Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Tvarové soustružení

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1924)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1924)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1924)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1924)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1924)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1924)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1924)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1924)
    • M Stainless Steel (1814)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1814)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1814)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1814)
    • K Cast Iron (1705)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1705)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1701)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1696)
    • N Non-Ferrous Materials (1668)
      • N1
        Wrought Aluminum (1638)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1578)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(369)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1668)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1592)
      • N6
        Carbon, Graphite Composites, CFRP (1563)
      • N7
        MMC's (333)
    • S High-Temp Alloys (1835)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1835)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1835)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1835)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1812)
    • H Hardened Materials (1184)
      • H1
        Hardened Materials 44-48 HRC(1184)
      • H2
        Hardened Materials 48-55 HRC(1103)
      • H3
        Hardened Materials 56-60 HRC(364)
      • H4
        Hardened Materials >60 HRC(364)
    • C CFRP Materials (230)
      • C1
        CFRP, CFRP / CFRP (215)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (143)
    Vybrat první volbu
    • BR (23)
    • CN (190)
    • DE (190)
    • GB (108)
    • IN (33)
    • SG (67)
    • US (278)
    Applications
    Applications
    • Back BoringBack Boring (205)
    • BoringBoring (303)
    • CRT ProfilingCRT Profiling (20)
    • Chamfer TurningChamfer Turning (69)
    • Cut-OffCut-Off (353)
    • Deep GroovingDeep Grooving (123)
    • Face GroovingFace Grooving (1023)
    • FacingFacing (282)
    • GroovingGrooving (1260)
    • ID FacingID Facing (218)
    • ID GroovingID Grooving (701)
    • ID Thread TurningID Thread Turning (69)
    • Multiple Direction CuttingMultiple Direction Cutting (578)
    • OD Thread TurningOD Thread Turning (127)
    • Plunge TurningPlunge Turning (530)
    • ProfilingProfiling (542)
    • TRN BoringTRN Boring (50)
    • ThreadingThreading (130)
    • TurningTurning (452)
    Type of Thread
    Type of Thread
    • 60 (187)
    • ACME (122)
    • API (114)
    • API RD (86)
    • BSW (78)
    • BUTTRESS (182)
    • M (114)
    • NPT (78)
    • STUB ACME (78)
    • UN (182)
    • UNJ (78)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1259)
    • Lightly Interrupted Cut (1486)
    • Smooth Cut (1675)
    • Varying Depth of Cut (1556)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (12)
    • 60.0 (4)
    • 62.5 (2)
    • 72.5 (2)
    • 90.0 (831)
    • 92.25 (27)
    • 93.0 (1)
    • 95.0 (77)
    • 100.0 (1)
    • 107.5 (9)
    • 117.5 (8)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (8)
    • Boring Bar Shank (212)
    • Toolholder (486)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (871)
    • 2.0 (1369)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.75 in(2)
    • 1.625 in(6)
    • 1.881 in(10)
    • 1.954 in(4)
    • 2.037 in(8)
    • 2.077 in(31)
    • 2.138 in(5)
    • 2.156 in(47)
    • 2.165 in(1)
    • 2.192 in(1)
    • 2.269 in(21)
    • 2.274 in(4)
    • 2.347 in(4)
    • 2.352 in(14)
    • 2.431 in(6)
    • 2.5 in(4)
    • 2.584 in(2)
    • 2.638 in(6)
    • 2.668 in(4)
    • 2.757 in(2)
    • 2.888 in(3)
    • 3.15 in(3)
    • 3.338 in(2)
    • 3.5 in(6)
    • 3.638 in(2)
    • 3.938 in(6)
    • 4.0 in(5)
    • 4.5 in(73)
    • 4.921 in(110)
    • 4.933 in(12)
    • 5.0 in(40)
    • 5.327 in(2)
    • 5.348 in(2)
    • 5.372 in(4)
    • 5.394 in(4)
    • 5.463 in(4)
    • 5.508 in(12)
    • 5.906 in(120)
    • 5.915 in(4)
    • 5.917 in(4)
    • 5.961 in(10)
    • 6.0 in(179)
    • 6.114 in(2)
    • 6.136 in(2)
    • 6.25 in(4)
    • 6.372 in(2)
    • 6.394 in(2)
    • 6.694 in(46)
    • 6.703 in(4)
    • 7.0 in(23)
    • 7.079 in(2)
    • 7.087 in(14)
    • 7.263 in(2)
    • 7.875 in(36)
    • 7.931 in(7)
    • 7.976 in(1)
    • 8.0 in(7)
    • 8.012 in(4)
    • 8.019 in(6)
    • 8.02 in(4)
    • 8.055 in(1)
    • 8.132 in(2)
    • 8.15 in(1)
    • 9.843 in(20)
    • 9.879 in(1)
    • 10.0 in(15)
    • 10.02 in(3)
    • 10.025 in(1)
    • 10.063 in(2)
    • 10.095 in(2)
    • 11.811 in(12)
    • 12.0 in(14)
    • 12.02 in(3)
    • 12.025 in(2)
    • 13.781 in(2)
    • 14.0 in(12)
    • 14.07 in(1)
    • 16.0 in(10)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 19.05 mm(2)
    • 41.276 mm(6)
    • 47.75 mm(10)
    • 49.625 mm(4)
    • 51.75 mm(8)
    • 52.75 mm(31)
    • 54.301 mm(5)
    • 54.75 mm(47)
    • 55.0 mm(1)
    • 55.676 mm(1)
    • 57.625 mm(21)
    • 57.75 mm(4)
    • 59.625 mm(4)
    • 59.75 mm(14)
    • 61.75 mm(6)
    • 63.5 mm(4)
    • 65.625 mm(2)
    • 67.0 mm(6)
    • 67.75 mm(4)
    • 70.0 mm(2)
    • 73.351 mm(3)
    • 80.0 mm(3)
    • 84.775 mm(2)
    • 88.9 mm(6)
    • 92.4 mm(2)
    • 100.0 mm(6)
    • 101.601 mm(5)
    • 114.301 mm(73)
    • 125.0 mm(110)
    • 125.301 mm(12)
    • 127.0 mm(40)
    • 135.3 mm(2)
    • 135.85 mm(2)
    • 136.451 mm(4)
    • 137.0 mm(4)
    • 138.75 mm(4)
    • 139.9 mm(12)
    • 150.0 mm(120)
    • 150.25 mm(4)
    • 150.3 mm(4)
    • 151.4 mm(10)
    • 152.4 mm(179)
    • 155.3 mm(2)
    • 155.851 mm(2)
    • 158.75 mm(4)
    • 161.851 mm(2)
    • 162.4 mm(2)
    • 170.0 mm(46)
    • 170.25 mm(4)
    • 177.8 mm(23)
    • 179.8 mm(2)
    • 180.0 mm(14)
    • 184.451 mm(2)
    • 200.0 mm(36)
    • 201.451 mm(7)
    • 202.601 mm(1)
    • 203.201 mm(7)
    • 203.5 mm(4)
    • 203.675 mm(6)
    • 203.701 mm(4)
    • 204.601 mm(1)
    • 206.55 mm(2)
    • 207.0 mm(1)
    • 250.0 mm(20)
    • 250.925 mm(1)
    • 254.0 mm(15)
    • 254.5 mm(3)
    • 254.601 mm(1)
    • 255.601 mm(2)
    • 256.401 mm(2)
    • 300.0 mm(12)
    • 304.8 mm(14)
    • 305.3 mm(3)
    • 305.401 mm(2)
    • 350.0 mm(2)
    • 355.6 mm(12)
    • 357.375 mm(1)
    • 406.401 mm(10)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(78)
    • 0.003 in(187)
    • 0.004 in(146)
    • 0.005 in(161)
    • 0.006 in(123)
    • 0.007 in(150)
    • 0.008 in(710)
    • 0.01 in(150)
    • 0.011 in(78)
    • 0.012 in(144)
    • 0.014 in(117)
    • 0.016 in(768)
    • 0.019 in(114)
    • 0.02 in(242)
    • 0.023 in(117)
    • 0.03 in(70)
    • 0.031 in(748)
    • 0.033 in(11)
    • 0.034 in(62)
    • 0.035 in(114)
    • 0.039 in(372)
    • 0.041 in(141)
    • 0.046 in(20)
    • 0.047 in(402)
    • 0.048 in(18)
    • 0.049 in(147)
    • 0.06 in(312)
    • 0.061 in(53)
    • 0.062 in(94)
    • 0.063 in(429)
    • 0.065 in(50)
    • 0.069 in(147)
    • 0.078 in(93)
    • 0.079 in(237)
    • 0.08 in(72)
    • 0.081 in(55)
    • 0.089 in(114)
    • 0.094 in(146)
    • 0.095 in(163)
    • 0.096 in(53)
    • 0.098 in(137)
    • 0.099 in(61)
    • 0.1 in(45)
    • 0.119 in(103)
    • 0.12 in(109)
    • 0.125 in(211)
    • 0.128 in(41)
    • 0.156 in(50)
    • 0.157 in(50)
    • 0.158 in(56)
    • 0.159 in(33)
    • 0.187 in(8)
    • 0.188 in(38)
    • 0.197 in(12)
    • 0.198 in(15)
    • 0.25 in(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(78)
    • 0.076 mm(187)
    • 0.1 mm(146)
    • 0.125 mm(161)
    • 0.151 mm(123)
    • 0.176 mm(150)
    • 0.2 mm(710)
    • 0.225 mm(78)
    • 0.25 mm(150)
    • 0.275 mm(78)
    • 0.301 mm(144)
    • 0.325 mm(117)
    • 0.351 mm(114)
    • 0.4 mm(768)
    • 0.45 mm(114)
    • 0.476 mm(40)
    • 0.5 mm(242)
    • 0.576 mm(117)
    • 0.75 mm(70)
    • 0.775 mm(213)
    • 0.8 mm(535)
    • 0.826 mm(11)
    • 0.851 mm(62)
    • 0.9 mm(114)
    • 1.0 mm(372)
    • 1.05 mm(141)
    • 1.175 mm(20)
    • 1.201 mm(402)
    • 1.225 mm(18)
    • 1.25 mm(147)
    • 1.5 mm(300)
    • 1.526 mm(90)
    • 1.55 mm(53)
    • 1.576 mm(94)
    • 1.6 mm(429)
    • 1.651 mm(50)
    • 1.75 mm(147)
    • 1.975 mm(93)
    • 2.0 mm(237)
    • 2.025 mm(72)
    • 2.051 mm(55)
    • 2.25 mm(114)
    • 2.375 mm(146)
    • 2.401 mm(163)
    • 2.45 mm(53)
    • 2.5 mm(137)
    • 2.526 mm(61)
    • 2.551 mm(45)
    • 3.0 mm(103)
    • 3.026 mm(62)
    • 3.051 mm(47)
    • 3.176 mm(211)
    • 3.25 mm(41)
    • 3.95 mm(30)
    • 3.975 mm(20)
    • 4.0 mm(50)
    • 4.025 mm(56)
    • 4.05 mm(33)
    • 4.75 mm(8)
    • 4.775 mm(38)
    • 5.0 mm(12)
    • 5.025 mm(15)
    • 6.351 mm(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(1276)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(1276)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00326 (29)
    • K1 (5)
    • K1025 (132)
    • K2885 (146)
    • K313 (947)
    • K420 (262)
    • K4H (110)
    • K6 (4)
    • K68 (341)
    • K8735 (29)
    • KB1345 (139)
    • KB1630 (359)
    • KB5625 (319)
    • KBH20 (281)
    • KC250 (233)
    • KC5010 (790)
    • KC5025 (751)
    • KC5410 (328)
    • KC5510 (20)
    • KC710 (182)
    • KC720 (216)
    • KC722 (182)
    • KC730 (414)
    • KC7310 (139)
    • KC732 (224)
    • KC8050 (152)
    • KC810 (298)
    • KC850 (353)
    • KC9025 (94)
    • KC910 (251)
    • KC9105 (62)
    • KC9110 (635)
    • KC9120 (112)
    • KC9125 (440)
    • KC9225 (152)
    • KC9315 (89)
    • KC9320 (182)
    • KC935 (328)
    • KC950 (276)
    • KCD25 (29)
    • KCK05 (37)
    • KCK15B (31)
    • KCK20 (415)
    • KCK20B (433)
    • KCM15B (59)
    • KCM25 (100)
    • KCM25B (5)
    • KCM35B (166)
    • KCP05 (93)
    • KCP10 (451)
    • KCP10B (530)
    • KCP25 (452)
    • KCP25B (582)
    • KCP25C (132)
    • KCS10 (56)
    • KCS10B (255)
    • KCU10 (1107)
    • KCU10B (1094)
    • KCU25 (1072)
    • KCU25B (1001)
    • KD050 (122)
    • KD081 (107)
    • KD100 (191)
    • KD120 (200)
    • KD1405 (190)
    • KD1425 (179)
    • KMS (127)
    • KS15 (29)
    • KT125 (82)
    • KT150 (87)
    • KT175 (199)
    • KT315 (646)
    • KU10 (339)
    • KU10T (182)
    • KU25T (182)
    • KU30T (423)
    • KY3000 (114)
    • KY3500 (272)
    • KYS30 (121)
    • SP88F8 (52)
    Hand Of Tool
    Hand Of Tool
    • L (333)
    • N (14)
    • R (411)
    Wiper Insert
    Wiper Insert
    • N (1893)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 8.175 mm(1)
    • 8.225 mm(2)
    • 8.525 mm(4)
    • 8.875 mm(2)
    • 9.0 mm(6)
    • 9.4 mm(2)
    • 9.525 mm(6)
    • 9.75 mm(1)
    • 10.0 mm(1)
    • 10.226 mm(1)
    • 10.25 mm(1)
    • 10.3 mm(1)
    • 10.775 mm(1)
    • 10.875 mm(1)
    • 10.976 mm(2)
    • 11.0 mm(11)
    • 11.05 mm(7)
    • 11.101 mm(2)
    • 12.0 mm(1)
    • 12.101 mm(2)
    • 12.175 mm(2)
    • 12.226 mm(1)
    • 12.5 mm(1)
    • 12.576 mm(6)
    • 12.625 mm(1)
    • 12.701 mm(9)
    • 12.726 mm(3)
    • 12.75 mm(2)
    • 12.8 mm(4)
    • 12.851 mm(2)
    • 12.9 mm(2)
    • 13.0 mm(17)
    • 13.025 mm(2)
    • 13.951 mm(2)
    • 13.976 mm(4)
    • 14.0 mm(2)
    • 14.15 mm(2)
    • 14.275 mm(10)
    • 15.875 mm(6)
    • 15.925 mm(1)
    • 15.976 mm(4)
    • 16.0 mm(7)
    • 16.026 mm(1)
    • 16.1 mm(1)
    • 16.2 mm(5)
    • 16.225 mm(2)
    • 16.25 mm(2)
    • 16.875 mm(5)
    • 17.0 mm(15)
    • 17.3 mm(6)
    • 17.35 mm(2)
    • 17.475 mm(4)
    • 17.5 mm(2)
    • 18.925 mm(2)
    • 19.026 mm(1)
    • 19.05 mm(9)
    • 19.075 mm(16)
    • 19.1 mm(1)
    • 19.125 mm(18)
    • 19.225 mm(7)
    • 19.25 mm(2)
    • 19.425 mm(2)
    • 20.0 mm(4)
    • 20.05 mm(14)
    • 20.1 mm(28)
    • 20.201 mm(26)
    • 20.3 mm(2)
    • 21.125 mm(4)
    • 21.776 mm(1)
    • 21.8 mm(1)
    • 22.0 mm(14)
    • 22.225 mm(3)
    • 22.6 mm(2)
    • 25.0 mm(14)
    • 25.05 mm(12)
    • 25.1 mm(20)
    • 25.201 mm(14)
    • 25.3 mm(2)
    • 25.326 mm(2)
    • 25.35 mm(2)
    • 25.401 mm(21)
    • 25.425 mm(12)
    • 25.475 mm(21)
    • 25.5 mm(4)
    • 25.576 mm(8)
    • 25.701 mm(5)
    • 25.776 mm(1)
    • 25.8 mm(2)
    • 25.875 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(2)
    • 26.225 mm(2)
    • 27.0 mm(5)
    • 27.901 mm(1)
    • 28.451 mm(1)
    • 28.576 mm(3)
    • 29.875 mm(3)
    • 30.0 mm(8)
    • 30.401 mm(1)
    • 30.8 mm(1)
    • 31.75 mm(32)
    • 31.826 mm(10)
    • 31.925 mm(4)
    • 32.0 mm(25)
    • 32.051 mm(4)
    • 32.075 mm(8)
    • 32.15 mm(2)
    • 32.176 mm(4)
    • 32.25 mm(2)
    • 32.301 mm(4)
    • 32.4 mm(2)
    • 32.525 mm(2)
    • 32.575 mm(2)
    • 32.65 mm(2)
    • 33.1 mm(1)
    • 34.875 mm(1)
    • 34.926 mm(4)
    • 35.0 mm(2)
    • 35.1 mm(1)
    • 35.4 mm(1)
    • 38.1 mm(19)
    • 38.176 mm(2)
    • 38.275 mm(2)
    • 38.401 mm(2)
    • 38.5 mm(2)
    • 38.6 mm(2)
    • 38.75 mm(2)
    • 38.901 mm(1)
    • 38.926 mm(2)
    • 39.1 mm(2)
    • 40.0 mm(4)
    • 40.176 mm(2)
    • 40.301 mm(2)
    • 40.651 mm(2)
    • 41.276 mm(5)
    • 44.45 mm(2)
    • 47.625 mm(2)
    • 50.801 mm(7)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.322 in(1)
    • 0.324 in(2)
    • 0.336 in(4)
    • 0.35 in(2)
    • 0.354 in(6)
    • 0.37 in(2)
    • 0.375 in(6)
    • 0.384 in(1)
    • 0.394 in(1)
    • 0.403 in(1)
    • 0.404 in(1)
    • 0.406 in(1)
    • 0.424 in(1)
    • 0.428 in(1)
    • 0.432 in(2)
    • 0.433 in(11)
    • 0.435 in(7)
    • 0.437 in(2)
    • 0.473 in(1)
    • 0.477 in(2)
    • 0.48 in(2)
    • 0.481 in(1)
    • 0.492 in(1)
    • 0.495 in(6)
    • 0.497 in(1)
    • 0.5 in(9)
    • 0.501 in(3)
    • 0.502 in(2)
    • 0.504 in(4)
    • 0.506 in(2)
    • 0.508 in(2)
    • 0.512 in(17)
    • 0.513 in(2)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.551 in(2)
    • 0.557 in(2)
    • 0.562 in(10)
    • 0.625 in(6)
    • 0.627 in(1)
    • 0.629 in(4)
    • 0.63 in(7)
    • 0.631 in(1)
    • 0.634 in(1)
    • 0.638 in(5)
    • 0.639 in(2)
    • 0.64 in(2)
    • 0.664 in(5)
    • 0.669 in(15)
    • 0.681 in(6)
    • 0.683 in(2)
    • 0.689 in(4)
    • 0.69 in(2)
    • 0.745 in(2)
    • 0.749 in(1)
    • 0.75 in(9)
    • 0.751 in(16)
    • 0.752 in(1)
    • 0.753 in(18)
    • 0.757 in(7)
    • 0.758 in(2)
    • 0.765 in(2)
    • 0.787 in(4)
    • 0.789 in(14)
    • 0.791 in(28)
    • 0.795 in(26)
    • 0.799 in(2)
    • 0.833 in(4)
    • 0.857 in(1)
    • 0.858 in(1)
    • 0.866 in(14)
    • 0.875 in(3)
    • 0.89 in(2)
    • 0.984 in(14)
    • 0.986 in(12)
    • 0.988 in(20)
    • 0.992 in(14)
    • 0.996 in(2)
    • 0.997 in(2)
    • 0.998 in(2)
    • 1.0 in(21)
    • 1.002 in(12)
    • 1.004 in(25)
    • 1.008 in(8)
    • 1.012 in(5)
    • 1.016 in(3)
    • 1.02 in(3)
    • 1.024 in(2)
    • 1.032 in(2)
    • 1.063 in(5)
    • 1.098 in(1)
    • 1.12 in(1)
    • 1.125 in(3)
    • 1.176 in(3)
    • 1.181 in(8)
    • 1.197 in(1)
    • 1.213 in(1)
    • 1.25 in(32)
    • 1.254 in(10)
    • 1.258 in(4)
    • 1.26 in(25)
    • 1.262 in(4)
    • 1.264 in(8)
    • 1.266 in(2)
    • 1.268 in(4)
    • 1.27 in(2)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.281 in(2)
    • 1.282 in(2)
    • 1.285 in(2)
    • 1.303 in(1)
    • 1.373 in(1)
    • 1.375 in(4)
    • 1.379 in(2)
    • 1.383 in(1)
    • 1.395 in(1)
    • 1.5 in(19)
    • 1.504 in(2)
    • 1.508 in(2)
    • 1.512 in(2)
    • 1.516 in(2)
    • 1.52 in(2)
    • 1.526 in(2)
    • 1.532 in(1)
    • 1.534 in(2)
    • 1.539 in(2)
    • 1.575 in(4)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.6 in(2)
    • 1.625 in(5)
    • 1.75 in(2)
    • 1.875 in(2)
    • 2.0 in(7)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(88)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(12)
    • 16.776 mm(2)
    • 17.0 mm(3)
    • 17.026 mm(2)
    • 18.5 mm(2)
    • 18.55 mm(4)
    • 19.05 mm(1)
    • 20.0 mm(21)
    • 20.326 mm(1)
    • 21.0 mm(3)
    • 22.0 mm(3)
    • 22.85 mm(4)
    • 24.901 mm(6)
    • 25.0 mm(33)
    • 25.401 mm(6)
    • 26.0 mm(7)
    • 26.925 mm(1)
    • 28.576 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(20)
    • 33.025 mm(5)
    • 34.0 mm(4)
    • 34.926 mm(6)
    • 36.0 mm(5)
    • 38.0 mm(1)
    • 38.1 mm(8)
    • 40.0 mm(14)
    • 41.301 mm(39)
    • 42.0 mm(5)
    • 44.0 mm(6)
    • 44.45 mm(2)
    • 45.051 mm(1)
    • 46.475 mm(1)
    • 47.6 mm(39)
    • 48.0 mm(3)
    • 50.0 mm(6)
    • 50.801 mm(4)
    • 52.0 mm(14)
    • 53.85 mm(1)
    • 54.0 mm(4)
    • 55.875 mm(3)
    • 56.625 mm(29)
    • 57.151 mm(6)
    • 57.2 mm(15)
    • 58.0 mm(4)
    • 60.0 mm(4)
    • 60.325 mm(4)
    • 63.0 mm(1)
    • 63.5 mm(22)
    • 64.0 mm(4)
    • 65.0 mm(1)
    • 68.0 mm(4)
    • 69.851 mm(4)
    • 70.0 mm(8)
    • 76.2 mm(8)
    • 80.0 mm(7)
    • 82.551 mm(4)
    • 88.9 mm(117)
    • 90.0 mm(8)
    • 92.0 mm(3)
    • 100.0 mm(4)
    • 120.0 mm(13)
    • 127.0 mm(1)
    • 130.0 mm(4)
    • 132.0 mm(4)
    • 139.701 mm(232)
    • 146.05 mm(3)
    • 174.601 mm(39)
    • 184.0 mm(3)
    • 200.0 mm(8)
    • 209.601 mm(103)
    • 222.3 mm(15)
    • 250.0 mm(6)
    • 290.0 mm(8)
    • 333.0 mm(3)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(88)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.625 in(4)
    • 0.63 in(12)
    • 0.66 in(2)
    • 0.669 in(3)
    • 0.67 in(2)
    • 0.728 in(2)
    • 0.73 in(4)
    • 0.75 in(1)
    • 0.787 in(21)
    • 0.8 in(1)
    • 0.828 in(3)
    • 0.866 in(3)
    • 0.9 in(4)
    • 0.98 in(6)
    • 0.984 in(33)
    • 1.0 in(6)
    • 1.024 in(7)
    • 1.06 in(1)
    • 1.125 in(4)
    • 1.25 in(6)
    • 1.26 in(20)
    • 1.3 in(5)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.417 in(5)
    • 1.496 in(1)
    • 1.5 in(8)
    • 1.575 in(14)
    • 1.627 in(39)
    • 1.655 in(5)
    • 1.732 in(6)
    • 1.75 in(2)
    • 1.774 in(1)
    • 1.83 in(1)
    • 1.874 in(39)
    • 1.891 in(3)
    • 1.969 in(6)
    • 2.0 in(4)
    • 2.047 in(14)
    • 2.12 in(1)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(29)
    • 2.25 in(6)
    • 2.253 in(15)
    • 2.283 in(4)
    • 2.362 in(4)
    • 2.375 in(4)
    • 2.48 in(1)
    • 2.5 in(22)
    • 2.52 in(4)
    • 2.559 in(1)
    • 2.677 in(4)
    • 2.75 in(4)
    • 2.757 in(8)
    • 3.0 in(8)
    • 3.15 in(7)
    • 3.25 in(4)
    • 3.5 in(117)
    • 3.543 in(8)
    • 3.622 in(3)
    • 3.938 in(4)
    • 4.724 in(13)
    • 5.0 in(1)
    • 5.118 in(4)
    • 5.197 in(4)
    • 5.5 in(232)
    • 5.75 in(3)
    • 6.875 in(39)
    • 7.244 in(3)
    • 7.875 in(8)
    • 8.252 in(103)
    • 8.752 in(15)
    • 9.843 in(6)
    • 11.417 in(8)
    • 13.11 in(3)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(4)
    • 0.828 in(3)
    • 0.906 in(1)
    • 0.984 in(6)
    • 1.024 in(2)
    • 1.063 in(9)
    • 1.102 in(7)
    • 1.339 in(7)
    • 1.379 in(2)
    • 1.417 in(13)
    • 1.811 in(1)
    • 1.891 in(4)
    • 2.126 in(2)
    • 2.283 in(4)
    • 2.52 in(3)
    • 2.835 in(3)
    • 2.914 in(3)
    • 3.307 in(4)
    • 3.701 in(4)
    • 3.938 in(8)
    • 4.409 in(4)
    • 4.882 in(3)
    • 5.354 in(4)
    • 5.906 in(3)
    • 6.299 in(4)
    • 7.875 in(2)
    • 8.346 in(4)
    • 10.0 in(4)
    • 11.811 in(12)
    • 39.331 in(11)
    • 393.661 in(519)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(4)
    • 21.0 mm(3)
    • 23.0 mm(1)
    • 25.0 mm(6)
    • 26.0 mm(2)
    • 27.0 mm(9)
    • 28.0 mm(7)
    • 34.0 mm(7)
    • 35.0 mm(2)
    • 36.0 mm(13)
    • 46.0 mm(1)
    • 48.0 mm(4)
    • 54.0 mm(2)
    • 58.0 mm(4)
    • 64.0 mm(3)
    • 72.0 mm(3)
    • 74.0 mm(3)
    • 84.0 mm(4)
    • 94.0 mm(4)
    • 100.0 mm(8)
    • 112.0 mm(4)
    • 124.0 mm(3)
    • 136.0 mm(4)
    • 150.0 mm(3)
    • 160.0 mm(4)
    • 200.0 mm(2)
    • 212.0 mm(4)
    • 254.0 mm(4)
    • 300.0 mm(12)
    • 999.0 mm(11)
    • 9999.0 mm(519)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 17.5 (4)
    Countersunk Angle MinkomuCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • B (94)
    • E (490)
    • P (4)
    • S (170)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (7)
    • DOUBLE POSITIVE (5)
    • NEGATIVE-ZERO (90)
    • NEUTRAL (ZERO) (315)
    • POSITIVE-ZERO (186)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.946 in(4)
    • 1.0 in(14)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.25 in(6)
    • 1.26 in(4)
    • 1.291 in(1)
    • 1.5 in(7)
    • 1.575 in(15)
    • 1.586 in(2)
    • 1.587 in(2)
    • 1.891 in(4)
    • 1.969 in(9)
    • 1.98 in(8)
    • 2.0 in(34)
    • 2.496 in(2)
    • 2.499 in(1)
    • 2.5 in(6)
    • 2.511 in(1)
    • 2.52 in(19)
    • 2.835 in(2)
    • 3.0 in(13)
    • 3.15 in(17)
    • 3.75 in(4)
    • 3.781 in(2)
    • 3.938 in(11)
    • 4.0 in(13)
    • 4.5 in(4)
    • 4.992 in(1)
    • 5.0 in(4)
    • 5.039 in(6)
    • 6.0 in(9)
    • 6.299 in(5)
    • 7.0 in(3)
    • 7.875 in(2)
    • 8.0 in(8)
    • 9.0 in(1)
    • 10.0 in(7)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(4)
    • 25.401 mm(14)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 32.801 mm(1)
    • 38.1 mm(7)
    • 40.0 mm(15)
    • 40.276 mm(2)
    • 40.301 mm(2)
    • 48.0 mm(4)
    • 50.0 mm(9)
    • 50.301 mm(8)
    • 50.801 mm(34)
    • 63.401 mm(2)
    • 63.475 mm(1)
    • 63.5 mm(6)
    • 63.75 mm(1)
    • 64.0 mm(19)
    • 72.0 mm(2)
    • 76.2 mm(13)
    • 80.0 mm(17)
    • 95.25 mm(4)
    • 96.0 mm(2)
    • 100.0 mm(11)
    • 101.601 mm(13)
    • 114.301 mm(4)
    • 126.801 mm(1)
    • 127.0 mm(4)
    • 128.0 mm(6)
    • 152.4 mm(9)
    • 160.0 mm(5)
    • 177.8 mm(3)
    • 200.0 mm(2)
    • 203.201 mm(8)
    • 228.601 mm(1)
    • 254.0 mm(7)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (19)
    • S (201)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (79)
    Clamp Style
    Clamp Style
    • N (297)
    • T (53)
    • Y (599)
    Cutting Width
    Cutting Width
    • 0.02 in(68)
    • 0.031 in(73)
    • 0.035 in(68)
    • 0.039 in(153)
    • 0.041 in(68)
    • 0.047 in(151)
    • 0.055 in(68)
    • 0.058 in(68)
    • 0.06 in(157)
    • 0.062 in(218)
    • 0.063 in(14)
    • 0.067 in(68)
    • 0.069 in(146)
    • 0.073 in(78)
    • 0.077 in(68)
    • 0.078 in(78)
    • 0.079 in(304)
    • 0.084 in(158)
    • 0.088 in(146)
    • 0.089 in(106)
    • 0.094 in(99)
    • 0.095 in(248)
    • 0.097 in(79)
    • 0.098 in(200)
    • 0.104 in(1)
    • 0.105 in(78)
    • 0.108 in(146)
    • 0.11 in(78)
    • 0.119 in(336)
    • 0.12 in(79)
    • 0.122 in(156)
    • 0.123 in(154)
    • 0.125 in(411)
    • 0.126 in(182)
    • 0.128 in(146)
    • 0.129 in(68)
    • 0.13 in(128)
    • 0.131 in(40)
    • 0.138 in(183)
    • 0.143 in(78)
    • 0.147 in(36)
    • 0.15 in(32)
    • 0.151 in(36)
    • 0.152 in(68)
    • 0.156 in(93)
    • 0.157 in(237)
    • 0.161 in(104)
    • 0.162 in(129)
    • 0.167 in(114)
    • 0.169 in(78)
    • 0.177 in(114)
    • 0.178 in(78)
    • 0.185 in(95)
    • 0.187 in(121)
    • 0.188 in(200)
    • 0.189 in(119)
    • 0.192 in(93)
    • 0.193 in(102)
    • 0.195 in(78)
    • 0.196 in(78)
    • 0.197 in(140)
    • 0.199 in(49)
    • 0.201 in(49)
    • 0.202 in(143)
    • 0.213 in(36)
    • 0.217 in(36)
    • 0.218 in(8)
    • 0.219 in(36)
    • 0.237 in(142)
    • 0.239 in(52)
    • 0.241 in(109)
    • 0.25 in(187)
    • 0.255 in(41)
    • 0.256 in(88)
    • 0.276 in(37)
    • 0.281 in(45)
    • 0.289 in(36)
    • 0.312 in(59)
    • 0.313 in(20)
    • 0.315 in(52)
    • 0.317 in(46)
    • 0.319 in(18)
    • 0.32 in(61)
    • 0.345 in(3)
    • 0.354 in(3)
    • 0.375 in(29)
    • 0.38 in(8)
    • 0.381 in(3)
    • 0.382 in(8)
    • 0.384 in(8)
    • 0.394 in(20)
    • 0.396 in(8)
    • 0.399 in(23)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(68)
    • 0.775 mm(73)
    • 0.8 mm(68)
    • 0.9 mm(68)
    • 1.0 mm(153)
    • 1.05 mm(68)
    • 1.201 mm(151)
    • 1.401 mm(68)
    • 1.475 mm(68)
    • 1.5 mm(157)
    • 1.576 mm(218)
    • 1.6 mm(14)
    • 1.701 mm(68)
    • 1.75 mm(146)
    • 1.826 mm(78)
    • 1.951 mm(68)
    • 1.975 mm(78)
    • 2.0 mm(304)
    • 2.125 mm(158)
    • 2.2 mm(146)
    • 2.225 mm(146)
    • 2.25 mm(106)
    • 2.375 mm(99)
    • 2.401 mm(248)
    • 2.475 mm(79)
    • 2.5 mm(200)
    • 2.625 mm(1)
    • 2.676 mm(78)
    • 2.75 mm(146)
    • 2.801 mm(78)
    • 3.0 mm(336)
    • 3.051 mm(79)
    • 3.1 mm(156)
    • 3.125 mm(154)
    • 3.176 mm(411)
    • 3.2 mm(182)
    • 3.25 mm(146)
    • 3.276 mm(68)
    • 3.301 mm(128)
    • 3.325 mm(40)
    • 3.5 mm(183)
    • 3.6 mm(78)
    • 3.725 mm(36)
    • 3.801 mm(32)
    • 3.825 mm(36)
    • 3.85 mm(68)
    • 3.95 mm(89)
    • 3.975 mm(44)
    • 4.0 mm(237)
    • 4.101 mm(104)
    • 4.125 mm(129)
    • 4.25 mm(114)
    • 4.3 mm(78)
    • 4.5 mm(114)
    • 4.525 mm(78)
    • 4.7 mm(95)
    • 4.75 mm(121)
    • 4.775 mm(200)
    • 4.801 mm(119)
    • 4.875 mm(93)
    • 4.9 mm(102)
    • 4.95 mm(78)
    • 4.976 mm(78)
    • 5.0 mm(140)
    • 5.051 mm(49)
    • 5.101 mm(49)
    • 5.125 mm(143)
    • 5.4 mm(36)
    • 5.5 mm(36)
    • 5.525 mm(8)
    • 5.575 mm(36)
    • 6.0 mm(142)
    • 6.051 mm(52)
    • 6.125 mm(109)
    • 6.351 mm(187)
    • 6.476 mm(41)
    • 6.5 mm(88)
    • 7.0 mm(37)
    • 7.125 mm(45)
    • 7.325 mm(36)
    • 7.926 mm(59)
    • 7.95 mm(20)
    • 8.0 mm(52)
    • 8.05 mm(46)
    • 8.1 mm(18)
    • 8.125 mm(61)
    • 8.75 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(29)
    • 9.65 mm(8)
    • 9.675 mm(3)
    • 9.701 mm(8)
    • 9.75 mm(8)
    • 10.0 mm(20)
    • 10.05 mm(8)
    • 10.125 mm(23)
    Cutting Width MinkomuCutting Width Max
    Front End Type
    Front End Type
    • MCS - Modular Cartridge System (79)
    Insert Shape
    Insert Shape
    • D-DIAMOND/RHOMBIC 55 (30)
    • K-PARALLELOGRAM 55 (13)
    • N/K-PARALLELOGRAM 55 (265)
    • PRISMATIC (978)
    • R-ROUND (105)
    • TN-TOP NOTCH (524)
    • V-DIAMOND/RHOMBIC 35 (157)
    Cartridge Size
    Cartridge Size
    • 50 (145)
    • 65 (32)
    Front End Style
    Front End Style
    • MCS01 Modular Deep Grooving (79)
    Insert Size
    Insert Size
    • 1 (5)
