KM63TS™
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (263)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(261)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(261)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(261)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(261)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(261)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(263)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(263)
- M Stainless Steel (261)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(261)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(261)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(261)
- K Cast Iron (272)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(272)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(272)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(272)
- N Non-Ferrous Materials (265)
- N1Wrought Aluminum (262)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(262)
- N3High-Silicon Aluminum Alloys Si >12.2%(164)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (265)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (262)
- N6Carbon, Graphite Composites, CFRP (260)
- N7MMC's (239)
- S High-Temp Alloys (272)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(272)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(272)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(272)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(266)
- H Hardened Materials (254)
- H1Hardened Materials 44-48 HRC(254)
- H2Hardened Materials 48-55 HRC(254)
- H3Hardened Materials 56-60 HRC(219)
- H4Hardened Materials >60 HRC(201)
- C CFRP Materials (244)
- C1CFRP, CFRP / CFRP (242)
- C2CFRP / Aluminium CFRP / Non-Ferrous (222)
Applications
Applications
Chamfer Turning (4)
Cut-Off (4)
Deep Grooving (4)
Face Grooving (4)
Facing (202)
Grooving (11)
ID Grooving (7)
ID Thread Turning (15)
Multiple Direction Cutting (188)
OD Thread Turning (19)
Plunge Turning (4)
Profiling (131)
TRN Boring (176)
Threading (22)
Turning (246)
Type of Thread
Type of Thread
- 55 (8)
- 60 (18)
- ACME (18)
- API (14)
- API BUTTRESS (4)
- API RD (10)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (14)
- NPT (10)
- NPTF (4)
- RD DIN 405 (8)
- STUB ACME (14)
- TR DIN 103 (8)
- UN (14)
- UNJ (10)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (262)
- Lightly Interrupted Cut (262)
- Smooth Cut (262)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (21)
- 48.0 (6)
- 49.783 (1)
- 50.0 (1)
- 62.5 (2)
- 63.0 (4)
- 72.5 (1)
- 75.0 (48)
- 90.0 (43)
- 93.0 (69)
- 95.0 (68)
- 107.5 (18)
komu
Connection Style
Connection Style
- KM (155)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (11)
- 1.0 (152)
- 2.0 (174)
- 3.0 (43)
- 4.0 (196)
- 6.0 (35)
- 8.0 (126)
komu
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.362 in(217)
- 3.15 in(2)
- 3.543 in(3)
- 3.938 in(4)
- 4.529 in(8)
- 4.921 in(14)
- 5.513 in(25)
- 6.694 in(9)
komu
Over All Length [L]
Over All Length [L]
- 60.0 mm(217)
- 80.0 mm(2)
- 90.0 mm(3)
- 100.0 mm(4)
- 115.0 mm(8)
- 125.0 mm(14)
- 140.0 mm(25)
- 170.0 mm(9)
komu
Corner Radius
Corner Radius
- 0.001 in(3)
- 0.002 in(18)
- 0.003 in(14)
- 0.004 in(154)
- 0.005 in(7)
- 0.006 in(13)
- 0.007 in(11)
- 0.008 in(138)
- 0.01 in(11)
- 0.011 in(8)
- 0.012 in(9)
- 0.014 in(46)
- 0.015 in(1)
- 0.016 in(215)
- 0.017 in(4)
- 0.019 in(10)
- 0.02 in(6)
- 0.021 in(2)
- 0.023 in(11)
- 0.024 in(15)
- 0.028 in(1)
- 0.03 in(1)
- 0.031 in(256)
- 0.033 in(1)
- 0.035 in(10)
- 0.037 in(2)
- -0.039 in(11)
- 0.039 in(7)
- 0.047 in(256)
- 0.049 in(6)
- 0.055 in(1)
- 0.06 in(7)
- 0.062 in(44)
- 0.063 in(229)
- 0.069 in(6)
- 0.078 in(6)
- 0.079 in(10)
- 0.089 in(10)
- 0.094 in(47)
- 0.095 in(98)
- 0.098 in(4)
- 0.125 in(15)
- 0.126 in(47)
- 0.157 in(14)
- 0.25 in(4)
- 0.315 in(1)
komu
Corner Radius
Corner Radius
- 0.025 mm(3)
- 0.05 mm(18)
- 0.076 mm(14)
- 0.1 mm(154)
- 0.125 mm(7)
- 0.151 mm(13)
- 0.176 mm(11)
- 0.2 mm(138)
- 0.225 mm(7)
- 0.25 mm(11)
- 0.275 mm(8)
- 0.301 mm(9)
- 0.325 mm(12)
- 0.351 mm(44)
- 0.375 mm(1)
- 0.4 mm(215)
- 0.426 mm(4)
- 0.45 mm(10)
- 0.476 mm(3)
- 0.5 mm(6)
- 0.525 mm(2)
- 0.576 mm(11)
- 0.601 mm(15)
- 0.701 mm(1)
- 0.75 mm(1)
- 0.775 mm(6)
- 0.8 mm(250)
- 0.826 mm(1)
- 0.9 mm(10)
- 0.925 mm(2)
- -1.0 mm(11)
- 1.0 mm(7)
- 1.201 mm(256)
- 1.25 mm(6)
- 1.401 mm(1)
- 1.5 mm(6)
- 1.526 mm(1)
- 1.576 mm(44)
- 1.6 mm(229)
- 1.75 mm(6)
- 1.975 mm(6)
- 2.0 mm(10)
- 2.25 mm(10)
- 2.375 mm(47)
- 2.401 mm(98)
- 2.5 mm(4)
- 3.176 mm(15)
- 3.2 mm(47)
- 4.0 mm(14)
- 6.351 mm(4)
- 8.0 mm(1)
komu
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (170)
- 241 (38)
- AC5 (3)
- CL4 (120)
- CM2 (174)
- CM3 (131)
- CM4 (78)
- CPX (175)
- CW2 (76)
- CW2015 (153)
- CW3020 (9)
- CW5025 (169)
- GH1 (2)
- GX (93)
- HCK10 (5)
- HCK20 (1)
- HK1500 (115)
- HK35 (5)
- HT2 (92)
- HTX (53)
- HWK15 (5)
