Drilling: Stacked Plates
Corner Style: Corner Chamfer
Taladrado
Dimensiones de la herramienta: 2 canales/2 márgenes/refrigerante
Taladrado — Con refrigeración interna
Con refrigeración interna: MQL (cantidad mínima de lubricante): Taladrado
Mango — Liso cilíndrico ≤h6Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 6782257 |
| Referencia ISO | B225A12800HPX |
| Referencia ANSI | B225A12800HPX |
| Calidad | KCP15B |
| Diámetro de broca M [D1] | 12.8 mm |
| Diámetro de broca M [D1] | .5039 in |
| Longitud total [L] | 124 mm |
| Longitud total [L] | 4.881 in |
| Longitud del canal [L3] | 77 mm |
| Longitud del canal [L3] | 3.031 in |
| Profundidad máxima de taladrado [L4] | 60 mm |
| Profundidad máxima de taladrado [L4] | 2.362 in |
| Longitud de punta de broca [L5] | 2.68 mm |
| Longitud de punta de broca [L5] | .1055 in |
| Longitud de mango [LS] | 45 mm |
| Longitud de mango [LS] | 1.771 in |
| Adaptador/Mango/Diá int [D] | 14 mm |
| Adaptador/Mango/Diá int [D] | .5512 in |
Drilling: Stacked PlatesCorner Style: Corner ChamferTaladradoDimensiones de la herramienta: 2 canales/2 márgenes/refrigeranteTaladrado — Con refrigeración internaCon refrigeración interna: MQL (cantidad mínima de lubricante): TaladradoMango — Liso cilíndrico ≤h6Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| nominal size range | D1 tolerance m7 | D tolerance h6 |
| 1–3 | 0,002/0,012 | 0,000/-0,006 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 |
| nominal size range | D1 tolerance m7 | D tolerance h6 |
| .0394–.1181 | .0001/.0005 | .0000/-.0002 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 |
| Material |  |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 140 | 240 | 290 | mm/r | 0,13–0,24 | 0,14–0,26 | 0,15–0,30 | 0,17–0,34 | 0,19–0,38 | 0,21–0,42 | 0,24–0,50 | 0,28–0,58 |
| 1 | 130 | 240 | 290 | mm/r | 0,15–0,30 | 0,16–0,33 | 0,18–0,39 | 0,20–0,45 | 0,22–0,51 | 0,24–0,57 | 0,28–0,69 | 0,32–0,81 | |
| 2 | 190 | 230 | 270 | mm/r | 0,14–0,29 | 0,15–0,32 | 0,18–0,38 | 0,21–0,43 | 0,24–0,49 | 0,27–0,55 | 0,33–0,66 | 0,39–0,77 | |
| 3 | 130 | 160 | 190 | mm/r | 0,15–0,30 | 0,17–0,33 | 0,20–0,38 | 0,23–0,44 | 0,26–0,50 | 0,29–0,56 | 0,36–0,67 | 0,42–0,79 | |
| 4 | 110 | 150 | 170 | mm/r | 0,13–0,25 | 0,15–0,27 | 0,19–0,33 | 0,22–0,38 | 0,26–0,43 | 0,30–0,48 | 0,37–0,59 | 0,44–0,69 | |
| 5 | 70 | 90 | 110 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| 6 | 60 | 80 | 100 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| Material | | | |||||||||||
| Cutting Speed | Inch | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 0 | 460 | 790 | 950 | IPR | .005–.009 | .005–.010 | .006–.012 | .007–.013 | .008–.015 | .008–.017 | .010–.020 | .011–.023 |
| 1 | 430 | 790 | 950 | IPR | .006–.012 | .006–.013 | .007–.015 | .008–.018 | .009–.020 | .009–.022 | .011–.027 | .013–.032 | |
| 2 | 620 | 750 | 890 | IPR | .005–.012 | .006–.013 | .007–.015 | .008–.017 | .009–.019 | .011–.022 | .013–.026 | .015–.030 | |
| 3 | 430 | 520 | 620 | IPR | .006–.012 | .007–.013 | .008–.015 | .009–.017 | .010–.020 | .012–.022 | .014–.027 | .017–.031 | |
| 4 | 360 | 490 | 560 | IPR | .005–.010 | .006–.011 | .007–.013 | .009–.015 | .010–.017 | .012–.019 | .015–.023 | .017–.027 | |
| 5 | 230 | 300 | 360 | IPR | .004–.008 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .012–.020 | .014–.024 | |
