Produkt ähnlich wie:
K105 (~5 x D) • K10 • A-Schaft • Bohrer Typ TF
Bohrer Typ TF • Hohe Zerspanungsvolumen • Keine innere Kühlmittelzuführung
Material Nummer100003651
Features and benefits
- TF drills without through coolant for high metal removal rates and excellent hole quality in short chipping materials such as gray cast iron, ductile iron, and aluminum, as well as in short-hole titanium applications.
- Material-specific SC drill with three cutting edges for higher feed rates than with two-edged drills.
- Three spacious flutes for rapid chip evacuation.
- Three-margin lands deliver better hole quality and straightness than two-flute drills.
- TiAlN-coated KC7210™ grade for higher wear resistance at elevated speeds.
- Uncoated K10™ grade helps to prevent built-up edge in drilling aluminum and high-temp alloys.
- Bohren
- Bohren: Schräge Austrittsfläche
- Außenkühlung: Bohren
- Zylinderschaft – ohne Spannfläche ≤h6
- Spiralwinkel: 30°
- Bohrtiefe: 5x
- Drilling: Cross-Hole Drilling
Toleranz • Zoll | ||
Nenndurchmesserbereich | D1 Toleranz m7 | D Toleranz h6 |
.0002/.0006 | .0000/-.0003 | |
.0002/.0008 | .0000/-.0004 | |
.0003/.0010 | .0000/-.0004 | |
.0003/.0011 | .0000/-.0005 |
Toleranz • Metrisch | ||
Nenndurchmesserbereich | D1 Toleranz m7 | D Toleranz h6 |
0,004/0,016 | 0,000/-0,008 | |
0,006/0,021 | 0,000/-0,009 | |
0,007/0,025 | 0,000/-0,011 | |
0,008/0,029 | 0,000/-0,013 |
Bohrer Typ TF • B105 • Sorte K10™ • Außenkühlung • Bohrerdurchmesser 0,1181-0,7874″ • Zoll
Werkstoffgruppe | |||||||||||||
Schnittgeschwindigkeit | Metrisch | ||||||||||||
Bereich | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
Min. | Startwert | Max. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
K | 1 | 60 | 85 | 110 | mm/U | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 70 | 90 | mm/U | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 50 | 70 | mm/U | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,02–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/U | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | 0,03–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 250 | 250 | mm/U | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
3 | 100 | 180 | 400 | mm/U | 0,09–0,16 | 0,10–0,20 | 0,12–0,26 | 0,16–0,36 | 0,20–0,40 | 0,24–0,45 | 0,30–0,50 | 0,34–0,60 | |
4 | 60 | 170 | 250 | mm/U | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 20 | 20 | 50 | mm/U | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
Werkstoffgruppe | |||||||||||||
Werkstoffgruppe | Schnittgeschwindigkeit | Zoll | |||||||||||
Bereich | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
Min. | Startwert | Max. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
K | 1 | 200 | 280 | 360 | IPR | .004–.008 | .005–.008 | .006–.011 | .008–.014 | .009–.017 | .009–.020 | .011–.024 | .012–.027 |
2 | 230 | 230 | 300 | IPR | .004–.008 | .005–.008 | .006–.011 | .008–.014 | .009–.017 | .009–.020 | .011–.024 | .012–.027 | |
3 | 160 | 160 | 230 | IPR | .004–.007 | .004–.007 | .006–.010 | .007–.013 | .001–.016 | .009–.019 | .010–.023 | .011–.026 | |
N | 1 | 330 | 690 | 1340 | IPR | .004–.006 | .004–.008 | .007–.013 | .008–.015 | .010–.017 | .001–.020 | .017–.023 | .025–.031 |
2 | 330 | 820 | 820 | IPR | .004–.008 | .005–.008 | .007–.013 | .010–.017 | .012–.020 | .014–.023 | .017–.029 | .021–.035 | |
3 | 330 | 590 | 1310 | IPR | .004–.006 | .004–.008 | .005–.010 | .006–.014 | .008–.016 | .009–.018 | .012–.020 | .013–.024 | |
4 | 200 | 560 | 820 | IPR | .003–.006 | .005–.007 | .007–.013 | .008–.014 | .009–.015 | .013–.018 | .015–.019 | .023–.030 | |
S | 4 | 70 | 70 | 160 | IPR | .001–.002 | .002–.003 | .003–.004 | .004–.005 | .004–.006 | .005–.007 | .007–.009 | .009–.012 |
Schnittgeschwindigkeit | Metrisch | ||||||||||||
Bereich | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
Werkstoffgruppe | Min. | Startwert | Max. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
K | 1 | 60 | 85 | 110 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 72 | 90 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 51 | 70 | mm/dev | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | ,020–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/dev | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | ,033–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 248 | 250 | mm/dev | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
4 | 60 | 173 | 250 | mm/dev | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 30 | 20 | 51 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
Werkstoffgruppe | |||||||||||||
Werkstoffgruppe | Schnittgeschwindigkeit | Zoll | |||||||||||
Bereich | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
Min. | Startwert | Max. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
S | 4 | 70 | 100 | 160 | IPR | – | – | .001–.003 | .001–.003 | .001–.003 | .003–.006 | .003–.006 | – |
Werkstoffgruppe | |||||||||||||
Schnittgeschwindigkeit | Metrisch | ||||||||||||
Bereich | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
Min. | Startwert | Max. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
S | 4 | 20 | 30 | 50 | mm/U | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |
Schnittgeschwindigkeit | Metrisch | ||||||||||||
Bereich | Empfohlene Vorschubrate (f) pro Umdrehung | ||||||||||||
Werkstoffgruppe | Min. | Startwert | Max. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
S | 4 | 20 | 30 | 50 | mm/dev | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |