Produkt ähnlich wie:
DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
Drill Fix™ DFR™ Werkzeugkörper
Material Nummer1993113
ISO Katalog NummerKM40DFR220R3MANSI Katalog NummerKM40DFR220R3M
- P Stahl
- M Rostfreier Stahl
- K Gusseisen
- N NE-Metalle
- S Hochwarmfeste Legierungen
- Bohren
- Bohren: Schräge Eintrittsfläche
- Bohren: Schräge Austrittsfläche
- Bohren: X-Verstellung
- Bohren: Konvexe Eintrittsfläche
- Shank: KM-TS™ ISO 26622
- Innere Kühlmittelzuführung: Radial: Bohren mit Wendeschneidplatten
- Bohren: Sacklochbohrung
- Chain Drilling
- Drilling: Cross-Hole Drilling
- Drilling: Half-Cylindrical Drilling
- Drilling: Corner Drilling 45°
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Überblick
- Anwendungsdaten
- Herunterladen
- Kompatible Teile Maschinenseite
- Kompatible Teile Werkstückseite
- Ersatzteile
- Bewertung
- F&A
Material Nummer | 1993113 |
ISO Katalog Nummer | KM40DFR220R3M |
ANSI Katalog Nummer | KM40DFR220R3M |
[CSMS] Systemgröße – Maschinenseite | KM40 |
[D1] Bohrerdurchmesser M | 22 mm |
[D1] Bohrerdurchmesser M | .8661 in |
[D1MAX] Bohrerdurchmesser max. | 23 mm |
[D1MAX] Bohrerdurchmesser max. | .9055 in |
[L1] Messlänge der Wendeschneidplatte | 95.552 mm |
[L1] Messlänge der Wendeschneidplatte | 3.761 in |
[L4] Maximale Bohrtiefe | 66 mm |
[L4] Maximale Bohrtiefe | 2.598 in |
[L5] Bohrerspitzenlänge | 0.755 mm |
[L5] Bohrerspitzenlänge | .0297 in |
Wendeschneidplatten-Größe | DFR0403. |
Werkstoffe
- Stahl
- Rostfreier Stahl
- Gusseisen
- NE-Metalle
- Hochwarmfeste Legierungen
Uses and application
- Bohren
- Bohren: Schräge Eintrittsfläche
- Bohren: Schräge Austrittsfläche
- Bohren: X-Verstellung
- Bohren: Konvexe Eintrittsfläche
- Shank: KM-TS™ ISO 26622
- Innere Kühlmittelzuführung: Radial: Bohren mit Wendeschneidplatten
- Bohren: Sacklochbohrung
- Chain Drilling
- Drilling: Cross-Hole Drilling
- Drilling: Half-Cylindrical Drilling
- Drilling: Corner Drilling 45°
Features and benefits
- Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.
- X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.
- Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
- Drill shipped with insert screws and Torx wrench.
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
Warnung
WARNUNG • Drill Fix DFR
WARNUNG! Beim Austritt des Bohrers aus dem Werkstück entsteht eine Federscheibe. Bei drehendem Werkstück wird die Scheibe vom Werkstück weggeschleudert! Entsprechende Sicherheitsvorkehrungen sind erforderlich! |
Dimension
Dimensions • DFR Whistle Notch (WD)-Schaft
D | LS |
20 | 45 |
25 | 45 |
32 | 58 |
Dimensions • DFR Weldon®-Schaft • DIN 1835-1 Form B
D | LS |
20 | 50 |
Anwendungsdaten
Metrisch | ||||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||||
Bereich | ||||||||||||
Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00 mm | DFR03... 16,50–20,00 mm | DFR04... 20,50–24,00 mm | ||||||
P | 1 | S | O | MD | KCU25 | 310 | 325 | 360 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 |
I | MD | KC7140 | ||||||||||
U | O | MD | KCU40 | 200 | 215 | 230 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 130 | 135 | 150 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | MD | KC7140 | ||||||||||
2 | S | O | GD | KCPK10 | 310 | 325 | 360 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 200 | 215 | 230 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
I | O | MD | KC7140 | 130 | 135 | 150 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
3 | S | O | GD | KCPK10 | 260 | 285 | 320 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 180 | 195 | 220 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 110 | 120 | 140 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
4 | S | O | GD | KCU25 | 220 | 250 | 300 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 150 | 180 | 220 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 90 | 110 | 140 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
5 | S | O | GD | KCU25 | 180 | 200 | 220 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 120 | 135 | 150 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 70 | 85 | 100 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
6 | S | O | GD | KCU25 | 180 | 200 | 220 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 120 | 135 | 150 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 70 | 85 | 100 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
M | 1 | S | O | MD | KC7140 | 150 | 190 | 230 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 |
I | MD | KC7140 | ||||||||||
U | O | MD | KC7140 | 100 | 130 | 160 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 60 | 80 | 100 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
2 | S | O | MD | KC7140 | 150 | 180 | 210 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
I | MD | KC7140 | ||||||||||
