Taladrado
Fresado helicoidal
Vaciado
Rectificado en rampa: Material en bruto
Ranurado: Nariz de bola
Mango — Liso cilíndrico
Fresado — Con refrigeración interna
Mecanizado de alojamientosDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3578444 |
| Referencia ISO | KDMR1250S125MT16 |
| Referencia ANSI | KDMR1250S125MT16 |
| Diámetro de corte efectivo [D1] | 31.75 mm |
| Diámetro de corte efectivo [D1] | 1.25 in |
| Adaptador/Mango/Diá int [D] | 31.75 mm |
| Adaptador/Mango/Diá int [D] | 1.25 in |
| Longitud total [L] | 148.793 mm |
| Longitud total [L] | 5.858 in |
| Longitud de cabeza [L2] | 48.793 mm |
| Longitud de cabeza [L2] | 1.921 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 35.99 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | 1.417 in |
| 2.ª profundidad de corte máxima [AP2MAX] | 9.5 mm |
| 2.ª profundidad de corte máxima [AP2MAX] | .374 in |
| Número de plaquitas | 4 |
| Número de canales [Z] | 2 |
| KYC_CTLG_REF_ILLUS_NUM | FIG 3 |
| Calibre de plaquita | GOMT160408ERLD |
| Calibre de plaquita | JOMT160408ERLF |
| Peso en libras | 1.8 |
TaladradoFresado helicoidalVaciadoRectificado en rampa: Material en brutoRanurado: Nariz de bolaMango — Liso cilíndricoFresado — Con refrigeración internaMecanizado de alojamientosCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | .LD/.LF | KC720M | .LD/.LF | KC720M | .LD/.LF | KC720M |
| P3–P4 | .LD/.LF | KC720M | .LD/.LF | KC720M | .LD/.LF | KC720M |
| P5–P6 | .LD/.LF | KC720M | .LD/.LF | KC720M | .LD/.LF | KC720M |
| M1–M2 | .LD/.LF | KC720M | .LD/.LF | KC720M | .LD/.LF | KC720M |
| M3 | .LD/.LF | KC720M | .LD/.LF | KC720M | .LD/.LF | KC720M |
| K1–K2 | .LD/.LF | KC505M | .LD/.LF | KC505M | .LD/.LF | KC505M |
| K3 | .LD/.LF | KC505M | .LD/.LF | KC505M | .LD/.LF | KC505M |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .LD/.LF | 0,14 | 0,34 | 0,51 | 0,11 | 0,25 | 0,38 | 0,09 | 0,22 | 0,33 | 0,09 | 0,21 | 0,31 | 0,08 | 0,20 | 0,30 | .LD/.LF |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .LD/.LF | .006 | .014 | .020 | .004 | .010 | .015 | .004 | .009 | .013 | .003 | .008 | .012 | .003 | .008 | .012 | .LD/.LF |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| taladrado | |
| diámetro de corte | maximum depth (mm) |
| Ø 16 | 13 |
| Ø 17 | 13 |
| Ø 20 | 17 |
| Ø 21 | 17 |
| Ø 25 | 22 |
| Ø 26 | 22 |
| Ø 32 | 25 |
| Ø 33 | 25 |
| Ø 40 | 25 |
| Ø 50 | 25 |
| Drilled Hole Bottom Shape | ||||||
| diámetro de corte | Ø 16, Ø 17 | Ø 20, Ø 21 | Ø 25, Ø 26 | Ø 32, Ø 33 | Ø 40 | Ø 50 |
| A (mm) | 0,50 | 0,64 | 0,85 | 1,12 | 1,54 | 1,65 |
| end mill | applicable insert for each cutter diameter | |||
| D1 | side Insert | Cantidad | plaquita central | Cantidad |
| Ø 16 | JOMT08T208ERLF | 3 | GOMT08T208ERLD | 1 |
| Ø 17 | JOMT08T208ERLF | 3 | GOMT08T208ERLD | 1 |
| Ø 20 | JOMT100308ERLF | 3 | GOMT100308ERLD | 1 |
| Ø 21 | JOMT100308ERLF | 3 | GOMT100308ERLD | 1 |
| Ø 25 | JOMT13T308ERLF | 3 | GOMT13T308ERLD | 1 |
| Ø 26 | JOMT13T308ERLF | 3 | GOMT13T308ERLD | 1 |
| Ø 32 | JOMT160408ERLF | 3 | GOMT160408ERLD | 1 |
| Ø 33 | JOMT160408ERLF | 3 | GOMT160408ERLD | 1 |
| Ø 40 | JOMT13T308ERLF | 6 | GOMT13T308ERLD | 1 |
| Ø 50 | JOMT160408ERLF | 6 | GOMT160408ERLD | 1 |
| taladrado | |
| diámetro de corte | maximum depth (inch) |
| Ø .630 | .511 |
| Ø .787 | .511 |
| Ø 1.000 | .866 |
| Ø 1.250 | 1.000 |
| Ø 1.500 | 1.000 |
| Ø 1.984 | 1.000 |
| drilled hole bottom shape | ||||||
| diámetro de corte | Ø .630" | Ø .787" | Ø 1.000" | Ø 1.250" | Ø 1.500" | Ø 1.984" |
| A (inch) | .020" | .027" | .034" | .045" | .061" | .065" |
| end mill | applicable insert for each cutter diameter | |||
| D1 | side Insert | Cantidad | plaquita central | Cantidad |
| .630 | JOMT08T208ERLF | 3 | GOMT08T208ERLD | 1 |
| .787 | JOMT100308ERLF | 3 | GOMT100308ERLD | 1 |
| 1.000 | JOMT13T308ERLF | 3 | GOMT13T308ERLD | 1 |
| 1.250 | JOMT160408ERLF | 3 | GOMT160408ERLD | 1 |
| 1.500 | JOMT13T308ERLF | 6 | GOMT13T308ERLD | 1 |
| 1.984 | JOMT160408ERLF | 6 | GOMT160408ERLD | 1 |
| Grupo de materiales | KC505M | KC720M | |||||
| P | 1 | – | – | – | 260 | 240 | 215 |
| 2 | – | – | – | 240 | 215 | 190 | |
| 3 | – | – | – | 215 | 190 | 170 | |
| 4 | 360 | 260 | 215 | 190 | 180 | 170 | |
| 5 | 360 | 260 | 215 | 170 | 145 | 120 | |
| 6 | 350 | 240 | 190 | 120 | 95 | 95 | |
| M | 1 | – | – | – | 240 | 215 | 190 |
| 2 | – | – | – | 190 | 170 | 145 | |
| 3 | – | – | – | 145 | 120 | 95 | |
| K | 1 | 190 | 170 | 150 | – | – | – |
| 2 | 175 | 155 | 135 | – | – | – | |
| 3 | 115 | 95 | 75 | – | – | – | |
| N | 1–2 | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – |
| Grupo de materiales | KC505M | KC720M | |||||
| P | 1 | – | – | – | 860 | 790 | 710 |
| 2 | – | – | – | 790 | 710 | 630 | |
| 3 | – | – | – | 710 | 630 | 550 | |
| 4 | 1180 | 860 | 710 | 630 | 590 | 550 | |
| 5 | 1180 | 860 | 710 | 550 | 470 | 400 | |
| 6 | 1140 | 780 | 620 | 400 | 310 | 310 | |
| M | 1 | – | – | – | 780 | 710 | 630 |
| 2 | – | – | – | 630 | 550 | 470 | |
| 3 | – | – | – | 470 | 400 | 310 | |
| K | 1 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?