Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3652896 |
| Referencia ISO | KF100WP0503C100L200 |
| Referencia ANSI | KF100WP0503C100L200 |
| Diámetro de corte efectivo [D1] | 25.4 mm |
| Diámetro de corte efectivo [D1] | 1 in |
| Adaptador/Mango/Diá int [D] | 25.4 mm |
| Adaptador/Mango/Diá int [D] | 1 in |
| Longitud total [L] | 140.8 mm |
| Longitud total [L] | 5.543 in |
| Longitud de cabeza [L2] | 50.8 mm |
| Longitud de cabeza [L2] | 2 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 1.016 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | .04 in |
| Número de plaquitas | 3 |
| Ángulo de vaciado máximo | 5 |
| Calibre de plaquita | WP..05X3. |
| Peso en libras | 1.08 |
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Material Group | Light | General | Heavy | |||
| (Light geometry) | (Strong geometry) | |||||
| wear |  | toughness | ||||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..GP | KC522M | .E..GP | KC522M | .S..HN | KC522M |
| P3–P4 | .E..GP | KC522M | .S..HN | KC522M | .S..HN | KC525M |
| P5–P6 | .E..GP | KC522M | .S..HN | KC522M | .S..HN | KC525M |
| M1–M2 | .E..GP | KC522M | .E..GP | KC525M | .S..HN | KC525M |
| M3 | .E..GP | KC522M | .E..GP | KC525M | .S..HN | KC525M |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..GP | KC522M | .E..GP | KC525M | – | – |
| S3 | .E..GP | KC522M | .E..GP | KC525M | – | – |
| S4 | .E..GP | KC522M | .E..GP | KC525M | – | – |
| H1 | – | – | .S..HN | KC522M | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GP | 0,34 | 1,23 | 2,49 | 0,26 | 0,91 | 1,83 | 0,22 | 0,79 | 1,59 | 0,21 | 0,74 | 1,48 | 0,21 | 0,73 | 1,45 | .E..GP |
| .S..HN | 0,34 | 1,23 | 2,49 | 0,26 | 0,91 | 1,83 | 0,22 | 0,79 | 1,59 | 0,21 | 0,74 | 1,48 | 0,21 | 0,73 | 1,45 | .S..HN |
| Light | General | Heavy |
| Insert | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert | ||||||||||||||
| Geometry | 10% | 20% | 30% | 40% | 50–100% | Geometry | ||||||||||
| .E..GP | 0,39 | 1,25 | 2,03 | 0,29 | 0,93 | 1,5 | 0,26 | 0,81 | 1,3 | 0,24 | 0,76 | 1,21 | 0,23 | 0,74 | 1,19 | .E..GP |
| .S..HN | 0,39 | 1,25 | 2,03 | 0,29 | 0,93 | 1,5 | 0,26 | 0,81 | 1,3 | 0,24 | 0,76 | 1,21 | 0,23 | 0,74 | 1,19 | .S..HN |
| Insert | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert | ||||||||||||||
| Geometry | 10% | 20% | 30% | 40% | 50–100% | Geometry | ||||||||||
| .E..GP | 0,55 | 1,96 | 4,02 | 0,41 | 1,45 | 2,92 | 0,36 | 1,26 | 2,53 | 0,33 | 1,18 | 2,35 | 0,33 | 1,15 | 2,3 | .E..GP |
| .S..HN | 0,55 | 1,96 | 4,02 | 0,41 | 1,45 | 2,92 | 0,36 | 1,26 | 2,53 | 0,33 | 1,18 | 2,35 | 0,33 | 1,15 | 2,3 | .S..HN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GP | .014 | .051 | .112 | .010 | .037 | .075 | .009 | .032 | .064 | .008 | .030 | .059 | .008 | .029 | .058 | .E..GP |
| .S..HN | .014 | .051 | .112 | .010 | .037 | .075 | .009 | .032 | .064 | .008 | .030 | .059 | .008 | .029 | .058 | .S..HN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GP | .022 | .085 | .220 | .016 | .059 | .124 | .014 | .051 | .103 | .013 | .047 | .094 | .013 | .046 | .092 | .E..GP |
| .S..HN | .022 | .085 | .220 | .016 | .059 | .124 | .014 | .051 | .103 | .013 | .047 | .094 | .013 | .046 | .092 | .S..HN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..GP | .016 | .052 | .087 | .012 | .037 | .060 | .010 | .032 | .052 | .010 | .030 | .048 | .009 | .029 | .047 | .E..GP |
| .S..HN | .016 | .052 | .087 | .012 | .037 | .060 | .010 | .032 | .052 | .010 | .030 | .048 | .009 | .029 | .047 | .S..HN |
| Material Group | KC522M | KC525M | |||||
| P | 1 | 395 | 345 | 325 | 260 | 240 | 215 |
| 2 | 330 | 290 | 240 | 215 | 190 | 180 | |
| 3 | 305 | 255 | 215 | 190 | 180 | 170 | |
| 4 | 270 | 225 | 180 | 170 | 160 | 145 | |
| 5 | 225 | 200 | 180 | 180 | 170 | 160 | |
| 6 | 200 | 150 | 120 | 160 | 145 | 130 | |
| M | 1 | 245 | 215 | 200 | 180 | 170 | 160 |
| 2 | 225 | 190 | 160 | 160 | 145 | 130 | |
| 3 | 170 | 145 | 115 | 110 | 95 | 85 | |
| K | 1 | 275 | 250 | 220 | – | – | – |
| 2 | 215 | 195 | 180 | – | – | – | |
| 3 | 180 | 160 | 145 | – | – | – | |
| N | 1–2 | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | |
| S | 1 | 50 | 45 | 35 | 75 | 65 | 60 |
| 2 | 50 | 45 | 35 | 75 | 65 | 60 | |
| 3 | 60 | 50 | 35 | 60 | 55 | 50 | |
| 4 | 85 | 60 | 45 | 75 | 60 | 50 | |
| H | 1 | 145 | 110 | 85 | – | – | – |
| Material Group | KC522M | KC525M | |||||
| P | 1 | 1300 | 1130 | 1060 | 860 | 790 | 710 |
| 2 | 1080 | 950 | 790 | 710 | 620 | 590 | |
| 3 | 1000 | 840 | 700 | 620 | 590 | 550 | |
| 4 | 890 | 730 | 590 | 550 | 520 | 470 | |
| 5 | 730 | 660 | 590 | 590 | 550 | 520 | |
| 6 | 650 | 490 | 400 | 520 | 470 | 430 | |
| M | 1 | 800 | 710 | 650 | 590 | 550 | 520 |
| 2 | 730 | 620 | 520 | 520 | 470 | 430 | |
| 3 | 550 | 480 | 370 | 360 | 310 | 280 | |
| K | 1 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | |
| S | 1 | 160 | 140 | 110 | 240 | 220 | 190 |
| 2 | 160 | 140 | 110 | 240 | 220 | 190 | |
| 3 | 200 | 160 | 110 | 190 | 180 | 160 | |
| 4 | 280 | 200 | 140 | 240 | 190 | 160 | |
| H | 1 | 470 | 360 | 280 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