U | O | MD | KC7140 | 100 | 130 | 160 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 60 | 80 | 100 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
3 | S | O | MD | KC7140 | 100 | 130 | 160 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
I | MD | KC7140 | ||||||||||
U | O | MD | KC7140 | 80 | 110 | 140 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 50 | 70 | 90 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 |
Metrisch | ||||||||||||
Schnittgeschwindigkeit | ||||||||||||
Bereich | Empfohlene Vorschubrate (fz) pro Durchmesser | |||||||||||
Werkstoffgruppe | Schnitt– bedingung | Plattensitz | Geometrie | Sorte | Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00mm | DFR03... 16,50–20,00mm | DFR04... 20,50–24,00mm | |
P | 1 | S | O | MD | KCU25 | 310 | 325 | 360 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 |
1 | S | I | MD | KC7140 | 310 | 325 | 360 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
1 | U | O | MD | KCU40 | 200 | 215 | 230 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
1 | U | I | MD | KC7140 | 200 | 215 | 230 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
1 | I | O | MD | KC7140 | 130 | 135 | 150 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
1 | I | I | MD | KC7140 | 130 | 135 | 150 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
2 | S | O | GD | KCPK10 | 310 | 325 | 360 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
2 | S | I | LD | KC7140 | 310 | 325 | 360 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
2 | U | O | GD | KCU40 | 200 | 215 | 230 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
2 | U | I | LD | KC7140 | 200 | 215 | 230 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
2 | I | O | MD | KC7140 | 130 | 135 | 150 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
2 | I | I | LD | KC7140 | 130 | 135 | 150 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
3 | S | O | GD | KCPK10 | 260 | 285 | 320 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
3 | S | I | LD | KC7140 | 260 | 285 | 320 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
3 | U | O | GD | KCU40 | 180 | 195 | 220 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
3 | U | I | LD | KC7140 | 180 | 195 | 220 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
3 | I | O | GD | KC7140 | 110 | 120 | 140 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
3 | I | I | LD | KC7140 | 110 | 120 | 140 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
4 | S | O | GD | KCU25 | 220 | 250 | 300 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
4 | S | I | LD | KC7140 | 220 | 250 | 300 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
4 | U | O | GD | KCU40 | 150 | 180 | 220 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
4 | U | I | LD | KC7140 | 150 | 180 | 220 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
4 | I | O | GD | KC7140 | 90 | 110 | 140 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
4 | I | I | LD | KC7140 | 90 | 110 | 140 | mm/r | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
5 | S | O | GD | KCU25 | 180 | 200 | 220 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
5 | S | I | LD | KC7140 | 180 | 200 | 220 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
5 | U | O | GD | KCU40 | 120 | 135 | 150 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
5 | U | I | LD | KC7140 | 120 | 135 | 150 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
5 | I | O | GD | KC7140 | 70 | 85 | 100 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
5 | I | I | LD | KC7140 | 70 | 85 | 100 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
6 | S | O | GD | KCU25 | 180 | 200 | 220 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
6 | S | I | LD | KC7140 | 180 | 200 | 220 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
6 | U | O | GD | KCU40 | 120 | 135 | 150 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
6 | U | I | LD | KC7140 | 120 | 135 | 150 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
6 | I | O | GD | KC7140 | 70 | 85 | 100 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
6 | I | I | LD | KC7140 | 70 | 85 | 100 | mm/r | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 |
Metrisch | ||||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||||
Bereich | ||||||||||||
Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00 mm | DFR03... 16,50–20,00 mm | DFR04... 20,50–24,00 mm | ||||||
P | 1 | S | O | MD | KCU25 | 310 | 325 | 360 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 |
I | MD | KC7140 | ||||||||||
U | O | MD | KCU40 | 200 | 215 | 230 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 130 | 135 | 150 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | MD | KC7140 | ||||||||||
