Fresado helicoidal
Rectificado en rampa: Material en bruto
Fresado lateral/Fresado en escuadra: Nariz de bola
Perfilado 3D
Mango — Weldon cilíndrico
Mango — Screw-On
Mecanizado de alojamientosDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 1888409 |
| Referencia ISO | 15E02R023M08SRD07 |
| Referencia ANSI | 15E02R023M08SRD07 |
| Diámetro de corte máximo [D1MAX] | 15 mm |
| Diámetro de corte máximo [D1MAX] | .5906 in |
| Diámetro de corte efectivo [D1] | 8 mm |
| Diámetro de corte efectivo [D1] | .315 in |
| Adaptador/Mango/Diá int [D] | 13 mm |
| Adaptador/Mango/Diá int [D] | .5118 in |
| Diámetro de cuerpo máximo [D2] | 13 mm |
| Diámetro de cuerpo máximo [D2] | .5118 in |
| Diámetro piloto Lateral de la máquina [DPM] | 8.5 mm |
| Diámetro piloto Lateral de la máquina [DPM] | .3346 in |
| Tamaño de rosca de conexión externo [G3X] | M8 |
| Longitud de cabeza [L2] | 23 mm |
| Longitud de cabeza [L2] | .9055 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 3.5 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | .1378 in |
| Número de plaquitas | 2 |
| Ángulo de vaciado máximo | 4.5 |
| Peso en libras | 0.07 |
| Calibre de plaquita | RD__0702__ |
Fresado helicoidalRectificado en rampa: Material en brutoFresado lateral/Fresado en escuadra: Nariz de bolaPerfilado 3DMango — Weldon cilíndricoMango — Screw-OnMecanizado de alojamientosCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .F..LP | KC522M | .F..LP | KC725M | .S..LN | KC725M |
| P3–P4 | .S..LN | KCPM20 | .S..LN | KC522M | .S..LN | KC725M |
| P5–P6 | .S..LN | KC510M | .S..LN | KCPM20 | .S..LN | KCPM20 |
| M1–M2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
| M3 | .F..LP | KC725M | – | – | – | – |
| K1–K2 | .F..LP | KC510M | .S..LN | KC510M | .S..LN | KC510M |
| K3 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KC510M |
| N1–N2 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| N3 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| S1–S2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
| S3 | .F..LP | KC725M | – | – | – | – |
| S4 | .F..LP | KC725M | – | – | – | – |
| H1 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KCPM20 |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,08 | 0,13 | 0,33 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,22 | 0,05 | 0,08 | 0,20 | 0,05 | 0,08 | 0,20 | .F..LP |
| .S..LN | 0,14 | 0,41 | 0,68 | 0,11 | 0,31 | 0,51 | 0,09 | 0,27 | 0,44 | 0,09 | 0,25 | 0,41 | 0,09 | 0,24 | 0,41 | .S..LN |
| .T..LN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .T..LN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,10 | 0,15 | 0,39 | 0,07 | 0,12 | 0,29 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,24 | 0,06 | 0,09 | 0,23 | .F..LP |
| .S..LN | 0,17 | 0,47 | 0,79 | 0,12 | 0,35 | 0,59 | 0,11 | 0,31 | 0,51 | 0,10 | 0,29 | 0,48 | 0,10 | 0,28 | 0,47 | .S..LN |
| .T..LN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,16 | 0,26 | 0,65 | 0,12 | 0,19 | 0,49 | 0,11 | 0,17 | 0,42 | 0,10 | 0,16 | 0,40 | 0,10 | 0,16 | 0,39 | .F..LP |
| .S..LN | 0,28 | 0,80 | 1,33 | 0,21 | 0,59 | 0,99 | 0,18 | 0,52 | 0,86 | 0,17 | 0,48 | 0,81 | 0,17 | 0,47 | 0,79 | .S..LN |
| .T..LN | 0,33 | 0,83 | 1,33 | 0,25 | 0,62 | 0,99 | 0,22 | 0,54 | 0,86 | 0,20 | 0,50 | 0,81 | 0,20 | 0,49 | 0,79 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,12 | 0,19 | 0,48 | 0,09 | 0,14 | 0,36 | 0,08 | 0,12 | 0,31 | 0,07 | 0,12 | 0,29 | 0,07 | 0,11 | 0,29 | .F..LP |
| .S..LN | 0,21 | 0,58 | 0,98 | 0,15 | 0,44 | 0,73 | 0,13 | 0,38 | 0,63 | 0,13 | 0,36 | 0,59 | 0,12 | 0,35 | 0,58 | .S..LN |
| .T..LN | 0,24 | 0,61 | 0,98 | 0,18 | 0,45 | 0,73 | 0,16 | 0,40 | 0,63 | 0,15 | 0,37 | 0,59 | 0,15 | 0,36 | 0,58 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .003 | .005 | .014 | .003 | .004 | .010 | .002 | .003 | .009 | .002 | .003 | .008 | .002 | .003 | .008 | .F..LP |
| .S..LN | .006 | .016 | .028 | .004 | .012 | .020 | .004 | .010 | .018 | .003 | .010 | .016 | .003 | .010 | .016 | .S..LN |
| .T..LN | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .T..LN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .007 | .011 | .028 | .005 | .008 | .021 | .005 | .007 | .018 | .004 | .007 | .017 | .004 | .007 | .017 | .F..LP |
| .S..LN | .012 | .034 | .059 | .009 | .025 | .042 | .008 | .022 | .036 | .007 | .020 | .034 | .007 | .020 | .033 | .S..LN |
| .T..LN | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .004 | .006 | .016 | .003 | .005 | .012 | .003 | .004 | .010 | .002 | .004 | .009 | .002 | .004 | .009 | .F..LP |
| .S..LN | .007 | .019 | .032 | .005 | .014 | .023 | .004 | .012 | .020 | .004 | .011 | .019 | .004 | .011 | .018 | .S..LN |
| .T..LN | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .005 | .008 | .021 | .004 | .006 | .015 | .003 | .005 | .013 | .003 | .005 | .012 | .003 | .005 | .012 | .F..LP |
| .S..LN | .009 | .025 | .042 | .006 | .018 | .031 | .006 | .016 | .027 | .005 | .015 | .025 | .005 | .015 | .024 | .S..LN |
| .T..LN | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .T..LN |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 440 | 360 | 310 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 270 | 225 | 190 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 245 | 205 | 170 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 185 | 160 | 130 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 255 | 205 | 175 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 150 | 125 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 285 | 235 | 200 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 260 | 220 | 185 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 195 | 160 | – | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 275 | 235 | 195 |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 220 | 180 | 160 | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 185 | 150 | 130 | |
| N | 1–2 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 695 | 640 | 585 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
| H | 1 | 190 | 155 | 110 | 145 | 110 | 85 | – | – | – | 170 | 140 | 115 | – | – | – |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1440 | 1180 | 1010 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 890 | 740 | 620 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 800 | 670 | 560 | |
| 4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 600 | 520 | 430 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 830 | 680 | 580 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 500 | 410 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 940 | 770 | 650 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 850 | 720 | 600 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 640 | 530 | – | |
| K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 910 | 770 | 640 |
| 2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 720 | 590 | 520 | |
| 3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 600 | 500 | 420 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | 630 | 510 | 360 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