| 6 | 200 | 260 | 330 | IPR | .004–.008 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .012–.020 | .014–.024 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 140 | 240 | 290 | mm/r | 0,13–0,24 | 0,14–0,26 | 0,15–0,30 | 0,17–0,34 | 0,19–0,38 | 0,21–0,42 | 0,24–0,50 | 0,28–0,58 |
| 1 | 130 | 240 | 290 | mm/r | 0,15–0,30 | 0,16–0,33 | 0,18–0,39 | 0,20–0,45 | 0,22–0,51 | 0,24–0,57 | 0,28–0,69 | 0,32–0,81 | |
| 2 | 190 | 230 | 270 | mm/r | 0,14–0,29 | 0,15–0,32 | 0,18–0,38 | 0,21–0,43 | 0,24–0,49 | 0,27–0,55 | 0,33–0,66 | 0,39–0,77 | |
| 3 | 130 | 160 | 190 | mm/r | 0,15–0,30 | 0,17–0,33 | 0,20–0,38 | 0,23–0,44 | 0,26–0,50 | 0,29–0,56 | 0,36–0,67 | 0,42–0,79 | |
| 4 | 110 | 150 | 170 | mm/r | 0,13–0,25 | 0,15–0,27 | 0,19–0,33 | 0,22–0,38 | 0,26–0,43 | 0,30–0,48 | 0,37–0,59 | 0,44–0,69 | |
| 5 | 70 | 90 | 110 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| 6 | 60 | 80 | 100 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| Material |  |  | |||||||||||
| Cutting Speed | Inch | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 0 | 230 | 430 | 490 | IPR | .006–.011 | .006–.012 | .007–.014 | .008–.016 | .009–.018 | .010–.020 | .011–.023 | .013–.027 |
| 1 | 230 | 430 | 490 | IPR | .007–.014 | .007–.015 | .008–.018 | .009–.021 | .010–.024 | .011–.027 | .013–.032 | .015–.038 | |
| 2 | 330 | 390 | 460 | IPR | .006–.014 | .007–.015 | .008–.018 | .010–.020 | .011–.023 | .013–.025 | .015–.031 | .018–.036 | |
| 3 | 230 | 300 | 330 | IPR | .007–.014 | .008–.015 | .009–.018 | .011–.021 | .012–.023 | .014–.026 | .017–.031 | .020–.037 | |
| 4 | 200 | 260 | 300 | IPR | .006–.012 | .007–.013 | .009–.015 | .010–.018 | .012–.020 | .014–.022 | .017–.027 | .020–.032 | |
| 5 | 130 | 160 | 200 | IPR | .005–.010 | .006–.011 | .007–.013 | .009–.015 | .010–.017 | .011–.020 | .014–.024 | .016–.028 | |
| 6 | 100 | 130 | 160 | IPR | .005–.010 | .006–.011 | .007–.013 | .009–.015 | .010–.017 | .011–.020 | .014–.024 | .016–.028 | |
| Material | | | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 70 | 130 | 150 | mm/r | 0,15–0,28 | 0,16–0,31 | 0,18–0,35 | 0,20–0,40 | 0,22–0,45 | 0,25–0,50 | 0,29–0,59 | 0,33–0,68 |
| 1 | 70 | 130 | 150 | mm/r | 0,18–0,35 | 0,19–0,39 | 0,21–0,46 | 0,24–0,53 | 0,26–0,60 | 0,28–0,67 | 0,33–0,81 | 0,38–0,96 | |
| 2 | 100 | 120 | 140 | mm/r | 0,16–0,35 | 0,18–0,38 | 0,21–0,45 | 0,25–0,51 | 0,28–0,58 | 0,32–0,64 | 0,39–0,78 | 0,46–0,91 | |
| 3 | 70 | 90 | 100 | mm/r | 0,18–0,35 | 0,19–0,38 | 0,23–0,45 | 0,27–0,52 | 0,31–0,59 | 0,35–0,66 | 0,42–0,80 | 0,50–0,93 | |
| 4 | 60 | 80 | 90 | mm/r | 0,16–0,29 | 0,18–0,32 | 0,22–0,38 | 0,26–0,45 | 0,31–0,51 | 0,35–0,57 | 0,43–0,69 | 0,52–0,81 | |
| 5 | 40 | 50 | 60 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| 6 | 30 | 40 | 50 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 70 | 130 | 150 | mm/r | 0,15–0,28 | 0,16–0,31 | 0,18–0,35 | 0,20–0,40 | 0,22–0,45 | 0,25–0,50 | 0,29–0,59 | 0,33–0,68 |
| 1 | 70 | 130 | 150 | mm/r | 0,18–0,35 | 0,19–0,39 | 0,21–0,46 | 0,24–0,53 | 0,26–0,60 | 0,28–0,67 | 0,33–0,81 | 0,38–0,96 | |
| 2 | 100 | 120 | 140 | mm/r | 0,16–0,35 | 0,18–0,38 | 0,21–0,45 | 0,25–0,51 | 0,28–0,58 | 0,32–0,64 | 0,39–0,78 | 0,46–0,91 | |
| 3 | 70 | 90 | 100 | mm/r | 0,18–0,35 | 0,19–0,38 | 0,23–0,45 | 0,27–0,52 | 0,31–0,59 | 0,35–0,66 | 0,42–0,80 | 0,50–0,93 | |
| 4 | 60 | 80 | 90 | mm/r | 0,16–0,29 | 0,18–0,32 | 0,22–0,38 | 0,26–0,45 | 0,31–0,51 | 0,35–0,57 | 0,43–0,69 | 0,52–0,81 | |
| 5 | 40 | 50 | 60 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| 6 | 30 | 40 | 50 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?