2 | S | O | GD | KCPK10 | 310 | 325 | 360 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 200 | 215 | 230 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
I | O | MD | KC7140 | 130 | 135 | 150 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
3 | S | O | GD | KCPK10 | 260 | 285 | 320 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 180 | 195 | 220 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 110 | 120 | 140 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
4 | S | O | GD | KCU25 | 220 | 250 | 300 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 150 | 180 | 220 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 90 | 110 | 140 | mm/U | 0,09–0,15 | 0,11–0,18 | 0,15–0,25 | ||
I | LD | KC7140 | ||||||||||
5 | S | O | GD | KCU25 | 180 | 200 | 220 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 120 | 135 | 150 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 70 | 85 | 100 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
6 | S | O | GD | KCU25 | 180 | 200 | 220 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | |
I | LD | KC7140 | ||||||||||
U | O | GD | KCU40 | 120 | 135 | 150 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KC7140 | 70 | 85 | 100 | mm/U | 0,07–0,13 | 0,09–0,15 | 0,11–0,18 | ||
I | LD | KC7140 | ||||||||||
M | 1 | S | O | MD | KC7140 | 150 | 190 | 230 | mm/U | 0,07-0,13 | 0,08-0,16 | 0,10-0,18 |
I | MD | KC7140 | ||||||||||
U | O | MD | KC7140 | 100 | 130 | 160 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 60 | 80 | 100 | mm/U | 0,07-0,13 | 0,08-0,16 | 0,10-0,18 | ||
I | MD | KC7140 | ||||||||||
2 | S | O | MD | KC7140 | 150 | 180 | 210 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
I | MD | KC7140 | ||||||||||
U | O | MD | KC7140 | 100 | 130 | 160 | mm/U | 0,07-0,13 | 0,08-0,16 | 0,10-0,18 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 60 | 80 | 100 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
3 | S | O | MD | KC7140 | 100 | 130 | 160 | mm/U | 0,07-0,13 | 0,08-0,16 | 0,10-0,18 | |
I | MD | KC7140 | ||||||||||
U | O | MD | KC7140 | 80 | 110 | 140 | mm/U | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | ||
I | MD | KC7140 | ||||||||||
I | O | MD | KC7140 | 50 | 70 | 90 | mm/U | 0,07-0,13 | 0,08-0,16 | 0,10-0,18 | ||
I | MD | KC7140 |
Metrisch | ||||||||||||
Schnittgeschwindigkeit | ||||||||||||
Bereich | Empfohlene Vorschubrate (fz) pro Durchmesser | |||||||||||
Werkstoffgruppe | Schnitt– bedingung | Plattensitz | Geometrie | Sorte | Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00 | DFR03... 16,50–20,00 | DFR04... 20,50–24,00 | |
M | 1 | S | O | MD | KC7140 | 150 | 190 | 230 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 |
1 | S | I | MD | KC7140 | 150 | 190 | 230 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
1 | U | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
1 | U | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
1 | I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
1 | I | I | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
2 | S | O | MD | KC7140 | 150 | 180 | 210 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
2 | S | I | MD | KC7140 | 150 | 180 | 210 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
2 | U | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
2 | U | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
2 | I | O | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
2 | I | I | MD | KC7140 | 60 | 80 | 100 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
3 | S | O | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
3 | S | I | MD | KC7140 | 100 | 130 | 160 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
3 | U | O | MD | KC7140 | 80 | 110 | 140 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
3 | U | I | MD | KC7140 | 80 | 110 | 140 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
3 | I | O | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 | |
3 | I | I | MD | KC7140 | 50 | 70 | 90 | mm/r | 0,07–0,13 | 0,08–0,16 | 0,10–0,18 |
Metrisch | ||||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||||
Bereich | ||||||||||||
Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00 mm | DFR03... 16,50–20,00 mm | DFR04... 20,50–24,00 mm | ||||||
K | 1 | S | O | GD | KCPK10 | 200 | 240 | 300 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU25 | 120 | 155 | 200 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KCU40 | 80 | 100 | 125 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
2 | S | O | GD | KCPK10 | 180 | 220 | 260 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU25 | 110 | 140 | 170 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KCU40 | 80 | 100 | 120 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
3 | S | O | GD | KCPK10 | 180 | 220 | 260 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU25 | 110 | 140 | 170 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KCU40 | 80 | 100 | 120 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