    • 10 (12)
    • 1F (12)
    • 2 (131)
    • 2S (11)
    • 3 (119)
    • 3S (8)
    • 4 (92)
    • 4S (1)
    • 5 (58)
    • 5S (1)
    • 6 (68)
    • 8 (30)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(29)
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.116 in(2)
    • 0.121 in(1)
    • 0.13 in(1)
    • 0.138 in(40)
    • 0.185 in(1)
    • 0.197 in(11)
    • 0.21 in(39)
    • 0.244 in(1)
    • 0.25 in(2)
    • 0.276 in(37)
    • 0.293 in(8)
    • 0.294 in(15)
    • 0.3 in(1)
    • 0.315 in(10)
    • 0.334 in(4)
    • 0.354 in(1)
    • 0.394 in(29)
    • 0.416 in(3)
    • 0.433 in(4)
    • 0.473 in(61)
    • 0.5 in(8)
    • 0.531 in(9)
    • 0.548 in(2)
    • 0.551 in(98)
    • 0.572 in(4)
    • 0.63 in(76)
    • 0.669 in(41)
    • 0.69 in(3)
    • 0.748 in(22)
    • 0.75 in(18)
    • 0.787 in(26)
    • 0.842 in(2)
    • 0.866 in(32)
    • 0.946 in(29)
    • 1.0 in(6)
    • 1.024 in(67)
    • 1.25 in(6)
    • 1.26 in(26)
    • 1.5 in(3)
    • 1.575 in(12)
    • 1.95 in(2)
    • 2.25 in(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(29)
    • 1.026 mm(1)
    • 1.6 mm(2)
    • 1.701 mm(1)
    • 1.776 mm(2)
    • 1.901 mm(1)
    • 2.95 mm(2)
    • 3.075 mm(1)
    • 3.301 mm(1)
    • 3.5 mm(40)
    • 4.7 mm(1)
    • 5.0 mm(11)
    • 5.325 mm(39)
    • 6.2 mm(1)
    • 6.351 mm(2)
    • 7.0 mm(37)
    • 7.45 mm(8)
    • 7.476 mm(15)
    • 7.625 mm(1)
    • 8.0 mm(10)
    • 8.475 mm(4)
    • 9.0 mm(1)
    • 10.0 mm(29)
    • 10.55 mm(3)
    • 11.0 mm(4)
    • 12.0 mm(61)
    • 12.701 mm(8)
    • 13.5 mm(9)
    • 13.925 mm(2)
    • 14.0 mm(98)
    • 14.5 mm(4)
    • 16.0 mm(76)
    • 17.0 mm(41)
    • 17.5 mm(3)
    • 19.0 mm(22)
    • 19.05 mm(18)
    • 20.0 mm(26)
    • 21.375 mm(2)
    • 22.0 mm(32)
    • 24.0 mm(29)
    • 25.401 mm(6)
    • 26.0 mm(67)
    • 31.75 mm(6)
    • 32.0 mm(26)
    • 38.1 mm(3)
    • 40.0 mm(12)
    • 49.526 mm(2)
    • 57.151 mm(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 6 in(8)
    • 7 in(4)
    • 1.102 in(2)
    • 1.299 in(2)
    • 1.496 in(2)
    • 1.693 in(2)
    • 1.85 in(6)
    • 1.891 in(6)
    • 1.929 in(4)
    • 2.106 in(4)
    • 2.185 in(2)
    • 2.244 in(6)
    • 2.283 in(6)
    • 2.303 in(7)
    • 2.382 in(2)
    • 2.5 in(14)
    • 2.579 in(2)
    • 2.618 in(4)
    • 2.697 in(4)
    • 2.894 in(4)
    • 5.439 in(3)
    • 5.463 in(4)
    • 5.482 in(4)
    • 5.508 in(12)
    • 5.529 in(10)
    • 5.533 in(7)
    • 5.906 in(4)
    • 6.226 in(2)
    • 6.25 in(4)
    • 6.271 in(4)
    • 6.534 in(2)
    • 6.694 in(3)
    Gage Length
    Gage Length
    • 47 mm(6)
    • 48 mm(6)
    • 57 mm(6)
    • 58 mm(6)
    • 150 mm(4)
    • 49 mm(4)
    • 170 mm(3)
    • 28 mm(2)
    • 33 mm(2)
    • 38 mm(2)
    • 43 mm(2)
    • 53.5 mm(4)
    • 55.5 mm(2)
    • 58.5 mm(7)
    • 60.5 mm(2)
    • 63.5 mm(14)
    • 65.5 mm(2)
    • 66.5 mm(4)
    • 68.5 mm(4)
    • 73.5 mm(4)
    • 138.15 mm(3)
    • 138.75 mm(4)
    • 139.25 mm(4)
    • 139.9 mm(12)
    • 140.4 mm(10)
    • 140.55 mm(7)
    • 152.4 mm(8)
    • 158.15 mm(2)
    • 158.75 mm(4)
    • 159.25 mm(4)
    • 165.951 mm(2)
    • 177.8 mm(4)
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 1.651 mm(6)
    • 1.75 mm(6)
    • 1.901 mm(6)
    • 1.975 mm(8)
    • 2.475 mm(6)
    • 2.5 mm(2)
    • 2.551 mm(7)
    • 2.575 mm(8)
    • 2.725 mm(6)
    • 2.926 mm(18)
    • 3.45 mm(8)
    • 3.801 mm(30)
    • 4.075 mm(6)
    • 4.101 mm(1)
    • 4.15 mm(8)
    • 4.2 mm(1)
    • 4.4 mm(1)
    • 4.801 mm(6)
    • 4.9 mm(8)
    • 5.0 mm(1)
    • 5.301 mm(6)
    • 6.351 mm(1)
    • 6.4 mm(6)
    • 6.5 mm(8)
    • 7.301 mm(2)
    • 8.201 mm(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.065 in(6)
    • 0.069 in(6)
    • 0.075 in(6)
    • 0.078 in(8)
    • 0.097 in(6)
    • 0.098 in(2)
    • 0.1 in(7)
    • 0.101 in(8)
    • 0.107 in(6)
    • 0.115 in(18)
    • 0.136 in(8)
    • 0.15 in(30)
    • 0.16 in(6)
    • 0.161 in(1)
    • 0.163 in(8)
    • 0.165 in(1)
    • 0.174 in(1)
    • 0.189 in(6)
    • 0.193 in(8)
    • 0.197 in(1)
    • 0.209 in(6)
    • 0.25 in(1)
    • 0.252 in(6)
    • 0.256 in(8)
    • 0.288 in(2)
    • 0.323 in(5)
    Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 2.757 in(3)
    • 3.543 in(2)
    • 4.724 in(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 70.0 mm(3)
    • 90.0 mm(2)
    • 120.0 mm(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    insertGeometry
    Shape
    Shape
    • D-DIAMOND/RHOMBIC 55 (25)
    • K-PARALLELOGRAM 55 (9)
    • N/K-PARALLELOGRAM 55 (209)
    • PRISMATIC (355)
    • R-ROUND (52)
    • TN-TOP NOTCH (326)
    • V-DIAMOND/RHOMBIC 35 (122)
    Insert IC Size
    Insert IC Size
    • 4.75 mm(14)
    • 6.351 mm(27)
    • 9.525 mm(125)
    • 12.701 mm(35)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.187 in(14)
    • 0.25 in(27)
    • 0.375 in(125)
    • 0.5 in(35)
    Insert IC Size MinkomuInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 10 (13)
    • 2 (79)
    • 2S (1)
    • 3 (266)
    • 3S (1)
    • 4 (152)
    • 5 (42)
    • 5S (1)
    • 6 (71)
    • 8 (55)
    Cutting Edge Length
    Cutting Edge Length
    • 0.25 mm(2)
    • 0.426 mm(2)
    • 11.05 mm(1)
    • 11.076 mm(11)
    • 11.601 mm(130)
    • 11.625 mm(6)
    • 15.451 mm(48)
    • 15.5 mm(25)
    • 16.6 mm(110)
    • 17.5 mm(9)
    • 22.725 mm(6)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.01 in(2)
    • 0.017 in(2)
    • 0.435 in(1)
    • 0.436 in(11)
    • 0.457 in(130)
    • 0.458 in(6)
    • 0.608 in(48)
    • 0.61 in(25)
    • 0.654 in(110)
    • 0.69 in(9)
    • 0.895 in(6)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 08 (39)
    • 1 (7)
    • 15 (104)
    • 2 (2)
    • 20 (35)
    • 25 (13)
    • 32 (2)
    • FP (73)
    • FS (16)
    • HP (16)
    • MP (4)
    Cutting Tool Material
    Cutting Tool Material
    • B H (445)
    • B L (621)
    • C N (388)
    • D P (395)
    • H T (646)
    • H W (2034)
    Tolerance Class
    Tolerance Class
    • G (308)
    • M (65)
    • U (44)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (212)
    • BORING BAR HEAD (8)
    • SQUARE SHANK (538)
    System Size
    System Size
    • KM40TS (4)
    • KM4X63 (4)
    • KM50TS (8)
    • KM63TS (8)
    • KM63XMZ (11)
    • KM80ATC (8)
    • KM80TS (8)
    • PSC40 (4)
    • PSC50 (8)
    • PSC63 (8)
    • PSC80 (8)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(11)
    • 12.701 mm(14)
    • 15.875 mm(16)
    • 16.0 mm(14)
    • 19.0 mm(1)
    • 19.05 mm(22)
    • 20.0 mm(18)
    • 25.0 mm(22)
    • 25.401 mm(26)
    • 31.701 mm(2)
    • 31.75 mm(11)
    • 32.0 mm(16)
    • 38.1 mm(12)
    • 40.0 mm(19)
    • 44.45 mm(3)
    • 50.0 mm(18)
    • 50.801 mm(9)
    • 57.151 mm(1)
    • 63.0 mm(31)
    • 63.5 mm(7)
    • 80.0 mm(24)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(11)
    • 0.5 in(14)
    • 0.625 in(16)
    • 0.63 in(14)
    • 0.748 in(1)
    • 0.75 in(22)
    • 0.787 in(18)
    • 0.984 in(22)
    • 1.0 in(26)
    • 1.248 in(2)
    • 1.25 in(11)
    • 1.26 in(16)
    • 1.5 in(12)
    • 1.575 in(19)
    • 1.75 in(3)
    • 1.969 in(18)
    • 2.0 in(9)
    • 2.25 in(1)
    • 2.48 in(31)
    • 2.5 in(7)
    • 3.15 in(24)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.449 in(2)
    • 0.473 in(9)
    • 0.5 in(16)
    • 0.606 in(2)
    • 0.625 in(17)
    • 0.63 in(15)
    • 0.75 in(72)
    • 0.787 in(95)
    • 0.939 in(4)
    • 0.984 in(88)
    • 1.0 in(102)
    • 1.214 in(6)
    • 1.25 in(52)
    • 1.26 in(38)
    • 1.5 in(21)
    • 1.53 in(5)
    • 1.575 in(6)
    • 1.848 in(2)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 11.4 mm(2)
    • 12.0 mm(9)
    • 12.701 mm(16)
    • 15.4 mm(2)
    • 15.875 mm(17)
    • 16.0 mm(15)
    • 19.05 mm(72)
    • 20.0 mm(95)
    • 23.826 mm(4)
    • 25.0 mm(88)
    • 25.401 mm(102)
    • 30.826 mm(6)
    • 31.75 mm(52)
    • 32.0 mm(38)
    • 38.1 mm(21)
    • 38.825 mm(5)
    • 40.0 mm(6)
    • 46.95 mm(2)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(9)
    • 0.5 in(16)
    • 0.625 in(17)
    • 0.63 in(16)
    • 0.742 in(1)
    • 0.75 in(71)
    • 0.787 in(94)
    • 0.864 in(4)
    • 0.984 in(104)
    • 1.0 in(102)
    • 1.141 in(6)
    • 1.25 in(52)
    • 1.26 in(22)
    • 1.455 in(5)
    • 1.5 in(21)
    • 1.575 in(6)
    • 1.848 in(2)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(9)
    • 12.701 mm(16)
    • 15.875 mm(17)
    • 16.0 mm(16)
    • 18.85 mm(1)
    • 19.05 mm(71)
    • 20.0 mm(94)
    • 21.951 mm(4)
    • 25.0 mm(104)
    • 25.401 mm(102)
    • 28.951 mm(6)
    • 31.75 mm(52)
    • 32.0 mm(22)
    • 36.95 mm(5)
    • 38.1 mm(21)
    • 40.0 mm(6)
    • 46.95 mm(2)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    A4™ • Dvoustranné drážkování
    (580)

