BF Bodies
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (46)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(46)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(46)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(46)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(46)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(46)
- M Stainless Steel (46)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(46)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(46)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(46)
- K Cast Iron (46)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
- N Non-Ferrous Materials (46)
- N1Wrought Aluminum (46)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(46)
- N3High-Silicon Aluminum Alloys Si >12.2%(46)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (46)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (46)
- N6Carbon, Graphite Composites, CFRP (46)
- N7MMC's (46)
- S High-Temp Alloys (46)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(46)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(46)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(46)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(46)
Applications
Applications
Countersinking (46)
Drilling (46)
Inclined Exit Drilling (46)
Stacked Plates Drilling (46)
Cutting Diameter
Cutting Diameter
- 0.125 in(1)
- 0.134 in(1)
- 0.161 in(2)
- 0.181 in(2)
- 0.182 in(1)
- 0.201 in(2)
- 0.213 in(1)
- 0.219 in(2)
- 0.24 in(2)
- 0.25 in(1)
- 0.281 in(1)
- 0.288 in(2)
- 0.319 in(3)
- 0.328 in(1)
- 0.358 in(2)
- 0.359 in(1)
- 0.398 in(2)
- 0.408 in(1)
- 0.437 in(3)
- 0.48 in(2)
- 0.484 in(1)
- 0.516 in(3)
- 0.555 in(2)
- 0.564 in(1)
- 0.61 in(2)
- 0.625 in(1)
- 0.65 in(1)
- 0.69 in(2)
to
Cutting Diameter
Cutting Diameter
- 3.176 mm(1)
- 3.401 mm(1)
- 4.101 mm(2)
- 4.601 mm(2)
- 4.625 mm(1)
- 5.101 mm(2)
- 5.4 mm(1)
- 5.551 mm(2)
- 6.101 mm(2)
- 6.351 mm(1)
- 7.15 mm(1)
- 7.301 mm(2)
- 8.1 mm(3)
- 8.326 mm(1)
- 9.1 mm(2)
- 9.125 mm(1)
- 10.101 mm(2)
- 10.326 mm(1)
- 11.101 mm(3)
- 12.201 mm(2)
- 12.3 mm(1)
- 13.101 mm(3)
- 14.101 mm(2)
- 14.3 mm(1)
- 15.5 mm(2)
- 15.875 mm(1)
- 16.5 mm(1)
- 17.5 mm(2)
to
Connection Style
Connection Style
- Straight-Cylindrical (29)
- Whistle Notch 2 (17)
Number of Flutes
Number of Flutes
- 1 (21)
- 2 (25)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (31)
- 1.0 (46)
to
Over All Length [L]
Over All Length [L]
- 3.446 in(12)
- 3.831 in(9)
- 4.311 in(1)
- 4.622 in(6)
- 5.005 in(9)
- 5.016 in(8)
- 5.142 in(1)
to
Over All Length [L]
Over All Length [L]
- 87.5 mm(12)
- 97.301 mm(9)
- 109.5 mm(1)
- 117.4 mm(6)
- 127.101 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CD3 (46)
- CS5 (46)
- KC7315 (46)
- KC7320 (9)
- KC7410 (31)
- KCP15 (31)
- KCPM45 (31)
- KM1 (46)
- KMF (46)
- P30 (46)
Countersunk Angle
Countersunk Angle
- 30.0 (46)
- 41.0 (46)
- 45.0 (46)
- 50.0 (22)
to
Front-End
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (46)
- KENTIP DRILL (31)
Back-End
Back-End Diameter
Back-End Diameter
- 19.05 mm(5)
- 20.0 mm(16)
- 25.401 mm(5)
- 31.75 mm(3)
- 32.0 mm(17)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(5)
- 0.787 in(16)
- 1.0 in(5)
- 1.25 in(3)
- 1.26 in(17)
to
No filters matching ""