- K00326 (8)
- K00331 (2)
- K060 (99)
- K090 (209)
- K1 (73)
- K1010P (2)
- K10M (212)
- K10P (195)
- K10U (167)
- K15 (3)
- K15U (167)
- K20K (221)
- K21 (99)
- K25M (188)
- K25P (194)
- K2885 (6)
- K313 (252)
- K35P (142)
- K420 (176)
- K45 (110)
- K4H (6)
- K6 (3)
- K68 (233)
- K8735 (8)
- KB1340 (74)
- KB1345 (85)
- KB1610 (118)
- KB1625 (107)
- KB1630 (92)
- KB5610 (98)
- KB5625 (113)
- KB5630 (79)
- KB9610 (156)
- KB9640 (91)
- KBH10 (152)
- KBH10B (113)
- KBH20 (162)
- KBH20B (113)
- KBK35 (42)
- KBK45 (7)
- KC210 (155)
- KC250 (155)
- KC5010 (256)
- KC5020P (4)
- KC5025 (258)
- KC5410 (229)
- KC5510 (220)
- KC5525 (138)
- KC710 (54)
- KC720 (190)
- KC722 (50)
- KC730 (214)
- KC7310 (227)
- KC732 (166)
- KC8050 (242)
- KC810 (255)
- KC850 (256)
- KC9010 (221)
- KC9025 (241)
- KC910 (241)
- KC9105 (224)
- KC9110 (251)
- KC9120 (243)
- KC9125 (241)
- KC9125RR (20)
- KC9140 (222)
- KC9145 (207)
- KC9210 (34)
- KC9215 (219)
- KC9225 (239)
- KC9240 (232)
- KC9240NEW (232)
- KC9245 (220)
- KC9315 (242)
- KC9320 (242)
- KC9325 (231)
- KC935 (251)
- KC950 (240)
- KC990 (233)
- KCD25 (47)
- KCK05 (240)
- KCK05B (216)
- KCK15 (233)
- KCK15B (240)
- KCK20 (244)
- KCK20B (244)
- KCM15 (231)
- KCM15B (221)
- KCM25 (240)
- KCM25B (231)
- KCM25S (2)
- KCM35 (222)
- KCM35B (168)
- KCP05 (205)
- KCP05B (172)
- KCP10 (241)
- KCP10B (251)
- KCP15 (2)
- KCP20S (2)
- KCP25 (242)
- KCP25B (251)
- KCP25C (242)
- KCP30 (233)
- KCP30B (205)
- KCP40 (200)
- KCP40B (215)
- KCPK05 (217)
- KCS10 (49)
- KCS10B (226)
- KCS25S (2)
- KCU10 (252)
- KCU10B (252)
- KCU25 (250)
- KCU25B (245)
- KD050 (123)
- KD081 (126)
- KD100 (96)
- KD120 (130)
- KD1400 (102)
- KD1405 (77)
- KD1425 (116)
- KM1 (87)
- KMF (38)
- KN10S (2)
- KS15 (46)
- KT1120 (41)
- KT125 (154)
- KT150 (107)
- KT175 (154)
- KT315 (199)
- KT325 (96)
- KT5020 (13)
- KTP10 (167)
- KTP25S (136)
- KU10 (4)
- KU10T (191)
- KU25T (12)
- KU30T (243)
- KY1310 (141)
- KY1320 (205)
- KY1525 (9)
- KY1540 (121)
- KY1615 (186)
- KY2000 (129)
- KY2100 (95)
- KY2200 (3)
- KY3000 (215)
- KY3400 (176)
- KY3500 (221)
- KY4000 (86)
- KY4300 (101)
- KY4400 (198)
- KYHK15B (196)
- KYK10 (114)
- KYK25 (162)
- KYK35 (219)
- KYS25 (107)
- KYS30 (122)
- MC2 (5)
- MC3 (2)
- NL200 (72)
- NL250 (218)
- NL300 (160)
- NL400 (79)
- NL920 (161)
- P25 (72)
- PB100 (40)
- PB170 (41)
- PB250 (43)
- PB300 (34)
- PD100 (5)
- PD50 (5)
- PN120 (1)
- PS5 (81)
- SP0819 (151)
- SP0A00 (16)
- SP0PW3 (3)
- SP3019 (128)
- SP4019 (143)
- SP4036 (9)
- SP4066 (1)
- SP4093 (9)
- SP61EJ (20)
- SPADAP (24)
- SPN4W2 (14)
- SPSREJ (9)
- THM (98)
- THM-X (81)
- THMF-X (51)
- TN10P (186)
- TN10U (141)
- TN15M (182)
- TN15U (138)
- TN2000 (132)
- TN20K (194)
- TN20P (203)
- TN30M (191)
- TN30P (170)
- TN4000 (127)
- TN5015 (182)
- TN5020 (158)
- TN5105 (139)
- TN5120 (180)
- TN6010 (113)
- TN6025 (117)
- TN7005 (115)
- TN7010 (192)
- TN7015 (193)
- TN7025 (190)
- TN7035 (159)
- TN7105 (102)
- TN7110 (179)
- TN7115 (180)
- TN7125 (168)
- TN7135 (159)
- TN8025 (180)
- TTI15 (76)
- TTM (6)
- TTM09 (41)
- TTR (62)
- TTR-X (14)
- TTS (105)
- TTX (77)
- W00342 (20)
- WBH10C (124)
- WBH10P (69)
- WBH10U (99)
- WBH20P (133)
- WBH25P (86)
- WBH25U (110)
- WBH30P (69)
- WBK40U (63)
- WBK45U (98)
- WDN00U (56)
- WDN25U (90)
- WK05CT (200)
- WK15CT (115)
- WK20CT (206)
- WM15CT (201)
- WM25CT (201)
- WM35CT (190)
- WP05CT (47)
- WP15CT (203)
- WP20TT (11)
- WP25CT (203)
- WP35CT (199)
- WS10PT (189)
- WS25PT (196)
- WU05PT (9)
- WU10HT (190)
- WU10PT (128)
- WU25PT (127)
- X00511 (38)
- X00580 (38)
- X00581 (38)
- X00582 (38)
- X00583 (38)
- X00584 (38)
- X00585 (38)
- X00586 (38)
- X00591 (38)
- X00592 (38)
- X00593 (38)
- X00594 (38)
- X00596 (38)
- X00597 (38)
- X00599 (38)
Hand Of Tool
Hand Of Tool
- L (70)
- N (12)
- R (73)
Wiper Insert
Wiper Insert
- N (277)
- Y (118)
F Dimension
F Dimension
- 0.0 mm(15)
- 8.0 mm(1)
- 17.0 mm(12)
- 22.0 mm(17)
- 27.0 mm(21)
- 35.0 mm(12)
- 38.0 mm(18)
- 43.0 mm(57)
- 59.0 mm(2)
komu
F Dimension
F Dimension
- 0.0 in(15)
- 0.315 in(1)
- 0.669 in(12)
- 0.866 in(17)
- 1.063 in(21)
- 1.379 in(12)
- 1.496 in(18)
- 1.693 in(57)
- 2.323 in(2)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(4)
- -1.0 mm(7)
- 32.0 mm(12)
- 40.0 mm(17)
- 41.301 mm(2)
- 47.6 mm(2)
- 50.0 mm(16)
- 57.2 mm(2)
- 63.0 mm(12)
- 80.0 mm(40)
- 86.0 mm(74)
- 88.9 mm(2)
- 90.0 mm(2)
- 100.0 mm(17)
- 118.0 mm(2)
- 139.701 mm(2)
- 174.601 mm(2)
- 209.601 mm(2)
- 222.3 mm(2)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(4)
- -0.039 in(7)
- 1.26 in(12)
- 1.575 in(17)
- 1.627 in(2)
- 1.874 in(2)
- 1.969 in(16)
- 2.253 in(2)
- 2.48 in(12)
- 3.15 in(40)
- 3.386 in(74)
- 3.5 in(2)
- 3.543 in(2)
- 3.938 in(17)
- 4.646 in(2)
- 5.5 in(2)
- 6.875 in(2)
- 8.252 in(2)
- 8.752 in(2)
komu
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(11)
- 393.661 in(11)
komu
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(11)
