Drilling: Stacked Plates
Drilling
Tool Dimensions: 2flute/2margin/coolant
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
DIN Numbers: ER ColletDownloaded file will be available after import in the {{cadTool}} tool library.
| Ürün Numarası | 5987826 |
| ISO Katalog No | B284A15400HPS |
| ANSI Catalog No | B284A15400HPS |
| Grade | KN15 |
| [D1] Drill Diameter M | 15.4 mm |
| [D1] Drill Diameter M | 0.6063 in |
| [L] Overall Length | 115 mm |
| [L] Overall Length | 4.5276 in |
| [L3] Flute Length | 65 mm |
| [L3] Flute Length | 2.5591 in |
| [L4] Maximum Drilling Depth | 45 mm |
| [L4] Maximum Drilling Depth | 1.7717 in |
| [L5] Drill Point Length | 2.84 mm |
| [L5] Drill Point Length | 0.1118 in |
| [LS] Shank Length | 48 mm |
| [LS] Shank Length | 1.8898 in |
| [D] Adapter / Shank / Bore Diameter | 16 mm |
| [D] Adapter / Shank / Bore Diameter | 0.6299 in |
Drilling: Stacked PlatesDrillingTool Dimensions: 2flute/2margin/coolantDIN number 6535DIN number 6537Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°DIN Numbers: ER ColletKaliteler
KN15
Composition: Uncoated, highly wear-resistant fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for non-ferrous materials.
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
| Malzeme grubu |  |  |  | ||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| N | 1 | 120 | 230 | 450 | mm/dev | 0,13 | 0,14 | 0,17 | 0,21 | 0,27 | 0,33 | 0,37 | 0,43 |
| 2 | 120 | 220 | 350 | mm/dev | 0,14 | 0,15 | 0,17 | 0,22 | 0,29 | 0,34 | 0,39 | 0,45 | |
| 3 | 100 | 180 | 400 | mm/dev | 0,13 | 0,14 | 0,16 | 0,20 | 0,28 | 0,33 | 0,38 | 0,44 | |
| 4 | 100 | 130 | 300 | mm/dev | 0,10 | 0,12 | 0,14 | 0,16 | 0,18 | 0,20 | 0,24 | 0,28 | |
| Malzeme grubu | | | | ||||||||||
| Malzeme grubu | Kesme hızı | İnç | |||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| N | 1 | 390 | 750 | 1480 | IPR | .005–.010 | .006–.011 | .007–.014 | .008–.017 | .011–.020 | .013–.022 | .015–.027 | .017–.032 |
| 2 | 390 | 720 | 1150 | IPR | .006–.009 | .006–.011 | .007–.013 | .009–.015 | .011–.018 | .013–.021 | .015–.026 | .018–.032 | |
| 3 | 330 | 590 | 1310 | IPR | .005–.008 | .006–.008 | .006–.011 | .008–.013 | .011–.016 | .013–.018 | .015–.024 | .017–.027 | |
| 4 | 330 | 430 | 980 | IPR | .004–.007 | .005–.008 | .006–.010 | .006–.012 | .007–.013 | .008–.015 | .009–.017 | .011–.018 | |
| | | |||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 3.0 | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | ||
| N | 1 | 120 | 230 | 450 | mm/giro | 0.13 | 0.14 | 0.17 | 0.21 | 0.27 | 0.33 | 0.37 | 0.43 |
| 2 | 120 | 220 | 350 | mm/giro | 0.14 | 0.15 | 0.17 | 0.22 | 0.29 | 0.34 | 0.39 | 0.45 | |
| 3 | 100 | 180 | 400 | mm/giro | 0.13 | 0.14 | 0.16 | 0.20 | 0.28 | 0.33 | 0.38 | 0.44 | |
| 4 | 100 | 130 | 300 | mm/giro | 0.10 | 0.12 | 0.14 | 0.16 | 0.18 | 0.20 | 0.24 | 0.28 | |
| Tolerans • Metrik | ||
| Anma ölçüsü aralığı | D1 Tolerans m7 | D Tolerans h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Tolerans • İnç | ||
| Anma ölçüsü aralığı | D1 Tolerans m7 | D Tolerans h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO Katalog Numarası
ANSI Katalog Numarası
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog Numarası | Kalite |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?