欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

项目 已成功添加到购物车
查看购物车
Exit Search 回到解决方案

编辑解决方案

添加解决方案

解决方案名称:{{SolutionName}}

    产品类似于:

    返回到 | 修改类似于

    KSEM PLUS™ • 外侧刀片 • DFT-HP 槽型

    模块化钻孔 • 适用于 KSEM PLUS™ A1 刀头的硬质合金刀片

    物料号100040176

    KSEM PLUS™ • 外侧刀片 • DFT-HP 槽型
    KSEM PLUS™ • 外侧刀片 • DFT-HP 槽型
    KSEM PLUS™ • 外侧刀片 • DFT-HP 槽型
    Open expanded view
    KSEM PLUS™ • 外侧刀片 • DFT-HP 槽型
    KSEM PLUS™ • 外侧刀片 • DFT-HP 槽型
    通用表示形式
    请联系我们的销售人员来了解您的定价。

    Features and benefits

    • 主要用于在钢、铸铁和高温合金的钻头刀片。
    • 三个切削刃。
    • 适用于直径范围为 31,75-101,60 毫米 (1.250-4.000") 的外侧刀片
      D1公差 h8 + / -
      .500–.709+.000/-.0010
      .709–1.181+.000/-.0013
      1.181–1.575+.000/-.0015
      D1公差 h8 + / -
      12,5–18+0,000/-0,027
      18–30+0,000/-0,033
      30–40+0,000/-0,039
      公制
      材料 分组条件切削速度 vc根据直径推荐进给率（fz）
      范围 m/min
      最小值初始值最大值ØKSEM 14….17 DFR/DFC04... 28.00 31,74KSEM 15….18 DFT/DFC05… 31,74 35,99KSEM 13….22 DFT/DFC06... 36,00 44,99KSEM 18….28 DFT/DFC07... 45,00 55,99KSEM 20….34 DFT/DFC09... 56,00 70
      P1S115235290毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U90160215毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I65100140毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      2S90190230毫米/转0,160–0,2800,160–0,2800,200–0,3600,200–0,4000,200–0,450
      U71130170毫米/转0,160–0,2800,160–0,2800,200–0,3600,200–0,4000,200–0,450
      I5080110毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      3S90180230毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U70120170毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I5070106毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      4S90140220毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U70110160毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I5080110毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      5S90130210毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U70100150毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I5070100毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      6S7090180毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U5075120毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I4060100毫米/转0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      M1S60110135毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U407090毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I305065毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      2S60100135毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U406090毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I305065毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      3S5090135毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U406090毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I254065毫米/转0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      K1S90170230毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      U60120160毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      I407090毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      2S90160220毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      U60110160毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      I4070100毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      3S90150210毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      U60100150毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      I356090毫米/转0,180 0,3000,180 0,3000,216 0,3600,240 0,4200,300 0,480
      N1S150240360毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100160240毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I60100160毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      2S150220360毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100150240毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I60100160毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      3S150200360毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      4S150200360毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      5S150200360毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      6S150200360毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      7S110220260毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U70140170毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I4590110毫米/转0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      S1S255075毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      U204060毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      I153050毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      2S204060毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      U153045毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      I122535毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      3S204060毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      U153045毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      I122540毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      4S204060毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      U153045毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      I122540毫米/转0,130 0,2500,130 0,2500,160 0,2800,160 0,3200,200 0,360
      英制
      材料 分组条件切削速度 vc根据直径推荐进给率（fz）
      范围－SFM
      最小值初始值最大值ØKSEM 14….17 DFR/DFC04... 1.102 1.249KSEM 15….18 DFT/DFC05… 1.250 1.416KSEM 13….22 DFT/DFC06... 1.417 1.771KSEM 18….28 DFT/DFC07... 1.772 2.204KSEM 20….34 DFT/DFC09... 2.205 4.0295
      P1S370775944IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      U290532698IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      I205327451IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      2S295623755IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      U233427558IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      I164262361IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      3S295591755IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      U230394558IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      I164230361IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      4S295459722IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      U230361525IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      I264262361IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      5S295427689IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      U230328689IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      I164230492IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      6S230295591IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      U164246394IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      I131197328IPR0.006–0.0110.006–0.0110.008–0.0140.008–0.0160.008–0.018
      M1S197361443IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      U131230295IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      I98164213IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      2S197328443IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      U131197295IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      I98164213IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      3S164295443IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      U131197295IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      I82131213IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      K1S295558755IPR0.007-0.0120.007-0.0120.009-0.0140.009-0.0170.012-0.019
      U197394525IPR0.007–0.0120.007–0.0120.009–0.0140.009–0.0170.012–0.019
      I131230295IPR0.007-0.0120.007-0.0120.009-0.0140.009-0.0170.012-0.019
      2S295525722IPR0.007–0.0120.007–0.0120.009–0.0140.009–0.0170.012–0.019
      U197361525IPR0.007-0.0120.007-0.0120.009-0.0140.009-0.0170.012-0.019
      I131230328IPR0.007–0.0120.007–0.0120.009–0.0140.009–0.0170.012–0.019
