BF Bodies
BF combination tool bodies can be used for drilling and countersinking all in a single operation. These BF toolholders are engineered to achieve high speeds and feeds. They are applicable for solid carbide drills and KenTIP™ FS modular drills. The FB bodies benefit from the modular system when adjusting the drill length or insert style to manufacture different geometries.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (46)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(46)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(46)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(46)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(46)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(46)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(46)
- M Stainless Steel (46)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(46)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(46)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(46)
- K Cast Iron (46)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
- N Non-Ferrous Materials (46)
- N1Wrought Aluminum (46)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(46)
- N3High-Silicon Aluminum Alloys Si >12.2%(46)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (46)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (46)
- N6Carbon, Graphite Composites, CFRP (46)
- N7MMC's (46)
- S High-Temp Alloys (46)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(46)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(46)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(46)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(46)
Applications
Applications
Countersinking (46)
Drilling (46)
Inclined Exit Drilling (46)
Stacked Plates Drilling (46)
Cutting Diameter
Cutting Diameter
- 0.125 in(1)
- 0.134 in(1)
- 0.161 in(2)
- 0.181 in(2)
- 0.182 in(1)
- 0.201 in(2)
- 0.213 in(1)
- 0.219 in(2)
- 0.24 in(2)
- 0.25 in(1)
- 0.281 in(1)
- 0.288 in(2)
- 0.319 in(3)
- 0.328 in(1)
- 0.358 in(2)
- 0.359 in(1)
- 0.398 in(2)
- 0.408 in(1)
- 0.437 in(3)
- 0.48 in(2)
- 0.484 in(1)
- 0.516 in(3)
- 0.555 in(2)
- 0.564 in(1)
- 0.61 in(2)
- 0.625 in(1)
- 0.65 in(1)
- 0.69 in(2)
to
Cutting Diameter
Cutting Diameter
- 3.176 mm(1)
- 3.401 mm(1)
- 4.101 mm(2)
- 4.601 mm(2)
- 4.625 mm(1)
- 5.101 mm(2)
- 5.4 mm(1)
- 5.551 mm(2)
- 6.101 mm(2)
- 6.351 mm(1)
- 7.15 mm(1)
- 7.301 mm(2)
- 8.1 mm(3)
- 8.326 mm(1)
- 9.1 mm(2)
- 9.125 mm(1)
- 10.101 mm(2)
- 10.326 mm(1)
- 11.101 mm(3)
- 12.201 mm(2)
- 12.3 mm(1)
- 13.101 mm(3)
- 14.101 mm(2)
- 14.3 mm(1)
- 15.5 mm(2)
- 15.875 mm(1)
- 16.5 mm(1)
- 17.5 mm(2)
to
Connection Style
Connection Style
- Straight-Cylindrical (29)
- Whistle Notch 2 (17)
Number of Flutes
Number of Flutes
- 1 (21)
- 2 (25)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (31)
- 1.0 (46)
to
Over All Length [L]
Over All Length [L]
- 3.446 in(12)
- 3.831 in(9)
- 4.311 in(1)
- 4.622 in(6)
- 5.005 in(9)
- 5.016 in(8)
- 5.142 in(1)
to
Over All Length [L]
Over All Length [L]
- 87.5 mm(12)
- 97.301 mm(9)
- 109.5 mm(1)
- 117.4 mm(6)
- 127.101 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CD3 (46)
- CS5 (46)
- KC7315 (46)
- KC7320 (9)
- KC7410 (31)
- KCP15 (31)
- KCPM45 (31)
- KM1 (46)
- KMF (46)
- P30 (46)
Countersunk Angle
Countersunk Angle
- 30.0 (46)
- 41.0 (46)
- 45.0 (46)
- 50.0 (22)
to
Front-End
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (46)
- KENTIP DRILL (31)
Back-End
Back-End Diameter
Back-End Diameter
- 19.05 mm(5)
- 20.0 mm(16)
- 25.401 mm(5)
- 31.75 mm(3)
- 32.0 mm(17)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(5)
- 0.787 in(16)
- 1.0 in(5)
- 1.25 in(3)
- 1.26 in(17)
to
No filters matching ""
