DAL Drills • CFRP-Ti-Stacks
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- N Non-Ferrous Materials (5)
- N1Wrought Aluminum (5)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
- N3High-Silicon Aluminum Alloys Si >12.2%(5)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (5)
- S High-Temp Alloys (5)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
- C CFRP Materials (10)
- C2CFRP / Aluminium CFRP / Non-Ferrous (10)
- C3CFRP / Titanium CFRP / High Temp (10)
- C4CFRP / Stainless Steel (10)
Applications
Applications
Drilling (10)
Stacked Plates Drilling (10)
Cutting Diameter
Cutting Diameter
- 0.19 in(2)
- 0.219 in(2)
- 0.25 in(2)
- 0.313 in(2)
- 0.375 in(2)
to
Cutting Diameter
Cutting Diameter
- 4.825 mm(2)
- 5.551 mm(2)
- 6.351 mm(2)
- 7.95 mm(2)
- 9.525 mm(2)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 27.0 mm(2)
- 30.0 mm(8)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.063 in(2)
- 1.181 in(8)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KCC05 (5)
- KDC15 (5)
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(4)
- 8.0 mm(4)
- 10.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.237 in(4)
- 0.315 in(4)
- 0.394 in(2)
to
No filters matching ""