    A4™ • Dvoustranné drážkování

    Beyond Evolution
    (568)

    Beyond Evolution

    Drážkování Top Notch™
    (524)

    Drážkování Top Notch™

    Profilování Top Notch™
    (465)

    Profilování Top Notch™

    Kopírování K-Lock™
    (105)

    Kopírování K-Lock™

    Vybrat filtry
    Filtry
    Filtry
      Zobrazit filtry v
      Metrické
      Palcové
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (1924)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1924)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1924)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1924)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1924)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1924)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1924)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1924)
      • M Stainless Steel (1814)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1814)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1814)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1814)
      • K Cast Iron (1705)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1705)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1701)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1696)
      • N Non-Ferrous Materials (1668)
        • N1
          Wrought Aluminum (1638)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1578)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(369)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (1668)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1592)
        • N6
          Carbon, Graphite Composites, CFRP (1563)
        • N7
          MMC's (333)
      • S High-Temp Alloys (1835)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1835)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1835)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1835)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1812)
      • H Hardened Materials (1184)
        • H1
          Hardened Materials 44-48 HRC(1184)
        • H2
          Hardened Materials 48-55 HRC(1103)
        • H3
          Hardened Materials 56-60 HRC(364)
        • H4
          Hardened Materials >60 HRC(364)
      • C CFRP Materials (230)
        • C1
          CFRP, CFRP / CFRP (215)
        • C2
          CFRP / Aluminium CFRP / Non-Ferrous (143)
      Vybrat první volbu
      • BR (23)
      • CN (190)
      • DE (190)
      • GB (108)
      • IN (33)
      • SG (67)
      • US (278)
      Applications
      Applications
      • Back BoringBack Boring (205)
      • BoringBoring (303)
      • CRT ProfilingCRT Profiling (20)
      • Chamfer TurningChamfer Turning (69)
      • Cut-OffCut-Off (353)
      • Deep GroovingDeep Grooving (123)
      • Face GroovingFace Grooving (1023)
      • FacingFacing (282)
      • GroovingGrooving (1260)
      • ID FacingID Facing (218)
      • ID GroovingID Grooving (701)
      • ID Thread TurningID Thread Turning (69)
      • Multiple Direction CuttingMultiple Direction Cutting (578)
      • OD Thread TurningOD Thread Turning (127)
      • Plunge TurningPlunge Turning (530)
      • ProfilingProfiling (542)
      • TRN BoringTRN Boring (50)
      • ThreadingThreading (130)
      • TurningTurning (452)
      Type of Thread
      Type of Thread
      • 60 (187)
      • ACME (122)
      • API (114)
      • API RD (86)
      • BSW (78)
      • BUTTRESS (182)
      • M (114)
      • NPT (78)
      • STUB ACME (78)
      • UN (182)
      • UNJ (78)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (1259)
      • Lightly Interrupted Cut (1486)
      • Smooth Cut (1675)
      • Varying Depth of Cut (1556)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 45.0 (12)
      • 60.0 (4)
      • 62.5 (2)
      • 72.5 (2)
      • 90.0 (831)
      • 92.25 (27)
      • 93.0 (1)
      • 95.0 (77)
      • 100.0 (1)
      • 107.5 (9)
      • 117.5 (8)
      Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Bolt-On Head (8)
      • Boring Bar Shank (212)
      • Toolholder (486)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (871)
      • 2.0 (1369)
      Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 0.75 in(2)
      • 1.625 in(6)
      • 1.881 in(10)
      • 1.954 in(4)
      • 2.037 in(8)
      • 2.077 in(31)
      • 2.138 in(5)
      • 2.156 in(47)
      • 2.165 in(1)
      • 2.192 in(1)
      • 2.269 in(21)
      • 2.274 in(4)
      • 2.347 in(4)
      • 2.352 in(14)
      • 2.431 in(6)
      • 2.5 in(4)
      • 2.584 in(2)
      • 2.638 in(6)
      • 2.668 in(4)
      • 2.757 in(2)
      • 2.888 in(3)
      • 3.15 in(3)
      • 3.338 in(2)
      • 3.5 in(6)
      • 3.638 in(2)
      • 3.938 in(6)
      • 4.0 in(5)
      • 4.5 in(73)
      • 4.921 in(110)
      • 4.933 in(12)
      • 5.0 in(40)
      • 5.327 in(2)
      • 5.348 in(2)
      • 5.372 in(4)
      • 5.394 in(4)
      • 5.463 in(4)
      • 5.508 in(12)
      • 5.906 in(120)
      • 5.915 in(4)
      • 5.917 in(4)
      • 5.961 in(10)
      • 6.0 in(179)
      • 6.114 in(2)
      • 6.136 in(2)
      • 6.25 in(4)
      • 6.372 in(2)
      • 6.394 in(2)
      • 6.694 in(46)
      • 6.703 in(4)
      • 7.0 in(23)
      • 7.079 in(2)
      • 7.087 in(14)
      • 7.263 in(2)
      • 7.875 in(36)
      • 7.931 in(7)
      • 7.976 in(1)
      • 8.0 in(7)
      • 8.012 in(4)
      • 8.019 in(6)
      • 8.02 in(4)
      • 8.055 in(1)
      • 8.132 in(2)
      • 8.15 in(1)
      • 9.843 in(20)
      • 9.879 in(1)
      • 10.0 in(15)
      • 10.02 in(3)
      • 10.025 in(1)
      • 10.063 in(2)
      • 10.095 in(2)
      • 11.811 in(12)
      • 12.0 in(14)
      • 12.02 in(3)
      • 12.025 in(2)
      • 13.781 in(2)
      • 14.0 in(12)
      • 14.07 in(1)
      • 16.0 in(10)
      Over All Length [L] MinkomuOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 19.05 mm(2)
      • 41.276 mm(6)
      • 47.75 mm(10)
      • 49.625 mm(4)
      • 51.75 mm(8)
      • 52.75 mm(31)
      • 54.301 mm(5)
      • 54.75 mm(47)
      • 55.0 mm(1)
      • 55.676 mm(1)
      • 57.625 mm(21)
      • 57.75 mm(4)
      • 59.625 mm(4)
      • 59.75 mm(14)
      • 61.75 mm(6)
      • 63.5 mm(4)
      • 65.625 mm(2)
      • 67.0 mm(6)
      • 67.75 mm(4)
      • 70.0 mm(2)
      • 73.351 mm(3)
      • 80.0 mm(3)
      • 84.775 mm(2)
      • 88.9 mm(6)
      • 92.4 mm(2)
      • 100.0 mm(6)
      • 101.601 mm(5)
      • 114.301 mm(73)
      • 125.0 mm(110)
      • 125.301 mm(12)
      • 127.0 mm(40)
      • 135.3 mm(2)
      • 135.85 mm(2)
      • 136.451 mm(4)
      • 137.0 mm(4)
      • 138.75 mm(4)
      • 139.9 mm(12)
      • 150.0 mm(120)
      • 150.25 mm(4)
      • 150.3 mm(4)
      • 151.4 mm(10)
      • 152.4 mm(179)
      • 155.3 mm(2)
      • 155.851 mm(2)
      • 158.75 mm(4)
      • 161.851 mm(2)
      • 162.4 mm(2)
      • 170.0 mm(46)
      • 170.25 mm(4)
      • 177.8 mm(23)
      • 179.8 mm(2)
      • 180.0 mm(14)
      • 184.451 mm(2)
      • 200.0 mm(36)
      • 201.451 mm(7)
      • 202.601 mm(1)
      • 203.201 mm(7)
      • 203.5 mm(4)
      • 203.675 mm(6)
      • 203.701 mm(4)
      • 204.601 mm(1)
      • 206.55 mm(2)
      • 207.0 mm(1)
      • 250.0 mm(20)
      • 250.925 mm(1)
      • 254.0 mm(15)
      • 254.5 mm(3)
      • 254.601 mm(1)
      • 255.601 mm(2)
      • 256.401 mm(2)
      • 300.0 mm(12)
      • 304.8 mm(14)
      • 305.3 mm(3)
      • 305.401 mm(2)
      • 350.0 mm(2)
      • 355.6 mm(12)
      • 357.375 mm(1)
      • 406.401 mm(10)
      Over All Length [L] MinkomuOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.002 in(78)
      • 0.003 in(187)
      • 0.004 in(146)
      • 0.005 in(161)
      • 0.006 in(123)
      • 0.007 in(150)
      • 0.008 in(710)
      • 0.01 in(150)
      • 0.011 in(78)
      • 0.012 in(144)
      • 0.014 in(117)
      • 0.016 in(768)
      • 0.019 in(114)
      • 0.02 in(242)
      • 0.023 in(117)
      • 0.03 in(70)
      • 0.031 in(748)
      • 0.033 in(11)
      • 0.034 in(62)
      • 0.035 in(114)
      • 0.039 in(372)
      • 0.041 in(141)
      • 0.046 in(20)
      • 0.047 in(402)
      • 0.048 in(18)
      • 0.049 in(147)
      • 0.06 in(312)
      • 0.061 in(53)
      • 0.062 in(94)
      • 0.063 in(429)
      • 0.065 in(50)
      • 0.069 in(147)
      • 0.078 in(93)
      • 0.079 in(237)
      • 0.08 in(72)
      • 0.081 in(55)
      • 0.089 in(114)
      • 0.094 in(146)
      • 0.095 in(163)
      • 0.096 in(53)
      • 0.098 in(137)
      • 0.099 in(61)
      • 0.1 in(45)
      • 0.119 in(103)
      • 0.12 in(109)
      • 0.125 in(211)
      • 0.128 in(41)
      • 0.156 in(50)
      • 0.157 in(50)
      • 0.158 in(56)
      • 0.159 in(33)
      • 0.187 in(8)
      • 0.188 in(38)
      • 0.197 in(12)
      • 0.198 in(15)
      • 0.25 in(16)
      Corner Radius MinkomuCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.05 mm(78)
      • 0.076 mm(187)
      • 0.1 mm(146)
      • 0.125 mm(161)
      • 0.151 mm(123)
      • 0.176 mm(150)
      • 0.2 mm(710)
      • 0.225 mm(78)
      • 0.25 mm(150)
      • 0.275 mm(78)
      • 0.301 mm(144)
      • 0.325 mm(117)
      • 0.351 mm(114)
      • 0.4 mm(768)
      • 0.45 mm(114)
      • 0.476 mm(40)
      • 0.5 mm(242)
      • 0.576 mm(117)
      • 0.75 mm(70)
      • 0.775 mm(213)
      • 0.8 mm(535)
      • 0.826 mm(11)
      • 0.851 mm(62)
      • 0.9 mm(114)
      • 1.0 mm(372)
      • 1.05 mm(141)
      • 1.175 mm(20)
      • 1.201 mm(402)
      • 1.225 mm(18)
      • 1.25 mm(147)
      • 1.5 mm(300)
      • 1.526 mm(90)
      • 1.55 mm(53)
      • 1.576 mm(94)
      • 1.6 mm(429)
      • 1.651 mm(50)
      • 1.75 mm(147)
      • 1.975 mm(93)
      • 2.0 mm(237)
      • 2.025 mm(72)
      • 2.051 mm(55)
      • 2.25 mm(114)
      • 2.375 mm(146)
      • 2.401 mm(163)
      • 2.45 mm(53)
      • 2.5 mm(137)
      • 2.526 mm(61)
      • 2.551 mm(45)
      • 3.0 mm(103)
      • 3.026 mm(62)
      • 3.051 mm(47)
      • 3.176 mm(211)
      • 3.25 mm(41)
      • 3.95 mm(30)
      • 3.975 mm(20)
      • 4.0 mm(50)
      • 4.025 mm(56)
      • 4.05 mm(33)
      • 4.75 mm(8)
      • 4.775 mm(38)
      • 5.0 mm(12)
      • 5.025 mm(15)
      • 6.351 mm(16)
      Corner Radius MinkomuCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(1276)
      Corner Chamfer MinkomuCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(1276)
      Corner Chamfer MinkomuCorner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • K00326 (29)