N | 1 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 300 | 400 | 500 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 200 | 300 | 400 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
2 | S | O | ST | KD1425 | 375 | 550 | 775 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 175 | 250 | 325 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
3 | S | O | ST | KD1425 | 350 | 500 | 650 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 150 | 250 | 350 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
4 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 200 | 300 | 400 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
5 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 200 | 300 | 400 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
6 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | GD | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | GD | KCU40 | ||||||||||
I | O | GD | KMF | 200 | 300 | 400 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | GD | KMF |
Metrisch | ||||||||||||
Schnittgeschwindigkeit | ||||||||||||
Bereich | Empfohlene Vorschubrate (fz) pro Durchmesser | |||||||||||
Werkstoffgruppe | Schnitt– bedingung | Plattensitz | Geometrie | Sorte | Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00mm | DFR03... 16,50–20,00mm | DFR04... 20,50–24,00mm | |
K | 1 | S | O | GD | KCPK10 | 200 | 240 | 300 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 |
1 | S | I | LD | KCU40 | 200 | 240 | 300 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
1 | U | O | GD | KCU25 | 120 | 155 | 200 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
1 | U | I | LD | KC7140 | 120 | 155 | 200 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
1 | I | O | GD | KCU40 | 80 | 100 | 125 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
1 | I | I | LD | KC7140 | 80 | 100 | 125 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
2 | S | O | GD | KCPK10 | 180 | 220 | 260 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
2 | S | I | LD | KCU40 | 180 | 220 | 260 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
2 | U | O | GD | KCU25 | 110 | 140 | 170 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
2 | U | I | LD | KC7140 | 110 | 140 | 170 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
2 | I | O | GD | KCU40 | 80 | 100 | 120 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
2 | I | I | LD | KC7140 | 80 | 100 | 120 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
3 | S | O | GD | KCPK10 | 180 | 220 | 260 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
3 | S | I | LD | KCU40 | 180 | 220 | 260 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
3 | U | O | GD | KCU25 | 110 | 140 | 170 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
3 | U | I | LD | KC7140 | 110 | 140 | 170 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
3 | I | O | GD | KCU40 | 80 | 100 | 120 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
3 | I | I | LD | KC7140 | 80 | 100 | 120 | mm/tr | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 |
Metrisch | ||||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||||
Bereich | ||||||||||||
Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00 mm | DFR03... 16,50–20,00 mm | DFR04... 20,50–24,00 mm | ||||||
K | 1 | S | O | GD | KCPK10 | 200 | 240 | 300 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU25 | 120 | 155 | 200 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KCU40 | 80 | 100 | 125 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
2 | S | O | GD | KCPK10 | 180 | 220 | 260 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU25 | 110 | 140 | 170 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KCU40 | 80 | 100 | 120 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
3 | S | O | GD | KCPK10 | 180 | 220 | 260 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU25 | 110 | 140 | 170 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
I | O | GD | KCU40 | 80 | 100 | 120 | mm/U | 0,10–0,18 | 0,12–0,20 | 0,14–0,24 | ||
I | LD | KC7140 | ||||||||||
N | 1 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 300 | 400 | 500 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 200 | 300 | 400 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | ||
I | LD | KCU40 | ||||||||||
2 | S | O | ST | KD1425 | 375 | 550 | 775 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 175 | 250 | 325 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
3 | S | O | ST | KD1425 | 350 | 500 | 650 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 150 | 250 | 350 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | ||
I | LD | KCU40 | ||||||||||
4 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
