Face Mills • BB KSRM • RCGX64... • Inch
Produkt ähnlich wie:
Face Mills • BB KSRM • RCGX64... • Inch
Face Mills
Material Nummer100003967
Kontaktieren Sie unser Verkaufsteam, um alle Ihre Preisoptionen zu erfahren.
Features and benefits
- Use PCT technology, coolant through the insert.
- Engineered to provide the maximum performance in titanium machining.
- Anti-rotation feature enables up to six indexables rotations.
- Pocketing, ramping, plunging, and helical interpolations capabilities.
- High coolant pressure capabilities.
Planfräsen
Spiralförmiges Interpolieren
Schräg-Eintauchfräsen Ins Volle
Nutenfräsen: Kugelkopf / Vollradius
Umfangfräsen/Schulterfräsen: Kugelkopf / Vollradius
3D-Profilfräsen/Kopierfräsen
Fräsen – Innere Kühlmittelzuführung
Fräsen – Eckfräsen
Auskammern
| Werkstoffgruppe | Leichte Bearbeitung | Allgemeine Anwendung | Schruppbearbeitung | |||
| – | (Leicht schneidende Geometrie) | – | (Stabile Geometrie) | |||
| – | Verschleiß- festigkeit |  | Zähigkeit | |||
| – | Geometrie | Sorte | Geometrie | Sorte | Geometrie | Sorte |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | .E..LF | KC725M | .S..GF | KC725M | .S..GF | KC725M |
| H1 | – | – | – | – | – | – |
| Schneidkörper- Geometrie | Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in % | Schneidkörper- Geometrie | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .007 | .014 | .020 | .005 | .010 | .015 | .004 | .009 | .013 | .004 | .008 | .012 | .004 | .008 | .012 | .E..LF |
| .S..GF | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..GF |
| Leichte Bearbeitung | Allgemeine Anwendung | Schruppbearbeitung |
| Schneidkörper- Geometrie | Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in % | Schneidkörper- Geometrie | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .008 | .016 | .024 | .006 | .012 | .017 | .005 | .010 | .015 | .005 | .010 | .014 | .005 | .009 | .014 | .E..LF |
| .S..GF | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..GF |
| Schneidkörper- Geometrie | Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in % | Schneidkörper- Geometrie | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .014 | .029 | .043 | .010 | .021 | .031 | .009 | .018 | .027 | .008 | .017 | .025 | .008 | .017 | .025 | .E..LF |
| .S..GF | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..GF |
| Schneidkörper- Geometrie | Empfohlener Start-Vorschub pro Zahn (fz) im Verhältnis zur radialen Schnitttiefe (ae) in % | Schneidkörper- Geometrie | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .010 | .021 | .031 | .008 | .015 | .023 | .007 | .013 | .020 | .006 | .013 | .019 | .006 | .012 | .018 | .E..LF |
| .S..GF | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..GF |
Recommended Starting Speeds [SFM]
| Werkstoffgruppe | KC725M | |||
| P | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| 5 | – | – | – | |
| 6 | – | – | – | |
| M | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| K | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| N | 1 | – | – | – |
| 2 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | 240 | 180 | 120 | |
| H | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
Ramping and Helical Interpolation Values from Solid
| Wendeschneidplatte IC | Katalognummer | Max. Tauchwinkel | max. Schräg- Eintauchtiefe | max. Eintauchtiefe | min. Bohrungs- durchmesser (DH min) | max. Flachbohrungs- durchmesser (DH1 max) | max. Bohrungsdurchmesser (keine Flachbohrung) |
| RCGX64 | KSRM200R64BB03W150L200 | 1.27° | 0.025 | 0.045 | 2.989 | 3.253 | 4.000 |
| RCGX64 | KSRM250R64BB04S075L200 | 1.27° | 0.035 | 0.058 | 3.939 | 4.253 | 5.000 |
| RCGX64 | KSRM300R64BB05S100L200 | 1.22° | 0.044 | 0.068 | 4.904 | 5.253 | 6.000 |
| RCGX64 | KSRM400R64BB05S125L200 | 1.12° | 0.060 | 0.084 | 6.850 | 7.253 | 8.000 |
| RCGX64 | KSRM400R64BB06S125L200 | 0.73° | 0.039 | 0.083 | 6.921 | 7.253 | 8.000 |
| RCGX64 | KSRM500R64BB06S150L250 | 1.00° | 0.071 | 0.094 | 8.818 | 9.253 | 10.000 |
| RCGX64 | KSRM500R64BB08S150L250 | 0.98° | 0.069 | 0.092 | 8.823 | 9.253 | 10.000 |
| RCGX64 | KSRM600R64BB07S150L250 | 0.90° | 0.079 | 0.101 | 10.795 | 11.253 | 12.000 |
| RCGX64 | KSRM600R64BB08S150L250 | 0.90° | 0.079 | 0.100 | 10.796 | 11.253 | 12.000 |
| RCGX64 | KSRM800R64BB09S250L250 | 0.74° | 0.091 | 0.111 | 14.766 | 15.253 | 16.000 |