Mill 1-7™ Shoulder Mills
Mill 1-7 high-performance shoulder mills and inserts are the perfect solution for small component machining. They can be used across a broad range of milling applications including facing, ramping, slotting, and plunging. Mill 1-7 shoulder mill cutters are available in inch and metric measurements and can be used in finishing and roughing applications. Inserts are available with two cutting edges in the Mill 1-7 series. They enable the use of higher-density cutters rather than larger inserts, providing greater feed and higher metal removal rates. They are pressed-to-size, for the lowest cost per cutting edge. The Mil 1-7 inserts have a super positive rake which provides soft action and low cutting forces for smooth entry and exit from the component. Inserts are designed with elliptical cutting edges and are optimized with a straight 90° wall.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (12)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- M Stainless Steel (12)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
- K Cast Iron (9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(11)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(11)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(11)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
- H Hardened Materials (9)
- H1Hardened Materials 44-48 HRC(9)
Applications
Applications
Face Milling (7)
Pocket (7)
Pocket Helical (7)
Pocket Milling (7)
Ramping (7)
Shoulder Milling (7)
Slot Milling (7)
Slot Square End (7)
Cutting Diameter
Cutting Diameter
- 0.468 in(1)
- 0.473 in(1)
- 0.496 in(1)
- 0.62 in(1)
- 0.63 in(1)
- 0.745 in(1)
- 0.787 in(1)
to
Cutting Diameter
Cutting Diameter
- 11.875 mm(1)
- 12.0 mm(1)
- 12.601 mm(1)
- 15.75 mm(1)
- 16.0 mm(1)
- 18.925 mm(1)
- 20.0 mm(1)
to
Cutting Length
Cutting Length
- 6.926 mm(2)
- 6.95 mm(3)
- 6.976 mm(2)
to
Cutting Length
Cutting Length
- 0.273 in(2)
- 0.274 in(3)
- 0.275 in(2)
to
Reach
Reach
- 0.709 in(1)
- 0.75 in(1)
- 0.787 in(3)
- 1.0 in(2)
to
Reach
Reach
- 18.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(3)
- 25.401 mm(2)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (7)
to
Connection Style
Connection Style
- Screw-On Connection (1)
- Straight-Cylindrical (6)
Number of Flutes
Number of Flutes
- 2 (3)
- 3 (2)
- 5 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.484 in(1)
- 3.938 in(2)
- 4.0 in(1)
- 4.331 in(1)
- 5.0 in(1)
- 6.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 37.7 mm(1)
- 100.0 mm(2)
- 101.601 mm(1)
- 110.0 mm(1)
- 127.0 mm(1)
- 152.4 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC522M (8)
- KC725M (8)
- KCPK30 (8)
- KCPM40 (8)
- KCSM30 (8)
Hand Of Tool
Hand Of Tool
- R (7)
Wiper Insert
Wiper Insert
- N (5)
Maximum Ramp Angle
Maximum Ramp Angle
- 2.01 (1)
- 2.17 (1)
- 2.92 (1)
- 2.97 (1)
- 4.59 (1)
- 5.18 (2)
to
Front-End
Neck Diameter
Neck Diameter
- 0.414 in(1)
- 0.455 in(1)
- 0.586 in(1)
- 0.595 in(1)
- 0.704 in(1)
- 0.74 in(1)
to
Neck Diameter
Neck Diameter
- 10.5 mm(1)
- 11.55 mm(1)
- 14.875 mm(1)
- 15.101 mm(1)
- 17.85 mm(1)
- 18.8 mm(1)
to
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
- X-PARALLELOGRAM 75 (5)
Cutting Edge Length
Cutting Edge Length
- 7.125 mm(5)
to
Cutting Edge Length
Cutting Edge Length
- 0.281 in(5)
to
Chip Breaker CBMD
Chip Breaker CBMD
- GE (5)
Cutting Tool Material
Cutting Tool Material
- H W (5)
Tolerance Class
Tolerance Class
- P (5)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (6)
- SCREW-ON (1)
Back-End Diameter
Back-End Diameter
- 12.0 mm(1)
- 12.701 mm(1)
- 13.0 mm(1)
- 15.875 mm(1)
- 16.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.473 in(1)
- 0.5 in(1)
- 0.512 in(1)
- 0.625 in(1)
- 0.63 in(1)
- 0.75 in(1)
- 0.787 in(1)
to
No filters matching ""
