KenTIP™ FS Modular Drill System

Country

Language

Unit of Measure

Modular Drilling with Solid Carbide Performance

The KenTIP FS modular drill covers more applications and provides better performance than any other modular system, delivering substantial cost savings and process simplifications on your shop floor.

Carbide where it matters – KenTIP FS inserts cover the entire front part of the drill. The coupling is completely protected from chip flow and contact with the workpiece.

Features & Benefits

This modular drilling system covers a 6–26mm diameter range.
Up to 12xD drilling depths.
Applicable in steels, stainless steels, and cast iron.
Large, ultra-high polished chip flutes guarantee hassle-free chip evacuation, enhancing tool life and performance.
Taper interface uniquely designed for highest rigidity clamping.
Retention lock prevents insert pullout.
Large bearing surface positioned for transmission of highest torsional loads without pocket deformation.
Large face contact surface.
Coolant delivery to the drill point and to the rake for guaranteed coolant delivery where it is needed.
Straight fluted drills for static drilling applications
Straight fluted drills for combined drilling and countersinking applications

KenTIP FS Modular Drill Inserts

GTP Inserts

KenTIP FS GTP insert with the GOdrill™ point design.
GTP insert for universal applications
For steel, stainless steel and cast iron.
GOdrill geometry with 140° point angle.
Excellent centering capabilities and low axial forces.
Through coolant.

DAV Insert for Vibration Assisted Drilling of CFRP Stacks

For CFRP stacks with metal exit, non-ferrous materials, and high temperature alloys
Double angle geometry with 128º and 155º point angle to minimize exit burrs
Through coolant
Uncoated for cost-efficient drilling
Diamond coating for extended tool life optional

FEG Insert

FEG inserts with 180° point geometry for holes that require a flat bottom, performing two operations in one.
In conjunction with the other KenTIP™ FS inserts (HPG, HPC, HPL geometries), the FEG insert can be utilized as pilot drill point for deep-hole applications.
180° point geometry for holes that require a flat bottom.
Corner chamfer to reduce burr formation.
Four margin lands for hole straightness and stability on inclined exits.

HPG Inserts

HPG-point geometry for steels.
Great positioning and centering capabilities for drilling without precentering, even in deeper holes.
KCP15A™ is an AlTiN PVD monolayer coating.
Enhanced thermal stability.

HPC Inserts

HPC-point geometry for all cast irons.
4-margin lands ensure hole straightness.
Large corner radius prevents chipping and reduces exit burs when drilling through holes.
KC7410™ is an AlCr PVD multilayer coating.

SPF Insert for CFRP

Double angle geometry with 128° and 90° point angle to avoid delamination
Through coolant
Diamond coating for best tool life

HPL Inserts

HPL-point geometry for stainless steels.
Forms 2 chips per cutting edge for an uninterrupted and smooth chip flow.
KCMS15™ is an AlTiN PVD monolayer coating.
Prevents edge build-up, which delivers superior hole quality.

Select Filters

Filters

View filters in

Metric

Inch

No filters matching ""

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Welcome

Please confirm your preferences

Update Preferences

Product Suggestions

Product Family suggestions

KenTIP™ FS

Modular Drilling

Modular Drilling with Solid Carbide Performance

Features & Benefits