Country

Lingua

Unità di misura

Suggerimenti sui prodotti

RPEX10-701-X4 • Rettifica di precisione • 4 posizioni • Prima scelta per la sgrossatura di leghe non ferrose e la finitura di leghe resistenti al calore

Name: RPEX10-701-X4 • Rettifica di precisione • 4 posizioni • Prima scelta per la sgrossatura di leghe non ferrose e la finitura di leghe resistenti al calore
SKU: 100038102
Rating: 0 (0 reviews)

Inserti a fissaggio meccanico

Features and benefits

Quattro posizioni di indexaggio:
— Ap max: 5mm
— Ap raccomandato: ≤2,5mm

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	422-X8	SP6519	432-X5	SC6525	422-X4	SP6519
P3–P4	422-X8	SP6519	432-X5	SP6519	422-X4	SP6519
P5–P6	422-X8	SP6519	T-X4	SP6519	T-X4	X500
M1–M2	422-X8	SP6519	432-X5	SC6525	422-X4	SP6519
M3	422-X8	X700	432-X5	SP6519	422-X4	X500
K1–K2	422-X8	SP6519	432-X5	SC6525	T-X4	SP6519
K3	422-X8	SP6519	432-X5	SC6525	T-X4	SP6519
N1–N2	701-X4	GH1	701-X4	GH1	701-X4	GH1
N3	701-X4	GH1	701-X4	GH1	701-X4	GH1
S1–S2	422-X8	X700	432-X5	X500	422-X4	X500
S3	422-X8	X700	432-X5	X500	422-X4	X500
S4	422-X8	X700	432-X5	X500	422-X4	X500
H1	–	–	–	–	–	–

A 5,00 di profondità di taglio assiale (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,12	0,19	0,26	0,08	0,13	0,18	0,06	0,10	0,14	0,05	0,09	0,12	0,05	0,08	0,11	701–X4
422–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	422–X8
432–X5	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X5
422–X4	0,12	0,29	0,57	0,08	0,21	0,40	0,06	0,16	0,30	0,05	0,14	0,26	0,05	0,13	0,24	422–X4
T–X4	0,23	0,41	0,66	0,17	0,30	0,47	0,13	0,22	0,35	0,11	0,19	0,31	0,10	0,18	0,28	T–X4

A 2,50 di profondità di taglio assiale (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,13	0,21	0,30	0,10	0,15	0,21	0,07	0,12	0,16	0,06	0,10	0,14	0,06	0,09	0,13	701–X4
422–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	422–X8
432–X5	0,13	0,34	0,66	0,10	0,24	0,47	0,07	0,18	0,35	0,06	0,16	0,30	0,06	0,15	0,28	432–X5
422–X4	0,13	0,34	0,66	0,10	0,24	0,47	0,07	0,18	0,35	0,06	0,16	0,30	0,06	0,15	0,28	422–X4
T–X4	0,27	0,48	0,77	0,19	0,34	0,55	0,14	0,25	0,41	0,13	0,22	0,35	0,12	0,20	0,32	T–X4

A 2,00 di profondità di taglio assiale (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,16	0,26	0,36	0,12	0,19	0,26	0,09	0,14	0,19	0,08	0,12	0,17	0,07	0,11	0,15	701–X4
422–X8	0,16	0,41	0,80	0,12	0,30	0,57	0,09	0,22	0,42	0,08	0,19	0,37	0,07	0,18	0,34	422–X8
432–X5	0,16	0,41	0,80	0,12	0,30	0,57	0,09	0,22	0,42	0,08	0,19	0,37	0,07	0,18	0,34	432–X5
422–X4	0,16	0,41	0,80	0,12	0,30	0,57	0,09	0,22	0,42	0,08	0,19	0,37	0,07	0,18	0,34	422–X4
T–X4	0,33	0,58	0,94	0,23	0,42	0,67	0,18	0,31	0,49	0,15	0,27	0,43	0,14	0,25	0,39	T–X4

A 1,50 di profondità di taglio assiale (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,14	0,23	0,32	0,10	0,17	0,23	0,08	0,13	0,17	0,07	0,11	0,15	0,06	0,10	0,14	701–X4
422–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	422–X8
432–X5	0,14	0,37	0,71	0,10	0,26	0,51	0,08	0,20	0,38	0,07	0,17	0,33	0,06	0,16	0,30	432–X5
422–X4	0,14	0,37	0,71	0,10	0,26	0,51	0,08	0,20	0,38	0,07	0,17	0,33	0,06	0,16	0,30	422–X4
T–X4	0,29	0,52	0,84	0,21	0,37	0,59	0,16	0,28	0,44	0,14	0,24	0,38	0,13	0,22	0,35	T–X4

