Planeado
Fresado lateral/Fresado en escuadra: Bisel simplificado
Mango — Weldon cilíndricoDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 1023679 |
| Referencia ISO | KIPR046SD2645 |
| Referencia ANSI | KIPR046SD2645 |
| Diámetro de corte efectivo [D1] | 11.684 mm |
| Diámetro de corte efectivo [D1] | .46 in |
| Diámetro de corte máximo [D1MAX] | 22.783 mm |
| Diámetro de corte máximo [D1MAX] | .897 in |
| Adaptador/Mango/Diá int [D] | 12.7 mm |
| Adaptador/Mango/Diá int [D] | .5 in |
| Longitud total [L] | 76.2 mm |
| Longitud total [L] | 3 in |
| Longitud de cabeza [L2] | 29.725 mm |
| Longitud de cabeza [L2] | 1.189 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 4.99 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | .196 in |
| Número de plaquitas | 1 |
| RPM máx. | 11000 |
| Calibre de plaquita | SDEB2.61.52 |
PlaneadoFresado lateral/Fresado en escuadra: Bisel simplificadoMango — Weldon cilíndricoCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci |  | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci | | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KCPK30 |
| P3–P4 | SEHT | KC725M | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| P5–P6 | SEHT-T | KCPK30 | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| M1–M2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KCPK30 |
| M3 | SEHT | KC725M | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| K1–K2 | SEHW | KC520M | SEHW | KC520M | SEHW-T | KCPK30 |
| K3 | SEHW | KC520M | SEHW-T | KCPK30 | SEHW-T | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KC725M |
| S3 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KC725M |
| S4 | SEHT | KC725M | SEHT-T | KC725M | SEHT-T | KC725M |
| H1 | – | – | – | – | – | – |
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci | | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci | | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .004 | .015 | .030 | .003 | .011 | .022 | .003 | .009 | .019 | .003 | .009 | .018 | .002 | .009 | .017 | SDEB |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .005 | .018 | .037 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .022 | .003 | .011 | .021 | SDEB |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SEH. | .005 | .018 | .037 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .022 | .003 | .011 | .021 | SEH. |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .007 | .026 | .053 | .005 | .019 | .038 | .005 | .016 | .033 | .004 | .015 | .031 | .004 | .015 | .030 | SDEB |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Malzeme grubu | KC510M | KC520M | KC725M | KCK15 | KCPK30 | |||||||||||
| P | 1 | – | – | – | – | – | – | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
| 2 | – | – | – | – | – | – | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
| 3 | – | – | – | – | – | – | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
| 4 | – | – | – | – | – | – | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
| 5 | – | – | – | – | – | – | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
| 6 | – | – | – | – | – | – | 520 | 400 | 310 | – | – | – | 620 | 540 | - | |
| M | 1 | – | – | – | – | – | – | 670 | 590 | 540 | – | – | – | 820 | 720 | 620 |
| 2 | – | – | – | – | – | – | 610 | 520 | 430 | – | – | – | 730 | 640 | 550 | |
| 3 | – | – | – | – | – | – | 460 | 400 | 310 | – | – | – | 570 | 520 | 460 | |
| K | 1 | – | – | – | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
| 2 | – | – | – | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
| 3 | – | – | – | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Malzeme grubu | KC520M | KC725M | KCPK30 | |||||||
| P | 1 | – | – | – | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 520 | 400 | 310 | 620 | 540 | - | |
| M | 1 | – | – | – | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | 1060 | 960 | 850 | – | – | – | 1160 | 1050 | 940 |
| 2 | 830 | 740 | 700 | – | – | – | 920 | 830 | 760 | |
| 3 | 700 | 620 | 560 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?