | HP | KMF | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed
|
|||||||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| N | 1 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| 1 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | U | O | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | U | I | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | I | I | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | S | O | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | S | I | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | I | O | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | I | I | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | S | O | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | S | I | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | I | O | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | I | I | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | I | I | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | I | I | HP | KMF | 656 | 984 | 1312 | ipr | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| Inch | |||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Cutting Speed
|
Recommended Feed Rate (f) by Diameter | |||||||||
| Range
|
|||||||||||||||
| Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | ||||||
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | ||
| I | MD | KC7140 | |||||||||||||
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | MD | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| I | HP | KCU40 | |||||||||||||
| U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | ||
| I | MD | KC7140 | |||||||||||||
| Inch | |||||||||||||||
| Cutting Speed
|
|||||||||||||||
| Range
|
Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material
|
Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 |
| 1 | S | I | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | U | O | HP | KCU40 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | U | I | HP | KC7140 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | I | I | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | S | I | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | U | O | HP | KCU40 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | U | I | HP | KC7140 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | I | I | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | S | I | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | U | I | HP | KC7140 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | I | I | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | S | I | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | U | I | HP | KC7140 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | I | I | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
ISO Katalog Numarası
ANSI Katalog Numarası
to find similar products.Please select a file to download
Models
Product data
I have read and accepted the Terms & Conditions of use
Can’t find the file type you’re looking for?
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog Numarası | Kalite |
|---|
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.
Başarılı kaydınız için teşekkür ederiz. Artık hemen giriş yapabilir ve siteyi kullanabilirsiniz.
You are about to leave the Solution building process.
Are you sure you want to leave?