Light Machining

General Purpose

Heavy Machining

At .197 Axial Depth of Cut (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	.005	.009	.013	.003	.007	.009	.002	.005	.007	.002	.004	.006	.002	.004	.006	701–X4
422–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	422–X8
432–X5	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X5
422–X4	.005	.012	.023	.003	.008	.016	.002	.006	.012	.002	.006	.010	.002	.005	.010	422–X4
T–X4	.009	.015	.025	.007	.011	.018	.005	.008	.013	.004	.007	.011	.004	.007	.011	T–X4

At .098 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At .079 Axial Depth of Cut (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	.005	.011	.015	.004	.008	.011	.003	.006	.008	.002	.005	.007	.002	.005	.006	701–X4
422–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	422–X8
432–X5	.005	.014	.026	.004	.010	.019	.003	.007	.014	.002	.006	.012	.002	.006	.011	432–X5
422–X4	.005	.014	.026	.004	.010	.019	.003	.007	.014	.002	.006	.012	.002	.006	.011	422–X4
T–X4	.011	.018	.029	.008	.013	.020	.006	.010	.015	.005	.008	.013	.005	.008	.012	T–X4

At .059 Axial Depth of Cut (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
–	5%			10%			20%			30%			40–100%
701–X4	.006	.013	.018	.005	.009	.013	.003	.007	.010	.003	.006	.008	.003	.006	.008	701–X4
422–X8	.006	.017	.032	.005	.012	.023	.003	.009	.017	.003	.008	.015	.003	.007	.013	422–X8
432–X5	.006	.017	.032	.005	.012	.023	.003	.009	.017	.003	.008	.015	.003	.007	.013	432–X5
422–X4	.006	.017	.032	.005	.012	.023	.003	.009	.017	.003	.008	.015	.003	.007	.013	422–X4
T–X4	.013	.022	.035	.009	.016	.025	.007	.012	.018	.006	.010	.016	.006	.009	.015	T–X4

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	.006	.012	.016	.004	.008	.012	.003	.006	.009	.003	.005	.008	.002	.005	.007	701–X4
422–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	422–X8
432–X5	.006	.015	.029	.004	.011	.020	.003	.008	.015	.003	.007	.013	.002	.006	.012	432–X5
422–X4	.006	.015	.029	.004	.011	.020	.003	.008	.015	.003	.007	.013	.002	.006	.012	422–X4
T–X4	.011	.019	.031	.008	.014	.022	.006	.010	.016	.005	.009	.014	.005	.008	.013	T–X4

Velocità iniziali consigliate [m/min]

Material Group		GH1			X700			SP6519			SP4019			X500			MP91M			SC6525
P	1	–	–	–	–	–	–	130	213	295	140	228	315	130	200	270	140	243	345	140	255	370
	2	–	–	–	–	–	–	115	188	260	120	198	275	115	178	240	120	213	305	120	223	325
	3	–	–	–	–	–	–	100	165	230	105	175	245	100	155	210	105	188	270	105	198	290
	4	–	–	–	–	–	–	75	125	175	80	135	190	75	118	160	80	143	205	80	145	210
	5	–	–	–	70	103	135	70	105	140	70	110	150	70	100	130	–	–	–	80	120	160
	6	–	–	–	50	83	115	50	85	120	50	90	130	50	80	110	–	–	–	60	100	140
M	1	–	–	–	115	188	260	115	193	270	120	200	280	115	183	250	–	–	–	120	205	290
	2	–	–	–	105	168	230	105	170	235	110	180	250	100	160	220	–	–	–	110	185	260
	3	–	–	–	85	138	190	85	140	195	90	145	200	80	130	180	–	–	–	90	150	210
K	1	135	213	290	–	–	–	140	218	295	145	238	330	120	200	280	145	255	365	145	268	390
	2	120	183	245	–	–	–	110	175	240	115	185	255	105	155	205	115	200	285	115	210	305
	3	115	158	200	–	–	–	100	160	220	105	170	235	95	133	170	105	183	260	–	–	–
N	1–2	400	1725	3050	–	–	–	–	–	–	400	1648	2895	–	–	–	–	–	–	–	–	–
	3	295	1368	2440	–	–	–	–	–	–	295	1308	2320	–	–	–	–	–	–	–	–	–
S	1	–	–	–	23	38	52	23	39	55	24	44	63	23	36	48	–	–	–	–	–	–
	2	–	–	–	22	34	46	22	35	48	23	38	52	21	33	44	–	–	–	–	–	–
	3	–	–	–	25	39	53	25	40	55	26	43	59	24	38	51	–	–	–	–	–	–
	4	–	–	–	36	56	75	36	58	79	37	61	84	35	54	73	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	50	75	100	–	–	–	50	78	105	50	80	110

