KSEM™ ST-Line • Bodies

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (26)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(26)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(26)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(26)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(26)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(26)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(26)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(26)
    • M Stainless Steel (26)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(26)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(26)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(26)
    • K Cast Iron (26)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(26)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(26)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(26)
    • N Non-Ferrous Materials (26)
      • N1
        Wrought Aluminum (26)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(26)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (26)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (26)
      • N6
        Carbon, Graphite Composites, CFRP (26)
      • N7
        MMC's (26)
    • S High-Temp Alloys (26)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(26)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(26)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(26)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(26)
    Applications
    Applications
    • DrillingDrilling (26)
    • Stacked Plates DrillingStacked Plates Drilling (26)
    Cutting Diameter
    Cutting Diameter
    • 0.492 in(1)
    • 0.496 in(1)
    • 0.5 in(1)
    • 0.504 in(1)
    • 0.509 in(1)
    • 0.512 in(1)
    • 0.516 in(1)
    • 0.52 in(1)
    • 0.531 in(1)
    • 0.535 in(1)
    • 0.539 in(1)
    • 0.543 in(1)
    • 0.547 in(1)
    • 0.551 in(2)
    • 0.555 in(1)
    • 0.557 in(1)
    • 0.559 in(1)
    • 0.564 in(1)
    • 0.568 in(1)
    • 0.572 in(1)
    • 0.576 in(1)
    • 0.578 in(1)
    • 0.583 in(1)
    • 0.591 in(1)
    • 0.594 in(1)
    • 0.602 in(1)
    • 0.609 in(1)
    • 0.61 in(1)
    • 0.614 in(1)
    • 0.618 in(1)
    • 0.622 in(1)
    • 0.625 in(1)
    • 0.63 in(3)
    • 0.632 in(1)
    • 0.634 in(1)
    • 0.636 in(1)
    • 0.638 in(1)
    • 0.641 in(1)
    • 0.65 in(1)
    • 0.654 in(1)
    • 0.656 in(1)
    • 0.669 in(3)
    • 0.672 in(1)
    • 0.683 in(1)
    • 0.687 in(1)
    • 0.69 in(1)
    • 0.694 in(1)
    • 0.698 in(1)
    • 0.7 in(1)
    • 0.702 in(1)
    • 0.704 in(1)
    • 0.705 in(1)
    • 0.709 in(3)
    • 0.719 in(1)
    • 0.72 in(1)
    • 0.724 in(1)
    • 0.728 in(1)
    • 0.732 in(1)
    • 0.734 in(1)
    • 0.74 in(1)
    • 0.744 in(1)
    • 0.748 in(2)
    • 0.75 in(1)
    • 0.756 in(1)
    • 0.757 in(1)
    • 0.758 in(1)
    • 0.759 in(1)
    • 0.761 in(1)
    • 0.762 in(1)
    • 0.763 in(1)
    • 0.766 in(1)
    • 0.768 in(1)
    • 0.774 in(1)
    • 0.776 in(1)
    • 0.781 in(1)
    • 0.787 in(3)
    • 0.788 in(1)
    • 0.791 in(1)
    • 0.797 in(1)
    • 0.801 in(1)
    • 0.807 in(1)
    • 0.814 in(1)
    • 0.816 in(1)
    • 0.828 in(3)
    • 0.832 in(1)
    • 0.833 in(1)
    • 0.835 in(1)
    • 0.84 in(1)
    • 0.844 in(1)
    • 0.846 in(1)
    • 0.854 in(1)
    • 0.859 in(1)
    • 0.866 in(3)
    • 0.87 in(1)
    • 0.872 in(1)
    • 0.875 in(1)
    • 0.884 in(1)
    • 0.886 in(1)
    • 0.891 in(1)
    • 0.897 in(1)
    • 0.906 in(3)
    • 0.907 in(1)
    • 0.909 in(1)
    • 0.915 in(1)
    • 0.917 in(1)
    • 0.922 in(1)
    • 0.925 in(1)
    • 0.929 in(1)
    • 0.933 in(1)
    • 0.937 in(1)
    • 0.946 in(3)
    • 0.958 in(1)
    • 0.965 in(1)
    • 0.969 in(1)
    • 0.972 in(1)
    • 0.984 in(3)
    • 0.987 in(1)
    • 0.994 in(1)
    • 0.996 in(1)
    • 1.0 in(1)
    • 1.004 in(1)
    • 1.006 in(1)
    • 1.008 in(1)
    • 1.01 in(1)
    • 1.012 in(1)
    • 1.014 in(1)
    • 1.016 in(1)
    • 1.024 in(3)
    • 1.032 in(1)
    • 1.035 in(1)
    • 1.043 in(1)
    • 1.044 in(1)
    • 1.047 in(1)
    • 1.051 in(1)
    • 1.063 in(2)
    • 1.083 in(1)
    • 1.094 in(1)
    • 1.102 in(2)
    • 1.106 in(1)
    • 1.109 in(1)
    • 1.116 in(1)
    • 1.122 in(1)
    • 1.125 in(1)
    • 1.143 in(2)
    • 1.156 in(1)
    • 1.161 in(1)
    • 1.163 in(1)
    • 1.17 in(1)
    • 1.172 in(1)
    • 1.181 in(2)
    • 1.187 in(1)
    • 1.201 in(1)
    • 1.203 in(1)
    • 1.219 in(1)
    • 1.22 in(2)
    • 1.226 in(1)
    • 1.23 in(1)
    • 1.24 in(1)
    • 1.25 in(1)
    • 1.26 in(2)
    • 1.268 in(1)
    • 1.274 in(1)
    • 1.28 in(1)
    • 1.282 in(1)
    • 1.297 in(1)
    • 1.299 in(2)
    • 1.313 in(1)
    • 1.315 in(1)
    • 1.319 in(1)
    • 1.328 in(1)
    • 1.339 in(2)
    • 1.344 in(1)
    • 1.358 in(1)
    • 1.375 in(1)
    • 1.379 in(2)
    • 1.399 in(1)
    • 1.407 in(1)
    • 1.417 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.5 mm(1)
    • 12.601 mm(1)
    • 12.701 mm(1)
    • 12.8 mm(1)
    • 12.925 mm(1)
    • 13.0 mm(1)
    • 13.101 mm(1)
    • 13.201 mm(1)
    • 13.5 mm(1)
    • 13.601 mm(1)
    • 13.701 mm(1)
    • 13.8 mm(1)
    • 13.9 mm(1)
    • 14.0 mm(2)
    • 14.101 mm(1)
    • 14.15 mm(1)
    • 14.201 mm(1)
    • 14.3 mm(1)
    • 14.4 mm(1)
    • 14.5 mm(1)
    • 14.601 mm(1)
    • 14.675 mm(1)
    • 14.8 mm(1)
    • 15.0 mm(1)
    • 15.076 mm(1)
    • 15.3 mm(1)
    • 15.476 mm(1)
    • 15.5 mm(1)
    • 15.601 mm(1)
    • 15.701 mm(1)
    • 15.8 mm(1)
    • 15.875 mm(1)
    • 16.0 mm(3)
    • 16.05 mm(1)
    • 16.1 mm(1)
    • 16.151 mm(1)
    • 16.2 mm(1)
    • 16.276 mm(1)
    • 16.5 mm(1)
    • 16.6 mm(1)
    • 16.675 mm(1)
    • 17.0 mm(3)
    • 17.075 mm(1)
    • 17.35 mm(1)
    • 17.45 mm(1)
    • 17.5 mm(1)
    • 17.6 mm(1)
    • 17.7 mm(1)
    • 17.75 mm(1)
    • 17.8 mm(1)
    • 17.85 mm(1)
    • 17.901 mm(1)
    • 18.0 mm(3)
    • 18.25 mm(1)
    • 18.3 mm(1)
    • 18.401 mm(1)
    • 18.5 mm(1)
    • 18.6 mm(1)
    • 18.651 mm(1)
    • 18.8 mm(1)
    • 18.901 mm(1)
    • 19.0 mm(2)
    • 19.05 mm(1)
    • 19.201 mm(1)
    • 19.225 mm(1)
    • 19.25 mm(1)
    • 19.276 mm(1)
    • 19.326 mm(1)
    • 19.35 mm(1)
    • 19.375 mm(1)
    • 19.451 mm(1)
    • 19.5 mm(1)
    • 19.651 mm(1)
    • 19.701 mm(1)
    • 19.85 mm(1)
    • 20.0 mm(3)
    • 20.026 mm(1)
    • 20.1 mm(1)
    • 20.25 mm(1)
    • 20.35 mm(1)
    • 20.5 mm(1)
    • 20.651 mm(1)
    • 20.701 mm(1)
    • 21.0 mm(3)
    • 21.1 mm(1)
    • 21.151 mm(1)
    • 21.201 mm(1)
    • 21.326 mm(1)
    • 21.425 mm(1)
    • 21.5 mm(1)
    • 21.701 mm(1)
    • 21.826 mm(1)
    • 22.0 mm(3)
    • 22.1 mm(1)
    • 22.151 mm(1)
    • 22.225 mm(1)
    • 22.451 mm(1)
    • 22.5 mm(1)
    • 22.625 mm(1)
    • 22.776 mm(1)
    • 23.0 mm(3)
    • 23.05 mm(1)
    • 23.1 mm(1)
    • 23.25 mm(1)
    • 23.3 mm(1)
    • 23.425 mm(1)
    • 23.5 mm(1)
    • 23.6 mm(1)
    • 23.701 mm(1)
    • 23.8 mm(1)
    • 24.0 mm(3)
    • 24.3 mm(1)
    • 24.5 mm(1)
    • 24.6 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(3)
    • 25.076 mm(1)
    • 25.25 mm(1)
    • 25.3 mm(1)
    • 25.401 mm(1)
    • 25.5 mm(1)
    • 25.55 mm(1)
    • 25.6 mm(1)
    • 25.651 mm(1)
    • 25.675 mm(1)
    • 25.725 mm(1)
    • 25.75 mm(1)
    • 25.8 mm(1)
    • 26.0 mm(3)
    • 26.201 mm(1)
    • 26.3 mm(1)
    • 26.5 mm(1)
    • 26.526 mm(1)
    • 26.6 mm(1)
    • 26.701 mm(1)
    • 27.0 mm(2)
    • 27.5 mm(1)
    • 27.776 mm(1)
    • 28.0 mm(2)
    • 28.1 mm(1)
    • 28.175 mm(1)
    • 28.35 mm(1)
    • 28.5 mm(1)
    • 28.576 mm(1)
    • 29.0 mm(2)
    • 29.375 mm(1)
    • 29.5 mm(1)
    • 29.55 mm(1)
    • 29.725 mm(1)
    • 29.776 mm(1)
    • 30.0 mm(2)
    • 30.151 mm(1)
    • 30.5 mm(1)
    • 30.55 mm(1)
    • 30.951 mm(1)
    • 31.0 mm(2)
    • 31.151 mm(1)
    • 31.25 mm(1)
    • 31.5 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 32.2 mm(1)
    • 32.35 mm(1)
    • 32.5 mm(1)
    • 32.551 mm(1)
    • 32.95 mm(1)
    • 33.0 mm(2)
    • 33.35 mm(1)
    • 33.4 mm(1)
    • 33.5 mm(1)
    • 33.725 mm(1)
    • 34.0 mm(2)
    • 34.125 mm(1)
    • 34.5 mm(1)
    • 34.926 mm(1)
    • 35.0 mm(2)
    • 35.5 mm(1)
    • 35.725 mm(1)
    • 36.0 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 50.0 mm(2)
    • 61.5 mm(2)
    • 62.0 mm(1)
    • 62.5 mm(3)
    • 63.0 mm(1)
    • 63.5 mm(1)
    • 64.0 mm(2)
    • 72.5 mm(1)
    • 73.0 mm(2)
    • 73.5 mm(1)
    • 74.0 mm(3)
    • 74.5 mm(1)
    • 83.0 mm(1)
    • 83.5 mm(2)
    • 84.0 mm(2)
    • 84.5 mm(1)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.969 in(2)
    • 2.422 in(2)
    • 2.441 in(1)
    • 2.461 in(3)
    • 2.48 in(1)
    • 2.5 in(1)
    • 2.52 in(2)
    • 2.854 in(1)
    • 2.874 in(2)
    • 2.894 in(1)
    • 2.914 in(3)
    • 2.934 in(1)
    • 3.269 in(1)
    • 3.287 in(2)
    • 3.307 in(2)
    • 3.327 in(1)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 2.445 in(1)
    • 2.488 in(1)
    • 3.063 in(1)
    • 3.079 in(1)
    • 3.114 in(1)
    • 3.146 in(1)
    • 3.157 in(1)
    • 3.173 in(1)
    • 3.205 in(1)
    • 3.217 in(1)
    • 3.244 in(1)
    • 3.291 in(1)
    • 3.787 in(1)
    • 3.815 in(1)
    • 3.85 in(1)
    • 3.862 in(1)
    • 3.878 in(1)
    • 3.89 in(1)
    • 3.906 in(1)
    • 3.966 in(1)
    • 4.421 in(1)
    • 4.48 in(1)
    • 4.496 in(1)
    • 4.532 in(1)
    • 4.555 in(1)
    • 4.559 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 62.1 mm(1)
    • 63.2 mm(1)
    • 77.801 mm(1)
    • 78.2 mm(1)
    • 79.101 mm(1)
    • 79.9 mm(1)
    • 80.2 mm(1)
    • 80.601 mm(1)
    • 81.4 mm(1)
    • 81.7 mm(1)
    • 82.4 mm(1)
    • 83.601 mm(1)
    • 96.2 mm(1)
    • 96.9 mm(1)
    • 97.801 mm(1)
    • 98.101 mm(1)
    • 98.5 mm(1)
    • 98.801 mm(1)
    • 99.2 mm(1)
    • 100.7 mm(1)
    • 112.301 mm(1)
    • 113.801 mm(1)
    • 114.2 mm(1)
    • 115.101 mm(1)
    • 115.7 mm(1)
    • 115.801 mm(1)
    Reach MintoReach Max
    Over All Length [L]
    Over All Length [L]
    • 5.827 in(2)
    • 6.694 in(10)
    • 7.795 in(8)
    • 8.74 in(6)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 148.0 mm(2)
    • 170.0 mm(10)
    • 198.0 mm(8)
    • 222.0 mm(6)
    Over All Length [L] MintoOver All Length [L] Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC7030 (20)
    • KC7135 (25)
    • KC7215 (1)
    • KC7235 (26)
    • KC7315 (26)
    • KC7320 (3)
    • KC7410 (25)
    • KCMS15 (26)
    • KCMS35 (25)
    • KCPM45 (26)
    • YYMISF (1)
    Front-End
    Point Angle
    Point Angle
    • 140.0 (26)
    • 150.0 (25)
    • 180.0 (25)
    Point Angle MintoPoint Angle Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(2)
    • 20.0 mm(10)
    • 25.0 mm(8)
    • 32.0 mm(6)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(2)
    • 0.787 in(10)
    • 0.984 in(8)
    • 1.26 in(6)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?