Welcome
Please confirm your preferences
Update Preferences

Product Suggestions

Product Family suggestions

Contact a Kennametal Expert

Customer Support

Find customer support centers around the globe.

Quick Order
Item(s) successfully added to cart
View Cart
Mill more, for less with our limited-time offers! Shop Now

Cartridges

Select Filters
Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (2)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
    • M Stainless Steel (2)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
    • K Cast Iron (2)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
    • N Non-Ferrous Materials (2)
      • N1
        Wrought Aluminum (2)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
      • N6
        Carbon, Graphite Composites, CFRP (2)
    • S High-Temp Alloys (2)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
    • H Hardened Materials (2)
      • H1
        Hardened Materials 44-48 HRC(2)
      • H2
        Hardened Materials 48-55 HRC(2)
    Applications
    Applications
    • Face GroovingFace Grooving (2)
    • GroovingGrooving (2)
    • ThreadingThreading (2)
    Type of Thread
    Type of Thread
    • 60 (2)
    • BUTTRESS (2)
    • M (1)
    • UN (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (2)
    • Lightly Interrupted Cut (2)
    • Smooth Cut (2)
    • Varying Depth of Cut (2)
    Over All Length [L]
    Over All Length [L]
    • 2.165 in(1)
    • 2.192 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 55.0 mm(1)
    • 55.676 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.003 in(2)
    • 0.004 in(2)
    • 0.007 in(1)
    • 0.008 in(2)
    • 0.01 in(1)
    • 0.02 in(2)
    • 0.03 in(2)
    • 0.031 in(2)
    • 0.039 in(2)
    • 0.047 in(2)
    • 0.049 in(2)
    • 0.06 in(2)
    • 0.063 in(2)
    • 0.069 in(2)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(2)
    • 0.1 mm(2)
    • 0.176 mm(1)
    • 0.2 mm(2)
    • 0.25 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(2)
    • 0.775 mm(2)
    • 1.0 mm(2)
    • 1.201 mm(2)
    • 1.25 mm(2)
    • 1.5 mm(2)
    • 1.6 mm(2)
    • 1.75 mm(2)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (2)
    • K313 (2)
    • K420 (2)
    • K4H (1)
    • K68 (2)
    • KC250 (2)
    • KC5010 (2)
    • KC5025 (2)
    • KC5410 (2)
    • KC710 (2)
    • KC720 (2)
    • KC722 (2)
    • KC730 (2)
    • KC810 (2)
    • KC850 (2)
    • KC910 (1)
    • KC9110 (2)
    • KC9320 (2)
    • KC935 (2)
    • KC950 (2)
    • KCK20 (1)
    • KCK20B (2)
    • KCP10B (2)
    • KCP25B (2)
    • KCU10 (2)
    • KCU10B (2)
    • KCU25 (2)
    • KT175 (2)
    • KT315 (2)
    • KU10T (2)
    • KU25T (2)
    • KU30T (2)
    Front-End
    Cutting Width
    Cutting Width
    • 0.02 in(2)
    • 0.031 in(2)
    • 0.035 in(2)
    • 0.039 in(2)
    • 0.041 in(2)
    • 0.047 in(2)
    • 0.055 in(2)
    • 0.058 in(2)
    • 0.06 in(2)
    • 0.062 in(2)
    • 0.067 in(2)
    • 0.069 in(2)
    • 0.077 in(2)
    • 0.079 in(2)
    • 0.088 in(2)
    • 0.089 in(2)
    • 0.095 in(2)
    • 0.098 in(2)
    • 0.108 in(2)
    • 0.119 in(2)
    • 0.125 in(2)
    • 0.126 in(2)
    • 0.128 in(2)
    • 0.129 in(2)
    • 0.138 in(2)
    • 0.147 in(1)
    • 0.15 in(1)
    • 0.151 in(1)
    • 0.152 in(2)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(2)
    • 0.775 mm(2)
    • 0.8 mm(2)
    • 0.9 mm(2)
    • 1.0 mm(2)
    • 1.05 mm(2)
    • 1.201 mm(2)
    • 1.401 mm(2)
    • 1.475 mm(2)
    • 1.5 mm(2)
    • 1.576 mm(2)
    • 1.701 mm(2)
    • 1.75 mm(2)
    • 1.951 mm(2)
    • 2.0 mm(2)
    • 2.2 mm(2)
    • 2.225 mm(2)
    • 2.25 mm(2)
    • 2.401 mm(2)
    • 2.5 mm(2)
    • 2.75 mm(2)
    • 3.0 mm(2)
    • 3.176 mm(2)
    • 3.2 mm(2)
    • 3.25 mm(2)
    • 3.276 mm(2)
    • 3.5 mm(2)
    • 3.725 mm(1)
    • 3.801 mm(1)
    • 3.825 mm(1)
    • 3.85 mm(2)
    Cutting Width MintoCutting Width Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • H T (2)
    • H W (2)
    No filters matching ""

    NE-CA

    (2)NE-CA
    You are about to add to your My Solutions page. Do you want to proceed?
    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?