I | ST | KD1425 | ||||||||||
U | O | LD | KCU40 | 250 | 350 | 450 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | ||
I | LD | KCU40 | ||||||||||
I | O | LD | KCU40 | 200 | 300 | 400 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | LD | KCU40 | ||||||||||
6 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | |
I | ST | KD1425 | ||||||||||
U | O | HP | KCU40 | 250 | 350 | 450 | mm/U | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | ||
I | HP | KCU40 | ||||||||||
I | O | HP | KMF | 200 | 300 | 400 | mm/U | 0,07-0,09 | 0,10-0,14 | 0,12-0,16 | ||
I | HP | KMF |
Metrisch | ||||||||||||
Schnittgeschwindigkeit | ||||||||||||
Bereich | Empfohlene Vorschubrate (fz) pro Durchmesser | |||||||||||
Werkstoffgruppe | Schnitt– bedingung | Plattensitz | Geometrie | Sorte | Min. | Startwert | Max. | Ø | DFR02... 12,50–16,00mm | DFR03... 16,50–20,00mm | DFR04... 20,50–24,00mm | |
N | 1 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 |
1 | S | I | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
1 | U | O | LD | KCU40 | 300 | 400 | 500 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
1 | U | I | LD | KCU40 | 300 | 400 | 500 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
1 | I | O | LD | KCU40 | 200 | 300 | 400 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
1 | I | I | LD | KCU40 | 200 | 300 | 400 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
2 | S | O | ST | KD1425 | 375 | 550 | 775 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
2 | S | I | ST | KD1425 | 375 | 550 | 775 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
2 | U | O | LD | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
2 | U | I | LD | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
2 | I | O | LD | KCU40 | 175 | 250 | 325 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
2 | I | I | LD | KCU40 | 175 | 250 | 325 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
3 | S | O | ST | KD1425 | 350 | 500 | 650 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
3 | S | I | ST | KD1425 | 350 | 500 | 650 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
3 | U | O | LD | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
3 | U | I | LD | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
3 | I | O | LD | KCU40 | 150 | 250 | 350 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
3 | I | I | LD | KCU40 | 150 | 250 | 350 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
4 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
4 | S | I | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
4 | U | O | LD | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
4 | U | I | LD | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
4 | I | O | LD | KCU40 | 200 | 300 | 400 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
4 | I | I | LD | KCU40 | 200 | 300 | 400 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
6 | S | O | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
6 | S | I | ST | KD1425 | 400 | 600 | 800 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
6 | U | O | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
6 | U | I | HP | KCU40 | 250 | 350 | 450 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
6 | I | O | HP | KMF | 200 | 300 | 400 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | |
6 | I | I | HP | KMF | 200 | 300 | 400 | mm/r | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 |
Metrisch | ||||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||||
Bereich | ||||||||||||
Min. | Startwert | Max. | Ø | DFR02... 12,50 | DFR03... 16,50 | DFR04... 20,50 | ||||||
S | 1 | S | O | GD | KCU40 | 60 | 70 | 75 | mm/U | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU40 | 40 | 50 | 60 | mm/U | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
I | LD | KC7140 | ||||||||||
I | O | MD | KC7140 | 25 | 30 | 40 | mm/U | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
I | MD | KC7140 | ||||||||||
2 | S | O | GD | KCU40 | 50 | 60 | 70 | mm/U | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU40 | 30 | 40 | 50 | mm/U | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
I | LD | KC7140 | ||||||||||
I | O | MD | KC7140 | 25 | 30 | 40 | mm/U | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | ||
I | MD | KC7140 | ||||||||||
3 | S | O | GD | KCU40 | 70 | 80 | 90 | mm/U | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU40 | 50 | 60 | 70 | mm/U | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | ||
I | LD | KC7140 | ||||||||||
I | O | MD | KC7140 | 30 | 40 | 50 | mm/U | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | ||
I | MD | KC7140 | ||||||||||
4 | S | O | GD | KCU40 | 70 | 80 | 90 | mm/U | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
I | LD | KCU40 | ||||||||||