      3S295492689IPR0.007-0.0120.007-0.0120.009-0.0140.009-0.0170.012-0.019
      U197328492IPR0.007–0.0120.007–0.0120.009–0.0140.009–0.0170.012–0.019
      I115197295IPR0.007-0.0120.007-0.0120.009-0.0140.009-0.0170.012-0.019
      N1S4927871181IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U328525787IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I197328525IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      2S4927221181IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U328492787IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I197328525IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      3S4927221181IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U328492787IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I197328525IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      4S4927221181IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U328492787IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I197328525IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      5S4927221181IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U328492787IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I197328525IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      6S4926561181IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U328459787IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I197295525IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      7S361722853IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      U230459558IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      I148295361IPR0.005–0.0080.005–0.0080.006–0.0110.006–0.0130.008–0.016
      S1S82164246IPR0.005-0.0100.005-0.0100.006-0.0110.006-0.0130.008-0.014
      U66131197IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      I4998164IPR0.005-0.0100.005-0.0100.006-0.0110.006-0.0130.008-0.014
      2S66131197IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      U4998148IPR0.005-0.0100.005-0.0100.006-0.0110.006-0.0130.008-0.014
      I3982115IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      3S66131197IPR0.005-0.0100.005-0.0100.006-0.0110.006-0.0130.008-0.014
      U4998148IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      I3982131IPR0.005-0.0100.005-0.0100.006-0.0110.006-0.0130.008-0.014
      4S66131197IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      U4998148IPR0.005-0.0100.005-0.0100.006-0.0110.006-0.0130.008-0.014
      I3982131IPR0.005–0.0100.005–0.0100.006–0.0110.006–0.0130.008–0.014
      公制
      条件切削速度 vc
      范围 m/min根据直径推荐进给率（fz）
      材料 分组最小值初始值最大值ØKSEM 14….17 DFR/DFC04... 28,00 31,74KSEM 15….18 DFT/DFC05… 31,75 35,99KSEM 13….22 DFT/DFC06... 36,00 44,99KSEM 18….28 DFT/DFC07... 45,00 55,99KSEM 20….34 DFT/DFC09... 56,00 70,00
      P1S115235290mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U90160215mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I65100140mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      2S90190230mm/dev0,160–0,2800,160–0,2800,200–0,3600,200–0,4000,200–0,450
      U71130170mm/dev0,160–0,2800,160–0,2800,200–0,3600,200–0,4000,200–0,450
      I5080110mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      3S90180230mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U70120170mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I5070106mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      4S90140220mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U70110160mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I5080110mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      5S90130210mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U70100150mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I5070100mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      6S7090180mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      U5075120mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      I4060100mm/dev0,160–0,2800,160–0,2800,200–0,3200,200–0,4000,200–0,450
      M1S60110135mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U407090mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I305065mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      2S60100135mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U406090mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I305065mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      3S5090135mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U406090mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I254065mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      K1S90170230mm/dev0,180 - 0,3000,180 - 0,3000,216 - 0,3600,240 - 0,4200,300 - 0,480
      U60120160mm/dev0,180–0,3000,180–0,3000,216–0,3600,240–0,4200,300–0,480
      I407090mm/dev0,180 - 0,3000,180 - 0,3000,216 - 0,3600,240 - 0,4200,300 - 0,480
      2S90160220mm/dev0,180–0,3000,180–0,3000,216–0,3600,240–0,4200,300–0,480
      U60110160mm/dev0,180 - 0,3000,180 - 0,3000,216 - 0,3600,240 - 0,4200,300 - 0,480
      I4070100mm/dev0,180–0,3000,180–0,3000,216–0,3600,240–0,4200,300–0,480
      3S90150210mm/dev0,180 - 0,3000,180 - 0,3000,216 - 0,3600,240 - 0,4200,300 - 0,480
      U60100150mm/dev0,180–0,3000,180–0,3000,216–0,3600,240–0,4200,300–0,480
      I356090mm/dev0,180 - 0,3000,180 - 0,3000,216 - 0,3600,240 - 0,4200,300 - 0,480
      N1S150240360mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100160240mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I60100160mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      2S150220360mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100150240mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I60100160mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      3S150200360mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      4S150200360mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      5S150200360mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      6S150200360mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U100140240mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I6090160mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      7S110220260mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      U70140170mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      I4590110mm/dev0,120–0,2000,120–0,2000,144–0,2800,160–0,3200,200–0,400
      S1S255075mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U204060mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I153050mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      2S204060mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U153045mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I122535mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      3S204060mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U153045mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I122540mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      4S204060mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      U153045mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      I122540mm/dev0,130–0,2500,130–0,2500,160–0,2800,160–0,3200,200–0,360
      您即将把 添加至“我的解决方案”页面. 是否要继续？
      Select the destination where you want to move 到.
      最新 Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      请输入一个有效名称
      product-image
      Please adjust the following properties from

      ISO Catalog

      ANSI Catalog

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      应记录以查看仪表盘信息
      Session expired due to inactivity, please login again
      您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
      件物品已成功添加到购物车
      View Cart

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number ISO Catalog Grade  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk