Drilling
Drilling: Inclined Exit
Drilling: Stacked Plates
Dimensions de l'outil : 2 goujures/2 listels/lubrifiantDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 6371068 |
| Ref. ISO Catalogue | KTFST12500HPLM |
| Ref. ANSI Catalogue | KTFST12500HPLM |
| Nuance | KCMS15 |
| [D1] Diamètre de foret | 12.5 mm |
| [D1] Diamètre de foret | .4921 in |
| [L5] Longueur de pointe du foret | 2.64 mm |
| [L5] Longueur de pointe du foret | .1039 in |
| [SSC] Taille de l’assise de plaquette | O |
DrillingDrilling: Inclined ExitDrilling: Stacked PlatesDimensions de l'outil : 2 goujures/2 listels/lubrifiantCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Tolerans • Metrik | |
| D1 metrik | Tolerans k8 |
| 6 | 0,000/+0,018 |
| 0,000/+0,022 | |
| 0,000/+0,027 | |
| 0,000/+0,033 | |
| Tolerans • İnç | |
| D1 inç | Tolerans k8 |
| 0.2362 | 0.0000/+0.0007 |
| 0.0000/+0.0009 | |
| 0.0000/+0.0011 | |
| 0.0000/+0.0013 | |
| Malzeme grubu | Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| P | 0 | 315 | 415 | 575 | IPR | .004 | .004 | .005 | .006 | .007 | .007 | .009 | .011 | .011 |
| 1 | 300 | 430 | 560 | IPR | .004 | .004 | .005 | .006 | .007 | .007 | .009 | .011 | .011 | |
| 2 | 330 | 460 | 590 | IPR | .004 | .004 | .005 | .006 | .007 | .007 | .009 | .011 | .011 | |
| 3 | 200 | 330 | 430 | IPR | .004 | .004 | .005 | .006 | .006 | .007 | .009 | .012 | .012 | |
| 4 | 200 | 330 | 430 | IPR | .004 | .004 | .005 | .006 | .006 | .007 | .009 | .010 | .010 | |
| 5 | 200 | 260 | 330 | IPR | .004 | .004 | .004 | .005 | .006 | .006 | .008 | .009 | .010 | |
| 6 | 200 | 230 | 260 | IPR | .004 | .004 | .004 | .005 | .006 | .006 | .008 | .009 | .010 | |
| K | 1 | 260 | 400 | 560 | IPR | .005 | .005 | .006 | .007 | .009 | .010 | .012 | .014 | .015 |
| 2 | 260 | 360 | 390 | IPR | .005 | .005 | .006 | .007 | .009 | .010 | .012 | .014 | .015 | |
| 3 | 160 | 260 | 330 | IPR | .004 | .005 | .005 | .006 | .007 | .008 | .011 | .013 | .013 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 95 | 125 | 175 | mm/dev. | 0,10 | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,24 | 0,28 | 0,29 |
| 1 | 90 | 130 | 170 | mm/dev. | 0,10 | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,24 | 0,28 | 0,29 | |
| 2 | 100 | 140 | 180 | mm/dev. | 0,10 | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,24 | 0,28 | 0,29 | |
| 3 | 60 | 100 | 130 | mm/dev. | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,18 | 0,23 | 0,30 | 0,31 | |
| 4 | 60 | 100 | 130 | mm/dev. | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,18 | 0,23 | 0,25 | 0,26 | |
| 5 | 60 | 80 | 100 | mm/dev. | 0,09 | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,20 | 0,24 | 0,25 | |
| 6 | 60 | 70 | 80 | mm/dev. | 0,09 | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,20 | 0,24 | 0,25 | |
| K | 1 | 80 | 120 | 170 | mm/dev. | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 |
| 2 | 80 | 110 | 120 | mm/dev. | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 | |
| 3 | 50 | 80 | 100 | mm/dev. | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,21 | 0,28 | 0,32 | 0,33 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 95 | 125 | 175 | mm/r | 0,10 | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,24 | 0,28 | 0,29 |
| 1 | 90 | 130 | 170 | mm/r | 0,10 | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,24 | 0,28 | 0,29 | |
| 2 | 100 | 140 | 180 | mm/r | 0,10 | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,24 | 0,28 | 0,29 | |
| 3 | 60 | 100 | 130 | mm/r | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,18 | 0,23 | 0,30 | 0,31 | |
| 4 | 60 | 100 | 130 | mm/r | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,18 | 0,23 | 0,25 | 0,26 | |
| 5 | 60 | 80 | 100 | mm/r | 0,09 | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,20 | 0,24 | 0,25 | |
| 6 | 60 | 70 | 80 | mm/r | 0,09 | 0,10 | 0,11 | 0,12 | 0,14 | 0,16 | 0,20 | 0,24 | 0,25 | |
| K | 1 | 80 | 120 | 170 | mm/r | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 |
| 2 | 80 | 110 | 120 | mm/r | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 | |
| 3 | 50 | 80 | 100 | mm/r | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,21 | 0,28 | 0,32 | 0,33 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| M | 1 | 50 | 60 | 90 | mm/dev. | 0,07 | 0,08 | 0,09 | 0,11 | 0,12 | 0,13 | 0,16 | 0,19 | 0,20 |
| 2 | 30 | 60 | 90 | mm/dev. | 0,07 | 0,08 | 0,09 | 0,11 | 0,12 | 0,13 | 0,16 | 0,19 | 0,20 | |
| 3 | 20 | 50 | 60 | mm/dev. | 0,07 | 0,08 | 0,09 | 0,11 | 0,12 | 0,13 | 0,16 | 0,19 | 0,20 | |
| Malzeme grubu | Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| M | 1 | 160 | 200 | 300 | IPR | .003 | .003 | .004 | .004 | .005 | .005 | .006 | .007 | .008 |
| 2 | 100 | 200 | 300 | IPR | .003 | .003 | .004 | .004 | .005 | .005 | .006 | .007 | .008 | |
| 3 | 70 | 160 | 200 | IPR | .003 | .003 | .004 | .004 | .005 | .005 | .006 | .007 | .008 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| M | 1 | 50 | 60 | 90 | mm/r | 0,07 | 0,08 | 0,09 | 0,11 | 0,12 | 0,13 | 0,16 | 0,19 | 0,20 |
| 2 | 30 | 60 | 90 | mm/r | 0,07 | 0,08 | 0,09 | 0,11 | 0,12 | 0,13 | 0,16 | 0,19 | 0,20 | |
| 3 | 20 | 50 | 60 | mm/r | 0,07 | 0,08 | 0,09 | 0,11 | 0,12 | 0,13 | 0,16 | 0,19 | 0,20 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| K | 1 | 100 | 175 | 200 | mm/dev. | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 |
| 2 | 100 | 160 | 180 | mm/dev. | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 | |
| 3 | 70 | 85 | 120 | mm/dev. | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 | 0,21 | 0,28 | 0,32 | 0,33 | |
| Malzeme grubu | Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| K | 1 | 330 | 570 | 660 | IPR | .005 | .005 | .006 | .007 | .009 | .010 | .012 | .014 | .015 |
| 2 | 330 | 520 | 590 | IPR | .005 | .005 | .006 | .007 | .009 | .010 | .012 | .014 | .015 | |
| 3 | 230 | 280 | 390 | IPR | .004 | .005 | .005 | .006 | .007 | .008 | .011 | .013 | .013 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| K | 1 | 100 | 175 | 200 | mm/r | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 |
| 2 | 100 | 160 | 180 | mm/r | 0,12 | 0,14 | 0,16 | 0,19 | 0,23 | 0,26 | 0,30 | 0,36 | 0,37 | |
| 3 | 70 | 85 | 120 | mm/r | 0,11 | 0,13 | 0,15 | 0,17 | 0,19 – 0,42 | 0,21 | 0,28 | 0,32 | 0,33 | |
| Malzeme grubu | Kesme hızı | Metrik | |||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| S | 4 | 10 | 13 | 20 | mm/dev. | 0,02–0,08 | 0,03–0,10 | 0,04–0,12 | 0,05–0,16 | 0,05–0,18 | 0,06–0,20 |
| N | 1 | 100 | 230 | 270 | mm/dev. | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
| 2 | 100 | 220 | 270 | mm/dev. | 0,14–0,23 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| 3 | 90 | 180 | 230 | mm/dev. | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
| 4 | 90 | 130 | 200 | mm/dev. | 0,10–0,18 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| C | 2 | 70 | 110 | 140 | mm/dev. | 0,03-0,10 | 0,04-0,12 | 0,05-0,15 | 0,05-0,18 | 0,06-0,21 | 0,07-0,23 |
| 3 | 10 | 13 | 20 | mm/dev. | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| 4 | 10 | 20 | 40 | mm/dev. | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| Malzeme grubu | Kesme hızı | İnç | |||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||
| Min. | Başlangıç değeri | Maks. | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| S | 4 | 30 | 40 | 70 | IPR | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 |
| N | 1 | 330 | 750 | 890 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 330 | 720 | 890 | IPR | .006–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 750 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 | |
| 4 | 300 | 430 | 660 | IPR | .004–.007 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| C | 4 | 230 | 360 | 460 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 |
| 4 | 30 | 40 | 70 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| 4 | 30 | 70 | 130 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| Malzeme grubu | Kesme hızı | Metrik | |||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||
| Min. | Başlangıç değeri | Maks. | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 |
| N | 1 | 100 | 230 | 270 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 |
| 2 | 100 | 220 | 270 | mm/r | 0.14～0.23 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| 3 | 90 | 180 | 230 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 | |
| 4 | 90 | 130 | 200 | mm/r | 0.10～0.18 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 |
| 3 | 10 | 13 | 20 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 | |
| 4 | 10 | 20 | 40 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 | |
| Malzeme grubu | Kesme hızı | İnç | |||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||
| Min. | Başlangıç değeri | Maks. | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 1 | 260 | 330 | 490 | IPR | .002 | .002 | .002 | .002 | .002 | .002 |
| Malzeme grubu | Kesme hızı | Metrik | |||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 1 | 80 | 100 | 150 | mm/dev. | 0,05 | 0,05 | 0,05 | 0,05 | 0,05 | 0,05 |
| Malzeme grubu | Kesme hızı | Metrik | |||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | |||
| C | 1 | 80 | 100 | 150 | mm/r | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 | 0.05～0.20 |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 110 | 140 | 170 | mm/dev. | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 |
| 1 | 110 | 140 | 170 | mm/dev. | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 2 | 100 | 120 | 140 | mm/dev. | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 3 | 80 | 100 | 120 | mm/dev. | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 4 | 70 | 90 | 110 | mm/dev. | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 5 | 60 | 80 | 100 | mm/dev. | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| 6 | 60 | 80 | 100 | mm/dev. | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| M | 1 | 40 | 60 | 80 | mm/dev. | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 |
| 2 | 35 | 55 | 70 | mm/dev. | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 | |
| K | 1 | 90 | 120 | 175 | mm/dev. | 0,12-0,21 | 0,14-0,24 | 0,16-0,28 | 0,18-0,32 | 0,20-0,36 | 0,22-0,40 | 0,25-0,44 | 0,28-0,48 | 0,29-0,50 |
| 2 | 80 | 110 | 140 | mm/dev. | 0,12–0,21 | 0,14–0,24 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,25–0,44 | 0,28–0,48 | 0,29–0,50 | |
| 3 | 70 | 80 | 100 | mm/dev. | 0,11-0,19 | 0,13-0,22 | 0,14-0,25 | 0,16-0,28 | 0,18-0,32 | 0,21-0,36 | 0,23-0,40 | 0,26-0,44 | 0,27-0,46 | |
| Malzeme grubu | Kesme hızı | İnç | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
| P | 0 | 360 | 460 | 560 | IPR | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 |
| 1 | 360 | 460 | 560 | IPR | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 | |
| 2 | 330 | 400 | 460 | IPR | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 | |
| 3 | 260 | 330 | 400 | IPR | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.008–0.012 | 0.008–0.014 | 0.009–0.014 | |
| 4 | 230 | 330 | 360 | IPR | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.008–0.012 | 0.008–0.014 | 0.009–0.014 | |
| 5 | 200 | 260 | 330 | IPR | 0.004–0.006 | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.013 | 0.008–0.013 | |
| 6 | 200 | 260 | 330 | IPR | 0.004–0.006 | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.013 | 0.008–0.013 | |
| M | 1 | 130 | 200 | 260 | IPR | 0.003–0.005 | 0.003–0.006 | 0.004–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.006–0.011 |
| 2 | 120 | 180 | 230 | IPR | 0.003–0.005 | 0.003–0.006 | 0.004–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.006–0.011 | |
| K | 1 | 300 | 400 | 580 | IPR | 0.005-0.008 | 0.006-0.009 | 0.006-0.011 | 0.007-0.013 | 0.008-0.014 | 0.009-0.016 | 0.010-0.017 | 0.011-0.019 | 0.011-0.020 |
| 2 | 260 | 360 | 460 | IPR | 0.005–0.008 | 0.006–0.009 | 0.006–0.011 | 0.007–0.013 | 0.008–0.014 | 0.009–0.016 | 0.010–0.017 | 0.011–0.019 | 0.011–0.020 | |
| 3 | 230 | 260 | 330 | IPR | 0.004-0.007 | 0.005-0.009 | 0.006-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.014 | 0.009-0.016 | 0.010-0.017 | 0.011-0.018 | |
| Malzeme grubu | Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | |||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 110 | 140 | 170 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 |
| 1 | 110 | 140 | 170 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 2 | 100 | 120 | 140 | mm/r | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
| 3 | 80 | 100 | 120 | mm/r | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 4 | 70 | 90 | 110 | mm/r | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
| 5 | 60 | 80 | 100 | mm/r | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| 6 | 60 | 80 | 100 | mm/r | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
| M | 1 | 40 | 60 | 80 | mm/r | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 |
| 2 | 35 | 55 | 70 | mm/r | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 | |
| K | 1 | 90 | 120 | 175 | mm/r | 0,12-0,21 | 0,14-0,24 | 0,16-0,28 | 0,18-0,32 | 0,20-0,36 | 0,22-0,40 | 0,25-0,44 | 0,28-0,48 | 0,29-0,50 |
| 2 | 80 | 110 | 140 | mm/r | 0,12–0,21 | 0,14–0,24 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,25–0,44 | 0,28–0,48 | 0,29–0,50 | |
| 3 | 70 | 80 | 100 | mm/r | 0,11-0,19 | 0,13-0,22 | 0,14-0,25 | 0,16-0,28 | 0,18-0,32 | 0,21-0,36 | 0,23-0,40 | 0,26-0,44 | 0,27-0,46 | |
| Malzeme grubu | Kesme hızı | Metrik | |||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 70 | 125 | 175 | mm/r | 0,09–0,18 | 0,10–0,21 | 0,12–0,24 | 0,14–0,30 | 0,18–0,36 | 0,23–0,42 | 0,27–0,48 | 0,28–0,50 |
| 1 | 70 | 120 | 170 | mm/r | 0,09–0,18 | 0,10–0,22 | 0,12–0,24 | 0,14–0,30 | 0,18–0,36 | 0,23–0,42 | 0,27–0,48 | 0,28–0,50 | |
| 2 | 90 | 135 | 180 | mm/r | 0,09–0,18 | 0,10–0,25 | 0,12–0,27 | 0,14–0,33 | 0,18–0,39 | 0,23–0,45 | 0,27–0,51 | 0,28–0,50 | |
| 3 | 60 | 95 | 130 | mm/r | 0,09–0,16 | 0,10–0,28 | 0,11–0,29 | 0,13–0,33 | 0,17–0,37 | 0,22–0,41 | 0,28–0,45 | 0,30–0,46 | |
| 4 | 50 | 90 | 130 | mm/r | 0,09–0,16 | 0,10–0,28 | 0,11–0,29 | 0,13–0,33 | 0,17–0,37 | 0,22–0,41 | 0,24–0,45 | 0,25–0,46 | |
| 5 | 30 | 65 | 100 | mm/r | 0,09–0,15 | 0,10–0,18 | 0,10–0,22 | 0,11–0,27 | 0,15–0,32 | 0,19–0,37 | 0,23–0,42 | 0,24–0,43 | |
| 6 | 40 | 60 | 80 | mm/r | 0,09–0,15 | 0,09–0,18 | 0,10–0,22 | 0,10–0,27 | 0,15–0,32 | 0,19–0,37 | 0,23–0,42 | 0,24–0,43 | |
| M | 1 | 20 | 55 | 90 | mm/r | 0,07–0,12 | 0,08–0,13 | 0,08–0,14 | 0,10–0,18 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 |
| 2 | 30 | 60 | 90 | mm/r | 0,07–0,12 | 0,08–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 | |
| 3 | 20 | 40 | 60 | mm/r | 0,07–0,12 | 0,08–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 | |
| K | 1 | 80 | 140 | 200 | mm/r | 0,11–0,26 | 0,13–0,32 | 0,15–0,44 | 0,18–0,49 | 0,25–0,58 | 0,29–0,64 | 0,35–0,70 | 0,36–0,75 |
| 2 | 80 | 130 | 180 | mm/r | 0,11–0,26 | 0,13–0,31 | 0,15–0,36 | 0,18–0,40 | 0,25–0,48 | 0,29–0,60 | 0,35–0,70 | 0,36–0,75 | |
| 3 | 70 | 95 | 120 | mm/r | 0,10-0,22 | 0,12-0,25 | 0,15-0,35 | 0,16-0,40 | 0,20-0,48 | 0,26-0,60 | 0,30-0,63 | 0,32-0,65 | |
| S | 1 | 10 | 20 | 30 | mm/r | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 |
| 2 | 10 | 20 | 30 | mm/r | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 | |
| 3 | 15 | 25 | 35 | mm/r | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 | |
| 4 | 20 | 30 | 40 | mm/r | 0,04–0,07 | 0,05–0,09 | 0,05–0,10 | 0,07–0,12 | 0,08–0,13 | 0,08–0,13 | 0,09–0,15 | 0,10–0,17 | |
| Malzeme grubu | Kesme hızı | İnç | |||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | .236 | .315 | .394 | .472 | .630 | .787 | .945 | 1.023 | |||
| P | 0 | 230 | 410 | 570 | IPR | .004–.007 | .004–.008 | .005–.009 | .006–.012 | .007–.014 | .009–.016 | .011–.019 | .011–.020 |
| 1 | 230 | 390 | 560 | IPR | .004–.007 | .004–.009 | .005–.009 | .006–.012 | .007–.014 | .009–.016 | .011–.019 | .011–.020 | |
| 2 | 300 | 440 | 590 | IPR | .004–.007 | .004–.010 | .005–.011 | .006–.013 | .007–.015 | .009–.018 | .011–.020 | .011–.020 | |
| 3 | 200 | 310 | 430 | IPR | .004–.006 | .004–.011 | .004–.011 | .005–.013 | .007–.015 | .009–.016 | .011–.018 | .012–.018 | |
| 4 | 160 | 300 | 430 | IPR | .004–.006 | .004–.011 | .004–.011 | .005–.013 | .007–.015 | .009–.016 | .009–.018 | .010–.018 | |
| 5 | 100 | 210 | 330 | IPR | .004–.006 | .004–.007 | .004–.009 | .004–.011 | .006–.013 | .008–.015 | .009–.016 | .009–.017 | |
| 6 | 130 | 200 | 260 | IPR | .004–.006 | .004–.007 | .004–.009 | .004–.011 | .006–.013 | .008–.015 | .009–.016 | .009–.017 | |
| M | 1 | 70 | 180 | 300 | IPR | .003–.005 | .003–.005 | .003–.006 | .004–.007 | .005–.009 | .006–.010 | .007–.011 | .008–.011 |
| 2 | 100 | 200 | 300 | IPR | .003–.005 | .003–.005 | .003–.006 | .004–.007 | .005–.009 | .006–.010 | .007–.011 | .008–.011 | |
| 3 | 70 | 130 | 200 | IPR | .003–.005 | .003–.005 | .003–.006 | .004–.006 | .005–.009 | .006–.010 | .007–.011 | .008–.011 | |
| K | 1 | 260 | 460 | 660 | IPR | .004–.010 | .005–.013 | .006–.017 | .007–.019 | .010–.023 | .011–.025 | .014–.028 | .014–.030 |
| 2 | 260 | 430 | 590 | IPR | .004–.010 | .005–.012 | .006–.014 | .007–.016 | .010–.019 | .011–.024 | .014–.028 | .014–.030 | |
| 3 | 230 | 310 | 390 | IPR | .004–.009 | .005–.010 | .006–.014 | .006–.016 | .008–.019 | .010–.024 | .012–.025 | .013–.026 | |
| S | 1 | 30 | 70 | 100 | IPR | .002–.004 | .002–.004 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .005–.008 |
| 2 | 30 | 70 | 100 | IPR | .002–.004 | .002–.004 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .005–.008 | |
| 3 | 50 | 80 | 110 | IPR | .002–.004 | .002–.004 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .005–.008 | |
| 4 | 70 | 100 | 130 | IPR | .002–.003 | .002–.004 | .002–.004 | .003–.005 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | |
| Malzeme grubu | Kesme hızı | Metrik | |||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
| P | 0 | 70 | 125 | 175 | mm/r | 0,09–0,18 | 0,10–0,21 | 0,12–0,24 | 0,14–0,30 | 0,18–0,36 | 0,23–0,42 | 0,27–0,48 | 0,28–0,50 |
| 1 | 70 | 120 | 170 | mm/r | 0,09–0,18 | 0,10–0,22 | 0,12–0,24 | 0,14–0,30 | 0,18–0,36 | 0,23–0,42 | 0,27–0,48 | 0,28–0,50 | |
| 2 | 90 | 135 | 180 | mm/r | 0,09–0,18 | 0,10–0,25 | 0,12–0,27 | 0,14–0,33 | 0,18–0,39 | 0,23–0,45 | 0,27–0,51 | 0,28–0,50 | |
| 3 | 60 | 95 | 130 | mm/r | 0,09–0,16 | 0,10–0,28 | 0,11–0,29 | 0,13–0,33 | 0,17–0,37 | 0,22–0,41 | 0,28–0,45 | 0,30–0,46 | |
| 4 | 50 | 90 | 130 | mm/r | 0,09–0,16 | 0,10–0,28 | 0,11–0,29 | 0,13–0,33 | 0,17–0,37 | 0,22–0,41 | 0,24–0,45 | 0,25–0,46 | |
| 5 | 30 | 65 | 100 | mm/r | 0,09–0,15 | 0,10–0,18 | 0,10–0,22 | 0,11–0,27 | 0,15–0,32 | 0,19–0,37 | 0,23–0,42 | 0,24–0,43 | |
| 6 | 40 | 60 | 80 | mm/r | 0,09–0,15 | 0,09–0,18 | 0,10–0,22 | 0,10–0,27 | 0,15–0,32 | 0,19–0,37 | 0,23–0,42 | 0,24–0,43 | |
| M | 1 | 20 | 55 | 90 | mm/r | 0,07–0,12 | 0,08–0,13 | 0,08–0,14 | 0,10–0,18 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 |
| 2 | 30 | 60 | 90 | mm/r | 0,07–0,12 | 0,08–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 | |
| 3 | 20 | 40 | 60 | mm/r | 0,07–0,12 | 0,08–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 | |
| K | 1 | 80 | 140 | 200 | mm/r | 0,11–0,26 | 0,13–0,32 | 0,15–0,44 | 0,18–0,49 | 0,25–0,58 | 0,29–0,64 | 0,35–0,70 | 0,36–0,75 |
| 2 | 80 | 130 | 180 | mm/r | 0,11–0,26 | 0,13–0,31 | 0,15–0,36 | 0,18–0,40 | 0,25–0,48 | 0,29–0,60 | 0,35–0,70 | 0,36–0,75 | |
| 3 | 70 | 95 | 120 | mm/r | 0,10-0,22 | 0,12-0,25 | 0,15-0,35 | 0,16-0,40 | 0,20-0,48 | 0,26-0,60 | 0,30-0,63 | 0,32-0,65 | |
| S | 1 | 10 | 20 | 30 | mm/r | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 |
| 2 | 10 | 20 | 30 | mm/r | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 | |
| 3 | 15 | 25 | 35 | mm/r | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 | |
| 4 | 20 | 30 | 40 | mm/r | 0,04–0,07 | 0,05–0,09 | 0,05–0,10 | 0,07–0,12 | 0,08–0,13 | 0,08–0,13 | 0,09–0,15 | 0,10–0,17 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?