Taladrado
Taladrado: Entrada inclinada
Taladrado: Salida inclinada
Taladrado: Fondo plano
Taladrado: Convexo
Dimensiones de la herramienta: 2 canales/4 márgenes/refrigerante
Número DIN 6535
Número DIN 6537
Taladrado — Con refrigeración interna
Con refrigeración interna: MQL (cantidad mínima de lubricante): Taladrado
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
Estilo de esquina: Bisel en esquina
Estilo de esquina: Placa cuadrada
Profundidad de taladrado: 3x
Avellanado
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3885856 |
| Referencia ISO | B707A13500FBL |
| Referencia ANSI | B707A13500FBL |
| Calidad | KCMS15 |
| Diámetro de broca M [D1] | 13.5 mm |
| Diámetro de broca M [D1] | .5315 in |
| Longitud total [L] | 107 mm |
| Longitud total [L] | 4.212 in |
| Longitud del canal [L3] | 60 mm |
| Longitud del canal [L3] | 2.362 in |
| Profundidad máxima de taladrado [L4] | 43 mm |
| Profundidad máxima de taladrado [L4] | 1.692 in |
| Longitud de punta de broca [L5] | 0.44 mm |
| Longitud de punta de broca [L5] | .0173 in |
| Longitud de mango [LS] | 45 mm |
| Longitud de mango [LS] | 1.771 in |
| Adaptador/Mango/Diá int [D] | 14 mm |
| Adaptador/Mango/Diá int [D] | .5512 in |
TaladradoTaladrado: Entrada inclinadaTaladrado: Salida inclinadaTaladrado: Fondo planoTaladrado: ConvexoDimensiones de la herramienta: 2 canales/4 márgenes/refrigeranteNúmero DIN 6535Número DIN 6537Taladrado — Con refrigeración internaCon refrigeración interna: MQL (cantidad mínima de lubricante): TaladradoMango — Liso cilíndrico ≤h6Ángulo de la hélice: 30°Estilo de esquina: Bisel en esquinaEstilo de esquina: Placa cuadradaProfundidad de taladrado: 3xAvellanadoDrilling: Cross-Hole DrillingCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Tolerance • Inch | ||
| nominal size range | D1 tolerance m7 | D tolerance h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
| Tolerance • Metric | ||
| nominal size range | D1 tolerance m7 | D tolerance h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| short | long | extra long | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Material |  |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 5 | 45 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 6 | 40 | 50 | 60 | mm/r | 0,03–0,06 | 0,04–0,07 | 0,04–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 40 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 2 | 40 | 50 | 80 | mm/r | 0,06–0,11 | 0,07–0,11 | 0,08–0,16 | 0,12–0,20 | 0,13–0,21 | 0,16–0,22 | 0,18–0,24 | 0,21–0,26 | |
| 3 | 40 | 55 | 70 | mm/r | 0,03–0,04 | 0,03–0,05 | 0,04–0,06 | 0,04–0,07 | 0,05–0,08 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | |
| S | 1 | 20 | 25 | 30 | mm/r | 0,06–0,08 | 0,06–0,08 | 0,07–0,10 | 0,10–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,19 | 0,17–0,22 |
| 2 | 10 | 20 | 30 | mm/r | 0,05–0,07 | 0,05–0,07 | 0,06–0,08 | 0,08–0,11 | 0,09–0,12 | 0,10–0,13 | 0,12–0,16 | 0,14–0,18 | |
| 3 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| 4 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| Material | | | |||||||||||
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 5 | 150 | 160 | 200 | IPR | .002–.003 | .002–.004 | .002–.005 | .004–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.009 |
| 6 | 130 | 160 | 200 | IPR | .001–.002 | .002–.003 | .002–.004 | .003–.005 | .004–.006 | .004–.006 | .005–.007 | .006–.008 | |
| M | 1 | 130 | 160 | 200 | IPR | .002–.003 | .002–.004 | .002–.005 | .004–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.009 |
| 2 | 130 | 160 | 260 | IPR | .002–.004 | .003–.004 | .003–.006 | .005–.008 | .005–.008 | .006–.009 | .007–.009 | .008–.010 | |
| 3 | 130 | 180 | 230 | IPR | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.004 | .003–.004 | .003–.005 | |
| S | 1 | 70 | 80 | 100 | IPR | .002–.003 | .002–.003 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.008 | .007–.009 |
| 2 | 30 | 70 | 100 | IPR | .002–.003 | .002–.003 | .002–.003 | .003–.004 | .004–.005 | .004–.005 | .005–.006 | .006–.007 | |
| 3 | 100 | 110 | 160 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .002–.004 | .002–.004 | .003–.004 | .003–.005 | |
| 4 | 100 | 110 | 160 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .002–.004 | .002–.004 | .003–.004 | .003–.005 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 5 | 45 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 6 | 40 | 50 | 60 | mm/r | 0,03–0,06 | 0,04–0,07 | 0,04–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 40 | 50 | 60 | mm/r | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 2 | 40 | 50 | 80 | mm/r | 0,06–0,11 | 0,07–0,11 | 0,08–0,16 | 0,12–0,20 | 0,13–0,21 | 0,16–0,22 | 0,18–0,24 | 0,21–0,26 | |
| 3 | 40 | 55 | 70 | mm/r | 0,03–0,04 | 0,03–0,05 | 0,04–0,06 | 0,04–0,07 | 0,05–0,08 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | |
| S | 1 | 20 | 25 | 30 | mm/r | 0,06–0,08 | 0,06–0,08 | 0,07–0,10 | 0,10–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,19 | 0,17–0,22 |
| 2 | 10 | 20 | 30 | mm/r | 0,05–0,07 | 0,05–0,07 | 0,06–0,08 | 0,08–0,11 | 0,09–0,12 | 0,10–0,13 | 0,12–0,16 | 0,14–0,18 | |
| 3 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| 4 | 30 | 35 | 50 | mm/r | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?