Wedgelock
Here at Kennametal, we understand the importance of staying ahead of the competition. Our world-class wedge locks minimize vibration across all workpiece materials. These wedgelock inserts produce accurate and consistent turning and profiling cuts. If success depends on using OD & ID turning tools, you will notice an immediate improvement with a wedgelock upgrade. Additionally, our KM quick-change tools help you control downtime and improve operations..
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (23)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(23)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(23)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(23)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(23)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(23)
- M Stainless Steel (23)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(23)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(23)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(23)
- K Cast Iron (23)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
- N Non-Ferrous Materials (23)
- N1Wrought Aluminum (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
- N3High-Silicon Aluminum Alloys Si >12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
- N6Carbon, Graphite Composites, CFRP (23)
- N7MMC's (23)
- S High-Temp Alloys (23)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(23)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(23)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(23)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(23)
- H Hardened Materials (23)
- H1Hardened Materials 44-48 HRC(23)
- H2Hardened Materials 48-55 HRC(23)
- H3Hardened Materials 56-60 HRC(23)
- H4Hardened Materials >60 HRC(16)
- C CFRP Materials (23)
- C1CFRP, CFRP / CFRP (23)
- C2CFRP / Aluminium CFRP / Non-Ferrous (23)
Applications
Applications
Facing (9)
Multiple Direction Cutting (11)
Profiling (22)
Turning (22)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (23)
- Lightly Interrupted Cut (23)
- Smooth Cut (23)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 60.0 (1)
- 93.0 (13)
- 95.0 (8)
- 105.0 (1)
to
Connection Style
Connection Style
- KM (2)
- Toolholder (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (16)
- 3.0 (23)
- 6.0 (23)
to
Over All Length [L]
Over All Length [L]
- 1.575 in(2)
- 4.921 in(4)
- 5.906 in(6)
- 6.0 in(6)
- 6.694 in(5)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(2)
- 125.0 mm(4)
- 150.0 mm(6)
- 152.4 mm(6)
- 170.0 mm(5)
to
Corner Radius
Corner Radius
- 0.004 in(8)
- 0.008 in(16)
- 0.016 in(23)
- 0.024 in(8)
- 0.031 in(23)
- 0.047 in(23)
- 0.063 in(23)
- 0.095 in(7)
- 0.125 in(7)
- 0.126 in(7)
to
Corner Radius
Corner Radius
- 0.1 mm(8)
- 0.2 mm(16)
- 0.4 mm(23)
- 0.601 mm(8)
- 0.8 mm(23)
- 1.201 mm(23)
- 1.6 mm(23)
- 2.401 mm(7)
- 3.176 mm(7)
- 3.2 mm(7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (2)
- CW5025 (2)
- K313 (23)
- K68 (15)
- KB1345 (8)
- KB1610 (16)
- KB1630 (8)
- KBH10 (16)
- KBH10B (8)
- KBH20 (16)
- KBH20B (8)
- KC5010 (23)
- KC5025 (23)
- KC5410 (23)
- KC730 (23)
- KC850 (23)
- KC9125 (8)
- KCK05 (16)
- KCK05B (16)
- KCK15 (23)
- KCK15B (23)
- KCK20 (23)
- KCK20B (23)
- KCM15 (23)
- KCM15B (23)
- KCM25 (23)
- KCM25B (23)
- KCM35 (23)
- KCM35B (16)
- KCP05 (16)
- KCP05B (23)
- KCP10 (23)
- KCP10B (23)
- KCP25 (23)
- KCP25B (23)
- KCP25C (23)
- KCP30 (23)
- KCP30B (23)
- KCP40 (23)
- KCP40B (23)
- KCPK05 (16)
- KCS10B (16)
- KCU10 (23)
- KCU10B (23)
- KCU25 (23)
- KCU25B (23)
- KD1400 (8)
- KD1425 (16)
- KT315 (16)
- KTP10 (16)
- KTP25S (16)
- KY3500 (16)
- KY4400 (23)
- KYHK15B (23)
- KYK10 (8)
- KYK25 (8)
- KYS30 (8)
- THM (2)
- THMF-X (2)
- TN10P (2)
- TN10U (2)
- TN15M (2)
- TN15U (2)
- TN2000 (2)
- TN20K (2)
- TN20P (2)
- TN30M (2)
- TN30P (2)
- TN4000 (2)
- WBH20P (2)
- WDN25U (2)
- WK05CT (2)
- WK15CT (2)
- WK20CT (2)
- WM15CT (2)
- WM25CT (2)
- WM35CT (2)
- WP15CT (2)
- WP25CT (2)
- WP35CT (2)
- WS10PT (2)
- WS25PT (2)
- WU10HT (2)
- WU10PT (2)
- WU25PT (2)
Hand Of Tool
Hand Of Tool
- L (10)
- N (1)
- R (12)
Wiper Insert
Wiper Insert
- N (23)
- Y (16)
F Dimension
F Dimension
- 12.701 mm(1)
- 25.0 mm(4)
- 27.0 mm(2)
- 31.75 mm(5)
- 32.0 mm(11)
to
F Dimension
F Dimension
- 0.5 in(1)
- 0.984 in(4)
- 1.063 in(2)
- 1.25 in(5)
- 1.26 in(11)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.63 in(1)
to
Cutting Direction
Cutting Direction
- B (8)
- E (1)
- S (14)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (22)
- NEGATIVE-ZERO (1)
Maximum Bore Depth
Maximum Bore Depth
- 1.891 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 48.0 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (1)
Front-End
Clamp Style
Clamp Style
- M (15)
- W (8)
Insert Shape
Insert Shape
- T-TRIANGLE 60 (15)
- W-TRIGON 80 (8)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (16)
- B L (16)
- C A (23)
- C N (16)
- D P (16)
- H T (16)
- H W (23)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (21)
- TAPER SHANK (2)
System Size
System Size
- KM40TS (2)
Back-End Diameter
Back-End Diameter
- 12.0 mm(1)
- 40.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.473 in(1)
- 1.575 in(2)
to
Shank Height
Shank Height
- 0.787 in(4)
- 0.984 in(6)
- 1.0 in(6)
- 1.26 in(5)
to
Shank Height
Shank Height
- 20.0 mm(4)
- 25.0 mm(6)
- 25.401 mm(6)
- 32.0 mm(5)
to
Shank Width
Shank Width
- 0.787 in(4)
- 0.984 in(11)
- 1.0 in(6)
to
Shank Width
Shank Width
- 20.0 mm(4)
- 25.0 mm(11)
- 25.401 mm(6)
to
No filters matching ""
