Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 1888193 |
| Referencia ISO | 125B08RS36PD12 |
| Referencia ANSI | 125B08RS36PD12 |
| Diámetro de corte máximo [D1MAX] | 125 mm |
| Diámetro de corte máximo [D1MAX] | 4.921 in |
| Diámetro de corte efectivo [D1] | 106.2 mm |
| Diámetro de corte efectivo [D1] | 4.181 in |
| Adaptador/Mango/Diá int [D] | 40 mm |
| Adaptador/Mango/Diá int [D] | 1.574 in |
| Diámetro de núcleo [D6] | 90 mm |
| Diámetro de núcleo [D6] | 3.543 in |
| Longitud total [L] | 55 mm |
| Longitud total [L] | 2.165 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 5.5 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | .2165 in |
| Número de plaquitas | 8 |
| Ángulo de vaciado máximo | 3 |
| Peso en kilogramos | 2.3 |
| Calibre de plaquita | PD_X1204__SNGN |
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| Geometri | Kalite | Geometri | Kalite | Geometri | Kalite | |
| P1 - P2 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P3 - P4 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P5 - P6 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| M1 - M2 | ||||||
| M3 | ||||||
| K1 - K2 | .S..GN | KC510M | .S..GN | KC510M | ||
| K3 | .S..GN | KC510M | .S..GN | KC510M | ||
| N1 - N2 | ||||||
| N3 | ||||||
| S1 - S2 | ||||||
| S3 | ||||||
| S4 | ||||||
| H1 | ||||||
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| Geometri | Kalite | Geometri | Kalite | Geometri | Kalite | |
| P1 - P2 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P3 - P4 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P5 - P6 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| M1 - M2 | ||||||
| M3 | ||||||
| K1 - K2 | .S..GN | KC510M | .S..GN | KC510M | ||
| K3 | .S..GN | KC510M | .S..GN | KC510M | ||
| N1 - N2 | ||||||
| N3 | ||||||
| S1 - S2 | ||||||
| S3 | ||||||
| S4 | ||||||
| H1 | ||||||
| Kesici uç geometrisi | Radyal kesme derinliği (ae) yüzdesi olarak programlanan diş başına ilerleme (fz) | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..GN | 0,29 | 0,73 | 1,17 | 0,22 | 0,54 | 0,87 | 0,19 | 0,47 | 0,76 | 0,18 | 0,44 | 0,71 | 0,17 | 0,43 | 0,69 | .S..GN |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Radyal kesme derinliği (ae) yüzdesi olarak programlanan diş başına ilerleme (fz) | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..GN | 0,19 | 0,47 | 0,75 | 0,14 | 0,35 | 0,56 | 0,12 | 0,30 | 0,49 | 0,11 | 0,28 | 0,45 | 0,11 | 0,28 | 0,44 | .S..GN |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Malzeme grubu | KC510M | KC522M | KC715M | KC725M | |||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 410 | 360 | 330 | 315 | 275 | 255 |
| 2 | – | – | – | 330 | 290 | 240 | 255 | 225 | 205 | 260 | 230 | 195 | |
| 3 | – | – | – | 305 | 255 | 215 | 225 | 205 | 185 | 240 | 205 | 170 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 170 | 160 | 145 | 215 | 180 | 145 | |
| 5 | – | – | – | 225 | 200 | 180 | 235 | 205 | 190 | 180 | 160 | 145 | |
| 6 | – | – | – | 200 | 150 | 120 | 145 | 125 | – | 160 | 120 | 95 | |
| M | 1 | – | – | – | 245 | 215 | 200 | 270 | 235 | 215 | 205 | 180 | 165 |
| 2 | – | – | – | 225 | 190 | 160 | – | – | – | 185 | 160 | 130 | |
| 3 | – | – | – | 170 | 145 | 115 | – | – | – | 140 | 120 | 95 | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | – | – | – |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | – | – | – | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?