      • K1 (5)
      • K1025 (132)
      • K2885 (146)
      • K313 (947)
      • K420 (262)
      • K4H (110)
      • K6 (4)
      • K68 (341)
      • K8735 (29)
      • KB1345 (139)
      • KB1630 (359)
      • KB5625 (319)
      • KBH20 (281)
      • KC250 (233)
      • KC5010 (790)
      • KC5025 (751)
      • KC5410 (328)
      • KC5510 (20)
      • KC710 (182)
      • KC720 (216)
      • KC722 (182)
      • KC730 (414)
      • KC7310 (139)
      • KC732 (224)
      • KC8050 (152)
      • KC810 (298)
      • KC850 (353)
      • KC9025 (94)
      • KC910 (251)
      • KC9105 (62)
      • KC9110 (635)
      • KC9120 (112)
      • KC9125 (440)
      • KC9225 (152)
      • KC9315 (89)
      • KC9320 (182)
      • KC935 (328)
      • KC950 (276)
      • KCD25 (29)
      • KCK05 (37)
      • KCK15B (31)
      • KCK20 (415)
      • KCK20B (433)
      • KCM15B (59)
      • KCM25 (100)
      • KCM25B (5)
      • KCM35B (166)
      • KCP05 (93)
      • KCP10 (451)
      • KCP10B (530)
      • KCP25 (452)
      • KCP25B (582)
      • KCP25C (132)
      • KCS10 (56)
      • KCS10B (255)
      • KCU10 (1107)
      • KCU10B (1094)
      • KCU25 (1072)
      • KCU25B (1001)
      • KD050 (122)
      • KD081 (107)
      • KD100 (191)
      • KD120 (200)
      • KD1405 (190)
      • KD1425 (179)
      • KMS (127)
      • KS15 (29)
      • KT125 (82)
      • KT150 (87)
      • KT175 (199)
      • KT315 (646)
      • KU10 (339)
      • KU10T (182)
      • KU25T (182)
      • KU30T (423)
      • KY3000 (114)
      • KY3500 (272)
      • KYS30 (121)
      • SP88F8 (52)
      Hand Of Tool
      Hand Of Tool
      • L (333)
      • N (14)
      • R (411)
      Wiper Insert
      Wiper Insert
      • N (1893)
      F Dimension
      F Dimension
      • 6.551 mm(2)
      • 7.0 mm(2)
      • 8.175 mm(1)
      • 8.225 mm(2)
      • 8.525 mm(4)
      • 8.875 mm(2)
      • 9.0 mm(6)
      • 9.4 mm(2)
      • 9.525 mm(6)
      • 9.75 mm(1)
      • 10.0 mm(1)
      • 10.226 mm(1)
      • 10.25 mm(1)
      • 10.3 mm(1)
      • 10.775 mm(1)
      • 10.875 mm(1)
      • 10.976 mm(2)
      • 11.0 mm(11)
      • 11.05 mm(7)
      • 11.101 mm(2)
      • 12.0 mm(1)
      • 12.101 mm(2)
      • 12.175 mm(2)
      • 12.226 mm(1)
      • 12.5 mm(1)
      • 12.576 mm(6)
      • 12.625 mm(1)
      • 12.701 mm(9)
      • 12.726 mm(3)
      • 12.75 mm(2)
      • 12.8 mm(4)
      • 12.851 mm(2)
      • 12.9 mm(2)
      • 13.0 mm(17)
      • 13.025 mm(2)
      • 13.951 mm(2)
      • 13.976 mm(4)
      • 14.0 mm(2)
      • 14.15 mm(2)
      • 14.275 mm(10)
      • 15.875 mm(6)
      • 15.925 mm(1)
      • 15.976 mm(4)
      • 16.0 mm(7)
      • 16.026 mm(1)
      • 16.1 mm(1)
      • 16.2 mm(5)
      • 16.225 mm(2)
      • 16.25 mm(2)
      • 16.875 mm(5)
      • 17.0 mm(15)
      • 17.3 mm(6)
      • 17.35 mm(2)
      • 17.475 mm(4)
      • 17.5 mm(2)
      • 18.925 mm(2)
      • 19.026 mm(1)
      • 19.05 mm(9)
      • 19.075 mm(16)
      • 19.1 mm(1)
      • 19.125 mm(18)
      • 19.225 mm(7)
      • 19.25 mm(2)
      • 19.425 mm(2)
      • 20.0 mm(4)
      • 20.05 mm(14)
      • 20.1 mm(28)
      • 20.201 mm(26)
      • 20.3 mm(2)
      • 21.125 mm(4)
      • 21.776 mm(1)
      • 21.8 mm(1)
      • 22.0 mm(14)
      • 22.225 mm(3)
      • 22.6 mm(2)
      • 25.0 mm(14)
      • 25.05 mm(12)
      • 25.1 mm(20)
      • 25.201 mm(14)
      • 25.3 mm(2)
      • 25.326 mm(2)
      • 25.35 mm(2)
      • 25.401 mm(21)
      • 25.425 mm(12)
      • 25.475 mm(21)
      • 25.5 mm(4)
      • 25.576 mm(8)
      • 25.701 mm(5)
      • 25.776 mm(1)
      • 25.8 mm(2)
      • 25.875 mm(1)
      • 25.901 mm(2)
      • 26.0 mm(2)
      • 26.225 mm(2)
      • 27.0 mm(5)
      • 27.901 mm(1)
      • 28.451 mm(1)
      • 28.576 mm(3)
      • 29.875 mm(3)
      • 30.0 mm(8)
      • 30.401 mm(1)
      • 30.8 mm(1)
      • 31.75 mm(32)
      • 31.826 mm(10)
      • 31.925 mm(4)
      • 32.0 mm(25)
      • 32.051 mm(4)
      • 32.075 mm(8)
      • 32.15 mm(2)
      • 32.176 mm(4)
      • 32.25 mm(2)
      • 32.301 mm(4)
      • 32.4 mm(2)
      • 32.525 mm(2)
      • 32.575 mm(2)
      • 32.65 mm(2)
      • 33.1 mm(1)
      • 34.875 mm(1)
      • 34.926 mm(4)
      • 35.0 mm(2)
      • 35.1 mm(1)
      • 35.4 mm(1)
      • 38.1 mm(19)
      • 38.176 mm(2)
      • 38.275 mm(2)
      • 38.401 mm(2)
      • 38.5 mm(2)
      • 38.6 mm(2)
      • 38.75 mm(2)
      • 38.901 mm(1)
      • 38.926 mm(2)
      • 39.1 mm(2)
      • 40.0 mm(4)
      • 40.176 mm(2)
      • 40.301 mm(2)
      • 40.651 mm(2)
      • 41.276 mm(5)
      • 44.45 mm(2)
      • 47.625 mm(2)
      • 50.801 mm(7)
      F Dimension MinkomuF Dimension Max
      F Dimension
      F Dimension
      • 0.258 in(2)
      • 0.276 in(2)
      • 0.322 in(1)
      • 0.324 in(2)
      • 0.336 in(4)
      • 0.35 in(2)
      • 0.354 in(6)
      • 0.37 in(2)
      • 0.375 in(6)
      • 0.384 in(1)
      • 0.394 in(1)
      • 0.403 in(1)
      • 0.404 in(1)
      • 0.406 in(1)
      • 0.424 in(1)
      • 0.428 in(1)
      • 0.432 in(2)
      • 0.433 in(11)
      • 0.435 in(7)
      • 0.437 in(2)
      • 0.473 in(1)
      • 0.477 in(2)
      • 0.48 in(2)
      • 0.481 in(1)
      • 0.492 in(1)
      • 0.495 in(6)
      • 0.497 in(1)
      • 0.5 in(9)
      • 0.501 in(3)
      • 0.502 in(2)
      • 0.504 in(4)
      • 0.506 in(2)
      • 0.508 in(2)
      • 0.512 in(17)
      • 0.513 in(2)
      • 0.549 in(2)
      • 0.55 in(4)
      • 0.551 in(2)
      • 0.557 in(2)
      • 0.562 in(10)
      • 0.625 in(6)
      • 0.627 in(1)
      • 0.629 in(4)
      • 0.63 in(7)
      • 0.631 in(1)
      • 0.634 in(1)
      • 0.638 in(5)
      • 0.639 in(2)
      • 0.64 in(2)
      • 0.664 in(5)
      • 0.669 in(15)
      • 0.681 in(6)
      • 0.683 in(2)
      • 0.689 in(4)
      • 0.69 in(2)
      • 0.745 in(2)
      • 0.749 in(1)
      • 0.75 in(9)
      • 0.751 in(16)
      • 0.752 in(1)
      • 0.753 in(18)
      • 0.757 in(7)
      • 0.758 in(2)
      • 0.765 in(2)
      • 0.787 in(4)
      • 0.789 in(14)
      • 0.791 in(28)
      • 0.795 in(26)
      • 0.799 in(2)
      • 0.833 in(4)
      • 0.857 in(1)
      • 0.858 in(1)
      • 0.866 in(14)
      • 0.875 in(3)
      • 0.89 in(2)
      • 0.984 in(14)
      • 0.986 in(12)
      • 0.988 in(20)
      • 0.992 in(14)
      • 0.996 in(2)
      • 0.997 in(2)
      • 0.998 in(2)
      • 1.0 in(21)
      • 1.002 in(12)
      • 1.004 in(25)
      • 1.008 in(8)
      • 1.012 in(5)
      • 1.016 in(3)
      • 1.02 in(3)
      • 1.024 in(2)
      • 1.032 in(2)
      • 1.063 in(5)
      • 1.098 in(1)
      • 1.12 in(1)
      • 1.125 in(3)
      • 1.176 in(3)
      • 1.181 in(8)
      • 1.197 in(1)
      • 1.213 in(1)
      • 1.25 in(32)
      • 1.254 in(10)
      • 1.258 in(4)
      • 1.26 in(25)
      • 1.262 in(4)
      • 1.264 in(8)
      • 1.266 in(2)
      • 1.268 in(4)
      • 1.27 in(2)
      • 1.272 in(4)
      • 1.276 in(2)
      • 1.281 in(2)
      • 1.282 in(2)
      • 1.285 in(2)
      • 1.303 in(1)
      • 1.373 in(1)
      • 1.375 in(4)
      • 1.379 in(2)
      • 1.383 in(1)
      • 1.395 in(1)
      • 1.5 in(19)
      • 1.504 in(2)
      • 1.508 in(2)
      • 1.512 in(2)
      • 1.516 in(2)
      • 1.52 in(2)
      • 1.526 in(2)
      • 1.532 in(1)
      • 1.534 in(2)
      • 1.539 in(2)
      • 1.575 in(4)
      • 1.582 in(2)
      • 1.587 in(2)
      • 1.6 in(2)
      • 1.625 in(5)
      • 1.75 in(2)
      • 1.875 in(2)
      • 2.0 in(7)
      F Dimension MinkomuF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(88)
      • 11.175 mm(2)
      • 11.5 mm(2)
      • 15.875 mm(4)
      • 16.0 mm(12)
      • 16.776 mm(2)
      • 17.0 mm(3)
      • 17.026 mm(2)
      • 18.5 mm(2)
      • 18.55 mm(4)
      • 19.05 mm(1)
      • 20.0 mm(21)
      • 20.326 mm(1)
      • 21.0 mm(3)
      • 22.0 mm(3)
      • 22.85 mm(4)
      • 24.901 mm(6)
      • 25.0 mm(33)
      • 25.401 mm(6)
      • 26.0 mm(7)
      • 26.925 mm(1)
      • 28.576 mm(4)
      • 31.75 mm(6)
      • 32.0 mm(20)
      • 33.025 mm(5)
      • 34.0 mm(4)
      • 34.926 mm(6)
      • 36.0 mm(5)
      • 38.0 mm(1)
      • 38.1 mm(8)
      • 40.0 mm(14)
      • 41.301 mm(39)
      • 42.0 mm(5)
      • 44.0 mm(6)
      • 44.45 mm(2)
      • 45.051 mm(1)
      • 46.475 mm(1)
      • 47.6 mm(39)
      • 48.0 mm(3)
      • 50.0 mm(6)
      • 50.801 mm(4)
      • 52.0 mm(14)
      • 53.85 mm(1)
      • 54.0 mm(4)
      • 55.875 mm(3)
      • 56.625 mm(29)
      • 57.151 mm(6)
      • 57.2 mm(15)
      • 58.0 mm(4)
      • 60.0 mm(4)
      • 60.325 mm(4)
      • 63.0 mm(1)
      • 63.5 mm(22)
      • 64.0 mm(4)
      • 65.0 mm(1)
      • 68.0 mm(4)
      • 69.851 mm(4)
      • 70.0 mm(8)
      • 76.2 mm(8)
      • 80.0 mm(7)
      • 82.551 mm(4)
      • 88.9 mm(117)
      • 90.0 mm(8)
      • 92.0 mm(3)
      • 100.0 mm(4)
      • 120.0 mm(13)
      • 127.0 mm(1)
      • 130.0 mm(4)
      • 132.0 mm(4)
      • 139.701 mm(232)
      • 146.05 mm(3)
      • 174.601 mm(39)
      • 184.0 mm(3)
      • 200.0 mm(8)
      • 209.601 mm(103)
      • 222.3 mm(15)
      • 250.0 mm(6)
      • 290.0 mm(8)
      • 333.0 mm(3)
      Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(88)
      • 0.44 in(2)
      • 0.453 in(2)
      • 0.625 in(4)
      • 0.63 in(12)
      • 0.66 in(2)
      • 0.669 in(3)
      • 0.67 in(2)
      • 0.728 in(2)
      • 0.73 in(4)
      • 0.75 in(1)
      • 0.787 in(21)
      • 0.8 in(1)
      • 0.828 in(3)
      • 0.866 in(3)
      • 0.9 in(4)
      • 0.98 in(6)
      • 0.984 in(33)
      • 1.0 in(6)
      • 1.024 in(7)
      • 1.06 in(1)
      • 1.125 in(4)
      • 1.25 in(6)
      • 1.26 in(20)
      • 1.3 in(5)
      • 1.339 in(4)
      • 1.375 in(6)
      • 1.417 in(5)
      • 1.496 in(1)
      • 1.5 in(8)
      • 1.575 in(14)
      • 1.627 in(39)
      • 1.655 in(5)
      • 1.732 in(6)
      • 1.75 in(2)
      • 1.774 in(1)
      • 1.83 in(1)
      • 1.874 in(39)
      • 1.891 in(3)
      • 1.969 in(6)
      • 2.0 in(4)
      • 2.047 in(14)
      • 2.12 in(1)
      • 2.126 in(4)
      • 2.2 in(3)
      • 2.229 in(29)
      • 2.25 in(6)
      • 2.253 in(15)
      • 2.283 in(4)
      • 2.362 in(4)
      • 2.375 in(4)
      • 2.48 in(1)
      • 2.5 in(22)
      • 2.52 in(4)
      • 2.559 in(1)
      • 2.677 in(4)
      • 2.75 in(4)
      • 2.757 in(8)
      • 3.0 in(8)
      • 3.15 in(7)
