Inserts 5720
5720 high-speed geometry inserts offer a high positive geometry for machining aluminum alloys, copper, and brass. These precision ground insets are pressed and have a polished top rake face which helps reduce a built-up edge and provides a better surface finish. The 5270 shoulder milling inserts can be used for thin-walled components in roughing applications and in unstable conditions. They are great for pocketing, slotting, and profiling.
-
K Cast Iron (13)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (13)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (13)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (13)
-
-
N Non-Ferrous Materials (13)
-
N1Wrought Aluminum (13)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (13)
-
N3High-Silicon Aluminum Alloys Si >12.2% (13)
-
-
0.012 in (1)
-
0.016 in (1)
-
0.031 in (1)
-
0.049 in (1)
-
0.066 in (1)
-
0.083 in (1)
-
0.103 in (2)
-
0.122 in (2)
-
0.13 in (1)
-
0.206 in (1)
-
0.244 in (1)
-
0.301 mm (1)
-
0.4 mm (1)
-
0.8 mm (1)
-
1.25 mm (1)
-
1.675 mm (1)
-
2.1 mm (1)
-
2.6 mm (2)
-
3.1 mm (2)
-
3.301 mm (1)
-
5.2 mm (1)
-
6.2 mm (1)
-
16.375 mm (7)
-
16.401 mm (5)
-
16.45 mm (1)
-
0.645 in (7)
-
0.646 in (5)
-
0.648 in (1)