Inserts

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (47)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(47)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(47)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(47)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(47)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(47)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(47)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(47)
    • M Stainless Steel (47)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(47)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(47)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(47)
    • K Cast Iron (47)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(47)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(47)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(47)
    • S High-Temp Alloys (7)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(7)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(7)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(7)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(7)
    • H Hardened Materials (40)
      • H1
        Hardened Materials 44-48 HRC(40)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (39)
    • OD Thread TurningOD Thread Turning (22)
    Type of Thread
    Type of Thread
    • BSW (7)
    • M (14)
    • NPS (2)
    • NPT (3)
    • NPTF (3)
    • UN (18)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (4)
    • 2.0 (43)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (7)
    • KC635M (40)
    Countersunk Angle
    Countersunk Angle
    • 27.5 (7)
    • 30.0 (40)
    Countersunk Angle MintoCountersunk Angle Max
    Front-End
    Cutting Width
    Cutting Width
    • 0.33 in(1)
    • 0.34 in(1)
    • 0.351 in(3)
    • 0.36 in(1)
    • 0.37 in(1)
    • 0.38 in(3)
    • 0.39 in(5)
    • 0.4 in(1)
    • 0.411 in(1)
    • 0.52 in(3)
    • 0.55 in(5)
    • 0.56 in(3)
    • 0.571 in(7)
    • 0.58 in(4)
    • 0.59 in(4)
    • 0.709 in(1)
    • 0.91 in(1)
    • 0.941 in(1)
    • 0.965 in(1)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 8.375 mm(1)
    • 8.625 mm(1)
    • 8.9 mm(3)
    • 9.15 mm(1)
    • 9.4 mm(1)
    • 9.65 mm(3)
    • 9.9 mm(5)
    • 10.15 mm(1)
    • 10.425 mm(1)
    • 13.201 mm(3)
    • 13.976 mm(5)
    • 14.226 mm(3)
    • 14.476 mm(7)
    • 14.726 mm(4)
    • 14.976 mm(4)
    • 18.0 mm(1)
    • 23.125 mm(1)
    • 23.875 mm(1)
    • 24.5 mm(1)
    Cutting Width MintoCutting Width Max
    Thread TPI
    Thread TPI
    • 11.0 (3)
    • 11.5 (3)
    • 12.0 (2)
    • 14.0 (8)
    • 16.0 (3)
    • 18.0 (5)
    • 19.0 (1)
    • 20.0 (3)
    • 24.0 (3)
    • 27.0 (1)
    • 32.0 (1)
    Thread TPI MintoThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.75 mm(1)
    • 1.0 mm(3)
    • 1.25 mm(1)
    • 1.5 mm(4)
    • 1.75 mm(1)
    • 2.0 mm(2)
    • 3.0 mm(1)
    • 3.5 mm(1)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.03 in(1)
    • 0.039 in(3)
    • 0.049 in(1)
    • 0.06 in(4)
    • 0.069 in(1)
    • 0.079 in(2)
    • 0.119 in(1)
    • 0.138 in(1)
    Thread Pitch MintoThread Pitch Max
    Insert Geometry
    Insert IC Size
    Insert IC Size
    • 6.0 mm(6)
    • 6.351 mm(11)
    • 9.525 mm(26)
    • 12.701 mm(1)
    • 15.875 mm(3)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.237 in(6)
    • 0.25 in(11)
    • 0.375 in(26)
    • 0.5 in(1)
    • 0.625 in(3)
    Insert IC Size MintoInsert IC Size Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?