Tech Tip: Coatings for Solid Carbide End Mills

Improving the performance of an end mill is a crucial element for getting the best out of your machining operations. By understanding the types of grades and coatings to use, you’ll save time and reduce costs. Designed with several chemical compositions for use on specific materials, we have listed general coatings and Kennametal propriety coatings and grades for milling.

General Milling Coatings

For maximum performance and Metal Removal Rates (MMR), selecting the proper coating depends on on workpiece material and application.   

Titanium Nitride (TiN) coatings are used for general-purpose milling operations in softer materials. The coating offers high surface lubricity, reduces friction, and increases chip flow.  The resistance in heat and hardness allows the tool to run about 20-30% higher machining speeds than uncoated end mills. 

Titanium Carbonitride (TiCN) is harder than Titanium Nitride (TiN) at low cutting temperatures. It features good abrasion resistance and is very good in milling applications for steels, stainless steels, and non-ferrous materials. End mills coated with TiCN should be operated at speeds up to 50% higher than uncoated mills. If process temperatures get too high hardess drops significantly.

Titanium Aluminum Nitride (TiAlN) coatings are high-performance coatings used for all types of materials. It is about the same hardness as Titanium Carbonitride (TiCN,) but maintains hardness at much higher cutting temperatures. This makes TiAlN very effective in high-temperature alloys, high-speed machining, and dry milling applications. End mills coated with TiAlN have a high resistance to heat and oxidation and should be operated at speeds up to 100% higher than uncoated mills.

Aluminum Titanium Nitride (AlTiN) coatings are harder than Titanium Aluminum Nitride (TiAlN). It offers higher abrasive and heat resistance. It extends tool life and reduces cycles commonly used for machining aircraft and aerospace materials, nickel alloys, stainless steels, titanium alloys, cast iron, and carbon steels.

Aluminum Chromium Nitride (AlCrN) coatings are extremely resistant to high temperatures and wear. The coating features chromium instead of titanium which offers better performance over Titanium Aluminum Nitride (TiAlN). The coating can be used for machining stainless steel, titanium, cast iron, tool steels, and other difficult materials. It can be used in a variety of machining applications.

Kennametal Coating Development

Kennametal is constantly evaluating and improving to yield higher productivity and consistency on tools and workpiece materials. Kennametal’s Research and Development department updates recommendations, marketing literature, and catalogs based on continuous improvements to our coating process. Refer to our basic speeds and feeds calculator to help guide you.

Surface Feet Recommendations are Vital

To achieve benefits from high-performance coatings, they must run at significantly higher speeds than other coatings. If coated tools run at parameters other than those recommended, they can be counterproductive. Follow the manufacturer’s recommended starting points and work from there. 

For any technical inquiries, please reach out to us via our Customer Support center

You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

Product data

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material NumberISO Catalog NumberGrade  

You are about to leave the Solution building process.

Are you sure you want to leave?