Drilling: Stacked Plates
Perçage
Perçage : Sortie inclinée
Dimensions de l'outil : 2 goujures/4 listels/lubrifiant
DIN 6535
Perçage — Arrosage interne
Arrosage interne : MQL (Quantité minimale de lubrification) : Perçage
Queue — Cylindrique Classique ≤h6
Angle d'hélice : 30°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 3867716 |
| Ref. ISO Catalogue | B271Z03175HPS |
| Ref. ANSI Catalogue | B271Z03175HPS |
| Nuance | KN25 |
| [D1] Diamètre de foret M | 3.175 mm |
| [D1] Diamètre de foret M | .125 in |
| [L] Longueur totale | 105 mm |
| [L] Longueur totale | 4.133 in |
| [L3] Longueur de goujures | 67 mm |
| [L3] Longueur de goujures | 2.637 in |
| [L4] Profondeur de perçage maximale | 58 mm |
| [L4] Profondeur de perçage maximale | 2.283 in |
| [L5] Longueur de pointe du foret | 0.59 mm |
| [L5] Longueur de pointe du foret | .0232 in |
| [LS] Longueur de la queue | 32 mm |
| [LS] Longueur de la queue | 1.259 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 4 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .1575 in |
Drilling: Stacked PlatesPerçagePerçage : Sortie inclinéeDimensions de l'outil : 2 goujures/4 listels/lubrifiantDIN 6535Perçage — Arrosage interneArrosage interne : MQL (Quantité minimale de lubrification) : PerçageQueue — Cylindrique Classique ≤h6Angle d'hélice : 30°Drilling: Cross-Hole DrillingCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| TOLERANCE • Inch | ||||
| Drills *HPG, *SGL, *HPR | Drills *HPS | |||
| nominal size range | D1 tolerance h7 | D tolerance h6 | D1 tolerance h8 | D tolerance h6 |
| .0394 to .1181 | .0000/-.0004 | .0000/-.0002 | .0000/-.0006 | .0000/-.0002 |
| .1181 to .2362 | .0000/-.0005 | .0000/-.0003 | .0000/-.0007 | .0000/-.0003 |
| .2362 to .3937 | .0000/-.0006 | .0000/-.0004 | .0000/-.0009 | .0000/-.0004 |
| .3937 to .7087 | .0000/-.0007 | .0000/-.0004 | .0000/-.0011 | .0000/-.0004 |
| TOLERANCE • Metric | ||||
| Drills *HPG, *SGL, *HPR | Drills *HPS | |||
| nominal size range | D1 tolerance h7 | D tolerance h6 | D1 tolerance h8 | D tolerance h6 |
| .0394 to .1181 | 0,000/-0,010 | 0,000/-0,006 | 0,000/-0,014 | 0,000/-0,006 |
| .1181 to .2362 | 0,000/-0,012 | 0,000/-0,008 | 0,000/-0,018 | 0,000/-0,008 |
| .2362 to .3937 | 0,000/-0,015 | 0,000/-0,009 | 0,000/-0,022 | 0,000/-0,009 |
| .3937 to .7087 | 0,000/-0,018 | 0,000/-0,011 | 0,000/-0,027 | 0,000/-0,011 |
| Malzeme grubu |  |  | |||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| N | 1 | 120 | 200 | 300 | mm/dev | 0,12 | 0,13 | 0,15 | 0,19 | 0,26 | 0,31 | 0,35 | 0,41 |
| 2 | 120 | 170 | 300 | mm/dev | 0,13 | 0,14 | 0,16 | 0,20 | 0,28 | 0,33 | 0,38 | 0,44 | |
| 3 | 100 | 150 | 300 | mm/dev | 0,13 | 0,14 | 0,16 | 0,20 | 0,28 | 0,33 | 0,38 | 0,44 | |
| 4 | 80 | 200 | 300 | mm/dev | 0,03 | 0,03 | 0,03 | 0,04 | 0,05 | 0,05 | 0,05 | 0,06 | |
| Malzeme grubu | | | |||||||||||
| Malzeme grubu | Kesme hızı | İnç | |||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 0.551 | 5/8 .625 | |||
| N | 1 | 390 | 660 | 980 | IPR | .005–.007 | .005–.007 | .006–.009 | .008–.011 | .010–.014 | .012–.016 | .014–.018 | .016–.020 |
| 2 | 390 | 560 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 3 | 330 | 490 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 4 | 260 | 660 | 980 | IPR | .001–.002 | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.003 | .002–.004 | |
| | ||||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | ||
| N | 1 | 120 | 200 | 300 | mm/dev | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/dev | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/dev | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/dev | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?