U | O | GD | KCU40 | 50 | 60 | 70 | mm/U | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | ||
I | LD | KC7140 | ||||||||||
I | O | MD | KC7140 | 30 | 40 | 50 | mm/U | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | ||
I | MD | KC7140 |
Metrisch | ||||||||||||
Schnittgeschwindigkeit | ||||||||||||
Bereich | Empfohlene Vorschubrate (fz) pro Durchmesser | |||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Min. | Startwert | Max. | Ø | DFR02... 12,50-16,00 mm | DFR03... 16,50-20,00 mm | DFR04... 20,50-24,00 mm | |
S | 1 | S | O | GD | KCU40 | 60 | 70 | 75 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 |
1 | S | I | LD | KCU40 | 60 | 70 | 75 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
1 | U | O | GD | KCU40 | 40 | 50 | 60 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
1 | U | I | LD | KC7140 | 40 | 50 | 60 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
1 | I | O | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
1 | I | I | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
2 | S | O | GD | KCU40 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
2 | S | I | LD | KCU40 | 50 | 60 | 70 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
2 | U | O | GD | KCU40 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
2 | U | I | LD | KC7140 | 30 | 40 | 50 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
2 | I | O | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
2 | I | I | MD | KC7140 | 25 | 30 | 40 | mm/r | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | |
3 | S | O | GD | KCU40 | 70 | 80 | 90 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
3 | S | I | LD | KCU40 | 70 | 80 | 90 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
3 | U | O | GD | KCU40 | 50 | 60 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
3 | U | I | LD | KC7140 | 50 | 60 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
3 | I | O | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
3 | I | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
4 | S | O | GD | KCU40 | 70 | 80 | 90 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
4 | S | I | LD | KCU40 | 70 | 80 | 90 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
4 | U | O | GD | KCU40 | 50 | 60 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
4 | U | I | LD | KC7140 | 50 | 60 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
4 | I | O | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 | |
4 | I | I | MD | KC7140 | 30 | 40 | 50 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,06–0,10 |
DFR™ • PKD • Metrisch
Metrisch | ||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||
Bereich | ||||||||||
Min. | Startwert | Max. | Ø | DFR04 20,50–24,00 mm | ||||||
N | 1 | S | O | ST | KD1425 | 396 | 720 | 841 | mm/U | 0,06–0,08 |
I | ST | KD1425 | ||||||||
2 | S | O | ST | KD1425 | 369 | 670 | 782 | mm/U | 0,12–0,18 | |
I | ST | KD1425 | ||||||||
3 | S | O | ST | KD1425 | 341 | 619 | 723 | mm/U | 0,12–0,18 | |
I | ST | KD1425 | ||||||||
4 | S | O | ST | KD1425 | 475 | 720 | 841 | mm/U | 0,12–0,18 | |
I | ST | KD1425 | ||||||||
5 | S | O | ST | KD1425 | 480 | 720 | 864 | mm/U | 0,06–0,08 | |
I | ST | KD1425 |
Zoll | ||||||||||
Werkstoffgruppe | Schnitt- bedingung | Plattensitz | Geometrie | Sorte | Schnittgeschwindigkeit | Empfohlene Vorschubrate (fz) pro Durchmesser | ||||
Bereich | ||||||||||
Min. | Startwert | Max. | Ø | DFR04 .813"–1.00" | ||||||
N | 1 | S | O | ST | KD1425 | 1300 | 2362 | 2760 | IPR | .002–.003 |
I | ST | KD1425 | ||||||||
2 | S | O | ST | KD1425 | 1209 | 2197 | 2567 | IPR | .005–.007 | |
I | ST | KD1425 | ||||||||
3 | S | O | ST | KD1425 | 1118 | 2032 | 2374 | IPR | .005–.007 | |
I | ST | KD1425 | ||||||||
4 | S | O | ST | KD1425 | 1560 | 2362 | 2760 | IPR | .005–.007 | |
I | ST | KD1425 | ||||||||
5 | S | O | ST | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | |
I | ST | KD1425 |
Metrisch | ||||||||||
Schnittgeschwindigkeit | ||||||||||
Bereich | Empfohlene Vorschubrate (fz) pro Durchmesser | |||||||||
Werkstoffgruppe | Schnitt– bedingung | Plattensitz | Geometrie | Sorte | Min. | Startwert | Max. | Ø | DFR04 20,50–24,00 mm | |
N | 1 | S | O | ST | KD1425 | 396 | 720 | 841 | mm/r | 0,06–0,08 |
1 | S | I | ST | KD1425 | 396 | 720 | 841 | mm/r | 0,06–0,08 | |
2 | S | O | ST | KD1425 | 369 | 670 | 782 | mm/r | 0,12–0,18 | |
2 | S | I | ST | KD1425 | 369 | 670 | 782 | mm/r | 0,12–0,18 | |
3 | S | O | ST | KD1425 | 341 | 619 | 723 | mm/r | 0,12–0,18 | |
3 | S | I | ST | KD1425 | 341 | 619 | 723 | mm/r | 0,12–0,18 | |
4 | S | O | ST | KD1425 | 475 | 720 | 841 | mm/r | 0,12–0,18 | |
4 | S | I | ST | KD1425 | 475 | 720 | 841 | mm/r | 0,12–0,18 | |
5 | S | O | ST | KD1425 | 480 | 720 | 864 | mm/r | 0,06–0,08 | |
5 | S | I | ST | KD1425 | 480 | 720 | 864 | mm/r | 0,06–0,08 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use