- 9999.0 mm(11)
komu
Cutting Direction
Cutting Direction
- B (34)
- E (40)
- S (81)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (123)
- NEGATIVE-ZERO (17)
- NEUTRAL (ZERO) (15)
Maximum Bore Depth
Maximum Bore Depth
- 1.986 in(2)
- 2.362 in(127)
- 2.444 in(3)
- 3.037 in(4)
- 3.473 in(8)
- 3.485 in(2)
- 4.11 in(4)
- 4.412 in(12)
- 4.418 in(2)
- 4.464 in(1)
- 4.529 in(8)
- 4.612 in(10)
- 4.621 in(1)
- 5.883 in(8)
komu
Maximum Bore Depth
Maximum Bore Depth
- 50.45 mm(2)
- 60.0 mm(127)
- 62.075 mm(3)
- 77.15 mm(4)
- 88.226 mm(8)
- 88.525 mm(2)
- 104.4 mm(4)
- 112.075 mm(12)
- 112.226 mm(2)
- 113.375 mm(1)
- 115.0 mm(8)
- 117.15 mm(10)
- 117.375 mm(1)
- 149.4 mm(8)
komu
Boring Bar Material
Boring Bar Material
- S (63)
frontEnd
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (21)
- CARTRIDGE MOUNT (22)
- COMBI SHELL ADAPTER (3)
- CUTOFF SUPPORT BLADE (6)
- END MILL ADAPTER (13)
- ER COLLET CHUCK (7)
- EXTENSION (2)
- HYDRAULIC CHUCK (16)
- HYDRAULIC CHUCK-HIGH TORQUE (2)
- HYDRAULIC CHUCK-SLIM LINE (8)
- KM MODULAR ADAPTER (6)
- KM MODULAR ADAPTER-4 UNITS (1)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (4)
- SCREW-ON ADAPTER (14)
- SHELL MILL ADAPTER (11)
- SHRINK FIT ADAPTER (15)
- SQUARE SHANK ADAPTER (8)
- WHISTLE NOTCH ADAPTER (3)
Clamp Style
Clamp Style
- C (16)
- D (32)
- M (107)
- N (19)
- P (92)
- S (16)
Cutting Width
Cutting Width
- 0.039 in(6)
- 0.047 in(6)
- 0.06 in(6)
- 0.062 in(6)
- 0.069 in(6)
- 0.073 in(6)
- 0.078 in(6)
- 0.079 in(6)
- 0.088 in(6)
- 0.089 in(3)
- 0.094 in(3)
- 0.095 in(6)
- 0.097 in(6)
- 0.098 in(6)
- 0.105 in(6)
- 0.108 in(6)
- 0.11 in(6)
- 0.119 in(10)
- 0.122 in(6)
- 0.125 in(10)
- 0.126 in(10)
- 0.128 in(6)
- 0.131 in(3)
- 0.138 in(10)
- 0.143 in(6)
- 0.156 in(6)
- 0.157 in(10)
- 0.167 in(10)
- 0.169 in(6)
- 0.177 in(10)
- 0.178 in(6)
- 0.185 in(8)
- 0.188 in(10)
- 0.189 in(10)
- 0.192 in(3)
- 0.193 in(3)
- 0.195 in(6)
- 0.196 in(6)
- 0.197 in(5)
- 0.202 in(4)
- 0.213 in(4)
- 0.217 in(4)
- 0.219 in(4)
- 0.237 in(5)
- 0.25 in(5)
- 0.256 in(4)
- 0.276 in(1)
- 0.281 in(1)
- 0.312 in(1)
- 0.315 in(1)
- 0.345 in(1)
- 0.354 in(1)
- 0.375 in(1)
- 0.381 in(1)
komu
Cutting Width
Cutting Width
- 1.0 mm(6)
- 1.201 mm(6)
- 1.5 mm(6)
- 1.576 mm(6)
- 1.75 mm(6)
- 1.826 mm(6)
- 1.975 mm(6)
- 2.0 mm(6)
- 2.2 mm(6)
- 2.225 mm(6)
- 2.25 mm(3)
- 2.375 mm(3)
- 2.401 mm(6)
- 2.475 mm(6)
- 2.5 mm(6)
- 2.676 mm(6)
- 2.75 mm(6)
- 2.801 mm(6)
- 3.0 mm(10)
- 3.1 mm(6)
- 3.176 mm(10)
- 3.2 mm(10)
- 3.25 mm(6)
- 3.325 mm(3)
- 3.5 mm(10)
- 3.6 mm(6)
- 3.95 mm(6)
- 3.975 mm(3)
- 4.0 mm(10)
- 4.25 mm(10)
- 4.3 mm(6)
- 4.5 mm(10)
- 4.525 mm(6)
- 4.7 mm(8)
- 4.775 mm(10)
- 4.801 mm(10)
- 4.875 mm(3)
- 4.9 mm(3)
- 4.95 mm(6)
- 4.976 mm(6)
- 5.0 mm(5)
- 5.125 mm(4)
- 5.4 mm(4)
- 5.5 mm(4)
- 5.575 mm(4)
- 6.0 mm(5)
- 6.351 mm(5)
- 6.5 mm(4)
- 7.0 mm(1)
- 7.125 mm(1)
- 7.926 mm(1)
- 8.0 mm(1)
- 8.75 mm(1)
- 9.0 mm(1)
- 9.525 mm(1)
- 9.675 mm(1)
komu
Front End Type
Front End Type
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (14)
- KMS - KM TBD System (1)
- KMT - KM Adapter (12)
- MCS - Modular Cartridge System (22)
- PMK - Prismatic Adapter Kenna (6)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (7)
- VKT - Square Shank (8)
- ZYL - Cylindrical Adapter (85)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (73)
- D-DIAMOND/RHOMBIC 55 (74)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- R-ROUND (5)
- S-SQUARE 90 (49)
- T-TRIANGLE 60 (22)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (19)
- W-TRIGON 80 (17)
Front End Style
Front End Style
- BKA01 Intchg Heads (H) Pilot (7)
- FDA12 Transv Drive&CutRetScr (7)
- FDA13 Long&TranDrv&CutRetScr (3)
- FDA22 Transv Drive & SHCS (3)
- FDA42TranDrvw/CtrScrwORBoltCir (1)
- KMS-01 Std KM-TBD NotOnCntr (1)
- KMT00 All KM, except 02,05,09 (12)
- MCS01 Modular Deep Grooving (22)
- PMK02 Cutoff Sup Bld A1-A3 (6)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (7)
- VKT01 Std Design (8)
- ZYL01 Straight Shank (41)
- ZYL03 Attachment Thread (14)
- ZYL10 Weldon Shank (13)
- ZYL13 2Deg-Whistle Notch (3)
- ZYL22 Boring Bar Shank (14)
Insert Size
Insert Size
- 3 (6)
- 4 (4)
- 5 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.21 in(4)
- 0.294 in(2)
- 1.299 in(1)
komu
Maximum Cutting Depth
Maximum Cutting Depth
- 5.325 mm(4)
- 7.476 mm(2)
- 33.0 mm(1)
komu
Gage Length
Gage Length
- 3 in(1)
- 4 in(1)
- 0.906 in(2)
- 0.984 in(2)
- 1.024 in(1)
- 1.102 in(1)
- 1.26 in(5)
- 1.379 in(2)
- 1.389 in(2)
- 1.575 in(3)
- 1.772 in(2)
- 1.969 in(2)
- 2.106 in(4)
- 2.165 in(4)
- 2.177 in(2)
- 2.303 in(6)
- 2.323 in(4)
- 2.362 in(8)
- 2.5 in(8)
- 2.559 in(6)
- 2.618 in(4)
- 2.757 in(7)
- 2.953 in(3)
- 3.098 in(1)
- 3.15 in(14)
- 3.25 in(2)
- 3.307 in(3)
- 3.346 in(3)
- 3.375 in(1)
- 3.543 in(5)
- 3.74 in(5)
- 3.75 in(1)
- 3.938 in(7)
- 4.134 in(2)
- 4.291 in(5)
- 4.488 in(2)
