Benzer Ürün:
Mill 1-18™ • Carbide Insert • EDPT-GD • Medium Machining
Shoulder milling insert with two cutting edges per insert
Ürün Numarası2271121
ISO Katalog NoEDPT180508PDERGDANSI Catalog NoEP1808E
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Ürün Numarası | 2271121 |
ISO Katalog No | EDPT180508PDERGD |
ANSI Catalog No | EP1808E |
Grade | KC715M |
[LI] Insert Length | 21.76 mm |
[LI] Insert Length | .857 in |
[L10] Insert Cutting Edge Length | 18.61 mm |
[L10] Insert Cutting Edge Length | .733 in |
[S] Insert Thickness | 5.5 mm |
[S] Insert Thickness | .2165 in |
[W] Insert Width | 10.97 mm |
[W] Insert Width | .432 in |
[BS] Corner Facet Length | 2.69 mm |
[BS] Corner Facet Length | .106 in |
[Rε] Corner Radius | 0.8 mm |
[Rε] Corner Radius | .0312 in |
Average Chip Thickness [HM] | 0.089 mm |
Average Chip Thickness [HM] | .0035 in |
Cutting Edges per Insert | 2 |
Özellikler ve avantajlar
- Pressed-to-size, for lowest cost per cutting edge.
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
Uç Seçimi
Kesici uç seçme rehberi
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
P3–P4 | .E..GD | KCPK30 | .S..GD | KCPK30 | .E..HD | KCPK30 |
P5–P6 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
M1–M2 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
M3 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
K1–K2 | .E..GD | KCK20B | .E..GD | KCK20B | .S..GD | KCK15 |
K3 | .E..GD | KCK20B | .S..GD | KCK15 | .E..HD | KCPK30 |
N1–N2 | .F..LDJ | KC410M | .E..LDJ | KC422M | .E..LDJ | KC422M |
N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .F..LDJ | KC410M |
S1–S2 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
S3 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
S4 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
H1 | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use