Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (47)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(47)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(47)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(47)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(47)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(47)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(47)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(47)
- M Stainless Steel (47)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(47)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(47)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(47)
- K Cast Iron (47)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(47)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(47)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(47)
- S High-Temp Alloys (7)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(7)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(7)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(7)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(7)
- H Hardened Materials (40)
- H1Hardened Materials 44-48 HRC(40)
Applications
Applications
ID Thread Turning (39)
OD Thread Turning (22)
Type of Thread
Type of Thread
- BSW (7)
- M (14)
- NPS (2)
- NPT (3)
- NPTF (3)
- UN (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 2.0 (43)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC610M (7)
- KC635M (40)
Countersunk Angle
Countersunk Angle
- 27.5 (7)
- 30.0 (40)
to
Front-End
Cutting Width
Cutting Width
- 0.33 in(1)
- 0.34 in(1)
- 0.351 in(3)
- 0.36 in(1)
- 0.37 in(1)
- 0.38 in(3)
- 0.39 in(5)
- 0.4 in(1)
- 0.411 in(1)
- 0.52 in(3)
- 0.55 in(5)
- 0.56 in(3)
- 0.571 in(7)
- 0.58 in(4)
- 0.59 in(4)
- 0.709 in(1)
- 0.91 in(1)
- 0.941 in(1)
- 0.965 in(1)
to
Cutting Width
Cutting Width
- 8.375 mm(1)
- 8.625 mm(1)
- 8.9 mm(3)
- 9.15 mm(1)
- 9.4 mm(1)
- 9.65 mm(3)
- 9.9 mm(5)
- 10.15 mm(1)
- 10.425 mm(1)
- 13.201 mm(3)
- 13.976 mm(5)
- 14.226 mm(3)
- 14.476 mm(7)
- 14.726 mm(4)
- 14.976 mm(4)
- 18.0 mm(1)
- 23.125 mm(1)
- 23.875 mm(1)
- 24.5 mm(1)
to
Thread TPI
Thread TPI
- 11.0 (3)
- 11.5 (3)
- 12.0 (2)
- 14.0 (8)
- 16.0 (3)
- 18.0 (5)
- 19.0 (1)
- 20.0 (3)
- 24.0 (3)
- 27.0 (1)
- 32.0 (1)
to
Thread Pitch
Thread Pitch
- 0.75 mm(1)
- 1.0 mm(3)
- 1.25 mm(1)
- 1.5 mm(4)
- 1.75 mm(1)
- 2.0 mm(2)
- 3.0 mm(1)
- 3.5 mm(1)
to
Thread Pitch
Thread Pitch
- 0.03 in(1)
- 0.039 in(3)
- 0.049 in(1)
- 0.06 in(4)
- 0.069 in(1)
- 0.079 in(2)
- 0.119 in(1)
- 0.138 in(1)
to
Insert Geometry
Insert IC Size
Insert IC Size
- 6.0 mm(6)
- 6.351 mm(11)
- 9.525 mm(26)
- 12.701 mm(1)
- 15.875 mm(3)
to
Insert IC Size
Insert IC Size
- 0.237 in(6)
- 0.25 in(11)
- 0.375 in(26)
- 0.5 in(1)
- 0.625 in(3)
to
No filters matching ""