- 4.529 in(1)
- 4.724 in(6)
- 5.276 in(2)
- 5.287 in(1)
- 5.297 in(2)
- 5.787 in(1)
- 6.299 in(3)
- 6.694 in(5)
- 8.162 in(1)
- 9.234 in(1)
- 11.161 in(1)
- 12.233 in(1)
- 13.161 in(1)
- 14.162 in(1)
- 14.233 in(1)
- 15.161 in(1)
- 15.233 in(1)
- 16.233 in(1)
- 19.162 in(1)
- 20.233 in(1)
Gage Length
Gage Length
- 80 mm(14)
- 60 mm(8)
- 100 mm(7)
- 70 mm(7)
- 120 mm(6)
- 65 mm(6)
- 109 mm(5)
- 170 mm(5)
- 32 mm(5)
- 90 mm(5)
- 95 mm(5)
- 55 mm(4)
- 59 mm(4)
- 160 mm(3)
- 40 mm(3)
- 75 mm(3)
- 84 mm(3)
- 85 mm(3)
- 105 mm(2)
- 114 mm(2)
- 134 mm(2)
- 23 mm(2)
- 25 mm(2)
- 35 mm(2)
- 45 mm(2)
- 50 mm(2)
- 115 mm(1)
- 147 mm(1)
- 26 mm(1)
- 28 mm(1)
- 35.25 mm(2)
- 53.5 mm(4)
- 55.301 mm(2)
- 58.5 mm(6)
- 63.5 mm(8)
- 66.5 mm(4)
- 76.2 mm(1)
- 78.7 mm(1)
- 82.551 mm(2)
- 85.726 mm(1)
- 95.25 mm(1)
- 101.601 mm(1)
- 134.3 mm(1)
- 134.55 mm(2)
- 207.326 mm(1)
- 234.55 mm(1)
- 283.5 mm(1)
- 310.701 mm(1)
- 334.3 mm(1)
- 359.725 mm(1)
- 361.526 mm(1)
- 385.1 mm(1)
- 386.925 mm(1)
- 412.326 mm(1)
- 486.725 mm(1)
- 513.926 mm(1)
Front End Size
Front End Size
- 0.237 in(3)
- 0.25 in(1)
- 0.315 in(3)
- 0.375 in(3)
- 0.394 in(4)
- 0.473 in(5)
- 0.5 in(5)
- 0.551 in(3)
- 0.625 in(3)
- 0.63 in(5)
- 0.709 in(3)
- 0.75 in(6)
- 0.787 in(6)
- 0.866 in(1)
- 0.875 in(1)
- 0.984 in(5)
- 1.0 in(6)
- 1.063 in(2)
- 1.22 in(1)
- 1.25 in(5)
- 1.26 in(9)
- 1.5 in(4)
- 1.575 in(11)
- 1.75 in(1)
- 1.891 in(1)
- 1.969 in(2)
- 2.0 in(3)
- 2.48 in(2)
- 2.5 in(2)
komu
Front End Size
Front End Size
- 6.0 mm(3)
- 6.351 mm(1)
- 8.0 mm(3)
- 9.525 mm(3)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.701 mm(5)
- 14.0 mm(3)
- 15.875 mm(3)
- 16.0 mm(5)
- 18.0 mm(3)
- 19.05 mm(6)
- 20.0 mm(6)
- 22.0 mm(1)
- 22.225 mm(1)
- 25.0 mm(5)
- 25.401 mm(6)
- 27.0 mm(2)
- 31.0 mm(1)
- 31.75 mm(5)
- 32.0 mm(9)
- 38.1 mm(4)
- 40.0 mm(11)
- 44.45 mm(1)
- 48.0 mm(1)
- 50.0 mm(2)
- 50.801 mm(3)
- 63.0 mm(2)
- 63.5 mm(2)
komu
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (203)
- B L (184)
- C A (224)
- C N (237)
- D P (158)
- H T (199)
- H W (272)
backEnd
Connection Type
Connection Type
- TAPER SHANK (155)
System Size
System Size
- KM40TS (2)
- KM50TS (4)
- KM63TS (300)
- KM63UT (1)
- KM63XMZ (4)
- KM80ATC (4)
- KM80TS (4)
Back-End Diameter
Back-End Diameter
- 40.0 mm(2)
- 50.0 mm(4)
- 63.0 mm(432)
- 80.0 mm(8)
komu
Back-End Diameter
Back-End Diameter
- 1.575 in(2)
- 1.969 in(4)
- 2.48 in(432)
- 3.15 in(8)
komu
No filters matching ""