Recommended Starting Speeds [SFM]

Material Group		GH1			X700			SP6519			SP4019			X500			MP91M			SC6525
P	1	–	–	–	–	–	–	426	697	968	459	746	1033	426	656	886	459	795	1132	459	836	1214
	2	–	–	–	–	–	–	377	615	853	394	648	902	377	582	787	394	697	1000	394	730	1066
	3	–	–	–	–	–	–	328	541	754	344	574	804	328	508	689	344	615	886	344	648	951
	4	–	–	–	–	–	–	246	410	574	262	443	623	246	385	525	262	467	672	262	476	689
	5	–	–	–	230	338	443	246	410	574	230	361	492	230	328	426	–	–	–	262	394	525
	6	–	–	–	164	272	377	230	344	459	164	295	426	164	262	361	–	–	–	197	328	459
M	1	–	–	–	377	615	853	377	631	886	394	656	918	377	599	820	–	–	–	394	672	951
	2	–	–	–	344	549	754	344	558	771	361	590	820	328	525	722	–	–	–	361	607	853
	3	–	–	–	279	451	623	279	459	640	295	476	656	262	426	590	–	–	–	295	492	689
K	1	443	697	951	–	–	–	459	713	968	476	779	1082	394	656	918	476	836	1197	476	877	1279
	2	394	599	804	–	–	–	361	574	787	377	607	836	344	508	672	377	656	935	377	689	1000
	3	377	517	656	–	–	–	328	525	722	344	558	771	312	435	558	344	599	853	–	–	–
N	1–2	1312	5658	10004	–	–	–	–	–	–	1312	5404	9496	–	–	–	–	–	–	–	–	–
	3	968	4485	8003	–	–	–	–	–	–	968	4289	7610	–	–	–	–	–	–	–	–	–
S	1	–	–	–	75	123	171	75	128	180	79	143	207	75	116	157	–	–	–	–	–	–
	2	–	–	–	72	112	151	72	115	157	75	123	171	69	107	144	–	–	–	–	–	–
	3	–	–	–	82	128	174	82	131	180	85	139	194	79	123	167	–	–	–	–	–	–
	4	–	–	–	118	182	246	118	189	259	121	198	276	115	177	239	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	164	246	328	–	–	–	164	254	344	164	262	361

Benvenuto

Conferma le tue preferenze

Aggiorna preferenze

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Contatta il Team di vendita

Modifica della soluzione

Soluzione aggiunta

RPEX10-701-X4 • Rettifica di precisione • 4 posizioni • Prima scelta per la sgrossatura di leghe non ferrose e la finitura di leghe resistenti al calore

Inserti a fissaggio meccanico

Features and benefits

A 5,00 di profondità di taglio assiale (ap)

A 2,50 di profondità di taglio assiale (ap)

A 2,00 di profondità di taglio assiale (ap)

A 1,50 di profondità di taglio assiale (ap)

At .197 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .079 Axial Depth of Cut (ap)

At .059 Axial Depth of Cut (ap)

Velocità iniziali consigliate [m/min]

Recommended Starting Speeds [SFM]

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Notifications

Contatta il Team di vendita

Sending to {{cadTool}} in progress...

RPEX10-701-X4 • Rettifica di precisione • 4 posizioni • Prima scelta per la sgrossatura di leghe non ferrose e la finitura di leghe resistenti al calore

Inserti a fissaggio meccanico

Features and benefits

A 5,00 di profondità di taglio assiale (ap)

A 2,50 di profondità di taglio assiale (ap)

A 2,00 di profondità di taglio assiale (ap)

A 1,50 di profondità di taglio assiale (ap)

At .197 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .079 Axial Depth of Cut (ap)

At .059 Axial Depth of Cut (ap)

Velocità iniziali consigliate [m/min]

Recommended Starting Speeds [SFM]

The following files are available