欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

项目 已成功添加到购物车
查看购物车
Exit Search 回到解决方案

编辑解决方案

添加解决方案

解决方案名称:{{SolutionName}}

    产品类似于:

    返回到 | 修改类似于

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric

    Drill Fix™ DFR™ 刀体

    物料号100003979

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Open expanded view
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    通用表示形式
    请联系我们的销售人员来了解您的定价。

    Features and benefits

    • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.
    • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.
    • Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
    • Drill shipped with insert screws and Torx wrench.
    • 钻孔钻孔
    • 钻孔： 斜切进刀钻孔： 斜切进刀
    • 钻孔： 斜退刀钻孔： 斜退刀
    • 钻孔： X－偏移钻孔： X－偏移
    • 钻孔： 凸面钻孔： 凸面
    • Shank: KM-TS™ ISO 26622Shank: KM-TS™ ISO 26622
    • 贯通式冷却： 径向： 可转位钻孔贯通式冷却： 径向： 可转位钻孔
    • 钻孔： 盲孔钻孔： 盲孔
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    警告 • Drill Fix DFR

    警告 在通孔加工中、刀具在穿过工件时会产生块状或圆盘状物体。在钻头处于静止状态、工件处于旋转状态时、 块状物或圆盘状物会因离心力而从夹具上飞出。应提供有效的防护措施。

    Dimensions • DFR Whistle Notch (WD) Shank

    DLS
    2045
    2545
    3258

    Dimensions • DFR Weldon® 刀杆 • DIN 1835-1 型 B

    DLS
    2050
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360毫米/转0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230毫米/转0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150毫米/转0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOMDKC7140150180210毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC714080110140毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    1SIMDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    1UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    1UIMDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    1IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    1IIMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    2SILDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    2UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    2UILDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    2IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2IILDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    3SILDKC7140260285320mm/r0,09–0,150,11–0,180,15–0,25
    3UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    3UILDKC7140180195220mm/r0,09–0,150,11–0,180,15–0,25
    3IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    3IILDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    4SILDKC7140220250300mm/r0,09–0,150,11–0,180,15–0,25
    4UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    4UILDKC7140150180220mm/r0,09–0,150,11–0,180,15–0,25
    4IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    4IILDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    5SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    5UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    5UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    5IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    5IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    6SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    6UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    6UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    6IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360毫米/转0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230毫米/转0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150毫米/转0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140毫米/转0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100毫米/转0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230毫米/转0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC7140100130160毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100毫米/转0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    2SOMDKC7140150180210毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160毫米/转0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    IOMDKC71406080100毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160毫米/转0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC714080110140毫米/转0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090毫米/转0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值 Ø DFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    M1SOMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1SIMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2SIMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    3SOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3SIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3UIMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3IOMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    5SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOGDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    IGDKCU40
    IOGDKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    IGDKMF
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值 Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1SILDKCU40200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1UILDKC7140120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    1IILDKC714080100125mm/tr0,10–0,180,12–0,200,14–0,24
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    2IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120毫米/转0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800毫米/转0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40300400500毫米/转0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400毫米/转0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    2SOSTKD1425375550775毫米/转0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450毫米/转0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40175250325毫米/转0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650毫米/转0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40250350450毫米/转0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350毫米/转0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    4SOSTKD1425400600800毫米/转0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450毫米/转0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40200300400毫米/转0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800毫米/转0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOHPKCU40250350450毫米/转0,07–0,090,10–0,140,12–0,16
    IHPKCU40
    IOHPKMF200300400毫米/转0,07-0,090,10-0,140,12-0,16
    IHPKMF
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值 Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1UILDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    1IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2SISTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    2IILDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3SISTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    3IILDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    4IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6UOHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6UIHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6IOHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    6IIHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值 Ø DFR02... 12,50 16,00mmDFR03... 16,50 20,00mmDFR04... 20,50 24,00mm
    S1SOGDKCU40607075毫米/转0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40405060毫米/转0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040毫米/转0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOGDKCU40506070毫米/转0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40304050毫米/转0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040毫米/转0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOGDKCU40708090毫米/转0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070毫米/转0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050毫米/转0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    4SOGDKCU40708090毫米/转0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070毫米/转0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050毫米/转0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值 Ø DFR02... 12,50-16,00 mmDFR03... 16,50-20,00 mmDFR04... 20,50-24,00 mm
    S1SOGDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1SILDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1UOGDKCU40405060mm/r0,04–0,060,05–0,080,06–0,10
    1UILDKC7140405060mm/r0,04–0,060,05–0,080,06–0,10
    1IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2SOGDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2SILDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2UOGDKCU40304050mm/r0,04–0,060,05–0,080,06–0,10
    2UILDKC7140304050mm/r0,04–0,060,05–0,080,06–0,10
    2IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    3SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    3UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    3IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    3IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    4UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    4IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10

    DFR™ • PCD • 公制

    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØDFR04 20,50–24,00mm
    N1SOSTKD1425396720841毫米/转0,06–0,08
    ISTKD1425
    2SOSTKD1425369670782毫米/转0,12–0,18
    ISTKD1425
    3SOSTKD1425341619723毫米/转0,12–0,18
    ISTKD1425
    4SOSTKD1425475720841毫米/转0,12–0,18
    ISTKD1425
    5SOSTKD1425480720864毫米/转0,06–0,08
    ISTKD1425
    英制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围－SFM
    最小值初始值最大值ØDFR04 .813"–1.00"
    N1SOSTKD1425130023622760IPR.002–.003
    ISTKD1425
    2SOSTKD1425120921972567IPR.005–.007
    ISTKD1425
    3SOSTKD1425111820322374IPR.005–.007
    ISTKD1425
    4SOSTKD1425156023622760IPR.005–.007
    ISTKD1425
    5SOSTKD1425157523622834IPR.002–.003
    ISTKD1425
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    1SISTKD1425396720841mm/r0,06–0,08
    2SOSTKD1425369670782mm/r0,12–0,18
    2SISTKD1425369670782mm/r0,12–0,18
    3SOSTKD1425341619723mm/r0,12–0,18
    3SISTKD1425341619723mm/r0,12–0,18
    4SOSTKD1425475720841mm/r0,12–0,18
    4SISTKD1425475720841mm/r0,12–0,18
    5SOSTKD1425480720864mm/r0,06–0,08
    5SISTKD1425480720864mm/r0,06–0,08
    您即将把 添加至“我的解决方案”页面. 是否要继续？
    Select the destination where you want to move 到.
    最新 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    请输入一个有效名称
    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    应记录以查看仪表盘信息
    Session expired due to inactivity, please login again
    您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
    件物品已成功添加到购物车
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk