Tangential Shoulder Milling

  • Mill 4-12KT requires up to 15% less horsepower, enabling increased feed rates, even on 40 taper machines.
  • The proprietary insert design — featuring a triangular shaped margin — provides unprecedented stability in steel and cast iron applications.
  • Excellent floor finishes due to minimal axial runout.
  • With 7 grades, 7 corner radii, and depth-of-cut range up to .472" (12mm), the program offers versatility to cover many shoulder milling applications.
  • Left hand inserts with multiple corner nose radii for tailormade slot mills.
  • Fine pitch cutters for high productivity with low radial depth of cut (ae) when roughing and finishing in cast iron.
  • Reinforced HD Geometry inserts provide higher stability and lower risk of breakage in heavy and interrupted cuts.
  • NEW PSTS Inserts - Precision pressed PU Geometry for the lowest cost per cutting edge. Strong cutting edges for higher productivity and increased MRRs.

Handle Severly Interrupted Cuts with Ease

The strong cutting edge of the Mill 4-12KT inserts were designed to overcome challenging applications, heavy cuts and the most severe interruptions. Even after cutting "Swiss cheese," there was no visible wear and no chipping. If you have challenging applications to overcome, then this tangential milling cutter is the way to go.

Watch the video to see for yourself.

KMT_Innov20_IndexableMilling_006_007_EN_me.indd

Higher MRR & Lower Tool Costs 

Challenge: Improve cost-per-part (CPP) by increasing productivity when milling a dry roughing to finishing application.

Solution: Mill 4-12KT

Results: Increased chip load per tooth for higher MRR and improved surface finish without compromising tool life. Mill 4-12KT also lowered tool cost due to less inserts per load and had better repeatability.

Read the full story
Select Filters
Filters
    View filters in
    Metric
    Inch
    Workpiece Material
    Workpiece Material
    Applications
    Applications
    • Face MillingFace Milling (40)
    • Shoulder MillingShoulder Milling (40)
    • Shoulder RoughingShoulder Roughing (27)
    • Shoulder Square EndShoulder Square End (13)
    Cutting Diameter
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length MintoCutting Length Max
    Reach
    Reach MintoReach Max
    Reach
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (29)
    • B-Cutter Retention Screw (5)
    • C-Bolt Circle (6)
    Number of Flutes
    Number of Flutes
    • 10 (2)
    • 11 (4)
    • 12 (4)
    • 14 (2)
    • 16 (6)
    • 18 (2)
    • 22 (1)
    • 4 (2)
    • 5 (4)
    • 6 (4)
    • 7 (3)
    • 8 (4)
    • 9 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L] MintoOver All Length [L] Max
    Corner Radius
    Corner Radius
    • 0.016 in(46)
    • 0.031 in(67)
    • 0.047 in(51)
    • 0.061 in(56)
    • 0.078 in(49)
    • 0.094 in(45)
    • 0.125 in(46)
    Corner Radius
    Corner Radius
    • 0.4 mm(46)
    • 0.8 mm(67)
    • 1.201 mm(51)
    • 1.55 mm(56)
    • 1.975 mm(49)
    • 2.375 mm(45)
    • 3.176 mm(46)
    No filters matching ""

    For any technical inquiries, please reach out to us via our Customer Support center

    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)