      • 3.25 in(4)
      • 3.5 in(117)
      • 3.543 in(8)
      • 3.622 in(3)
      • 3.938 in(4)
      • 4.724 in(13)
      • 5.0 in(1)
      • 5.118 in(4)
      • 5.197 in(4)
      • 5.5 in(232)
      • 5.75 in(3)
      • 6.875 in(39)
      • 7.244 in(3)
      • 7.875 in(8)
      • 8.252 in(103)
      • 8.752 in(15)
      • 9.843 in(6)
      • 11.417 in(8)
      • 13.11 in(3)
      Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 0.787 in(4)
      • 0.828 in(3)
      • 0.906 in(1)
      • 0.984 in(6)
      • 1.024 in(2)
      • 1.063 in(9)
      • 1.102 in(7)
      • 1.339 in(7)
      • 1.379 in(2)
      • 1.417 in(13)
      • 1.811 in(1)
      • 1.891 in(4)
      • 2.126 in(2)
      • 2.283 in(4)
      • 2.52 in(3)
      • 2.835 in(3)
      • 2.914 in(3)
      • 3.307 in(4)
      • 3.701 in(4)
      • 3.938 in(8)
      • 4.409 in(4)
      • 4.882 in(3)
      • 5.354 in(4)
      • 5.906 in(3)
      • 6.299 in(4)
      • 7.875 in(2)
      • 8.346 in(4)
      • 10.0 in(4)
      • 11.811 in(12)
      • 39.331 in(11)
      • 393.661 in(519)
      Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 20.0 mm(4)
      • 21.0 mm(3)
      • 23.0 mm(1)
      • 25.0 mm(6)
      • 26.0 mm(2)
      • 27.0 mm(9)
      • 28.0 mm(7)
      • 34.0 mm(7)
      • 35.0 mm(2)
      • 36.0 mm(13)
      • 46.0 mm(1)
      • 48.0 mm(4)
      • 54.0 mm(2)
      • 58.0 mm(4)
      • 64.0 mm(3)
      • 72.0 mm(3)
      • 74.0 mm(3)
      • 84.0 mm(4)
      • 94.0 mm(4)
      • 100.0 mm(8)
      • 112.0 mm(4)
      • 124.0 mm(3)
      • 136.0 mm(4)
      • 150.0 mm(3)
      • 160.0 mm(4)
      • 200.0 mm(2)
      • 212.0 mm(4)
      • 254.0 mm(4)
      • 300.0 mm(12)
      • 999.0 mm(11)
      • 9999.0 mm(519)
      Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
      Countersunk Angle
      Countersunk Angle
      • 17.5 (4)
      Countersunk Angle MinkomuCountersunk Angle Max
      Cutting Direction
      Cutting Direction
      • B (94)
      • E (490)
      • P (4)
      • S (170)
      Rake Angle Style
      Rake Angle Style
      • DOUBLE NEGATIVE (7)
      • DOUBLE POSITIVE (5)
      • NEGATIVE-ZERO (90)
      • NEUTRAL (ZERO) (315)
      • POSITIVE-ZERO (186)
      Maximum Bore Depth
      Maximum Bore Depth
      • 0.946 in(4)
      • 1.0 in(14)
      • 1.23 in(1)
      • 1.232 in(1)
      • 1.25 in(6)
      • 1.26 in(4)
      • 1.291 in(1)
      • 1.5 in(7)
      • 1.575 in(15)
      • 1.586 in(2)
      • 1.587 in(2)
      • 1.891 in(4)
      • 1.969 in(9)
      • 1.98 in(8)
      • 2.0 in(34)
      • 2.496 in(2)
      • 2.499 in(1)
      • 2.5 in(6)
      • 2.511 in(1)
      • 2.52 in(19)
      • 2.835 in(2)
      • 3.0 in(13)
      • 3.15 in(17)
      • 3.75 in(4)
      • 3.781 in(2)
      • 3.938 in(11)
      • 4.0 in(13)
      • 4.5 in(4)
      • 4.992 in(1)
      • 5.0 in(4)
      • 5.039 in(6)
      • 6.0 in(9)
      • 6.299 in(5)
      • 7.0 in(3)
      • 7.875 in(2)
      • 8.0 in(8)
      • 9.0 in(1)
      • 10.0 in(7)
      Maximum Bore Depth MinkomuMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 24.0 mm(4)
      • 25.401 mm(14)
      • 31.25 mm(1)
      • 31.3 mm(1)
      • 31.75 mm(6)
      • 32.0 mm(4)
      • 32.801 mm(1)
      • 38.1 mm(7)
      • 40.0 mm(15)
      • 40.276 mm(2)
      • 40.301 mm(2)
      • 48.0 mm(4)
      • 50.0 mm(9)
      • 50.301 mm(8)
      • 50.801 mm(34)
      • 63.401 mm(2)
      • 63.475 mm(1)
      • 63.5 mm(6)
      • 63.75 mm(1)
      • 64.0 mm(19)
      • 72.0 mm(2)
      • 76.2 mm(13)
      • 80.0 mm(17)
      • 95.25 mm(4)
      • 96.0 mm(2)
      • 100.0 mm(11)
      • 101.601 mm(13)
      • 114.301 mm(4)
      • 126.801 mm(1)
      • 127.0 mm(4)
      • 128.0 mm(6)
      • 152.4 mm(9)
      • 160.0 mm(5)
      • 177.8 mm(3)
      • 200.0 mm(2)
      • 203.201 mm(8)
      • 228.601 mm(1)
      • 254.0 mm(7)
      Maximum Bore Depth MinkomuMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • C (19)
      • S (201)
      frontEnd
      Adapter Front-End
      Adapter Front-End
      • CARTRIDGE MOUNT (79)
      Clamp Style
      Clamp Style
      • N (297)
      • T (53)
      • Y (599)
      Cutting Width
      Cutting Width
      • 0.02 in(68)
      • 0.031 in(73)
      • 0.035 in(68)
      • 0.039 in(153)
      • 0.041 in(68)
      • 0.047 in(151)
      • 0.055 in(68)
      • 0.058 in(68)
      • 0.06 in(157)
      • 0.062 in(218)
      • 0.063 in(14)
      • 0.067 in(68)
      • 0.069 in(146)
      • 0.073 in(78)
      • 0.077 in(68)
      • 0.078 in(78)
      • 0.079 in(304)
      • 0.084 in(158)
      • 0.088 in(146)
      • 0.089 in(106)
      • 0.094 in(99)
      • 0.095 in(248)
      • 0.097 in(79)
      • 0.098 in(200)
      • 0.104 in(1)
      • 0.105 in(78)
      • 0.108 in(146)
      • 0.11 in(78)
      • 0.119 in(336)
      • 0.12 in(79)
      • 0.122 in(156)
      • 0.123 in(154)
      • 0.125 in(411)
      • 0.126 in(182)
      • 0.128 in(146)
      • 0.129 in(68)
      • 0.13 in(128)
      • 0.131 in(40)
      • 0.138 in(183)
      • 0.143 in(78)
      • 0.147 in(36)
      • 0.15 in(32)
      • 0.151 in(36)
      • 0.152 in(68)
      • 0.156 in(93)
      • 0.157 in(237)
      • 0.161 in(104)
      • 0.162 in(129)
      • 0.167 in(114)
      • 0.169 in(78)
      • 0.177 in(114)
      • 0.178 in(78)
      • 0.185 in(95)
      • 0.187 in(121)
      • 0.188 in(200)
      • 0.189 in(119)
      • 0.192 in(93)
      • 0.193 in(102)
      • 0.195 in(78)
      • 0.196 in(78)
      • 0.197 in(140)
      • 0.199 in(49)
      • 0.201 in(49)
      • 0.202 in(143)
      • 0.213 in(36)
      • 0.217 in(36)
      • 0.218 in(8)
      • 0.219 in(36)
      • 0.237 in(142)
      • 0.239 in(52)
      • 0.241 in(109)
      • 0.25 in(187)
      • 0.255 in(41)
      • 0.256 in(88)
      • 0.276 in(37)
      • 0.281 in(45)
      • 0.289 in(36)
      • 0.312 in(59)
      • 0.313 in(20)
      • 0.315 in(52)
      • 0.317 in(46)
      • 0.319 in(18)
      • 0.32 in(61)
      • 0.345 in(3)
      • 0.354 in(3)
      • 0.375 in(29)
      • 0.38 in(8)
      • 0.381 in(3)
      • 0.382 in(8)
      • 0.384 in(8)
      • 0.394 in(20)
      • 0.396 in(8)
      • 0.399 in(23)
      Cutting Width MinkomuCutting Width Max
      Cutting Width
      Cutting Width
      • 0.5 mm(68)
      • 0.775 mm(73)
      • 0.8 mm(68)
      • 0.9 mm(68)
      • 1.0 mm(153)
      • 1.05 mm(68)
      • 1.201 mm(151)
      • 1.401 mm(68)
      • 1.475 mm(68)
      • 1.5 mm(157)
      • 1.576 mm(218)
      • 1.6 mm(14)
      • 1.701 mm(68)
      • 1.75 mm(146)
      • 1.826 mm(78)
      • 1.951 mm(68)
      • 1.975 mm(78)
      • 2.0 mm(304)
      • 2.125 mm(158)
      • 2.2 mm(146)
      • 2.225 mm(146)
      • 2.25 mm(106)
      • 2.375 mm(99)
      • 2.401 mm(248)
      • 2.475 mm(79)
      • 2.5 mm(200)
      • 2.625 mm(1)
      • 2.676 mm(78)
      • 2.75 mm(146)
      • 2.801 mm(78)
      • 3.0 mm(336)
      • 3.051 mm(79)
      • 3.1 mm(156)
      • 3.125 mm(154)
      • 3.176 mm(411)
      • 3.2 mm(182)
      • 3.25 mm(146)
      • 3.276 mm(68)
      • 3.301 mm(128)
      • 3.325 mm(40)
      • 3.5 mm(183)
      • 3.6 mm(78)
      • 3.725 mm(36)
      • 3.801 mm(32)
      • 3.825 mm(36)
      • 3.85 mm(68)
      • 3.95 mm(89)
      • 3.975 mm(44)
      • 4.0 mm(237)
      • 4.101 mm(104)
      • 4.125 mm(129)
      • 4.25 mm(114)
      • 4.3 mm(78)
      • 4.5 mm(114)
      • 4.525 mm(78)
      • 4.7 mm(95)
      • 4.75 mm(121)
      • 4.775 mm(200)
      • 4.801 mm(119)
      • 4.875 mm(93)
      • 4.9 mm(102)
      • 4.95 mm(78)
      • 4.976 mm(78)
      • 5.0 mm(140)
      • 5.051 mm(49)
      • 5.101 mm(49)
      • 5.125 mm(143)
      • 5.4 mm(36)
      • 5.5 mm(36)
      • 5.525 mm(8)
      • 5.575 mm(36)
      • 6.0 mm(142)
      • 6.051 mm(52)
      • 6.125 mm(109)
      • 6.351 mm(187)
      • 6.476 mm(41)
      • 6.5 mm(88)
      • 7.0 mm(37)
      • 7.125 mm(45)
      • 7.325 mm(36)
      • 7.926 mm(59)
      • 7.95 mm(20)
      • 8.0 mm(52)
      • 8.05 mm(46)
      • 8.1 mm(18)
      • 8.125 mm(61)
      • 8.75 mm(3)
      • 9.0 mm(3)
      • 9.525 mm(29)
      • 9.65 mm(8)
      • 9.675 mm(3)
      • 9.701 mm(8)
      • 9.75 mm(8)
      • 10.0 mm(20)
      • 10.05 mm(8)
      • 10.125 mm(23)
      Cutting Width MinkomuCutting Width Max
      Front End Type
      Front End Type
      • MCS - Modular Cartridge System (79)
      Insert Shape
      Insert Shape
      • D-DIAMOND/RHOMBIC 55 (30)
      • K-PARALLELOGRAM 55 (13)
      • N/K-PARALLELOGRAM 55 (265)
      • PRISMATIC (978)
      • R-ROUND (105)
      • TN-TOP NOTCH (524)
      • V-DIAMOND/RHOMBIC 35 (157)
      Cartridge Size
      Cartridge Size
      • 50 (145)
      • 65 (32)
      Front End Style
      Front End Style
      • MCS01 Modular Deep Grooving (79)
      Insert Size
      Insert Size
      • 1 (5)
      • 10 (12)
      • 1F (12)
      • 2 (131)
      • 2S (11)
      • 3 (119)
      • 3S (8)
      • 4 (92)
      • 4S (1)
      • 5 (58)
      • 5S (1)
      • 6 (68)
      • 8 (30)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.0 in(29)
      • 0.04 in(1)
      • 0.063 in(2)
      • 0.067 in(1)
      • 0.07 in(2)
      • 0.075 in(1)
      • 0.116 in(2)
      • 0.121 in(1)
      • 0.13 in(1)
      • 0.138 in(40)
      • 0.185 in(1)
      • 0.197 in(11)
      • 0.21 in(39)
      • 0.244 in(1)
      • 0.25 in(2)
      • 0.276 in(37)
      • 0.293 in(8)
      • 0.294 in(15)
      • 0.3 in(1)
      • 0.315 in(10)
      • 0.334 in(4)
      • 0.354 in(1)
      • 0.394 in(29)
      • 0.416 in(3)
      • 0.433 in(4)
      • 0.473 in(61)
      • 0.5 in(8)
      • 0.531 in(9)
      • 0.548 in(2)
      • 0.551 in(98)
      • 0.572 in(4)
      • 0.63 in(76)
      • 0.669 in(41)
      • 0.69 in(3)
      • 0.748 in(22)
      • 0.75 in(18)
      • 0.787 in(26)
      • 0.842 in(2)
      • 0.866 in(32)
      • 0.946 in(29)
      • 1.0 in(6)
      • 1.024 in(67)
      • 1.25 in(6)
      • 1.26 in(26)
      • 1.5 in(3)
      • 1.575 in(12)
      • 1.95 in(2)
      • 2.25 in(2)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.0 mm(29)
      • 1.026 mm(1)
      • 1.6 mm(2)
      • 1.701 mm(1)
      • 1.776 mm(2)
      • 1.901 mm(1)
      • 2.95 mm(2)
      • 3.075 mm(1)
      • 3.301 mm(1)
      • 3.5 mm(40)
      • 4.7 mm(1)
      • 5.0 mm(11)
      • 5.325 mm(39)
      • 6.2 mm(1)
      • 6.351 mm(2)
      • 7.0 mm(37)
      • 7.45 mm(8)
      • 7.476 mm(15)
      • 7.625 mm(1)
      • 8.0 mm(10)
      • 8.475 mm(4)
      • 9.0 mm(1)
      • 10.0 mm(29)
      • 10.55 mm(3)
      • 11.0 mm(4)
      • 12.0 mm(61)
      • 12.701 mm(8)
      • 13.5 mm(9)
      • 13.925 mm(2)
      • 14.0 mm(98)
      • 14.5 mm(4)
      • 16.0 mm(76)
      • 17.0 mm(41)
      • 17.5 mm(3)
      • 19.0 mm(22)
      • 19.05 mm(18)
      • 20.0 mm(26)
      • 21.375 mm(2)
      • 22.0 mm(32)
      • 24.0 mm(29)
      • 25.401 mm(6)
      • 26.0 mm(67)
      • 31.75 mm(6)
      • 32.0 mm(26)
      • 38.1 mm(3)
      • 40.0 mm(12)
      • 49.526 mm(2)
      • 57.151 mm(2)
      Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
      Gage Length
      Gage Length
      • 6 in(8)
      • 7 in(4)
      • 1.102 in(2)
      • 1.299 in(2)
      • 1.496 in(2)
      • 1.693 in(2)
      • 1.85 in(6)
      • 1.891 in(6)
      • 1.929 in(4)
      • 2.106 in(4)
      • 2.185 in(2)
      • 2.244 in(6)
      • 2.283 in(6)
      • 2.303 in(7)
      • 2.382 in(2)
      • 2.5 in(14)
      • 2.579 in(2)
      • 2.618 in(4)
      • 2.697 in(4)
      • 2.894 in(4)
      • 5.439 in(3)
      • 5.463 in(4)
      • 5.482 in(4)
      • 5.508 in(12)
      • 5.529 in(10)
      • 5.533 in(7)
      • 5.906 in(4)
      • 6.226 in(2)
      • 6.25 in(4)
      • 6.271 in(4)
      • 6.534 in(2)
      • 6.694 in(3)
      Gage Length
      Gage Length
      • 47 mm(6)
      • 48 mm(6)
      • 57 mm(6)
      • 58 mm(6)
      • 150 mm(4)
      • 49 mm(4)
      • 170 mm(3)
      • 28 mm(2)
      • 33 mm(2)
      • 38 mm(2)
      • 43 mm(2)
      • 53.5 mm(4)
      • 55.5 mm(2)
      • 58.5 mm(7)
      • 60.5 mm(2)
      • 63.5 mm(14)
      • 65.5 mm(2)
      • 66.5 mm(4)
      • 68.5 mm(4)
      • 73.5 mm(4)
      • 138.15 mm(3)
      • 138.75 mm(4)
      • 139.25 mm(4)
      • 139.9 mm(12)
      • 140.4 mm(10)
      • 140.55 mm(7)
      • 152.4 mm(8)
      • 158.15 mm(2)
      • 158.75 mm(4)
      • 159.25 mm(4)
      • 165.951 mm(2)
      • 177.8 mm(4)
      Maximum Cutting Insert Depth
      Maximum Cutting Insert Depth
      • 1.651 mm(6)
      • 1.75 mm(6)
      • 1.901 mm(6)
      • 1.975 mm(8)
      • 2.475 mm(6)
      • 2.5 mm(2)
      • 2.551 mm(7)
      • 2.575 mm(8)
      • 2.725 mm(6)
      • 2.926 mm(18)
      • 3.45 mm(8)
      • 3.801 mm(30)
      • 4.075 mm(6)
      • 4.101 mm(1)
      • 4.15 mm(8)
      • 4.2 mm(1)
      • 4.4 mm(1)
      • 4.801 mm(6)
      • 4.9 mm(8)
      • 5.0 mm(1)
      • 5.301 mm(6)
      • 6.351 mm(1)
      • 6.4 mm(6)
      • 6.5 mm(8)
      • 7.301 mm(2)
      • 8.201 mm(5)
      Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
      Maximum Cutting Insert Depth
      Maximum Cutting Insert Depth
      • 0.065 in(6)
      • 0.069 in(6)
      • 0.075 in(6)
      • 0.078 in(8)
      • 0.097 in(6)
      • 0.098 in(2)
      • 0.1 in(7)
      • 0.101 in(8)
      • 0.107 in(6)
      • 0.115 in(18)
      • 0.136 in(8)
      • 0.15 in(30)
      • 0.16 in(6)
      • 0.161 in(1)
      • 0.163 in(8)
      • 0.165 in(1)
      • 0.174 in(1)
      • 0.189 in(6)
      • 0.193 in(8)
      • 0.197 in(1)
      • 0.209 in(6)
      • 0.25 in(1)
      • 0.252 in(6)
      • 0.256 in(8)
      • 0.288 in(2)
      • 0.323 in(5)
      Maximum Cutting Insert Depth MinkomuMaximum Cutting Insert Depth Max
      Minimum Groove Diameter
      Minimum Groove Diameter
      • 2.757 in(3)
      • 3.543 in(2)
      • 4.724 in(5)
      Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
      Minimum Groove Diameter
      Minimum Groove Diameter
      • 70.0 mm(3)
      • 90.0 mm(2)
      • 120.0 mm(5)
      Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
      insertGeometry
      Shape
      Shape
      • D-DIAMOND/RHOMBIC 55 (25)
      • K-PARALLELOGRAM 55 (9)
      • N/K-PARALLELOGRAM 55 (209)
      • PRISMATIC (355)
      • R-ROUND (52)
      • TN-TOP NOTCH (326)
      • V-DIAMOND/RHOMBIC 35 (122)
      Insert IC Size
      Insert IC Size
      • 4.75 mm(14)
      • 6.351 mm(27)
      • 9.525 mm(125)
      • 12.701 mm(35)
      Insert IC Size MinkomuInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.187 in(14)
      • 0.25 in(27)
      • 0.375 in(125)
      • 0.5 in(35)
      Insert IC Size MinkomuInsert IC Size Max
      Insert Seat Size
      Insert Seat Size
      • 10 (13)
      • 2 (79)
      • 2S (1)
      • 3 (266)
      • 3S (1)
      • 4 (152)
      • 5 (42)
      • 5S (1)
      • 6 (71)
      • 8 (55)
      Cutting Edge Length
      Cutting Edge Length
      • 0.25 mm(2)
      • 0.426 mm(2)
      • 11.05 mm(1)
      • 11.076 mm(11)
      • 11.601 mm(130)
      • 11.625 mm(6)
      • 15.451 mm(48)
      • 15.5 mm(25)
      • 16.6 mm(110)
      • 17.5 mm(9)
      • 22.725 mm(6)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.01 in(2)
      • 0.017 in(2)
      • 0.435 in(1)
      • 0.436 in(11)
      • 0.457 in(130)
      • 0.458 in(6)
      • 0.608 in(48)
      • 0.61 in(25)
      • 0.654 in(110)
      • 0.69 in(9)
      • 0.895 in(6)
      Cutting Edge Length MinkomuCutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • 08 (39)
      • 1 (7)
      • 15 (104)
      • 2 (2)
      • 20 (35)
      • 25 (13)
      • 32 (2)
      • FP (73)
      • FS (16)
      • HP (16)
      • MP (4)
      Cutting Tool Material
      Cutting Tool Material
      • B H (445)
      • B L (621)
      • C N (388)
      • D P (395)
      • H T (646)
      • H W (2034)
      Tolerance Class
      Tolerance Class
      • G (308)
      • M (65)
      • U (44)
      backEnd
      Connection Type
      Connection Type
      • BORING BAR (212)
      • BORING BAR HEAD (8)
      • SQUARE SHANK (538)
      System Size
      System Size
      • KM40TS (4)
      • KM4X63 (4)
      • KM50TS (8)
      • KM63TS (8)
      • KM63XMZ (11)
      • KM80ATC (8)
      • KM80TS (8)
      • PSC40 (4)
      • PSC50 (8)
      • PSC63 (8)
      • PSC80 (8)
      Back-End Diameter
      Back-End Diameter
      • 9.525 mm(1)
      • 10.0 mm(1)
      • 12.0 mm(11)
      • 12.701 mm(14)
      • 15.875 mm(16)
      • 16.0 mm(14)
      • 19.0 mm(1)
      • 19.05 mm(22)
      • 20.0 mm(18)
      • 25.0 mm(22)
      • 25.401 mm(26)
      • 31.701 mm(2)
      • 31.75 mm(11)
      • 32.0 mm(16)
      • 38.1 mm(12)
      • 40.0 mm(19)
      • 44.45 mm(3)
      • 50.0 mm(18)
      • 50.801 mm(9)
      • 57.151 mm(1)
      • 63.0 mm(31)
      • 63.5 mm(7)
      • 80.0 mm(24)
      Back-End Diameter MinkomuBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.375 in(1)
      • 0.394 in(1)
      • 0.473 in(11)
      • 0.5 in(14)
      • 0.625 in(16)
      • 0.63 in(14)
      • 0.748 in(1)
      • 0.75 in(22)
      • 0.787 in(18)
      • 0.984 in(22)
      • 1.0 in(26)
      • 1.248 in(2)
      • 1.25 in(11)
      • 1.26 in(16)
      • 1.5 in(12)
      • 1.575 in(19)
      • 1.75 in(3)
      • 1.969 in(18)
      • 2.0 in(9)
      • 2.25 in(1)
      • 2.48 in(31)
      • 2.5 in(7)
      • 3.15 in(24)
      Back-End Diameter MinkomuBack-End Diameter Max
      Shank Height
      Shank Height
      • 0.375 in(4)
      • 0.394 in(3)
      • 0.449 in(2)
      • 0.473 in(9)
      • 0.5 in(16)
      • 0.606 in(2)
      • 0.625 in(17)
      • 0.63 in(15)
      • 0.75 in(72)
      • 0.787 in(95)
      • 0.939 in(4)
      • 0.984 in(88)
      • 1.0 in(102)
      • 1.214 in(6)
      • 1.25 in(52)
      • 1.26 in(38)
      • 1.5 in(21)
      • 1.53 in(5)
      • 1.575 in(6)
      • 1.848 in(2)
      Shank Height MinkomuShank Height Max
      Shank Height
      Shank Height
      • 9.525 mm(4)
      • 10.0 mm(3)
      • 11.4 mm(2)
      • 12.0 mm(9)
      • 12.701 mm(16)
      • 15.4 mm(2)
      • 15.875 mm(17)
      • 16.0 mm(15)
      • 19.05 mm(72)
      • 20.0 mm(95)
      • 23.826 mm(4)
      • 25.0 mm(88)
      • 25.401 mm(102)
      • 30.826 mm(6)
      • 31.75 mm(52)
      • 32.0 mm(38)
      • 38.1 mm(21)
      • 38.825 mm(5)
      • 40.0 mm(6)
      • 46.95 mm(2)
      Shank Height MinkomuShank Height Max
      Shank Width
      Shank Width
      • 0.375 in(4)
      • 0.394 in(3)
      • 0.473 in(9)
      • 0.5 in(16)
      • 0.625 in(17)
      • 0.63 in(16)
      • 0.742 in(1)
      • 0.75 in(71)
      • 0.787 in(94)
      • 0.864 in(4)
      • 0.984 in(104)
      • 1.0 in(102)
      • 1.141 in(6)
      • 1.25 in(52)
      • 1.26 in(22)
      • 1.455 in(5)
      • 1.5 in(21)
      • 1.575 in(6)
      • 1.848 in(2)
      Shank Width MinkomuShank Width Max
      Shank Width
      Shank Width
      • 9.525 mm(4)
      • 10.0 mm(3)
      • 12.0 mm(9)
      • 12.701 mm(16)
      • 15.875 mm(17)
      • 16.0 mm(16)
      • 18.85 mm(1)
      • 19.05 mm(71)
      • 20.0 mm(94)
      • 21.951 mm(4)
      • 25.0 mm(104)
      • 25.401 mm(102)
      • 28.951 mm(6)
      • 31.75 mm(52)
      • 32.0 mm(22)
      • 36.95 mm(5)
      • 38.1 mm(21)
      • 40.0 mm(6)
      • 46.95 mm(2)
      Shank Width MinkomuShank Width Max
      No filters matching ""
      Profilování TOP NOTCH™

      Profilování TOP NOTCH™

      View Categories
      K-Lock™ Profiling

      K-Lock™ Profiling

      View Categories
      Beyond Evolution

      Beyond Evolution

      Beyond™ Evolution™ je jednostranný zapichovací a upichovací systém, který je možné využít pro vícesměrné soustružení. Konstrukce lůžka s trojitou klínovou drážkou Triple-V zajišťuje minimální vibrace.
      View Categories
      A4™ • Double-Ended Grooving

      A4™ • Double-Ended Grooving

      View Categories
      Drážkování TOP NOTCH™

      Drážkování TOP NOTCH™

      View Categories
      Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
      Select the destination where you want to move komu.
      Nové Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Zadejte platný název
      product-image
      Please adjust the following properties from

      Katalogové číslo ISO

      Katalogové číslo ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      Abyste viděli informace ve svém panelu, musíte být přihlášeni.
      Session expired due to inactivity, please login again
      Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
      položek bylo úspěšně přidáno do košíku
      Zobrazit košík

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberKatalogové číslo ISOKarbid  

      You are about to leave the Solution building process.

      Are you sure you want to leave?