Beyond Evolution Modular Systems
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (42)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(42)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(42)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(42)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(42)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(42)
- M Stainless Steel (42)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(42)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(42)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(42)
- K Cast Iron (42)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(42)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(42)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(42)
- N Non-Ferrous Materials (42)
- N1Wrought Aluminum (42)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
- N6Carbon, Graphite Composites, CFRP (42)
- S High-Temp Alloys (42)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(42)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(42)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
- H Hardened Materials (42)
- H1Hardened Materials 44-48 HRC(42)
- H2Hardened Materials 48-55 HRC(42)
Applications
Applications
CRT Profiling (2)
Cut-Off (42)
Deep Grooving (2)
Grooving (62)
ID Grooving (16)
Multiple Direction Cutting (16)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (42)
- Lightly Interrupted Cut (42)
- Smooth Cut (42)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (42)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.881 in(10)
- 1.954 in(4)
- 2.037 in(8)
- 2.274 in(4)
- 2.347 in(4)
- 2.431 in(6)
- 2.584 in(2)
- 2.668 in(4)
- 5.327 in(2)
- 5.348 in(2)
- 5.372 in(4)
- 5.394 in(4)
- 5.463 in(2)
- 5.508 in(6)
- 5.906 in(4)
- 5.915 in(2)
- 5.961 in(6)
- 6.0 in(8)
- 6.114 in(2)
- 6.136 in(2)
- 6.25 in(2)
- 6.372 in(2)
- 6.394 in(2)
- 6.694 in(4)
- 6.703 in(2)
- 7.0 in(4)
to
Over All Length [L]
Over All Length [L]
- 47.75 mm(10)
- 49.625 mm(4)
- 51.75 mm(8)
- 57.75 mm(4)
- 59.625 mm(4)
- 61.75 mm(6)
- 65.625 mm(2)
- 67.75 mm(4)
- 135.3 mm(2)
- 135.85 mm(2)
- 136.451 mm(4)
- 137.0 mm(4)
- 138.75 mm(2)
- 139.9 mm(6)
- 150.0 mm(4)
- 150.25 mm(2)
- 151.4 mm(6)
- 152.4 mm(8)
- 155.3 mm(2)
- 155.851 mm(2)
- 158.75 mm(2)
- 161.851 mm(2)
- 162.4 mm(2)
- 170.0 mm(4)
- 170.25 mm(2)
- 177.8 mm(4)
to
Corner Radius
Corner Radius
- 0.008 in(24)
- 0.012 in(14)
- 0.016 in(36)
- 0.031 in(28)
- 0.039 in(4)
- 0.041 in(4)
- 0.046 in(4)
- 0.047 in(8)
- 0.06 in(8)
- 0.061 in(8)
- 0.063 in(8)
- 0.065 in(8)
- 0.079 in(10)
- 0.081 in(10)
- 0.094 in(10)
- 0.096 in(10)
- 0.098 in(8)
- 0.1 in(8)
- 0.119 in(6)
- 0.12 in(6)
- 0.125 in(6)
- 0.128 in(6)
- 0.156 in(4)
- 0.157 in(4)
- 0.158 in(4)
- 0.159 in(4)
to
Corner Radius
Corner Radius
- 0.2 mm(24)
- 0.301 mm(14)
- 0.4 mm(36)
- 0.8 mm(28)
- 1.0 mm(4)
- 1.05 mm(4)
- 1.175 mm(4)
- 1.201 mm(8)
- 1.5 mm(8)
- 1.55 mm(8)
- 1.6 mm(8)
- 1.651 mm(8)
- 2.0 mm(10)
- 2.051 mm(10)
- 2.375 mm(10)
- 2.45 mm(10)
- 2.5 mm(8)
- 2.551 mm(8)
- 3.0 mm(6)
- 3.051 mm(6)
- 3.176 mm(6)
- 3.25 mm(6)
- 3.95 mm(4)
- 4.0 mm(4)
- 4.025 mm(4)
- 4.05 mm(4)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(42)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(42)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (42)
- KCK20B (42)
- KCM35B (30)
- KCP10B (42)
- KCP25B (42)
- KCP25C (42)
- KCS10B (30)
- KCU10 (42)
- KCU10B (42)
- KCU25 (42)
- KCU25B (42)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (84)
Clamp Style
Clamp Style
- Y (18)
Cutting Width
Cutting Width
- 0.063 in(2)
- 0.079 in(4)
- 0.084 in(4)
- 0.094 in(4)
- 0.095 in(4)
- 0.098 in(4)
- 0.119 in(8)
- 0.123 in(8)
- 0.125 in(8)
- 0.13 in(8)
- 0.157 in(10)
- 0.161 in(8)
- 0.162 in(10)
- 0.187 in(10)
- 0.188 in(10)
- 0.192 in(10)
- 0.197 in(8)
- 0.202 in(8)
- 0.237 in(6)
- 0.241 in(6)
- 0.25 in(6)
- 0.255 in(6)
- 0.276 in(6)
- 0.281 in(6)
- 0.289 in(6)
- 0.312 in(4)
- 0.315 in(4)
- 0.317 in(4)
- 0.32 in(4)
to
Cutting Width
Cutting Width
- 1.6 mm(2)
- 2.0 mm(4)
- 2.125 mm(4)
- 2.375 mm(4)
- 2.401 mm(4)
- 2.5 mm(4)
- 3.0 mm(8)
- 3.125 mm(8)
- 3.176 mm(8)
- 3.301 mm(8)
- 4.0 mm(10)
- 4.101 mm(8)
- 4.125 mm(10)
- 4.75 mm(10)
- 4.775 mm(10)
- 4.875 mm(10)
- 5.0 mm(8)
- 5.125 mm(8)
- 6.0 mm(6)
- 6.125 mm(6)
- 6.351 mm(6)
- 6.476 mm(6)
- 7.0 mm(6)
- 7.125 mm(6)
- 7.325 mm(6)
- 7.926 mm(4)
- 8.0 mm(4)
- 8.05 mm(4)
- 8.125 mm(4)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (84)
Insert Shape
Insert Shape
- PRISMATIC (42)
Cartridge Size
Cartridge Size
- 50 (32)
- 65 (10)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (84)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.473 in(10)
- 0.63 in(12)
- 0.866 in(4)
- 1.024 in(10)
- 1.26 in(6)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 12.0 mm(10)
- 16.0 mm(12)
- 22.0 mm(4)
- 26.0 mm(10)
- 32.0 mm(6)
to
Gage Length
Gage Length
- 6 in(4)
- 7 in(2)
- 1.102 in(2)
- 1.299 in(2)
- 1.496 in(2)
- 1.693 in(2)
- 1.85 in(6)
- 1.891 in(6)
- 1.929 in(4)
- 2.106 in(4)
- 2.185 in(2)
- 2.244 in(8)
- 2.283 in(8)
- 2.303 in(6)
- 2.382 in(2)
- 2.5 in(12)
- 2.579 in(2)
- 2.618 in(4)
- 2.697 in(4)
- 2.894 in(4)
- 3.426 in(2)
- 3.484 in(2)
- 5.439 in(2)
- 5.463 in(2)
- 5.482 in(2)
- 5.508 in(6)
- 5.529 in(6)
- 5.533 in(4)
- 5.906 in(2)
- 6.226 in(2)
- 6.25 in(2)
- 6.271 in(2)
- 6.534 in(2)
- 6.694 in(2)
Gage Length
Gage Length
- 57 mm(8)
- 58 mm(8)
- 47 mm(6)
- 48 mm(6)
- 49 mm(4)
- 150 mm(2)
- 170 mm(2)
- 28 mm(2)
- 33 mm(2)
- 38 mm(2)
- 43 mm(2)
- 87 mm(2)
- 53.5 mm(4)
- 55.5 mm(2)
- 58.5 mm(6)
- 60.5 mm(2)
- 63.5 mm(12)
- 65.5 mm(2)
- 66.5 mm(4)
- 68.5 mm(4)
- 73.5 mm(4)
- 88.5 mm(2)
- 138.15 mm(2)
- 138.75 mm(2)
- 139.25 mm(2)
- 139.9 mm(6)
- 140.4 mm(6)
- 140.55 mm(4)
- 152.4 mm(4)
- 158.15 mm(2)
- 158.75 mm(2)
- 159.25 mm(2)
- 165.951 mm(2)
- 177.8 mm(2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B L (40)
- H W (42)
Back-End
System Size
System Size
- KM40TS (4)
- KM4X100 (4)
- KM4X63 (8)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (8)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
Back-End Diameter
Back-End Diameter
- 40.0 mm(8)
- 50.0 mm(16)
- 63.0 mm(32)
- 80.0 mm(24)
- 100.0 mm(4)
to
Back-End Diameter
Back-End Diameter
- 1.575 in(8)
- 1.969 in(16)
- 2.48 in(32)
- 3.15 in(24)
- 3.938 in(4)
to
No filters matching ""
